AS AS IN OFFICER TOILET AT ADMIN BLOCK P09 AND REPAIR TO GLASS AT NOM P16 AND COMPOUND WALL AT SAGAR 02 P19 AT KALPAKKAM UNDER AGE(I) NAVY CHENNAI

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed by Engineer in Charge

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed by Engineer in Charge

Rough excavation not exceeding 1.5 m deep and getting out complete all as specified and directed by Engineer in Charge

M&L for Cement concrete in foundations, filling and mass concrete Type B2 1:2:4 (40 mm graded aggregate) complete all as specified and directed by Engineer in Charge

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in 1:4 complete all as specified and directed by Engineer in Charge

Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in 1: 4 complete all as specified and directed by Engineer in Charge

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer in Charge

M&L for laying Moorum of 100 mm thick , spread, rolled and consolidated to gradient and camber required complete all as specified and directed by Engineer in Charge

S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cemeny and pigment complete all as specified and directed by Engineer in Charge

M&L Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 250 Sq. cm n exc 400 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed by Engineer in Charge

M&L for Mild steel bars 10mm dia and over,Fe-410-W (Gde.E-250) Part- I quality-A or E82 Fe 290 (Gde -E-165) cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer in Charge

Ditto, but 6mm to 8mm dia.

Dismantling of wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises including removing of all the debris to a distance n exc 2 km out side the base at the disposal of the contractor complete all as specified and directed by Engineer in Charge

M&L for glazed ceramic coloured tiles 300 x 450mm x7mm thick as in dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed plaster on fair faces of brick work/concrete in CM 1:3 to receive tiles as in dado complete all as specified and directed by Engineer in Charge

Demolition of stone slabs and tiles of any description or any thickness in floors, skirtings, risers etc laid ,bedded and pointed in any mortar complete all as specified and directed by Engineer in Charge

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including poining in white cement (1:2) using marble dust with admix?ture of pigment to match with shade of granite complete all as specified and directed by Engineer in Charge

Taking down chowkat or frame with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed by Engineer in Charge

S&F for ball catches of 8mm dia steel brass body and striking plates approved pattern fixing to the cupboard shutters, including lettering complete all as specified and directed by Engineer in Charge

S&F 100mm long aluminium handle cast type anodised complete all as specified and directed by Engineer in Charge

S&F 75 mm butt hinges, medium weight, cold rolled mild steel fixed complete all as specified and directed by Engineer in Charge

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer in Charge

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F Hasp and staple 100mm long aluminium anodised incl bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer in Charge

S&F 150 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer in Charge

M&L for Decorative laminate type 1 of 0.9mm thick of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed by Engineer in Charge

M&L for 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed by Engineer in Charge

S&F in repair vitreous china, under counter wash hand basin of size 505x405x185 mm white of oval shape with complete waste, chain and pug and precelain stopper including bracket etc complete all as specified and directed. Make : ESSCO (Index No - ECS WHT-703) or its equivalent make as given in particular specification as approved by AGE(I)

Supply and fixing in repairs pillar cock 15mm dia, with 450mm long braided hose screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly nut screwed for iron pipe & fixed. Make :- ESSCO (Index No - APR-101001N) or its equivalent make as given in particular specification as approved by AGE(I)

Supply and fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, flushing cistern, soft close seat cover of size 385x665x780mm, with P- trap and flush pipe) Make :- ESSCO (Index No - ECS-WHT-751P180SPP for EWC & ECS-WHT-201 for cistern) or its equivalent make as given in particular specification as approved by AGE(I)

Supply and fixing stainless steel towel ring of round shape complete all as specified. Make : ESSCO (Index No - AEC-1121N) or its equivalent make as given in particular specification as approved by AGE(I)

