SPECIAL REPAIRS TO BLDG NO T-380, T-381 OF MES COLONY AND ADDN / ALTRN TO TOILET IN BLDG NO P-21 AT GRC KAMPTEE.

Amount

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Demolition of plain cement concrete in ground floor & paving not exc 15cm thick above or below ground level complete all as specified and directed.

Dismantling of brick work or stone/ boulder masonary built in cement mortar including ashalar facing dressed stone and pre-cast concrete articles complete all as specified and directed.

Taking up or down steel tubing of 15mm dia and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing of 20mm dia and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling of asbestos cement/ transculent sheet corrugated/ semi-corrugated sheets in roof coverings including ridges complete all as specified and directed.

Dismantling of wall and ceiling board (fibre, insulation etc) or insulation board, slabs, blankets, any thickness including cover fillets complete all as specified and directed.

Dismantling water tank of capacity 500 ltr and removing to store of any description complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500ltr capacity, hoisted and fixed in position complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking of shutter from the frames) not exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking of shutter from the frames) exc 1.50 Sqm and not exc 4 sqm complete all as specified and directed.

Taking down shutters of any description not exc. 2.00 Sqm complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 mtr mean radius built in CM 1:6 (using old size brick) complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for joint free coloured ceramic tiles 7 to 8mm thick, area of each tile exceeding 0.18 Sqm but not exc 0.38 Sqm in floors etc set & jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

All as per item No 17 above but in skirting/dado including 10mm thick backing coat in CM 1:4 finished even and fair complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350mm x 450mm, on vertical surface such as skirtings/ dados, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile and including 10mm thick backing coat in CM 1:4 finished even and fair complete all as specified and directed.

M&L for joint less non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over & including 15mm thick cement screed bed in CM 1:4 complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B0 (using 12.50mm graded stone aggregate) as in coping, haunching, rounded or chamfered on edges including necessary from work complete all as specified and directed.

S&F GI tubing 15mm bore, medium grade with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed.

S&F GI tubing 20mm bore, medium grade with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate), as in plinth protection and finishing surfaces even & smooth without using extra cement including mist filling in the joint complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 type B1 (using 40mm graded stone aggregate) as in PCC path /hard standing and similar works complete all as specified and directed.

S&F CI nahani trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) complete all as specified and directed.

S&F in repairs vitreous china squatting pan "orissa pattern" size 580 x 440mm, white with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs stainless steel kitchen sink 1.00mm thick for kitchen with plugs, washer and waste 32/40mm dia including bedding in cement mortar on to dwarf wall or including fixing cantilever cast iron brackets and connecting union to waste pipe, overall size 495mm x 420mm, bowl size 410 x 330 x 160mm complete all as specified and directed.

Supply only PVC valve less syphonic action type flushing cistern, 10ltr capacity, low level, white/coloured with inlet ball valve float and handle including bracket (including taking down old cistern) and fixing of PVC flush pipe 32mm dia and PVC connection pipes complete all as specified and directed.

Supply only flush pipe of polythene of low or high density, 32mm dia, PVC for low level flushing cistern complete all as specified and directed.

Supply only PVC connection 15mm dia, 450mm long including brass ferrules on both ends complete all as specified and directed.

S&F in repair brass chromium plated shower rose, 125mm long complete all as specified and directed.

S&F 15mm dia bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm dia stop valves, fancy type and chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair stop valve, 15mm dia, cast copper alloy, chromium plated, fancy type, high pressure with crutch or butter fly handle, screwd for iron pipe or union and fixed complete all as specified and directed.

S&F pillar tap, 15mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair vitrous china wash basin, white, flat back, size 450x300mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and fixing of flush pipe, waste fitting, PVC connection and pillar tap complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall & applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new surfaces of wall & applying two coats of oil emulsion distemper over a coat of birla white wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of surfaces of wall & applying two coats of oil emulsion distemper over a coat of birla white wall care putty complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surafces of any description over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surfaces of any desription over 10 cm width or girth & applying two coats of synthetic enamel piant over coat of primer complete all as specified and directed.

