Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 LAccepted-AOC | L1 | Accepted-AOC VALID | |
| 2 | L2₹13.8 L+₹83,000 (6.40%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹14.3 L+₹1.3 L (10.3%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹14.9 L+₹1.9 L (14.6%)Rejected-Finance WARD NO 26 OLD 36 NEW NEAR FIRE BRIGADE OFFICE RCP TAL COLONY ROAD SURATGARH 335804 SRI GANGANAGAR RAJ | SURATGARH | SRI GANGANAGAR | RAJASTHAN | 335804 | L4 | Rejected-Finance NOT BEING LOWEST |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
13 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Priyesh Srivastava
GE (AF) SURATGARH
REPAIR MAINT WORK OF ORP BLAST PENS AND CONNECTED MISC BR WORK AT AF STATION SURATGARH
2022_MES_538275_2
8968/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) SURATGARH
AS PER TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
GE (AF) SURATGARH
₹30,000
Yes
26 Oct 2022
23 Aug 2022
15 Sept 2022
23 Aug 2022
13 Sept 2022
30 Aug 2022
Amount
BOQ (REPAIR/MAINT WORK OF ORP, BLAST PENS AND CONNECTED MISC B/R WORK AT AF STATION SURATGARH)
Procurement of empty new PVC sand bags and filling the bags with and including tibba sand / approved earth (as approved by GE) from sources outside defence land for forming embankments / area filling including raising. Filling the bags with tibba sand / approved earth minimum 22 Kg in each bags, sealed the sand bags with 6mm nylon rope and stacking the bags up to 8.00 metre height by head load in such manner and arrangement as directed including taking down old cement bags, small bushes if any, and making the surface of required shape for sand bag complete all as specified and directed by the Engineer in Charge. Note: (i) Colour of Bag shall be approved by GE. (ii) Tibba sand / Earth required for the item, shall be supplied by contractor from out side MOD land of any lead at his own arrangement. (iii) All cost of procurement of earth/tibba sand including cost of transportation, compaction, royalties, tax etc shall be deemed to be included in the unit rate quoted by the contractor.
M&L over embankments area of traverse wall earth filling around holes including raising and filling with tibba sand or approved earth up to 8.00 metre height by head load in such manner and arrangement as directed including taking down damage portion and clean small bushes if any, and making the surface of required uniform shape complete all as specified and directed by the Engineer in Charge. Note: (i) Tibba sand / Earth required for the item, shall be supplied by contractor from out side MOD land of any lead at his own arrangement. (iii) All cost of procurement of earth/tibba including cost of transportation, compaction, royalties, tax etc shall be deemed to be included in the unit rate quoted by the contractor.
Dismantling old MS/Steel rolling shutter/MS Shutter of any size any position complete all as specified and directed by Engg-in-Chrage.
S & F 1 mm thick lath steel rolling shutters,with out ball bearing,as specified including top cover,an-choring rod,hasp and staple and one shop coat of primer erected in position as indicated but gear operated type with bevel gear box including shaft and crank handle including taking down old rolling shutter complete all as specified and directed by Engineer-in Charge. Note :- Rolling Shutter Includes all parts as per IS code 6248-1979 1) Crank Handle 2) Pluge Boalts 3) Crank stand 4) Guide Rail 5) Crank driving Wheel 6) Upper Box 7) Lower Box 8) Crank Fitting 9) Slats 10) Slats Cap 11) Bottom Slats 12) Sealing Belts 13) Limit Knob 14) All Bearing of any size complete.(Measurment of Rolling in width including side guide rails and in height from Bottom slats(bottom plate) upto bottom of hood cover/below the slats shaft tube)
S & F 1 mm thick lath Steel rolling shutters without ball bearing, including top cover, anchoring rod, hasp & staple and one shop coat of primer; erected in position as indicated, push pull or manual type including taking down old rolling shutter, complete all as specified and directed by Engineer-in Charge. Note :- Rolling Shutter Includes all parts as per IS code 6248-1979 1) Crank Handle 2) Pluge Boalts 3) Crank stand 4) Guide Rail 5) Crank driving Wheel 6) Upper Box 7) Lower Box 8) Crank Fitting 9) Slats 10) Slats Cap 11) Bottom Slats 12) Sealing Belts 13) Limit Knob 14) All Bearing of any size complete.(Measurment of Rolling in width including side guide rails and in height from Bottom slats(bottom plate) upto bottom of hood cover/below the slats shaft tube)
S& F Safety levers locks Mild Steel with 4 levers for Rolling Shutters fixing complete all as specified and directed by Engr-in-Chrage.
