COMPREHENSIVE MAINT AS JOINERY REPAIRS DOORS, WINDOWS AND VENTILATION AND KITCHEN CABINATES AND CERTAIN REPAIR TO OTM ACCN UNDER AGE B/R-II OF GE (EAST) JALANDHAR CANTT

Amount

Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and as directed.

M&L for 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls by applying two coats of oil bound distemper over a coat of primer over one coat of birla white putty complete all as specified.

M&L for 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and as directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).

M&L for preparation of new surfaces of walls including cornices, plasters etc (Plastered or unplastered surfaces) and applying two coats of cement base paint complete all as specified and as directed

Supply only integral water proofing compound all as specified and as directed.

M&L for plastering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified and as directed

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

M&L for preparation of old surfaces of walls including cornices, plasters etc (Plastered or unplastered surfaces) and applying one coats of cement base paint complete all as specified and as directed

M&L for preparation of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and as directed

M&L for one coat of white wash old plastered surfaces of ceiling including preparation of surface complete all as specified and as directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified and as directed .

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty wooden beads in square mtr n.exc 0.50 sqm each pane complete all as specified and as directed .

M&L for 3 mm thick plain figure glass, pin headed type and fixing and glazing with in oil putty in square n exc .5 sqm in each pane complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposal of rubbish outside MD land complete all as specified

M&L for 25 mm thick cement concrete type B-1, 1:2:4 (12.5 mm graded aggregate) to receive the top layer of tiles complete all as specified and as directed .

M&L for non-skid ceramic coloured tiles (premium quality) 7 to 8mm thick(Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors set and jointed in neat cement slurry and pointed in while or colored cement to match over and incl 15mm thick bedding layer CM 1:6 in roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust inc brushing neat cement slurry with 3 kg/sqm complete all as specified.

M&L for non-skid ceramic coloured tiles (premium quality) 7 to 8mm thick(Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in while or colored cement to match over and incl 15mm thick bedding layer CM 1:6 in roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust inc brushing neat cement slurry with 3 kg/sqm complete all as specified.

All as per Srl item No. 18.00 above but in skirting and 10mm thick rendering as backing coat of CM 1:4 complete all as specified and as directed

M&L for coloured glazed ceramic tiles (premium quality) of size 300x450x6 - 7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed .

M&L for vitrified ceramic tiles light shade, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour tiles over and incl 15mm thick screed bed in CM 1:6 complete all as specified and as directed

Ditto all as per Srl item No. 21.00 above but in skirting and 10mm thick rendering as backing coat of CM 1:4 complete all as specified and as directed

S&F 18 to 20mm thick granite (of any type) tiles machine cut , in skirting/dado laid over cement screed 15 mm thick in CM 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and dismantling of existing granite complete all as specified and as directed.

M&L for 18-20 mm thick machine cut granite (of any type ) tiles stone jointed with neat cement slurry mixed with pigment to match the colour of stone incl cutting and polishing and making hole in stone and RCC shelves suitable for gas pipe, with round edges where required and incl 15mm screed bed with CM1:6 all as specified and as directed by Engr-in-Charge

Demolition of reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (reinforcement to cut as required to facilitate demolition) complete all as specified and as directed

M&L for nominal mix reinforced cement concrete 1:2:4, type B-1, (20 mm graded aggregate) slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed

M&L for MS TMT bars 10 mm and over dia and cut to length, bent to shape required incl cranking bending spirally for hooping for clos hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia. complete all as specified and as directed

M&L for form work to soffits of suspended slabs such roof slabs, floor slabs, shelves, landings and similar work, not exceeding 200mm thick (horizontal or slopping) rough finished surfaces of concrete flat or shelfs etc. complete all as specified and as directed

Formwork to edges of concrete flats, breaks in floors, window cills, concrete railings, floor and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding10cm but not exc 20 cm wide rough finished surfaces of concrete all as specified

Dismantling asbestos cement, plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed .

S&F 0.63mm thick galvanised , corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275 complete all as specified and as directed .

M&L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ-70 as in roof covering/cladding to wall, fixed with self-tapping screws as specified complete all as specified and as directed

M&L for Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa AZ-70 as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and as directed

M&L for 4mm thick asbestos cement fiber corrugated or semi-corrugated sheets in roofs fixed with L type or J type hooks complete all as specified

Ditto all as per Srl item No. 34.00 above but except sheets complete

M&L for asbestos cement two piece adjustable ridge for corrugated or semi corrugated sheets 4mm thick fixed with L or J type hooks complete all as specified and as directed

S&F galvanised, 0.80 mm thickness plain mild steel sheeting in ridges, hips, valley gutters, drip and straights flashings fixed with `L' or `J' type or cranked hook bolts, in roofs, walls etc of class -3 all as specified and as directed.

M&L for 18 to 20 mm thick machine in cut kota stone slab flooring over and incl 15mm thick bedding layer CM 1:6 in roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust inc brushing neat cement slurry with 3 kg/sqm with pigments to match the shade of slab including cutting, rubbing and mirror/granite finish polishing including taking down old stone slab complete all as specified and as directed by Engr-in-Charge.

Ditto all as per Srl item No. 38.00 above but on vertical surfaces such as skirting dado, riser etc over and incl 10 mm thick cement plaster in CM 1:4 rough finished surface to receive tiles

Taking down chowkhats or frame with shutter (w/o taking off shutter from the frame) area not exc 1.5 Sqm each all as specified.

Ditto all as per Srl item No. 40.00 above but area exc 1.5 Sqm and not exc 4 Sqm each

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed .

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, hold fast rails, braces, etc, using steel conforming to Fe-410 Gde-E-250 complete, drilled for fixing of steel sheeting or other covering. doors, door frame chowkhats etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening including dismantling of existing frame and necessary cutting drilling and welding and fixing complete all as specified and as directed .

Cutting holes in brick wall built in cement mortar or cement limit mortar for inserting holdfasts and making good dismantling portions in cm 1:3 or cement concrete 1:2:4 type B1 as required for wall exc half brick but not exc one brick complete all as specified.

S&F 35mm thick 2nd class hard wood plain framed factory made panelled shutters with (2 panel ) of 9mm BWP commercial ply of 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I) kiln seasoned and chemically treated complete all as specified

S&F glazed and Skelton shutters factory made 35mm thick open rebated and prepared to receive glass, gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a).complete all as specified and as directed

S&F steel windows/ventilators 1.25 mm thick Box type (primer coated) ERW hollow 'P' section of size 60 mm x 25 mm single rebated double window (comprises of glazed shutter and gauged shutter) EWR sec 50 mm x 20 mm and 1 mm thick and four openable leaf consisting four Nos sash bar of 'T' section 20 mm x 3 mm complete welded to frame with two vertical mullion of EWR bot 'T' section of size 60 mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1, four Nos for each window including following fittings welded to failed shutter:- (a) Holdfasts 150 mm long 12mm x 3 mm made to shape- 4 Nos per window (b) Handle of Z sec 20 mm x 25 mm, 100 mm long - 1 No per leaf. (c) MS tower bolt 150 mm long - 2 Nos per leaf. (d) 'Z' sec 20 mm x 25 mm , 100 long stopper-01 No per leaf, (e) Cleat 55mm long of hollow square 15 mm x 20 mm x 63 mm welded to hinges - 1 No per leaf (f) MS pintal hinges of size 75 mm x 12 mm - 2 Nos per leaf. (g) Fabrication and fixing arrangement complete. Note:- Guard bar/ glass pane and wire gauge shall be measured and paid separately

Ditto all as per Srl Item No. 47.00 above but in gauged shutters without sash bars all as specified and as directed

