Renovation of Sanitary and Water supply System

Amount

CIVIL WORKS

DISMANTLING WORKS

Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels.

Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. (i) Area of door/window up to 3.00 m2

CEMENT CONCRETE WORKS

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete.

100 mm thick

CEMENT PLASTERING

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

A) On rough side

a) In cement mortar 1:4

A) Onfair side

a) In cement mortar 1:4

FLOORING AND FLOOR FINISH

VITRIFIED TILES

A) ON FLOOR

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)

a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make

ii) Of size 600mmx600mm and above

B) ON WALLS

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile(Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).

i) Of size 300mmx450mm and above

WOOD WORKS

CHOWKATHS

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.

(b) With 1st class timber (Bonsum/ Sundi)

BLOCK BOARD SHUTTERS

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws.

b) Non decorative type and block board core.

(i) 40 mm thick .

P.V.C. DOORS & DOOR FRAMES

Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately)

b) 29mm thick

PAINTING

WALL PUTTY

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

WALL PAINTING

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

(a) Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

PAINTING ON WOOD AND WOOD BASED SURFACES

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting.

(b). With ready mixed paint , wood primer (white).

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

PAINTING ON STEEL AND OTHER METAL SURFACE

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.

a) With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

(i) Surfaces over 100mm in width or girth.

a) General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

SANITARY AND WATER SUPPLY WORKS

EUROPEAN TYPE WATER CLOSET

Providing fitting and fixing Vitreous china wall hang water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)

ii) Hindware make

a) White

(iv) Wall mounted Closet Const (inclusive of seat cover and fittings) (Cat. No. 20040)

PVC FLUSHING CISTERN

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)

ii) Hindware make

a) White

(i) Sleek+ PVC cistern

URINAL

Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.

(B) Hindware Make

(a) White

(iii) FB 610 x 410 x 380 (Cat. No.60002)

SQUATING PLATE URINAL

Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.

(A) Parryware Make

(i) White (Cat. No. C0503)

DIVISION PLATE

Supplying fiting and fixing vitreous china division plate including fitting and fixing compete as directed and specified.

(ii) Hindware Make

(a) White

(i) Division Plate 680 x 300 (Cat. No.61001)

WASH BASIN

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)

PEDESTAL BASIN (with pedestal)

(B) Hindware Make

(a) White

(i) CEDER 570 x 440 (Cat. No.91049/91115)

MIRROR

Providing fitting and fixing Decorative Mirror complete as directed and specified.

(A) Parryware Make

(a) Size 800mm x 600mm

SOAP TRAY,SOAP DISH,LIQUID SOAP DISPENSER

Providing, fitting and fixing Liquid soap dispenser and liquid soap container complete as directed and specified.

(i) Jaquar Make

(b) Continental (Cat.No.ACN-1137N) (with mettalic bottle)

TOWEL RAIL

Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified.

(b) Sona make

(i) Towel ring round (Cat.No.TR-06051)

WASTE COUPLING

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified.

(c) Cera make

(iii) Waste coupling with pop-up for bath tub

PVC PIPES,BENDS,JUNCTIONS,TEES ETC.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

(iv) 75mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

(iv) 75 mm dia.

Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

Supplying fiting and fixing PVC cross ‘T’ plain of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(i) 110mm x110mm

Supplying fiting and fixing PVC coupler of (Supreme / Prince)or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(i) 110 mm dia

(ii) 75 mm dia

Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trences as necessary complete at all levels including below G.L. as directed and specified.

(b) 75 mm dia

Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.

(iv) 75mm dia. PVC cowel of ISI make

GRATING

Providing fiting & fixing C.I. Grating to the floors complete as directed and specified.

(a) 110mm dia

PIPING

Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all plain and cpvc brass threaded fittings i/c fixing the pipe with claimps at 1.00 m spacing. This is includes jointing of pipes

(B) Concealed pipe with cutting chases & making good the walls

b) 20 mm nominal outer dia pipe

BIB COCK

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately)

(ii) Jaquare make

(iii)2-Way bib cock

STOP COCK

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately)

Jaquar

(ii) 15mm dia( Angular stop cock with long thread )

PILLAR COCK

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed.

(II) Jaguar make

(b)Long neck with areator

VALVE

Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.

b) 40 mm dia.

