MAINTAINANCE OF ELECTRICITY POLE IN SANGAMNER MINICIPAL AREA

Amount

Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with provided base plate in provided foundation as per specification no. OH-PL/RSJ CSR 23-24 Item no.8-1-13

Supplying and erecting rolled steel joist (girder) pole 125 x 70 mm (13.3 kg/m) with provided base plate in provided foundation as per specification no. OH-PL/RSj CSR 23-24 Item no.8-1-10

Supplying and erecting pre-stressed cement concrete (PSC) rectangular pole of top 90 x 102 / 105 mm & bottom of 90 x 275 mm 8 m long (140 kg) complete erected in provided C. C. foundation & muffing (square / round) as per specification no. OHPL/PSC

Supplying and erecting all aluminium stranded conductors 7/2.21 mm complete. (Gnat) (73.77kg/km) as per specification no. OH-CON/AAC CSR 23-24 Item no.8-4-2

Supplying and erecting ACSR conductor of size 6/1-2.59 mm complete. (Weasel) (127.7 kg/km) as per specification no. OHCON/ACSR CSR 23-24 Item no.8-4-7

Supplying and erecting all aluminium stranded conductors 7/3.10 mm. complete. (Ant.) (145.0 kg/km) as per specification No. OH-CON/AAC CSR 23-24 Item no.8-4-5

Supplying and erecting 75x40x6 mm with 4.4 mm thick web and 7.3 mm thick flange channel (top pin) with clamp of suitable length so as to maintain vertical clearance of 1065 mm for 11 kV,1320 mm for 22 kV between insulators for erection of top pin insulators complete as per specification no. OH-PL/VCA CSR 23-24 Item no.8-3-14

Supplying and erecting bracket for guarding of HT OH Line, made from channel iron 1600 mm in length and 75x40x6 mm. erected on pole complete as per specification no. OH-PL/VCA CSR 23-24 Item no.8-3-15

Supplying and erecting bracket for guarding of HT OH Line, made from channel iron 1600 mm in length and 65 x 65 x 6mm thick erected on pole as per specification no. OH-PL/VCA CSR 23-24 Item no.8-3-16

Supplying and erecting approved make 11 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp CSR 23-24 Item no.10-5-1

Supplying and erecting approved make, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm. CSR 23-24 Item no.10-5-5

Supplying and erecting distribution class, 11 kV thyrite type lightning arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA CSR 23-24 Item no.8-5-15

Supplying & erecting inline D. P. structure for 11/0.415 kV, 63 kVA transformer with R.S.J. Pole 2 Nos. of size 100 x 116 mm x 11 m long with suitable distribution box of C.R.C.A. Sheet 16 SWG with 4 pole MCCB 100 amps as incomer & 6 nos. 63 amps kitkat/MCCB for outgoing circuits. Transformer D.P. Structure includes the A. B. Switch 200 amps, D.O. fuse set & L.A. set, 2 nos. of top channel of size 100 mmx 50 mm for erection of A.B. switch & 2 nos. base channel of size 100 mm x 50 mm for erecting transformer. channel of size 75 x 40 mm for erecting D.O. fuse set, L.A., A.B. switch handle etc. angle of size 50 x 50 x6 mm for erecting distribution box, transformer belt etc.as per drawing (min. 124 Kg. iron work) with necessary clamps, nut-bolts, vee cross arm, top clip, insulators etc. complete with caution board & barbed wire. D.P. structure shall be erected in c.c. foundation complete. CSR 23-24 Item no.8-3-18

