Renovation work at HRD cell, Udyog Bhawan, Jaipur.

Amount

"Providing and fixing Hollow core partition wall using 50x50 mm Chir wood frame 600 mm c/c on both directions excluding door opening portion with antitermite treatment as per direction of Engineer incharge and as per specifications (Drawing enclosed) as below : 1. 50x50 mm Chir wood frame 600 mm c/c on both directions shall be fixed upto roof/beam height i.e. 10ft/8ft. Frame should be supported at floor and roof with horizontal post (wherever required) of size 50X50mm thick Chir wood 2. 12 mm thick MDF board (Greenlam make) both side (upto height i.e. 7ft of total false ceilig height of 8 ft) shall be fixed on both sides of chir wood frame. Laminate 1mm thick (Greenlam/Century) of approved quaity & colour shall be fixed/pasted over MDF board upto 7ft height. 3. Frosted glass of 8mm thickness (Saint Gobain or equalvent etc.) shall be fixed in a heigt of 1ft (12") at the top end of 8ft height wall panneling. complete as per direction engnieer incharge. Teak wood beading 25mmX20mm is to be used for glass fixing. Teak wood beading and frame is to be finished with melamine polish. 4. Partition outside frame shall be made in good guality wood. 5. Total thicknees of hollow core wall partition shall be 76mm. (Chir wood frame + MDF board on both sides + laminate on bothsides) 6. The cost is inclusive all labour, material etc complete in all respect as per drawing & design enclosed & approved by engineer in charge. 7. Area of aminated parttion below false ceiling only to be measured for payment. (Perspective view shall be as per enclosed drawing-A & A1) "

Providing and fixing of 30mm thick Flushdoor of approved brand with 5mm thick glass fixed in the half portition with 25x20mm teak wood beading to be finished with melamine polish. On the remaing part of the door should be finished with 1mm thick mica as per approved brand and shade and colour. The door also shall have the door closer of good quality make of dorma or equalent with approved brand mortise lock, stopper etc. with brass accessosries. The cost is inclusive all labour, cutting, makeing hole etc. complete in all respect as per approved by engineer in charge.

Providing and fixing wallpanlling using 50x50 mm Chir wood frame 600 mm c/c with antitermite treatment fixed with wall and 19mm thick commercial board of approved brand to be fixed on the frame with 1mm thick mica of approved colour and brand shall be pasted on it for the rich look.The cost is inclusive all labour, cutting, fixing etc. complete in all respect as per approved by engineer in charge.

Dismantling of existing wooden partitions & cubical panels at HRD Hall complete in all respect. Disposal of unserviceable as per direction of engineer in charge. No reclaim of dismantelled material by Corporation.

Providing and fixing of Workstation Systems as per specifications: (a)size 2 seater linear overall size : 2820 x 650 x 1350mm (L x W x H ) - 14 set, Each seat size : 1350 x 600 x 750mm (L x W x H): (b) Aluminium Partition: There would be partition panels of overall thickness of 60+0.5mm of minimum Blow sizes fixed in a cross sectional fashion with the help of a right angle/straight connectors of suitable size, as per requirement and drawing. The panel would be made with a combination of Aluminum sections of overall thickness of 60mm and MDF board sandwich panels of an overall thickness of 57mm +1mm.The lower section of the partition panel will be of height 750mm up to the worktop and it will be covered with Laminate of matching color on both sides of the panel. The partition portion just above the worktop of height 450mm will be provided with a Matching Mica Laminated board on both side. The partition panel will have a double cable wire raceway management system in the bottom & above the worktop of an overall size of 120mm x 60mm. The inner side having a cable management system which provides a usable area of 90mm x 57mm. The cable management system is provided with a bottom cable raceway cover of 100mm width for easy laying of cables. The cover is having push fit arrangement for easy opening and compact fixing of cable raceway. Each aluminum partition section will be duly powder coated with matching colour of minimum 40-60 microns thickness and it should be able to withstand minimum 1000 hrs. of salt spray test/impact resistance of 150 kg-cm. Worktop: The worktop will be made out of 25mm thick laminated MDF board all Flat edge duly sealed with1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. The worktop will be joined with proper jointers. Pedestal Unit: The pedestal unit of size 725 x 375 x 450mm(H X W X D) made out of 18mm thick prelaminated MDF board, having three number of drawer units, the two top units of 150mm depth each and the bottom drawer of 375mm depth used as the file storage unit. The front shutters matching with top surface finish all flat edge 1.3mm thick PVC Edge banding of matching colour on the remaining sides. The drawers are mounted on steel telescopic channels including necessary hardwares, handle locks etc. Accessories: Provision with each seat one keyboard tray(metal), CPU trolley (metal) The entire workstation is complete in all respects and made as per specification and as directed by engineer-in-charge.(Perspective view shall be as per enclosed drawing-B & B1)

Providing and fixing 12 mm thick toughened glass frame less door with patch fittings as per design and drawing with stainless steel handle of approved design 450 mm x 32 mm of approved design, stainless patch lock ,floor spring complete in all respect as per direction of engineer in charge.

Bidder Name

Amount

Rashmi Enterprises(GSTN-08AAEFR3518G1ZA)

Samridhi Associates(GSTN-08ABYPG1735F1ZH)

R Contractor(GSTN-08CBGPD2685F1ZP)

M/S JAIPUR CRAFT AND ART(GSTN-08AYMPA1844L1Z9)

Rashmi Enterprises

Samridhi Associates

R Contractor

Rashmi Enterprises

M/S JAIPUR CRAFT AND ART

Samridhi Associates