Periodical inspection checking various parts, greasing/oiling as required to make the sliding for Rolling shutter hand operated/gear operated/electrically operated any size and any type. Note :- The contractor shall have to attend any complaint with regard to steel door/gate, collapsible gate/rolling shutters any type during working hours for the whole contract period to meet any emergency repairs and this elements should be included in the quoted rates. A recovery @ Rs 500 per day shall be levied upon the contractor if the complaint is not attended within 48 hours.
Taking down of existing manually operated hanger sliding door size 3.7m x 8.40m and easing, adjusting, greasing of base wheels & top glide wheels, straightening, filling, smoothening, cutting, brazing carrying out, welding to bottom & top rail/wheels/channel/door frame, fixing MS roller etc, by mechanical means including minor repair/ welding etc. to sliding door leaf of hanger for noiseless smooth operation including replacement of damage parts and refixing the same at same place, complete all as specified and directed by Engineer-in-Charge. Note :- 1. The work shall be executed through any approved workshop with prior approval of GE, by mechnical means i.e. crane, Tool & Plant etc. 2. All necessary safety measures shall be taken during execution of work. 3. All necessary repairs/minor items such as nut, bolt, washer, T&P, cranes etc shall be provided to ensure smooth closing/opening of the doors without any extra cost to the Govt. 4.Replaced part, wheel etc. shall be measured and paid separately.
Supply only 80mm x 80mm dia Mild Steel Solid Roller for Top hung of Shutter as per the existing shape/ design as per sample, complete all as specified and directed by Engineer-in-Charge.
Supply only Mild Steel Roller size 150 mm dia for bottom channel of Shutter with ball bearing for end side of shutter as per the existing shape / design as per sample, complete all as specified and directed by Engineer-in-Charge.
All as per item No 10.00 here-in-before but 140mm dia (for middle size of shutter) as per the existing shape/ design as per sample ,complete all as specified and directed by Engineer-in-Charge.
S&F for curtain shall be built up of interlocking lath section formed from cold-rolled steel strips. The thickness of the sheets from which the lath sections have been rolled shall be not less than 0.900 mm for shutters although lath sections width 50 mm and 25 mm rolling centres may be used each alternate lath section shall be fitted with malleable cast iron or mild steel clips securely riveted at either end, thus locking the lath ‘section at both ends and preventing lateral movement of the individual lath sections. The clips shall be so designed as to fit the contour of the lath sections complete all as specified and directed.
S&F for springs size 24'X5' used in the roller for counterbalancing the rolling shutter shall be made either from high tensile spring steel wire or flat spring steel strip. complete all as specified and directed.
S&F for springs size 18'X5' used in the roller for counterbalancing the rolling shutter shall be made either from high tensile spring steel wire or flat spring steel strip. complete all as specified and directed.
S&F for springs size 16'X5' used in the roller for counterbalancing the rolling shutter shall be made either from high tensile spring steel wire or flat spring steel strip. complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed trusses complete all as specifed and directed by Engr-in-Charge.
S&F plain MS plates 8mm thick including necceassry fixing, welding and bevelling & drilling of edges as required cutting as per the existing shape / design as per sample, complete all as specified and directed by Engineer-in-Charge.
S&F mild steel framed work as in MS door, grills MS bands, stops, supports, hold fasts, wall ties, hook and similar articles including welding conforming to Fe-290 Gde E-165, embedded portion duly painted with bituminous paint and sanded, (25 mm MS Bar or less for locking arrangument of hanger shutter), complete all as specified and directed by Engineer-in-Charge.
S&F rolled mild steel sections conforming to Fe 290 (GdeE165 ) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specifed and directed.
Dismantling plain or corrugated steel sheeting, any thickness including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws , complete all as specified and directed by Engineer-in-Charge. Notes:- (i) Work shall be executed upto height of 18 metre from Ground Level. (ii) Colour of sheets shall be approved by GE.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.