S&F mild steel framed work such as guard bars/grills, grating etc with end of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, railings etc and similar works including one shop coat of zinc chromate primer complete all as specified.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing

S&F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S&F in repair floor spring door closer for aluminium door in any size brass and chromium plated body approved quality including carefully taking down the existing door and removing the damaged floor door closer and accessories etc and refixing the same door on the new door closer and making good the floor area and match the surface complete work all as specified and as directed by Engr-in-Charge

Repair to existing aluminium door/ window in any size including carefully taking down the existing door/ window and removing the damaged aluminium fittings and accessories etc and refixing the same door/ window with new fittings on same opening and making good the floor/ wall area and match the surface complete work all as specified and as directed by Engr-in-Charge

M&L for powder coated aluminium door shutter having 150mm x 44mm x 2.85mm thick bottom rail, 150 mm x 44mm x 3mm thick middle rail, 100mm x44mm x2.85 mm thick stile and top rail including necessary fitting joinery cleat, glazing packing snap beading 10 mm x 10 mm , Powder coated aluminium handle 200 mm long (02 Nos), 3 Nos 100 mm size chromium plasted butt hinges, 2 Nos 200mm size Alu tower bolt and Aluminium body hydraulically door closer , designation No-3, universal type, weight between 61 to 80 kg etc including frame of section 100 mm x 44 mm x2.85 mm and door shutter, bottom portion covered with 9mm thick pre-laminated particle board, interior grade, pre-laminated on both sides with decorative choice lamination (colour/design approved by Engr-in-Charge) fixed to Aluminium frame work and top portion covered with 5.00 mm thick tinted glass and pattern, one mortion lock (Make: Harrison) with shutter and fixing including taking down of existing Chowkat with Shutter complete all as specifies and as directed by Engineer-in-Charge Make of aluminium section Hindalco/Jindal

S&F for powder coated aluminium window shutters (Glass shutter and wire gauge shutter) side hung having 75 mm x 44 mm x 2.85 mm thick stiles bottom rail and top rail including necessary fitting joinery cleat glassing packing snap beading 10 mm x 10 mm , 4 x Nos of anodised aluminium handle 150 mm size, 8 x Nos of chromium plated butt hinges 75 mm size and 4 x nos of 100 mm long aluminium tower bolt etc including frame of section 100 mm x 44 mm x 2.85 mm and including 5.00 mm thick tinted glass and including aluminium grill and fixing including taking down of existing Chowkhat with Shutter complete all as specified & directed by Engineer-in-Charge. Make of aluminium section Hindalco/Jindal

S&F for powder coated aluminium partition wall having 150mm x 44mm x 2.85mm thick bottom rail, 150 mm x 44mm x 3mm thick middle rail, 100mm x 44mm x 2.85 mm thick stile and top rail including necessary fitting joinery cleat, glazing packing snap beading 10 mm x 10 mm , Internal portion covered with 9mm thick pre-laminated particle board, interior grade, pre-laminated on both sides with decorative choice lamination (colour/design approved by Engr-in-Charge) fixed to Aluminium frame work fixing including taking down of existing portion complete all as specifies and as directed by Engineer-in-Charge Make of aluminium section Hindalco/Jindal

S&F Aluminium anodised powder coated Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed with 5mm thick tinted glass & one no. s/s wire mesh panels) upto 1.50m height made of (big series) frame 100 x 45 mm & sash 46 x 62 mm both having wall thickness of 1.5 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced galvanized mild steel section made from roll forming process of required length (shape & size according to aluminium section), appropriate dimension of extruded glazing beads and extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and as directed

S&F for Anodized aluminium powder coated window/ ventilator shutter side hung having 75 mm x 44 mm x2.85 mm thick stiles bottom rail and top rail including necessary fitting joinery cleat glassing packing snap beading 10 mm x 10 mm , 2 Nos of anodised aluminium handle 150 mm size, 2 Nos of chromium pated butt hinges 75 mm size and 2 nos of 100 mm long Alu tower bolt etc including frame of section 100 mm x 44 mm x 2.85 mm and including 5.00 mm thick tinted glass and including aluminium grill and fixing including taking down of existing Chowkhat with Shutter complete all as specified & directed

S&F in repairs door closer hydraulically of aluminium extruded section body regulated, designation No-3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg and fixed complete all as specified.