M&L for preparation of new steel surafces of any description over 10cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for brooming down surfaces of any description and applying two coats of white wash on old decorated surfaces of walls including preparation of old surfaces & filling cracks and holes etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and directed.

S&F structural rolled mild steel as in roof trusses (framed), purlins crane gantries, rail and fastenings and heavy brackets framing (beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified and directed.

S&F factory made plain framed panelled shutter, 35mm thick (two panel) with lock rail and panel 12mm thick veneered particle board with commercial veneering on both side, the size of rail and stiles as per IS:1003(Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides, 30mm thickness complete all as specified and directed.

S&F factory made solid PVC moulded door shutter (with wood free EPS), 28 to 30mm thick (Stiles) with 2, 4, 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face & fixing in frame at site as per drewing and as shown on SSR complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube & fixing in opening as per specification & drawing complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5mm of flat iron etc complete all as specified and directed.

S&F steel window with side hung shutters (glaze & gauze shutter) including projecting or box type hinges with steel handle peg stay and divided into squares with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5mm flat iron etc complete all as specified and directed.

All as per item No 58 above but without glazing bars complete all as specified and directed.

S&F 100mm long mild steel medium weight cold rolled butt hinges and fixed with screw/ welded to frames etc complete all as specified and directed.

S&F aluminium handles cast type, 150mm long, complete all as specified and directed.

S&F 150mm long, aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 100mm long aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded setions and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Hacking out old broken glass of any thickness, size and quality from wooden/ steel frames etc complete all as specified and directed.

S&F sheet glass ordinary quality, 3mm thick and glazing with oil putty in squares not exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F 3mm figured glass, pin head type and glazed with oil putty in sqm not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 25mm dia curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and directed.

S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of size 24x36x10 inch, minimum thickness of steel sheet 0.8mm, including necessary drilling, fixing with screw, plugs in kitchen etc complete all as specified and directed. Make:- Nirali / Prayag / Anjali.

S&F CP towel rail 600mm long, fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 190 gms) complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick set, including screed bed or bedding layer 15mm thick mortar in CM 1:4 finished even and smooth for laying floor finishes, jointed and pointed in neat cement slurry in floor with grey cement and no pigment complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick laid over and including 20mm thick cement mortar 1:6 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.

M&L for kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed/ backing coat 15mm thick in CM 1:4 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.

Demolition of RCC in suspended work and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

M&L for providing reinforcement cement concrete M-20 (Nominal mix) 1:1.5:3 as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in PCC drains, haunching, benching, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for extra for forming fair finish drain or channel, 30cm inner grith in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cemnt mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) as in flooring complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in flooring, finished even and smooth using extra cement complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan to any radius, in half brick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for RCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in lintel band complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 86 above but 5mm dia and over upto and including 10mm dia as in stirrups complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet trip of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts 125mm of extruded section and fixed complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast and extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 125mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 15mm unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, with all fitting complete all as specified and directed.

S&F 20mm unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, with all fitting complete all as specified and directed.

S&F in repair 15mm dia bib tap standard of PTMT any colour, screwed for iron pipe and fixed (min weight 90 gms) complete all as specified and directed.

S&F vitreous china squatting pan "Orissa pattern" size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed.

Taking down unserviceable point wiring with copper / aluminium conductor cable of (light, fan, plug & power plug point) complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell / buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls / floor etc to macth with existing surfaces including white washing / colour washing /distempering complete all as specified and as directed.

Taking down old unserviceable MCB, sheet metal enclosure, DB, main switch etc and making good distrubed sufaces of wall complete all as specified and as directed.

Taking down carefully unserviceable sub main wiring of any size/ capacity and making good disturbed sufaces to match with the existing surfaces complete all as specified and directed.

M&L point wiring 1100 volt grade single core FR PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade, concealed on surface of wall/ ceiling as per site requirement including FR PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel terminal boxes/ modular boxes sunk on wall for mounting of any type (modular/ piano type) switches, switch sockets, fan regulator etc including laminated sheet cover 3mm thick / white top modular cover any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch.