Demolition of Brickwork or stone/boulders masonry built in cement mortar complete all as specified and as directed by the Engr-in-charge.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1 : 6 complete all as specified and as directed by Engr-in-Charge.
All as per above item here-in-before but except brick complete all as specified and directed. Note:- Bricks retrived from item No 26 shall be reused after proper cleaning.
M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra complete all as specified and directed.
M&L for applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns , including preparation over new plastered surfaces complete all as specified and directed.
M&L for applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns , including preparation of old surfaces like brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots complete all as specified and directed.
M&L for painting of treated surfaces to receive two coat of dry distemper on surfaces of walls and ceiling complete all as specified and directed.
M&L for painting new steel surfaces exc 10cm width or girth with two coats of synthetic enamel paint of approved tint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.
M&L for painting old steel surfaces exc. 10cm width or girth with two coats of synthetic enamel paint of approved tint including preparation of old surfaces, complete all as specified and directed.
Replacement of old or decayed boarding in patches including cutting out old, Piecing,Heading joints etc in ceiling and M&L for Second class hard wood clean sawn boarding 40mm thick, planed one side and edge tongued and grooved with butt joints in any situation except flooring & skirting and fixed with screws complete all as specified and directed. Note- Wooden Platforms shall be replace on Antenna Mast at height upto 30m. Quoted rate included for saftiy belt and all other necessary T&P.
M&L for preparing New surfaces of wood and wood based materials of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of Pink Primer complete all as specified and directed. Note- Painting work shall be done on antenna Mast at height upto 30m. Quoted rate shall be included for safty belt and all other necessary T&P.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for glazed coloured ceramic tiles in vertical surface 300mm x 450 mm x 7mm thick set and jointed in neat cement slurry laid over 10mm thick rendering in CM 1:4 and pointed in white or coloured cement to match complete all as specified and directed.
M & L for glazed ceramic coloured tiles of size 200X 300 X 7mm thick in vertical surfaces set and jointed in neat cement slurry laid over 10mm thick rendering in CM 1:4 and pointed in white cement to match the shade over complete all as specified
M & L for ceramic non-skid tiles area of tiles exceeding 0.06 sqm but not exceeding 0.11 sqm and 7-8 mm thick laid in floors, set and jointed in neat cement slurry laid over 15mm thick screed bed of CM 1:6 and pointed in white or coloured cement to match the shade over complete all as specified and as directed.
M & L for ceramic non-skid tiles area of tiles exceeding 0.11 sqm but not exceeding 0.18 sqm and 7-8 mm thick laid in floors, set and jointed in neat cement slurry laid over 15mm thick screed bed of CM 1:6 and pointed in white or coloured cement to match the shade over complete all as specified and as directed.
S&F vitrified Ceramic tiles Light shade 10mm thick( square/rectangle) Polished area of each tile not exceeding 0.36sqm in floor etc set and jointed in neat cement slurry and laid over 15mm thick screed bed or bedding layer of mortar CM 1:6 and pointed in white or coloured cement to match the surface complete all as specified and directed..
M&L machine cut kota stone slab flooring 20-25mm thick laid over cement screed base of 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including demolition of stone slab and tiles of any description or thickness complete all as specified and as directed.
M&L kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over rendering of 10mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including demolition of stone slab and tiles of any description or thickness complete all as specified and as directed.
M&L granite tile 20mm thick machine cut, bedded and jointed with grey cement slurry and laid over 20mm thick screed bed of CM 1:6 pointed with white/coloured cement with admixture of pigment to match the shade of granite stone including cutting polishing etc, complete all as specifed and directed..
M&L granite tile 20mm thick machine cut, on dado/skirting and jointed with grey cement slurry and laid over 10mm thick rendering in CM 1:4 pointed with white/coloured cement with admixture of pigment to match the shade of granite stone including cutting polishing etc complete all as specified and as directed by the Engr-in-charge.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in platforms/stair case/ Countertop laid over 20mm thick screed bed of CM 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off/curving the edges of granite stone & polishing complete all as specified and as directed by the Engr-in-charge.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of neck of bolt exc. 12 mm but not exceeding 20 mm and length of bolts exc. 5 cm but not exc. 15 cm, in repair complete all as specified and directed by Engineer-in-Charge.
Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 tender documents.
GURUJI ENTERPRISES
Bhawani Enterprises
M/s Shubham Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .