REPAIRS UPHOLSTER OF SOFA SETS CHAIR COMPUTERS REVOLVING AND REPAIRS TO CHARPOY GI CHARPOY IP FOLDING TABLE COMPUTER AND PAINTING POLISHING TO STEEL WOODEN FURNITURE AT ARAKKONAM

Amount

Sofa set (3+1+1) seater: Removing the existing worn out tapestry cloth cover of cushion from sofa set 5 Seater (3+1+1) and replacing with new tapestry cloth of best quality as approved by Engr-in-charge. Old cushion to be replaced with cushion of size (570x520x100)mm made of polyurethane foam of 40 density duly covered with kora cloth. Also provision to open the cover using zip of good quality to be provided. Rest all as specified and directed by Engr-in-Charge .Drg No.FD-258/281/373 Make of cushion : Sleepwell/Kurlon/Kings

Sofa set (2+1+1) seater: Removing the existing worn out tapestry cloth cover of cushion from sofa set 4 Seater (2+1+1) and replacing with new tapestry cloth of best quality as approved by Engr-in-charge. Old cushion to be replaced with cushion of size (570x520x100)mm made of polyurethane foam of 40 density duly covered with kora cloth. Also provision to open the cover using zip of good quality to be provided. Rest all as specified and directed by Engr-in-Charge .Drg No.FD-258/281/373 Make of cushion : Sleepwell/Kurlon/Kings

Removing the existing unserviceable /broken components from sofa 5/4 seater and replacing the same with first class hard wood (Teak wood) including polishing of any size and shape for the follwing complete all as specified directed by the Engr-in-Charge.Drg No FD-258

(a) Front leg

(b) Rear leg

(c) Handle

(d ) Side Rail

(e) Front/Back rail of 3/2 Seater

(f) Front/Back rail of Single Seater

(g) Ply wood 12 mm thick for 3 seater

(g) Ply wood 12 mm thick for 2 seater

(h) Ply wood 12 mm thick for Single seater

GI Charpoy/IP PIPE WITH PLY TOP: Removing existing unserviceable long rail of GI Charpoy pipe and replacing with new long rail of GI 32 mm dia medium grade ISI marked of approved make duly threaded at both side complete all as specified and as directed by Engr-in-Charge. Make : PrakashSurya/Jindal/TATA . Drg No.FD-220

Removing existing unserviceable short rails from GI Charpoy and making short rail from existing long rail removed from Item Sl No.2.00 by cutting serviceable portion into a required size as per drawing and fixing with charpoy duly threaded on both sides of the pipe complete all as specified and as directed by Engr-in-Charge .Drg No.FD-220

Removing existing unserviceable legs from GI Charpoy and making leg from short rail removed from Item Sl No.2.01 by cutting serviceable portion into a required size and bottom of leg shall be plugged with 3 mm thick mild steel plate & welded to bottom of legs. Two nos of flat iron 25 x 3mm MS clamp made to shape shall be welded to GI Legs as shown on drawing and fixing to frame of GI charpoy duly threaded complete as specified by Engr-in-Charge .Drg No.FD-220

Removing existing unserviceable 3 way Elbow and re-fixing with new 3 way elbow 32mm dia with ISI mark complete all as specified and directed by Engr-in-Charge Drg No.FD-220

Removing existing unserviceable check nuts and supply and fix with new GI check nuts all as specified and as directed by Engineer-in-charge. Drg No.FD-220

Supply and fix in repair 12mm thick plywood BWR grade type 'BB' of size 1980x915 mm for GI Charpoy/ IP plywood Top complete all as specified and as directed by Engr-in-Charge Drawing-FD-220 & FD/MAP-II/01. Make : Greenply/Century/Archid ply/Kitply

CHARPOY IP FOLDING : Removal of existing old/damaged commercial ply and supply and fix 12 mm thick plywood of size 900x900 mm(02 Pieces) with suitable nut and screw for charpoy IP folding and two coats of synthetic enamel black paint for legs and frame. U shaped frame shall be joined by flat iron gusset pipe plate 02 Nos cut to shape out of 140x110x3mm mild steel sheet and 8 mm dia rivets complete all as specified and as directed by Engr-in-Charge. Make : Greenply/Century/Archid ply/Kitply Drg No : FD-338

CHAIR COMPUTER : Removing the existing unserviceable /broken components from Chair Computer and replacing the same with new components for the follwing complete all as specified directedby the Engr-in-Charge.Drg No TP

(a) Wheel (Set of 5)

(b) Base without wheel

(c ) Hydraulic Pressure System

(d) Seat Ply wood 12 mm thick

(e) Back Ply wood 12 mm thick

(f) Foam 50 mm thick for Seat

(g) Foam 50 mm thick for Back

(h) Removing the existing worn/torn out cloth & cushion covering seat and back of Chair Computer and replacing with new cushion and tapestry cloth of best quality & as approved by Engr-in-charge. Rest all as specified and directed by Engr-in-Charge .Drg No : TP

(j) Handle(Pair)

CHAIR EXECUTIVE:Removing the existing unserviceable /broken components from Chair Executive Revolving/Chair Revolving and replacing the same with new components for the follwing complete all as specified directedby the Engr-in-Charge.Drg No TP

(a) Wheel heavy duty (Set of 5)

(b) Base without wheel

(c ) Hydraulic Pressure System Heavy Duty

(d) Seat Ply wood 12 mm thick

(e) Back Ply wood 12 mm thick

(f) Foam 50 mm thick for Seat

(g) Foam 50 mm thick for Back

(h) Removing the existing worn/torn out cloth covering seat and back of Chair Executive and replacing cushion and cloth with new cushion and tapestry cloth/Rexine and colour shall be as approved by GE all as specified and directed by Engr-in-Charge .Drg No : TP

(j) Handle(Pair)

Preparation of following steel furniture by scrapping down the entire old paint , applying putty to obtain even surface and applying two coats of synthetic enamel paint of Olive Green/ Olive Gray shade using spray painting machine over a coat of red oxide primer to internal and external surfaces etc., complete all as specified and as directed by Engr-in-charge.

