GE(S) BTD TOKEN NO 27 OF 2022-23 REPAIR IMPROVEMENT OF TOILET BLOCKS IN ARMY PUBLIC SCHOOL BATHINDA UNDER AGE BR I UNDER GARRISON ENGINEER (SOUTH) AT MILITARY STATION BATHINDA

Amount

M&L brick work with sub class `B' bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 complete all as specified and directred

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directred

M & L 15 mm thick rendering in CM (1:6) on brick surfaces or conc surfaces on walls and finished even and smooth without using extra cement complete all as specified and directred

M & L for rendering 5 mm thick on concrete surfaces such as ceiling or soffits of chhajas etc; in CM 1:3 finished even and smooth without using extra cement complete all as specified and directred

Supply only integral water proofing compound of approved quality complete all as specified and directred

M &L for applying two coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directred

M&L applying three coat of white wash on newly plastered surfaces on wall including preparation of surface, complete all as specified and directred

M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:6 and including dismantling of old tiles / terrazo finish complete all as specified and directred

S&F glazed ceramic coloured tiles of approved quality in vertical surfaces 450 mm x 300 mm x 7 mm / 450 mm x 350 mm x 7 mm thick set jointed in neat cement slurry / paste and pointed in coloured cement to match with the tiles over and including 10 mm thick plaster in CM 1:4 and including dismantling of old tiles / terrazo finish etc. complete all as specified and directred

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directred

S & F 4.0mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.50 Sqm in each pane complete all as specified and directred

S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directred

Taking up or down 15 mm bore galvanised iron tubing and connection complete all as specified and directed.

Taking up or down 20 mm bore galvanised iron tubing and connection complete all as specified and directed.

M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and fixing in repair 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (weight 210 gms Minimum) complete all as specified

S & F in repairs 15mm bore, fancy type , chromium plated, angle valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle,screwed both ends for iron pipe complete all as specified and directred

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directred

S & F in repair PVC valveless, syphonic action type flushing cistern, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connectin to flush pipe of any size and pattern complete all as specified and directred

S & F in repair vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, wastes but including brackets complete all as specified and directred

S & F in repairs 15mm bore fancy type chromium plated brass bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directred

S & F in repairs 32/40mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directred

S & F in repairs CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified and directred

S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directred.

S&F in repair flush pipe of polyethene of low or high density or PVC, 32mm dia, for low level cistern and fixed complete all as specified and directed.

Dismantling and disconnecting of existing 100 mm bore cast iron soil vent pipe fixed to wall,laid in trenches incl all fittings & accessories, complete all as specified and directred

S & F 100mm bore, sand cast, cast iron soil waste and vent pipe with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, complete all as specified and directred

Sealing only joints of cast iron pipes and fittings 75mm dia with chemical cement and making the joints leak proof complete all as specified and directred

Sealing only joints of cast iron pipes and fittings 100mm dia with chemical cement and making the joints leak proof complete all as specified and directred

S&F in repairs oval access doors to cast iron pipes of 100mm bore with rubber washer & bolts & nuts as required complete all as specified and directred

S & F in repairs CI bends any radius, 100mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and directred

S & F in repairs 100mm bore CI branch pieces, double (spigot or socketed type) with oval access doors complete all as specified and directred

Fixing only CI fittings 100mm bore of any type & description complete all as specified and directred

M&L welding in repairs with thickness of metal not exceeding 6mm and not exceeding 2.5 cm in length etc complete all as specified and directred

S & F 150 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directred

Supply and fixing 125 mm long aluminium handles, fabricated type, anodised and fixed complete all as specified and directed.

S & F 100 mm size, mild steel butt hinges, medium weight,cold rolled fixed with screws / weldings to wooden/steel frames or chowkats, complete all as specified and directred

Cutting chases in brick walls girth exc 10 cm but not exc 20 cm wide for concealed water tubing etc and making good in CM 1:3 or PCC 1:2:4 as required complete all as specified and directed.

Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings, ( replacing floor traps/fittings if required and shall be paid at supplied only rate separately), sealing joints with solvent cement or other suitable materials and making joint leak proof and making good surfaces with PCC 1:2:4 or CM 1:3 (repair/replacement of tiles in floor shall be measured and paid separately), complete all as specified and directed.

Supply only floor trap 75/100 mm dia with grating including jointing to waste pipe complete all as specified and directed.

Supply only non skid ceramic coloured tiles 300 x300 x7mm thick complete all as specified and directed.

Supply only glazed ceramic coloured tiles 300 x200 x7mm thick complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40mm graded crushed/stone agg for foundations, filling & mass concrete, sub-base & sub-floors, etc. complete all as specified and directed.

M&L 25mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer complete all as specified and directed.

M&L 15mm thick cement plaster in CM 1:4 with water proofing compound (WPC to measurment & paid separately) and finishing top surface even & smoth as in roof slab /sunken floor , etc complete all as specified and directed.

Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed.

S&F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (20mm graded stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.

S & F 35 mm thick 2nd class hardwood, factory made shutters, plain framed panelled shutters (any number of panels) with with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both side. The size of rail & stiles as per IS :1003 (Part I), kiln seasoned and chemically preassure treated, complete all as specified and directed.

S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete all as specified and directed

S & F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings

M&L for stopping of leakage/Seepage in CI/PVC/GI pipes by using M-Seal all complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white with seat cover including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified and directed.

Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound as per manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces (Note : WPC shall be measured and paid separately) (b) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (c) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (d) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removing rubbish from the site as directed complete all as specified and directed.

M & L for benching with PCC (1:2:4) type B0 using WPC as per manufacturer's instruction along side wall adjoining to roof in concave shape complete all as specified and directed. Note : WPC shall be measured and paid separately.

S & F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60 gms) complete all as specified and directed,

S & F in repair Urinal partitions slabs terminating about 40 cm above floor line,fixed in repair complete all as specified and directed.

S& F in repairs Jet spray CP brass body complete all as specified and directed.

S & F in repair water cooler tap CP complete all as specified and directed.

M & L for Cleaning of old Roof / wall concrete surfaces & applied a coat of cold bituminous primer over cleaned surface @ 0.40 Kg/Sqm followed by APP modified five layer ploymeric membrane 3mm thick, minimum wt 3.50 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150gms/Sqm ) manufactured by M/S STP Ltd/IWL India Ltd or its equivalent, laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required and applying bituminous aluminium paint @ 0.10 Kgs/Sqm on APP membrance surface complete all as specified and directed.

M & L for Reinforced cement concrete type B1 1:2:4 (20 mm graged aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified and directed.

S & F TMT bars 6mm to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F Use and waste of form work to rough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and removal complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm but n.exc 4.0 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed.

Fixing only in repair urinal complete all as specified and directed.

fixing only in repair wash basin complete all as specified and directed.

Fixing only in repair PVC valveless, syphonic action type flushing cistern 10 Ltr capacity, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connection to flush pipe of any size and pattern complete all as specified and directe

S & F in repair 110mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps etc complete all as specified and directed,

S & F in repair 110mm bore of pipe PVC (SWR) fittings such as bends of any raduius, tee, shoe etc; fixed to PVC pipes complete all as specified and directed,

Note:- All debris obtained from dismantling, demolition and taking down (Except credited to contractor) shall be desposed off out side MOD land and charges, if any, as incurred in civil area as per their regulator shall be deemed to be including in quoted rates. No extra claim on this account shall be admissible.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/s Kamal Builders

Easyways Enterprises

M/S VIAJY BUILDERS & DEVELOPERS

K L JINDAL AND CO.