Supplying & erecting inline D. P. structure for 11/0.415 kV, 100 kVA transformer with R.S.J. pole 2 nos. of size 100 x 116 mm x 11 Mtr. long with suitable distribution box of C.R.C.A. sheet 16 SWG with 4 pole MCCB 200 amps as incomer & 6 nos. 100 amps kitkat/MCCB for outgoing circuits. Transformer D.P. structure includes the A. B. switch 200 amps, D.O. fuse set & L.A. set, 2 Nos. of top channel of size 100 mm x 50 mm for erection of A.B. switch & 2 nos. base channel of size 100 mm x 50 mm for erecting transformer channel of size 75 x 40 mm for erecting D.O. fuse set, L.A., A.B. switch handle etc. Angle of size 50 x 50 x6 mm for erecting distribution box, transformer belt etc.as per drawing (min. 124 Kg. iron work) with necessary clamps, nut-bolts, vee cross arm, top clip, insulators etc. complete with caution board & barbed wire. D.P. structure shall be erected in c.c. foundation complete. CSR 23-24 Item no.8-3-19

Supplying & erecting inline D. P. structure for 11/0.415 kV, 200 kVA transformer with R.S.J. pole 2 nos. of size 100 x 116 mm x 11 Mtr. long with suitable distribution box of C.R.C.A. sheet 16 SWG with 4 pole MCCB 300 amps as incomer & 6 nos. 100 amps kitkat/MCCB for outgoing circuits. Transformer D.P. structure includes the A. B. switch 200 amps, D.O. fuse set & L.A. set, 2 nos. of top channel of size 100 mmx 50 mm for erection of A.B. switch & 2 nos. base channel of size 100 mm x 50 mm for erecting Transformer. channel of size 75 x 40 mm for erecting D.O. fuse set, L.A., A.B. switch handle etc. Angle of size 50 x 50 x6 mm for erecting distribution box, transformer belt etc.as per drawing (min. 124 Kg. iron work) with necessary clamps, nut-bolts, vee cross arm, top clip, insulators etc. complete with caution board & barbed wire. D.P. structure shall be erected in c.c. foundation complete. CSR 23-24 Item no.8-3-20

Supplying and erecting vee cross arm with ISM channel of 75x40x6mm, for 11kV HTOH line with arrangement to fix insulator at 45mm from the end & horizontal distance between insulators 1220 mm bent at angle of 60 degree keeping base 305 mm and the total vertical height of V cross arm as 460mm, and fixed on pole with MS clamp of 80x10 mm, nut bolts,washers complete as per specification no. OH-PL/VCA CSR 23-24 Item no.8-3-12

Supplying and erecting porcelain shackle type LT medium insulator 50 x 89 mm dia. with G.I. (Shackle) strips, nuts and bolts, complete. CSR 20-21 Item no. CSR 23-24 Item no.8-5-3

Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.I. stay wire 7/10 SWG, G.l. stay rod 20 mm x 1.8 m length and pole clamps duly erected in provided cement concrete foundation. CSR 23-24 Item no.8-6-1

SSupplying and erecting polymer disc type insulator 45KN with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI CSR 23-24 Item no. 8-5-20

Supplying and erecting porcelain pin type insulator with G.I. pin suitable for 11kV line, complete as per specification no. OHINS/PN CSR 23-24 Item no.8-5-9

Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.I. stay wire 7/8 SWG, G.l. stay rod 20 mm x 1.8 m length and pole clamps duly erected in provided cement concrete foundation. CSR 23-24 Item no.8-6-2

Supplying & erecting single pole cut point channel set of for 11 kV HT OH line, two channel of size 100 x 50 x 6 mm 1.6 m long having stud angle of size 50 x 50 x 6 mm 1.5 m long long with necessary clamps, nut bolts etc. complete. CSR 23-24 Item no.8-3-17

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EAEP CSR 23-24 Item no.9-1-4

Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75 m) length respectively and total 8 m long with pole cap, base plate in provided foundation.(weight 101 kg.) as per specification no. OH-PL/STP CSR 23-24 Item no.8-1-1

Supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2 m ) length respectively and total 9 m long with pole cap, base plate in provided foundation (weight 147 kg) as per specification no. OH-PL/STP CSR 23-24 Item no. 8-1-3

Supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm dia with 4.5 x 4.5 x 3.65 mm. thickness (5 + 2.5 + 2.5 m) length respectively and total 10 m long with pole cap, base plate in provided foundation (weight 160 kg) as per specification no. OH-PL/STP CSR 23-24 Item no.8-1-5

Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45 x 45 x 45) cm /45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (above 6 m to 9 m poles) CSR 23-24 Item no.16-3-3

Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles) CSR 23-24 Item no.16-3-4

Supplying, erecting & terminating XLPE armoured cable 2 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 23-24 Item no.7-1-4

Supplying, erecting & terminating XLPE armoured cable 2 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 23-24 Item no.7-1-5

Supplying, erecting & terminating XLPE armoured cable 2 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 23-24 Item no.7-1-6

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 23-24 Item no.7-1-27

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 23-24 Item no.7-1-28

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 23-24 Item no.7-1-29

Supplying, erecting & terminating XLPE armoured cable 4 core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL CSR 23-24 Item no.7-1-31

Supplying, erecting & terminating XLPE armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 23-24 Item no.7-1-19

Supplying, erecting & terminating XLPE armoured cable 3½ core 120 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 23-24 Item no.7-1-20

Supplying, erecting & terminating XLPE armoured cable 3½ core 150 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 23-24 Item no.7-1-21

Supplying, erecting & terminating XLPE armoured cable 1100 V. 3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 23-24 Item no.7-1-22

Supplying and erecting Street light bracket for erection of side entry fitting on pole with 25 mm. dia. ‘B’ grade G.I. pipe of required length complete as per specification no. FG-BKT/SLB CSR 23-24 Item no.2-6-9

Supplying and erecting Street light bracket made from 25 mm. dia ‘B’ class G.I. Pipe, 0.6 m in length along with pole cap of 300 mm length and 80 mm dia.duly welded with provided leads as per specification no. FG-BKT/BPC. CSR 23-24 Item no.2-6-1

Supplying and erecting street light Wall bracket made from 25 mm. dia ‘B’class G.I. pipe 1.2 m in total length complete as per specification no. FGBKT/WB.CSR 23-24 Item no.2-6-3

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete CSR 23-24 item no.7-6-9

Supplying & erecting G.I. pipe ‘A’ class 50 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE CSR 23-24 Item no.7-6-3

Supplying & erecting FRP box of size 250 x 200 x 100 mm, 2.7 mm thick complete on pole/wall as per specification no. CB-SB CSR 23-24 Item no.7-8-9

Supplying, erecting & marking SP MCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB CSR 23-24 Item no.5-3-3

Supplying and erecting mains with ISI mark WP 2 x 4 sq. mm. 1100 V grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. CSR 23-24 Item no.1-4-2

Supplying and erecting mains with ISI mark WP 2 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. CSR 23-24 Item no.1-4-3

Supplying & erecting FRP box of size 150 x 125 x 100 mm, 2.7 mm thick complete on pole/wall as per specification no. CB-SBCSR 23-24 litem no.7-8-8

Supplying & erecting crimping type aluminium lugs for cable up to 16 sq. mm. complete as per specification no. CB-CL/A CSR 23-24 litem no.7-10-1

Supplying and erecting ISI mark G.I. pipe pole ‘B’ grade 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. OH-PL/GIP csr 23-24 item no.8-1-16

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT csr 23-24 item no.8-2-19

Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT csr 23-24 item no. 8-2-20

Supplying & erecting MS pole bracket for guarding/LT OH Line, fabricated from angle iron 50x50x6 mm and 550 mm long for necessary nos. of provided insulators and erecting on pole with 50x6mm clamp complete as per specification no. OH -PL/BKT csr 23-24 item no.8-3-1

Supplying & erecting MS pole bracket for guarding/LT OH Line, fabricated from angle iron 50x50x6 mm and 1100mm long for necessary nos. of provided insulators and erecting on pole with 50x6mm clamp complete as per specification no. OH -PL/BKT csr 23-24 item no.8-3-2

