ADDITION/ALTERATION AND IMPROVEMENTS TO SALUTING BASE (BLDG NO P- 221) AND PROVISION OF FIRING POINT WITH COVERED SHED AT CARBINE RANGE AT INS CHILKA UNDER GE CHILKA

Amount

Surface excavation in any type of soil n.exc 30 cm deep and averaging 30cm deep and getting out etc all as specified and directed.

Excavating over areas in any type of soil, n exc 1.5 m deep and getting out etc all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil etc all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete etc all as specified and as directed.

M&L for reinforced cement concrete , M-30 (Design Mix) using 20mm graded stone aggregate as in foundations, including rafts, footing foundation beams plinth beams ; bases for coumns etc basement slabs and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete , M-30 (Design Mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for reinforced cement concrete , M-30 (Design Mix) using 20 mm graded stone aggregates as in beams, cantilevers, bressummers, lintels over 1.5 M span complete all as specified and as directed.

M&L for PCC type B1 1:2:4 (20mm grade aggregate) as in cement concrete in chajjas, roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S & F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto all as per above item but 5mm dia and over upto and including 8mm dia in stirrups, spacers and binders

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter to rough finished surface of cement concrete etc.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, to rough finished surface of cement concrete etc.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions to rough finished surface of cement concrete etc.

M&L for brick work with fly ash bricks, straight or curved on plain exc 6m mean radius built in cement mortar 1:6 etc all complete.

M&L for rendering 15mm thick on fair faces of brick or concrete sufaces in cement mortar 1:4 including finishing even and smooth withour using extra cementcomplete all as specified and directed.

M&L for preparation of new plastered external wall surfaces of any description over 10 cm width/girth and including applying two coat of weather coat anti dust emulsion paint, exterior grade of approved shade over a coat of alkali guard anti efflorescence primer as per manufacturer's instruction complete all as specified and as directed.

M&L for broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 typeC2 using 40 mm graded stone aggregate as in Sub base of flooring complete all as specified and directed

Returning filling incl spreading, levelling watering and well ramming in layers not.exce 25 CM etc all as specified and directed.

Removing excavated material, soil to a distance not exce 50M and depositing where directed at a level n.exe 1.50M above the existing point etc all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

M&L for Vitrified Ceramic light shade tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exc .0.42 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or colouredcement to match fixed over and including 15 mm thick screed in CM (1:4) complete all as specified and as directed.

M&L for Vitrified Ceramic light shade tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles 0.42 sqm but not exceeding 1.00 sqm, in floors etc. including on vertical surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10 mm thick screed bed in CM (1:4) complete all as specified and as directed.

Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for 18 to 20 mm thick Granite stone(of any type) work (table rubbed polised) in steps, jambs, pillars, window cills, cooking platform, office counter set etc. fixed over and including 15 mm thick cement morter (1:4) including pointing in white cement (1:2) using marbel dust with admixture of pigment to match with shade of granite.

M & L for providing and fixing stainless steel tube (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S&F stainless steel handrail ball( grade 304) 50mm dia on top of stainless steel tube and fixing arrangements all as specified and as directed.

S&F stainless steel handrail chain 6 mm dia ( grade 304) fixed with the hook of stainless steel tube and fixing arrangements all as specified and as directed.

M&L for preparation of old plastered decorated surfaces of external wall by brooming down or steel wire bruching, scraping down smoke soot, moulds, moss and efflorescencent salts and trading oil and greasy spots of any description over 10 cm width/girth and including applying one coat of weather coat anti dust emulsion paint, exterior grade of approved shade as per manufacturer's instruction and also rewrite the bldg No as per existing font style and size with enamel paint of approved shade complete all as specified and as directed

M&L for RCC nominal mix Type B1 1:2:4 (20 mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.

M&L for RCC nominal mix type B-1(1:2:4) 20mm graded aggregate as in Beams, cantilevers, bressuments, lintels over 1.5m span complete all as specified and directed.

M & L for 75mm thick PCC type C2 1:3:6 (40mm garade aggregate) as in plinth protection complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or concrete sufaces in cement mortar 1:6, including finishing even and fair without using extra cement complete all as specified and as directed.

M&L for steel work as in tubular purlins, rafters, trussses etc including special shaped washers, plates, clamps, cleats etc complete joining the pipes with ERW or induction butt welds complete all as specified and as directed.

M & L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')

S&F 50mmx50mm mesh size (nominal size of pitch of wires) 4mm dia of welded steel wire n exc 4 Kg/Sqm fabric supplied and fixed complete to wood or steel members complete all as specified and as directed.

S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

Supply only sand filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M & L for 100mm thick PCC (Plain cement concrete) 1:2:4 type B1 using 20 mm graded stone aggregate as in floor / hard standing / path all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate complete all as specified and directed.

M&L for 22mm width glass dividing strip,3mm thick inserting in the position of concrete to confirming design complete all as specified and directed.

M&L for preparing of surfaces of steel for painting of any description, over 10cm in width or girth, on new surface over a coat of primer of red oxide zinc and two coat of synthetic enamelled paint over it all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified and as directed.

S&F factory made 2nd class hard wood, 35 mm thickness of plain, framed, panelled shutters (two panels), with with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treatedto chowkats complete all as specified and as directed.

S&F medium weight, stainless steel butt hinges of 100mm size, complete all as specified and as directed.

S&F extruded aluminium alloy handles, 125mm long fabricated type, anodised all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 125mm fixed complete all as specified and as directed.