PIPING

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed

C) CPVC pipe with CPVC fittings (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)

ii)20mm (OD) diameter

v) 40 mm (OD) diameter

INTERNAL ELECTRICAL WORKS

Wiring in surface/Recessed PVC Conduit FR

Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete

Medium point up to 6.00 metre. Length.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.

With 3 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying and fixing of 3 plate Ceiling Rose (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) on the existing block including connection as approved by the Deptt.)complete as required

MODULAR ITEMS

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department.

9 module type Metal

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department.

9 module

Supplying with fitting fixing of 6/10 amp one way modular clip in switch with LED , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of blank plate single in modular switch system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE complete as per direction of department.

LUMINARIES

BATTEN LIGHT, TMS 540 1X TL 5 54 W HO with 1x54 W T-5 Fluorescent tube. (Philips make or equivalent)

FITTING AND ACCESSORIES

CEILING FAN, EXHAUST FAN AND AIR CURTAIN

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.

High Speed 225 mm sweep (ORIENT make), Trans Air 225 mm sweep (Crompton make), Ventil Air DX 250 mm sweep Louver type (Havells make)

EXTERNAL WATER SUPPLY AND SANITARY WORKS

Piping

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified. (each 6m in length )

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed

C) CPVC pipe with CPVC fittings (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)

v) 40 mm (OD) diameter

Supplying fitting and fixing check valve (non return valve) including thread to pipes.

iii) 40mm diameter

WATER TANK

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes

1500 litre capacity

(a) Sintex make

Labour for erecting and placing PCVCTank over the stagging of 5.00m up to 8.00m complete as directed.

(b) 1500 litre capacity

INSTALLATION OF DEEP TUBE WELL BY DRILLING RIG USING DTH HAMMER

Preparation of site for placement of the drilling rig including excavation of mud pit, circulation drain, collection chamber etc. all complete as directed

Movement of Rig to the drilling site including cost of P.O.L. all complete as directed.

Transportation of all ancillary equipments, camp materials, welding set, rig accessories ets. Including cost of P.O.L. all complete as directed. (b) Beyond 100.0 m

Transportation of all store materials like pipes, strainer, cone, socket, clamp, bentonite etc. including cost of P.O.L. all complete as directed. (b)Beyond 100.0 m

Transportation of air compressor of kirloskar make 540 CFM, 10.5 kg/ sqcm with all accessories including cost of P.O.L. all complete as directed.(b)Beyond 100.0 m

Transportation of P.O.L. all complete as directed

Providing water supply facilities at drilling site all complete as directed. (b) By installing 1 Nos. 5 HP dewatering pump.

Drilling with bit in over burden portion of soil formation including collection of soil sample at every 3 m depth wherever there is change of strata in sample boxes with distinguishing marks up to the depth of rock formation and with drawing the drill bit for lowering etc as directed.

Drilling with drilling rig using DTH hammer in all kind of rock formation including collection of sample at every 3 mtr depth of boring whereever there is a change of strata in sample boxex with distinguishing marks up to the required dept of boring along with breaking rockfracture for desire discharge with drawing drill rod and finishing the bore hole by ramming up to the required dia minimum 150mm dia up to the bottom and washing the well as per direction of the department.

Casing /lowering of well assembly ERW MS pipe of 150mm dia including supply of 8mm thick MS pipe of 150mm dia (As per IS specification) including fitting, fixing in position with electric arc welding of joint including welding of 50 X 5 mm MS flatof 30 cm length at each joint properly, cutting to required length and lowering the same concentrically using guide etc. in the bore hole as directed by the department.The pipe will be painted in 2 (two) coats with black bituminous paint (Rate approved by SPD, ARIAS Society)

Developing of the D.T.W. with air compressor, Make - Kirlosker/ Cumins all complete as directed

Supplying, fitting, fixing end cap on the top & bottom of the bore well,150mm dia best quality having ISI mark

Supplying fitting fixing PVC male addoptar of 150 mm dia, having ISI mark

8 mm electrical cable

Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed.

A) G.I. pipe

a) TATA / SAIL (Medium)socket should be welded to the pipes.

vi) 50mm diameter

Renewing G.I. bend (heavy quality) as specified & directed.

(e) 50 mm dia.

Renewing G.I. Tee (heavy quality) as specified & directed.

(d) 32 mm dia.

Renewing G.I. Union joint (heavy)

(f) 50 mm dia.

MRINMOY JYOTI THOUSEN

SHRI SUSHANTA KUMAR NAYAK

JITU HANDIQUE