REPAIR/ MAINT OF BITUMINUS CONCRETE ROADS AND ROAD FURNITURES AT JUTOGH CANTT UNDER GE (I) JUTOGH

Amount

M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces n exc 50mm deep in area n exc 400 sqm complete all as specified and directed.

M&L for preparing un surfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly priming/tack coat with paving bitumen of Grade VG-10 at 10 Kg per 10 Sqm, complete all as specified and directed.

M&L for providing 50mm thick Premix bituminous, macadam using paving bitumen any penetration binder content of 4% by weight of total mix, binded with 0.09 cum of stone chippings, 6.3 mm size of grade VG-10 laid/rolled and compacted to required gradient and camber with power roller 8 to 10 tonne to a uniform smooth surface, complete all as specified and directed.

M&L for preparing existing black top surfaces/filled pot hole surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with Air compressure to remove all loose dirt etc in black top surfaces complete all as specified and directed.

M&L for applying evenly priming/tack coat with bituminous primer using Paving bitumen of grade VG- 10 at 5 Kg per 10 Sqm using of mechinical sprayer complete all as specified and directed.

M&L for Bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 5% binder content using paving bitumen of Grade VG 10 by weight of total mix, spread by means of mechanical paver, rolled and compacted to required camber and gradient with power roller 8 to 12 tonne to a uniform smooth surface complete all as specified and directed.

M&L for repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 30 mm in depth, making good by applying tack coat using paving bitumen of grade VG-10 @ 5 kg per 10 sq m, putting in premixed bituminous macadam, using paving bitumen of grade VG-10, binder content 4% by weight of total mix, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm complete all as specified and directed.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour white and yellow confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc., complete all as specified and directed.

S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions, complete all as specified and directed.

S&F metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4, (150x150x300mm), type B-1, complete all as specified and directed.

M&L for convex mirror of 100 cms dia, made up of polycarbonate reflective mirror of ABS body complete with mounting hardware, clamp and GI pipe 65mm dia of required height etc including PCC 1:3:6, type C-2, foundation of size 400x400x600 mm and necessary earth work excavation complete all as specified and directed.

Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed.

M&L for walling of random rubble, uncoursed well bonded, built in CM(1:6) as in parapet, steps ccomplete all as specified and directed.

M&L for walling of random rubble, uncoursedwell bonded, built in CM(1:6) as in parapet, steps except stones, complete all as specified and directed.

Taking down plastering of any description and in any position in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 20 mm thick on fair faces of stone surfaces in cement mortar 1:4 etc., complete all as specified and directed.

M&L for preparation of new or previously untreated plastered surface and applying Two coats synthetic enamel paint over priming paint plaster coat on surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and directed.

M&L for preparation of old painted plastered surface and applying one coats synthetic enamel paint on surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 12.5 mm graded crushed stone aggregate as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throttling, as directing including necessary form work, complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in surface channels and drains and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4, type B-0, using 12.5 mm graded crushed stone aggregate as in kerbs complete all as specified and directed.

M&L for 100 mm thick, PCC 1:4:8, type D-2, using 40 mm gragded crushed stone aggregate as in sub base for flooring, complete all as specified and as directed.

M/S kuldeep kumar khullar

M/S Shiv Kumar