Supplying and erecting 'C' type (half) clamps for pole made from 50 x 6 mm flat for fixing cross arms by means of 15 mm dia. bolts and nuts painted with one coat of red oxide and two coats of aluminium paint. csr 23-24 item no. 8-6-11

Supplying and erecting ‘D’ type pole clamps, fabricated from 50 x 6 mm MS flat with 15 mm dia. bolts and nut fixed to steel tubular pole duly painted with one coat of red oxide and two coats of aluminium paint.csr 23-24 , item no.8-6-10

Supplying and erecting aluminium strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP. csr 23-24 item no. 9-2-1

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP.csr 23-24 item no.9-2-2

Supplying and erecting Annealed bare copper wire of high purity of different sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws in an approved manner. Csr 23-24 item no.9-2-4

Supplying and erecting GI earth conductor of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner. Csr23-24 item no.9-2-5

Making cement concrete foundation including excavation ( 45 x 45 x 120 ) cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal, (45 x 45 x 45) cm / 45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (for 6 m pole) csr 23-24 item no.16-3-2

Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete, (20 to 25) mm stone metal with necessary curing and finishing complete.(for stay).csr 23-24 item no.16-3-6

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). Csr 23-24 item no.16-3-7

Painting of pipe pole upto 6 m length along with streetlight / pole brackets / clamps etc by scrapping the existing paint complete. Specification no CW -PTG/PTP. CSR 23-24 Item no.16-4-2

Painting of steel tubular / rail / RSJ pole above 6.0 m length along with street light pole brackets, clamps etc by scrapping the existing paint complete. Specification no CW -PTG/PTP.csr 23-24 item no.16-4-3

Supplying and erecting 9m (clear height) fixed type High Mast (Top-100mm, Bottom- 200mm) with hexagonal/round bracket and foundation bolts suitable for max. 4 nos floodlight fixtures on provided foundation as per specification no. OH-PL/OPL (excluding luminaries).csr 23-24 item no.8-2-8

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP csr 23-24 item no. 9-1-2

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 9m & 10m high octagonal /conical GI pole).csr 23-24 item no.16-3-10

Supplying and erecting guarding loop using G.l. wire no.8 SWG for L.T. overhead line of horizontal formation complete erected with 20 SWG GI wire as binding wire and 50 mm. section on each side, complete. csr 23-24 item no.8-6-6

Dismantling the existing overhead line including G.I. wires of all sizes without damaging & making the coils in suitable sizes. Csr 23-24 item no.8-7-3

Dismantling existing pole mounted distribution transformer safely without any damages. CSR 23-24 Item no.10-6-2

Supplying and erecting fibre/ PVC spacers for LT overhead line 3 to 5 conductors complete erected. csr 23-24 item no.8-6-7

Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level. CSR 23-24 Item no.8-7-2

Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV csr23-24 item no.1.3.14

Supplying, erecting & terminating XLPE insulated 1100 V 3 Core 16 sqmm + 1 Core 25 Sqmm Aerial bunched aluminium cable along with necessary accessories for LT distribution on provided LT pole as per specification no. OHCBL/ABC CSR 23-24 item no.8-4-12

Supplying, erecting & terminating XLPE insulated 1100 V 3 Core 70 sqmm + 1 Core 50 Aerial bunched aluminium cable along with necessary accessories for LT distribution on provided LT pole as per specification no. OH-CBL/ABC CSR 23-24 item no.8-4-16

supplying wireman/Electrician (ITI qualified person)

supplying wireman/Electrician (ITI qualified person)

Detecting and clearing of fault (L-L fault, L-G fault etc.)

Supplying and erecting Street light bracket for erection of Double fittingmade from 40 mm. dia ‘B’ class G.I. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FG-BKT/SLB CSR 23-24 item no.2-6-6

Supplying and erecting integrated LED street light fitting 18 - 22W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 1800 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG CSR 23-24 item no.2-3-1

Supplying and erecting integrated LED street light fitting 26 to 30W IP65 & IK08 class having single piece pressure die-cast aluminium housing , having system lumens output of Min. 2600 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG CSR 23-24 item no.2-3-3

Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG ODF/SL CSR 23-24 item no.2-3-4.

Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG-ODF/SL. CSR23-24 item no.2-3-5

Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG-ODF/SL.CSR23-24 item no.2-3-6

Supplying and erecting integrated LED street light fitting 85-90W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 9300 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG-ODF/SL.CSR23-24 item no.2-3-7

Supplying and erecting integrated LED street light fitting 100-110W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 11000 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG ODF/SL. CSR23-24 item no.2-3-8

Supplying and erecting integrated LED street light fitting 120W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 13000 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minium 2 Years warranty as per specification No. FG-ODF/SL. CSR 23-24 item no.2-3-9.

Supplying and erecting integrated LED flood light fitting Max. 155W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 18600 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FG CSR 23-24 item no.2-3-17

Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FG CSR 23-24 item no.2-3-18

Erecting the departmentally supplied pole

stringing of 1 span of conductors distance upto 60 meters

Erecting the departmentally supplied WP LED street light / flood light fitting upto 80W. CSR 23-24 item no.2-3-24

Erecting the departmentally supplied LED street light / flood light fitting above 80 to 150W.CSR 23-24 item no.2-3-25

Point wiring for light/bell/exhaust fan in minimum 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SW CSR 23-24 item no.1-7-11

Point wiring for ceiling fan in minimum 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SW CSR 23-24 item no.1-7-12

Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SW CSR 23-24 item no.1-7-18

Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SW CSR 23-24 item no.1-7-19

Supplying and erecting single phase smart energy meter DLMS compliance with 240V 50 cycles AC supply 5-30 A, accuracy class 1.0 with backlit LCD display, measuring & display kWh, V, I, kW, day, week, month & with communication module configurable for GSM/Wi-Fi, IrDA/Bluetooth, complete provided panel with calibration certificate from manufacturer & duly wired with required size of PVC wires.CSR 23-24 item no.6-5-16

Supplying and erecting three phase smart energy meter DLMS compliance with 3x240V 50 cycles AC supply 10-60 A, accuracy class 1.0 with backlit LCD display, measuring & display V, I, kW, kWh, PF, kVA, kVAr, MD, day, week, month & with communication module configurable for GSM/Wi-Fi, IrDA/Bluetooth, complete provided panel with calibration certificate from manufacturer & duly wired with required size of PVC wires.CSR 23-24 item no.6-5-17

Supplying & laying (including excavation) half round reinforced cement concrete pipe of NP-2 class of 150 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.CSR23-24 kitem no.7-6-6

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete. CSR23-24 item no.7-6-11

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete CSR23-24 item no.7-6-12

Supplying and fixing MS base plate 30x30x0.6cm size fixed to the pole base either by welding 12mm dia fixed at position.CSR23-24 item no.8-6-13

Supplying and erecting pole clamp made from 50x10mm MS flat for pole or pipe, post erected with 15mm bolts and nuts duly painted with one coat of red oxide and two coats of aluminium paint complete. CSR 23-24 item no.8-6-9

Supply, installing, and testing of maintenance free earthing comprising of electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity (min. 125kg) complete, and recording the results specification no. EA-MF CSR 23-24 item no.9-1-5

Making M-20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal/conical GI pole).CSR23-24 item no.16-3-9

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL CSR 23-24 item no.8-2-12

Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL CSR 23-24 item no.8-2-13

Providing & erecting 8 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL CSR 23-24 item no.8-2-14

Supplying and erecting integrated LED Bollard Cylindrical / Cubical shaped 500mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with minimum 2 Year warranty as per specification No FG-ODF/BL. CSR 23-24 item no.2-3-19

GIRIRAJ TRADERS

M/s Jay Munjoba Light House