Almirah large steel with shelves. Drg No: FD-67

Almirah medium/small steel. Drg No: FD-243/1032/114M

Almirah large with glass door. Drg No: FD-104

Almirah Med with glass door. Drg No: FD-104

Rack pegion hole. Drg No: FD-106

Rack six tier adjustable. Drg No: FD-106(M)

Stool steel 305 x305 x510mm Drg No: FD-81(M)

Rack stationery. Drg No: FD-81(M)

Rack side 3 tray. Drg No: FD-97(M)

Book case. Drg No: FD-90

Chair Easy steel with Cushion Drg No: FD-358

Chair school with Hand Board Drg No: FD-TP

Chair CBB/CBA steel. Drg No: FD-75

Table office clerk steel. Drg No: FD-84

Table office officer steel. Drg No: FD-84

Rack steel 1830x1905x760mm. Drg No: FD-129

Book self open large. Drg No: FD-69(L)

Book self open small. Drg No: FD-69(M)

Almirah large steel 1/2'x1/2'. Drg No: FD-114(M)

Filing cabinet 4 drawer. Drg No: SD-1364

Flying cloth locker. Drg No: SD-1365

Shoe rack steel (Black Paint). Drg No: E6/MAP/IIR

Teapoy varandah (White Paint). Drg No: FD-255

Chair copolymer (Black Paint). Drg No: TP

Almirah map with drawer. Drg No: FD-83

Stool revolving adjustable. Drg No: FD-103(M)

Table 900 x 900 x 760mm Steel Drg No: FD-1009

Table 900 x 600 x 760mm Steel Drg No: FD-1008,1007

Table dining Ors. Drg No: FD-165

Foam with back. Drg No: FD-78

Foam without back. Drg No: FD-77

Locker steel. Drg No: FD-1029

Bench work shop 1500x900x760 mm. Drg No: FD-1024

Bench work shop 1800x900x760 mm. Drg No: FD-1024

Blow plast co-polimer 3-in-1 chair with arms. Drg No: TP

Preparation of old painted surfaces of ladder for loft by scrapping down the entire old paint & applying putty for even surface and applying one coat of synthetic enamel paint of black shade over a coat of red oxide primer on external surfaces etc., complete all as specified and as directed by Engr-in-charge. Drg No: FD-238

Preparing the following wooden furniture by removing old polish & making the surface smooth using sand paper also filling the cavities with wooden filler & applying one or more coats of french polish until high glossy finish is obtained . Rest all as specified & directed by Engr-in-charge

Chair writing. Drg No: FD-250/280

Chair dining. Drg No: FD-228

Chair easy. Drg No: FD-229

Table dressing gents. Drg No: FD-230

Teapoy. Drg No: FD-232

Table dining 8 person. Drg No: FD-239

Table dining 6 person. Drg No: FD-239

Notice board of size 2440x1220mm. Drg No: FD-99(M)

Notice board of size 1830x1220mm. Drg No: FD-99(M)

Notice board of size 900x600mm. Drg No: FD-99(M)

Peg table. Drg No: FD-236

Stool dressing. Drg No: FD-252

Table center. Drg No: FD-235

Table conference /library. Drg No: FD-108

Bench work shop. Drg No: FD-145

Table bed side. Drg No: FD-248

Table 3'x2' with and without drawer. Drg No: FD-223

Sofa set 4 seater. Drg No: FD-258

Table writing. Drg No: FD-249

Table dressing ladies. Drg No: FD-251

Sofa set 5 seater. Drg No: FD-258

Sofa set 6 seater. Drg No: FD-258

Bin soiled linon. Drg No: FD-244

Bed ply wood top. Drg No: FD-246

Hat stand with mirror. Drg No: FD-233

Table Dman/workshop. Drg No: FD-211

Almirah mess utensils. Drg No: FD-93(M)

Table special 1500x1000x1400mm. Drg No: SK-150-1/3

Table special 2300x600x800mm. Drg No: SK-150-2/3

Table dining 1200x900mm. Drg No: FD-273

Table 900x900mm. Drg No: FD-291

TABLE COMPUTER Removing existing unserviceable components from table computer & Supplying following new components as per drawing completely all as specified & directed by Engr -in-charge

Top made out of prelaminated particle board of size 1200x600mm thick exterior grade of required shade & edges shall be covered with PVC lipping all round for smooth finish.

Removing the unserviceable telescopic channel of the drawer & replacing it with new telescopic channel both the side of required size o& of good quality as approved by Engr-in charge for smoot movement of the drawer.

Mahesh Traders (BID ID -3392396)

KASTURILAL HARICHAND OHRI AND SONS (BID ID -3393475)

SHANMUGA TRADERS (BID ID -3387753)