All as per item No 101 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 101 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 101 above but one 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

All as per item No 101 above but one bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per item No 101 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with 1100 volt grade two single core FR PVC insulated unsheathed stranded copper conductor cable 2 x 4.0 Sqmm with and including 1 x 4.0 Sqmm copper conductor earth continuity wire drawing in existing PVC conduit of not less than 20mm dia, medium grade concealed in wall/ceiling complete all as specified and directed. Note:- Accessories for point/sub main wiring like PVC junction box, bend, tee, elbow shall be of same make.

S&F modular switch, one way, 6A, 1 module complete all as specified and directed.

S&F modular switch, one way, 16A, 1 module complete all as specified and directed.

S&F modular socket, 6A, 2/3 pin combined, 2 module complete all as specified and directed.

S&F modular socket, 6A/ 16A, 2/3 pin combined, 2 module complete all as specified and directed.

S&F ceiling rose, surface type 2/3 terminal, 5 amps complete all as specified and directed.

S&F electric bell ding dong, AC, 230V, single phase complete all as specified and directed.

S&F bell push switch, modular type, single pole, one way, 5 Amp, 240V complete all as specified and directed.

S&F 0-4 step, 2 module, modular type electronic regulator for ceiling fan of 1200/1400mm sweep, 240 volts, 120 watts, single pole complete all as specified and directed.

S&F 18-22watt LED tube batten fittings complete with aluminium body including tube rod, driver with not less than 2000lumen output and input rated voltage of 240V connecting with 2 core 1 sqmm copper conductor cable complete all as specified and directed. Make:- Philips cat No Astra line 20W / CG cat No LCTLN-20-CDL / Surya cat No SLE BT 20 / Luker cat No LT 524WH.

S&F lamp holder, insulated body with back plate for angle / batten fitting complete all as specified and directed.

S&F LED batten fitting 2' length including drivers having energy consumption 9-11W, 230V, 50Hz, 6500K, not less than 800 lumen, prewired complete all as specified and directed. Make:- Philips Cat part No Slim line 9W, Luker Cat Part No LT5M09, Crompton Cat part No LCTL-9-CDL.

S&F LED light fitting 10W bulk head luminaires with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable of suitable size of 230V, 50Hz complete all as specified and directed. Make:- Bajaj cat part No BIBWP 10W / CG cat part No LBHN 10W or equivalent in Luker.

S&F building security light LED 25W with lumen output 2000 with driver with rated voltage 240V, 50Hz including mounting GI, made out of 25mm dia light grade pipe 0.8m bent to shape including FI clamps, nut bolts etc complete all as specified and directed. Make:- Philips Cat part No BRP020, Luker Cat part No LST24 WH, CG Cat part No LSTS-25-CDL.

S&F sheet metal enclosure, single pole & neutral for 240 volts, 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB, single pole, 240 volt, 6 to 40 amps, 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F MCB single pole and neutral, 240 volt, 6 to 40 amps, 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F MCB triple pole and neutral, 240 volt, 40 to 63 amps, 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F MCCB TPN, 40 amps, 415 volts, 50 Hz, 16 KA with enclosure and connecting with incomer cable using suitable size lugs as required and connection to main DB using 10sqmm x 4 FRLSH copper conductor complete all as specified and directed.

S&F exhaust fan, metallic body, single phase, 300mm sweep, 230V, 50Hz with nuts, bolts and washers and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose and making holes complete all as specified and as directed.

M&L for earthing complete with galvanized street earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 TYPE B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.1,03,315.00]

M/s Rahul Traders

M/S J.A CHAWHAN

SHUB CONSTRUTION

Shri Mohan Brother

M/s DS Khekde

khushal constructions

M/s M.G. Hargunani

M/s B S Jain

Bidder Name

M/S J.A CHAWHAN

SHUB CONSTRUTION

DEESHA CONSTRUCTIONS

khushal constructions

M/s B S Jain

M/s Rahul Traders

Shri Mohan Brother

M/s DS Khekde

M/s M.G. Hargunani