S&F in repair floor door closer of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 140mm complete all as specified and as directed.

S&F in repair aluminium floor door stopper 63 mm with two rubber legged all as specified and as directed

S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and as directed

S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and as directed

S&F in repair 250mm long mild steel sliding door bolts stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

S&F 100mm size butt hinges medium weight cold rolled mild steel all as specified.

S&F100mm size stainless steel butt hinges for fixing to PVC doors all as specified.

S&F 200mm long mild steel tower bolt stove enamelled black with bright bolt all as specified.

S&F 150 mm mild steel pressed handles oval type, stove enamelled black all as specified.

M&L for preparation of new wood and wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F aluminium anodised tower bolts 200 mm size fixed with machine screws complete all as specified and as directed.

S&F aluminium anodised Bow Handles 150 mm size fixed with machine screws complete all as specified and as directed

S&F mild steel 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed .

S&F in repair mild steel 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed

Dismantling structural steel work including door, gates but excluding framed truss etc complete all as specified and as directed

S&F Rolled/ tubular section mild steel work roof trusses (framed),trussed, purlins, rafters, crane gantries and heavy brackets framing (beams, tee, angle, channel or flat section) including MS plates, nut bolts etc complete conforming to Fe 410-W(GdeE-250) quality B complete all as specified and as directed

Dismantling wall and ceiling boards(fibre, pulp, insulation etc) or insulation boards/slabs, blankets, any type, any thickness and any shape including cover fillets and frame work complete all as specified and as directed

M&L in repair PVC hollow wall panelling 7 to 8mm thick colour/ design approved by Engr-in charge, inclusive of fixing to wall including moulding ends caps fixed with PVC sleeves and screws as required at site complete all as specified and as directed

S&F of armstrong mineral fibre acoustical suspended ceiling system with dune (Tegular) edge tiles with armstrong 24mm exposed grid. The tiles should have humidity resistance of 99%, NRC 0.5, light reflectance > 85% , thermal conductivity K = 0.052 - 0.057 w/m K, colour white, fire performance UK class 0/ class I (BS 476 pt-6 & 7) in module size of 600x600x16mm, suitable for green building application with recycled content of 32%. The tile shall be laid on Armstrong Prelude 32 with 24mm wide T section flanges colour white rotary stitching on all T sections i.e the main runner, 1200mm & 600mm cross Tees with a web height of 27mm and a load carrying of 7.1kgs/sqm and minimum pull strength of 100 kgs. The T section have galvanising of 90 grams per sqm and need to be installed with suspension system of Armstrong. All accessories manufactured and supplied by Armstrong world industries

M&L for galvanised iron water tubing 15 mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc including taking down the existing tubing complete all as specified

Ditto all as per srl item No. 80.00above but for 20mm bore tube complete

S&F in repair Stop valve,15 mm cast copper alloy chromium plated fancy type with long shank & cup (concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed in repair complete all as specified and as directed .

S&F in repair 15mm stop/angle valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and as directed.

S&F in repair Bib tap cast copper alloy chromium plated suitable for 15mm bore iron pipe with long body fancy type complete all as specified and as directed .