S&F frameless glass door shutters of size 1.00 X2.10m using 12mm thick factory toughened plain sheet glass using the following stainless steel fittings of polished chrome finish (Satin stainless steel finish for handles) including acid finish for the entire surface of the door with white acid leaving tag line of approx. 300X300mm size using suitable stencil etc. on openable shutter and including cutting necessary holes and cut outs complete all as specified and as directed by the Engineer-in-Charge: (a) Corner lock patches with EPC and trike plate XL-C-4011A: 1 Nos. (1 No. for each openable shutter) (b) Floor springs with 90o open (EN 4): 1Nos. (1 No. for each openable shutter) (c) Top patches XL-C-4012: 1 Nos. (1 No. for each openable shutter) (d) Bottom patches XL-C-4013: 1 Nos. (1 No. for each openable shutter) (e) Top pivots XL-C-4014: 1 Nos. (1 No. for each openable shutter) (f) 450mm long H-Type handles 25mm dia., of grade SS 304, XL-C-3003A: 2 Nos. (1 set. for each openable shutter)

M&L for Demolition of Brickwork or stone/ boulder masonry, laid dry complete all as specified and directed by Engineer in Charge

M&L for Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer in Charge

M&L for Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed by Engineer in Charge

Providing, cement concrete type B0 1:2: 4 (12.5 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer in Charge

Rendering 10mm thick on fair faces of brick work or concrete surfaces 1:6 complete all as specified and directed by Engineer in Charge

M&L for rough cast plaster as specified complete all as specified and directed by Engineer in Charge

M&L for preparation of new surface of wall for applying Priming plastered and other surfaces with alkali resistant priming paint and applying two coats with cement paint, ditto complete all as specified and directed by Engineer in Charge

M&L for preparation of new surface of wall for applying Priming plastered and other surfaces with alkali resistant priming paint and applying two coats with cement paint, ditto complete all as specified and directed by Engineer in Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer in Charge

Fixing only Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer in Charge

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer in Charge

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engineer in Charge

M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm exc Exc 50mm and n.Exc 100 mm deep complete all as specified and directed by Engineer in Charge

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer in Charge

M&L for cement concrete type B- 2, 1:2:4 (40mm graded aggregate) 100 mm thick complete all as specified and directed by Engineer in Charge

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with white cement and pigment complete all as specified and directed by Engineer in Charge

Point wiring for One light point controlled by one switch with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core FRLS drawn into and including non-metallic rigid PVC conduit of 20 mm dia,concealed FRLS wiring, along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof excluding Modular Metal flush box and white cover plate with frame the switches, sockets, fan regulator etc as required suitable for Modular type fitting /fixture etc witch shall be measured and paid separately complete all as specified and directed by Engineer in Charge

All as per Sl item No. 48 above but for One Ceiling fan/Exhaust fan point controlled by one regulator / switch.

All as per Sl item No. 48 above but for One 3 pin socket outlet 5 amps socket on independent board

All as per Sl item No. 48 above but for S&F switch modular 10 amps one way flush type 1 module.

S&F switch modular 16 amps one way flush type 1 module.

S&F socket modular 2/3 pin 10 amps flush type 2 module.

S&F only electronic modular fan regulator 120w step type 2 modular.

S&F modular white cover plate with frame 1 module

S&F modular white cover plate with frame 4 module

S&F modular white cover plate with frame 8 module

S&F Modular Metal flush box 1/2 Module

S&F of Modular Metal flush box 4 Module

S&F of Modular Metal flush box 6/8 Module

S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 3 core 6 sq. mm

M&L for sub main wiring with 2 runs of 4 sqmm PVC insulated stranded copper conductor FRLS cable and one run of 4sqmm copper FRLS cable as earth lead in suitable PVC conduit all as specified.

M&L for sub main wiring with 2 runs of 2.5 sqmm PVC insulated stranded copper conductor FRLS cable and one run of 2.5sqmm copper FRLS cable as earth lead in suitable PVC conduit all as specified.

S&F Rigid non-metallic 25 mm PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.

S&F MCB DB SPN 4 way complete in SS enclosure double door type with 200 amps rated busbar.

S&F MCB DP 230 Volts 40 Amps with 10KA breaking capacity

S&F MCB SP 230 volts 5- 40 Amps with 10KA breaking capacity

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as specified and directed by Engineer in Charge

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete all as specified and directed by Engineer in Charge

S&F Ultra bright compact 5W LED downlighter with high efficacy LEDs, ideally suited for low ceiling areas to give glare free light (IP44 from front only). complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make Havells Cat Part No: ORBITDLR5WLED840S, Or equivalent in Philips,Crompton, Bajaj as approved by AGE(I).

S Dilli