Renewal of CC Road and Formation of BT Road Removing and Refixing and Providing Paver Block Road in ward no 46,49

Amount

Earth work excavation for foundation in Hard stiffclay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small sizeboulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil,sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum The Rate inclusive of all charges such as Earth work and remove the same away from the site etc, complete as per standard specifications.

Providing and laying, spreading and compacting 0.396m3 of 45-22.40mm & 0.528m3 of 22.40-2.36mm & 0.396m3 of 2.36mm and below metal stone aggregate to Wet Mix Macadam (WMM) specification including premix the materials with water at OMC in machanical mix plant carriage to mixed materials by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clause 406 of MORTH specifications.

Providing and laying Tack coat of 7 kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications.

Providing and laying Tack coat of 2.5 kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications.

Providing and laying Tack coat of 2 kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications.

Providing and laying 50 mm compacted thick Dense Bituminous Macadam using 0.24 cum of 26.5-13.2 mm graded metal and 0.25 cum of 13.2-2.36 mm graded metal and 0.23 cum of 2.36 mm & below metal with 53.20 kgs of 60/70 bitumen for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tones capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc., including labor charges for loading bitumen in to bitumen tank and metal to feeder unit, labor for attending to paver site etc., including hire charges and fuel charges for 20- 30t C M P with bitumen boiler, tipper trucks, paver finisher, vibratory rollers and all other tools and plants required, including all other incidental charges etc., complete using C M P clause 505 of MORTH Rev-5 specifications.

Providing and laying Bituminous concrete to 30/40mm thick using 0.13 cum of 19.00-9.50 mm graded metal and 0.17 cum of 9.50-2.36 mm graded metal and 0.26 cum of 2.36 mm & below metal with 50.30 kgs of 60/70 bitumen and for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 40mm / 30mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc., including labor charges for loading bitumen in to bitumen tank and metal to feeder unit, labor for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler, tipper trucks, paver finisher, Vibratory rollers and all other tools and plants required, including all other incidental charges etc., complete using C M P clause 507 of MORTH Rev-5 specifications.

Road marking with hot applied thermoplastic compound with reflect rising glass beadsd on Bituminous surface Providing and laying of hot applied thermoplastic compound 205mm thick including reflect rising glass beads @ 250gms .per sqm. area. thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level uniform and free from streadkss dand holes etc complete.

Dismantling the Existing Cement Concrete Road etc., complete as per standard specification.

Providing and fixing Bitumen Pad for Expansion joint in between pavement slabs to12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc,complete as per standard specification.

Plain Cement Concrete 1:1.5:3 (one cement, one and half fine aggregates and three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification.

Removing the Existing Paverblock M40 grade 80mm thick in the rate including Removing and Stock to the Same Site and tranporting loading unloading and Labour Charges and Other tools etc.complete as per standard specification.

Re Fixing of Existing Removed Paver block M40 grade 80mm thick & 60mm thick in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Supplying and laying rubberized interlocking Paver block M40 grade Providing and levelling of 80mm thick high strength type conforming IS 15658 – 2007 of rubberized interlocking paver lock in size of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skidding surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers, sweeping transporting loading unloading of laying paver block as per standard specification etc.,

Supply of FRC Manhole 600mm size dia cover with frame including cost of conveyance loading fixing the same etc complete

Raising the existing circular manhole in heavy type inclusding the removing the exisiting the manhole cover with frame and dismantling the existing the cement concrete wall and tar road surface around the manholes using 1:2:4 20 mm jally for raising the exisisting the manhole wall and using 1:2:4 with 20mm chips for finishing the top surface of manhole etc complete .

Add GST 18%

VIRUMANDY CONSTRUCTION (BID ID -1235841)