S&F Bib tap cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair suitable for 15mm bore iron pipe with long body fancy type complete fixed in repairs complete all as specified

S&F squatting pan WC Orissa pattern size 580 x 440 mm white with integral floor rest with P or S trap incl provn of lime concrete bedding incl breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specified

S&F Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern) incl seat cover and flushing pipe for pedestal pipe etc. complete all as specified and as directed

S&F in repair seat cover for water closet pedestal pattern all as specified and as direced

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action (top push type button) with inlet ball valve and float including flush pipe, ball valve, handle, bracket, PVC short bend etc complete all as specified and as directed

S&F PVC connection fiber, reinforced 45cm long with brass check nut and PVC washers at both ends complete fixed in repair complete all as specified and as directed

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed

S&F in repair Soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified .

S&F in repair acrylic corner set of 3 pieces (Size - 11", 9" & 7" and minimum thickness 5mm) as per sample approved by Engineer-in-charge all as specified and as directed

S&F 500 ltr rotational moulded polythylene water storage tank UV protected, antimicrobial triple layer (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description complete all as specified

S&F 1000 ltr rotational moulded polyethylene water storage tank UV protected, antimicrobial triple layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank of any description complete all as specified fixed in repairs complete all as specified and as directed

S&F in repair 20mm for ball valve brass high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed .

S&F in repair Pillar tap cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium platted screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed

S&F in repair brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to steel pipe (min size 300 mm) or union complete all as specified and as directed.

S&F in repairs Vitreous china wash hand basin, white, flat back 550x400mm including one number brass CP waste coupling, 32mm dia, PVC waste pipe with connector, brackets 2 Nos including cutting for and pinning in ends of brackets complete all as specified

S&F Brass CP Wash hand basin Mixture with capstan heads, chromium plated, screwd down high pressure screwed for iron pipes and fixed in repair. for mixing hot &cold water screwed down for iron pipe and fixed complete all as specified and as directed

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers including cantilever cast iron brackets, connecting union ,waste coupling and waste pipe overall size 495 mm x 420mm with bowl size 410 mm x 330 x 160 mm complete all as specified and as directed

S&F in repair Stainless Steel Sink with Drainage Board 1.0mm thick Overall size 915x460mm and Bowl size 410x330x160mm for Kitchen or Laboratory with Plugs, Washers, Waste Fitting 32mm bore (dia) of Brass Chromium Plated, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed

S&F in repair vitreous china Urinal, flat back , white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including and fixing of flush pipe, grating with waste coupling, and union for discharge pipe, waste pipe ,spreader etc, size of urinal 59cm x 39 cm x 37.5 cm all as specified and approved quality and as directed by Engr-in-Charge

M&L in repair mild steel pipe 25 mm dia curtain rod with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade including taking down old as approved by GE all as specified.

S&F in repair for stainless steel pipe 25mm dia fancy type curtain road fixed in the bracket and fancy type finials/side brackets (both side), shade as approved by GE all as specified

M&L in repair PVC (SWR) floor trap with grating including jointing to waste pipe fixed with solvent cement. Diameter of outlet in 75 mm) complete all as specified including taking out damaged floor trap in any type and position complete all as specified and as directed .

S&F n repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified

Cleaning of floor trap and applying of cement around the floor trap with sealant compound for arresting the seepage at any circumstances (Kitchen, Bathroom and Toilet ) all as specified and as directed by Engr-in-Charge. Make:- WACKER SILICONES (GP Silicone Sealant )

S&F PVC (SWR) pipes 110 mm dia with single socketed in any length with rubber ring joints fixed on brick walls or laid in trenches with PCC 1:4:8 complete hounching with bedding including demolition and braking up existing pipes with fittings complete all as specified and as directed

Ditto all as per Srl item No. 110.00 above but 75 mm dia

S&F PVC (SWR) bends 110 mm with access door complete all as specified and as directed.