S&F 250 mm long aluminium anodised, sliding door bolts, with hasp staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and as directed

M&L for preparation of new painted wooden surfaces of any description not otherwise described over 10 cm width or girth of any and applying two coat of synthetic enamel paint over coat of primer of approved shade complete all as specified and directed.

M & L for Point wiring with 1.5 Sqmm PVC insulated and unsheathed single core multi stranded FRLSH grade copper conductor ISI marked 1100 volts grade drawn through PVC conceled conduit or PVC conduit as per site requirement heavy grade ISI marked with all accessories including PVC boxes (Make-Presto/Press fit) of suitable size as required for mounting of switches socket etc including 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable FRLSH grade for earth continuity and connecting to common earth dolly complete all as specified and directed :- (a) For one light point controlled by one switch

(b) For one Ceiling/Exhaust Fan point controlled by one swtich

(c ) For one socket point 5 Amps on the independent board

(d ) For one socket point 5 Amps on same board

Ditto all as per above item here in before but using 2.5 sq mm single core copper conductor cable of multistrand FRLS grade PVC insulated Unshethed 1100 volt grade for 16 Amps socket combination pt. including running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuety conductor along with wiring and connecting to common earth dolly for One 6 pin multi socket outlet, 16 Amps , independent all as specified and directed.

S & F Switch socket combination 5 in 1, 5 /15 A 5 in 1 flush type. complete all as specified and as directed. Make: Anchor/Havells.

S & F switch sockets combnation 2 in 1, 6 amps flush type complete all as specified and directed.

S & F ceiling rose 3 terminal PVC/polycarbonate isoloted body complete all as specified and directed.

S&F switch piano flush type single pole, one way 5 Amps 230 volt complete all as specified and directed.

Supply & fix LED light fitting 1 x 20 Watt, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as direected. .

Supply and fix LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection 35 W complete with clamp bolts,breacket all as specified and as directed. Make: Havells Cat No: LHEWEBP7PL6S025 or equivalent in Bajaj/Philips.

S &F stepped type electronic fan regulator 230 volt suitable for 1200mm/1400 mm sweep celing fan including necessary electric connection complete all as specified and directed.(Make: Anchor or equivalent)

Supply and Fix Ceilling Fan white/Ivory in colour complete with blades, down rods and accessories, 230 V, 1200 mm Sweep,min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC)Make : Khaitan/Crompton Greaves/Usha

S & F MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar 240 Volt, IP 43- Metal door. complete all as specified and as directed

S&F MCB SPN 40 Amp, 240 Volt C curve. complete all as specified and as directed. Make: Havells/Legrand/L&T.

S&F MCB SP 6 to 32 Amp, 240 Volt C curve complete all as specified and as directed. Make: Havells/Legrand/L&T.

Earthing complete with GI earth plate electronic 600 x 600x 6mm buried directly in ground vertically to a depth of not less than 2.25 m below ground level with the top edge of earth plate at a depth of not less than 1.5 mtr below ground level connected to GI earth lead 4 mm dia by means of nuts bolts washers etc made out of galvanized iron and GI wire connected to main switch/DB board including necessary excavation and earth work PCC (1 3 6) type C1 using 20mm graded stone aggregate earth chamber 40mm thick RCC cover type B1 (1 2 4 ) B1 using 20mm graded stone aggregate 20mm dia GI medium grade protection pipe upto main switch board etc complete all as shown in electrical plate No 3 of MES Schedule Part I.

Supply,installing, testing and commissioning of Outdoor type LT panel board of suitable size, pedestal mounted, CPRI approved totally enclosed, dust and vermin proof, front and back side openable, type IP 54 protection made of CRCA sheet 3.15 mm thick of size as per IS and having proper locking arrangement in front side door suitable for 440 volts, 50 Hz, 3 phase 4 wire system having Aluminium Bus Bar of 300 Amps including cable glands of suitable size for incoming and outgoing cables and comprising with and including following accessories and mounted on PCC Plat form min 30 cm from ground level and grouted in PCC 1:3:6, 100 mm thick, 0.25 m all round the panel board.complete with the following items housed in :- (i) MCCB 250 Amps, 4 pole, 36 KA, 415 V - 01 Nos Make L & T or its equivalent in Schneider or legrand (ii) LED Multi function with meters. - 01 Nos (iii) LED indicating lamp (b) Outgoing :- (1) MCCB 63 Amps, 4 pole, 25 KA, 440V - 06 Nos Make L & T or its equivalent in Schneider or legrand (ii) MCB 40 Amps, 4 pole, 10 KA, C Curve, 440V - 03 Nos Make L & T or its equivalent in Schneider or legrand

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core

M & L for natural river sand as cushioning of cables, including spreading and punning down complete all as specified. Note : punned thickness shall be measured for payment purpose

M&L for well burnt/fly ash bricks, of size 200x100x80 mm best locally available for cable protection in trenches, complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600×600× 6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip of size 25x4mm (up to 7.5 m in length from earth plate ) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point including earth work and excavtion in any type of soil, PCC 1:3:6 type C1 chamber and RCC 1:2:4 type B1 cover 40 mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for earth lead protection, 20 mm dia GI medium grade pipe for watering, water funnel, testing point etc complete all as specified and directed by Eng-in-charge and testing on completion.

SANJAYA KUMAR PALAI

HARI HARA NAYAK

BHARAT KUMAR BALL

KR Enterprises