e-T.No-05

Amount

Rectification of DC Earth Fault leakage at 220 K.V. Sub- Station, Amethi under ETD-Sultanpur, with all due care of safety & precautions, with all cost of men, misc. consumables, T&Ps etc. required for satisfactory completion of work as per technical specification & direction of the supervising engineer as detailed under :-

Identifying/tracing and removing of 110V DC leakage in control /Protection cables of 220kV Feeder, 132kV Feeder, 33kV Feeders,C&R Panels, DCDB, Battery charger, marshelling box of Transformer alongwith cleaning and tightening of terminal blocks of feeders at 220kV S/S Amethi work including all cost of men and T&P.

Separation of DC circuit of faulty control or protection cables of 220,132 & 33kV bays work including laying of new 2Cx2.5 or 4Cx2.5 (as per site requirement ) sqmm cable in cable trench from control and protection panel to its associated connected equipment and termination properly by using suitable size of cable gland , lug, ferrule including cost of labour and material but control cable will be provided by the the department .

Dismantling and stacking of old & damaged control cables of 2 core size lying in the cable trenches. Job consists of removing of cable trench covers, identifying of damaged control cable and removing of them from trench to outside and then shifting all dismantled cable from site to store with all cost of men and T&P.

Dismantling /removing of damaged control cables of (2 & 4core size) lying in the cable trenches. Job consists of removing of cable trench covers, identifying of damaged control cable and removing of them from trench to outside. Determination of connection at both end and then shifting all dismantled cable from site to store with all cost of men and T&P.

Laying of following size of Unarmoured control cable trench from the control relay panel to the various equipment junction boxes etc in the switchard as per cable schedule its saddle at the every 75mm distance with MS saddle of size 25x3 mm including carriage of cable drums from store to the laying site end shifting back of remaining materials back to store and other associated work to complete the job satisfactorily.

Termination of following size control cables on C&R Panel as per cable schedule including making necessary holes in gland plate of junction boxes, supply and fixing of cables glands ferrule of appropriate size and nos. respectively for each core of cable and its termination with crimping type lugs, ferrules & other minor accessories to complete job satisfactorily.

BHARAT TRADERS (BID ID -5238402)

URJA ELECTRONICS (BID ID -5239766)