Ditto all as per Srl item No. 112.00 above but 75 mm with access door

S&F 110mm PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repair Brass chromium plated tubular towel rail 20mm dia , D type, 60cm long between flanges in repairs complete all as specified and as directed

S&F in repair CP grating 125mm dia with centre hole all as specified and as directed by Engineer-in-Charge

Fixing in repair to steel/ ball bearing for rolling shutter gear operated type with bevel gear box and crank handle including carefully taking down existing shutters accessories and replacing all damaged part/ fittings and accessories etc and refixing teh same shutter with new fittings on same opening and making good the floor/ wall area and match the surface complete work including greasing the width of rolling shutter upto 5.50m wide and 6.0m high complete all as specified and as directed.

Demolition of brick work as in walls/parapet walls removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces, complete all as specified and as directed

Demolition of brick work built in cement mortar incl all quoins, arches pillars etc but excluding precast concrete articles all as specified

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) all as specified.

Ditto all as per Srl item No. 120.00 above but except bricks

Demolition of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) all as specified

M&L for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in benching, roof padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges complete all as specified and as directed

M&L for 10mm thick cement plaster in cement mortar (1:3) mixed with integral water proofing compound in the proportion recommended by manufacturer, on concrete roof surfaces finished even and fair, including cleaning the roof top by scraping down with water etc all as specified and as directed by Engineer-in-Charge (WPC shall be measured and paid separately under appropriate item of this BOQ).

Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all all protrusion to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V-groove filled with repairs mortar/ microconcrate/ general purpose grout as recommended proportionally as per recommendation of manufacture. Making of Gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acylic of cement weight complete all as specified and as directed.

Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin; harder) application with 100% water dilution and Pure polyurethane application in 2 coats with a total min consumption of 1.25 kg per Sqm. Application should be done with Graco sprayer by a company authorised applicator” complete all as specified and as directed

M&L for repairing of R.C.C projections, chajjias, roofs, facia and ceiling etc by necessary preparation. Scarping, cutting, chiselling derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.C.C surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2 kg per sqm but n.exc 3kg/sqm (if reqd) with or without facia and finished with cement and sand mortar (1:3) using coarse sand necessary form work and applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and as directed by Engineer-in-Charge

M&L for flush pointing in cement mortar 1:3 on brick tiles laid flat including racking out joints/ pointing, hacking for key, scrubbing down with water complete all as specified

M&L for chromium plated peg set of 5(PTMT), fixed with screws and plugging to rear side of door shutter in bath, complete all as specified and as directed.

Uprooting of trees, grass, bushes etc from brick wall/roof tiles or any surfaces of bldg including dismantling the required brick work /roof tiles/mud concrete etc for uprooting the vegetation etc and make good the same to match existing surfaces with same material or concrete 1:2:4 type B-1 after pouring the chemical (which destroy the growth of vegetation to place where vegetation removed).The rate shall include for scaffolding or any other arrangement required during this process upto 10 mtr height complete all as specified

Cleaning of over head tank of any description and any capacity descaling, washing complete with soap solution and removing vegetation around the over head tank/plate form including opening and reconnecting with GI tubing and writing month of cleaning with stencil having 3 inch height as site requirement complete all as directed by Engineer-in-Charge

S & F in repairs 20mm dia curtain rails, mild steel , chromium plated fixing in cup board with brackets, stops, rollers etc, all as specified

Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (below or above the ground level) complete all as specified and as directed .

M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick as in sub floors, sub base, hardstanding, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified & directed.

M&L for 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in sub floors, sub base, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified & directed.

S&F glass dividing strips 3mm thick and 38mm wide inserted in position conforming to design complete all as specified and as directed

M&L for 75mm PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection the surfaces even and smooth without using extra cement all complete all as specified and as directed .

Forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and as directed .

M&L for factory made chequered cement concrete tiles 30cm x 30cm x 18 to 20 mm thick set with grey cement and pigments jointed and pointed in neat coloured cement slurry in floors over and including 15 mm thick cement screed bed in cement mortar (1:6) including demolition of old tiles/concrete floor all as specified and as directed

M&L for laying 60 mm thick machine pressed precast concrete interlocking paver block with glosy finished and shape and size conforming to IS -15658-2006 of M-35 Grade with grey cement and pigment including taking down old stone slab/concrete floor complete all as specified and as directed complete all as specified and as directed. NOTE: The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE

M&L for 25mm sand cushion, filling under interlocking tiles including watering and consolidation complete all as specified and as directed

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, benching, edges of interlocking/ chequered tiles and the like including weathering, slightly rounded or chamfered angles throating, complete including necessary form work complete all as specified and as directed.

S&F Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), PCC 1:2:4, Type B0 (12.5mm graded aggregate) including all mouldings with frame Set in CM 1:4 including dismantling/ demolition of existing louvers/jallies complete all as specified and as directed

S&F Welded steel wire (weight not less than 4kg/Sqm) fabric supplied and fixed complete to wood or steel members including taking down existing steel wire complete all as specified and as directed

M&L for preparing Old Painted Wood and Wood base Surfaces of any description, not otherwise described over 10 Cm Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/grade), complete all as specified and as directed

M&L for preparing Old Painted steel Surfaces of any description, not otherwise described over 10 Cm Width or Girth and applying one Coat of Synthetic Enamel Paint (1st quality/grade), complete all as specified and as directed

S&F 30mm thick flush shutter, solid core construction, with block board core and ply wood face panel, commercial type both sides complete all as specified

S&F 30mm thick factory made PVC Flush Cup board shutter consisting of panel of hollow section thickness . Consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm inserted inside the hollow section of stiles. top and bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hallow profile section at an equal distance from top and bottom of door and fixed with hallow profile section using 5mm thick PVC sheet using screws Hollow PVC profile shall be lipped with 10 mm ( 5mmx 2) thick x 20mm width on stiles and rails using solvent cement . The inner panel shall be laminated with 5mm thick termite proof water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc. Complete all as specified as per direction

Dismantling structural steel works as in grills, doors, gates, purlin, rafter etc complete all as specified and as directed

M&L for pressed steel frame of size 125x60mm as per IS specification for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed

M&L for pressed steel frame of size 105x60mm as per IS specification for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed

S&F in repair factory made 18mm thick 100% solid WPC (wood polymer Composite) plain board of required size kitchen cabinet as in partition, shelves, wall, drawer ,shutter, etc of required colour comprising of virgin PVC resign of value 57-60 (suspension Grade), Calcium Carbonate and natural Fibres (Wood Powders/rice husk/wheat husk) and Non toxic additives, made from extrusion process WPC foam sheet single extruded (inner) with density not less than 650kg/cum manufactured by certified company having good screw holding capacity(Screw withdraw strength of 2000N (face) & 1100N (edge) Minimum compressive strength of 50N/mm2, modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with property of being Termit/Borer free, water/Moisture proof, Fire Retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, All as per direction of Engr-in-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company Make Rajshri

Ditto all as per Srl item No 153.00 above but solid WPC (wood polymer Composite) board decorative one side complete all as specified and as directed

S&F stainless steel self closing hinge of 75 mm size for PVC door shutter / kitchen cabinet complete as specified and as directed

S&F 30mm width continuous ( piano) hinges, mild steel bright finish or electro galvanised complete all as specified and as directed

S&F 100 mm size MS mat / glossy finish handle complete as specified and as directed

S&F magic eye brass best quality fixed in main door shutter approved by Engineer-in-Charge complete all as specified and as directed

S&F Hasp & Staple aluminium 100 mm , including bolt to hinge plate and fixed with screws with Cup Board shutter complete all as Specified

S&F in repair for S/S plate rack of superior quality size 775mm x 600mm and not less than 8 kg all as specified and as directed

Taking up of or down steel tubing and connections 15mm bore complete all as specified

SANDEEP JHANJI CONSTRUCTIONS (BID ID -3379332)

MS GURTEJ SINGH CONTRACTOR (BID ID -3380938)

SANMATI UDYOG (BID ID -3379632)