Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹24.8 LAccepted-AOC C O BIPIN KUMAR VILL SATNAPUR POST BAHADURGANJ DISTT GHAZIPUR UP 275201 | BAHADURGANJ | GHAZIPUR | UTTAR PRADESH | 275201 | 1 | Accepted-AOC L-1 | |
| 2 | 2₹28.0 L+₹2.0 L (7.67%)Rejected-Finance | 2 | Rejected-Finance Being Other than L-1 | |
| 3 | 3₹29.0 L+₹3.1 L (11.8%)Rejected-Finance MD 1 236 SECTOR D1 LDA COLONY KANPUR ROAD LUCKNOW U P PIN 226012 | LUCKNOW | UTTAR PRADESH | 226012 | 3 | Rejected-Finance Being Other than L-1 | |
| 4 | 4₹29.6 L+₹3.6 L (13.8%)Rejected-Finance | 4 | Rejected-Finance Being Other than L-1 | |
| 5 | 5₹30.7 L+₹4.7 L (18.2%)Rejected-Finance | 5 | Rejected-Finance Being Other than L-1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
6 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST LUCKNOW
GE EAST LUCKNOW
REPAIR/ REPLACEMENT TO JOINERY AND SANITARY FITTING BLDGS LOCATED IN BS MARG IN AREA OF AGE B/R-II UNDER GE (EAST) LUCKNOW
2023_MES_574226_1
GE/E/LKO/T-55 of 2022-23
Open Tender
Civil Works
Item Rate
270 days
GE EAST LUCKNOW
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE EAST LUCKNOW
₹80,000
Yes
21 Mar 2023
10 Jan 2023
8 Feb 2023
10 Jan 2023
6 Feb 2023
24 Jan 2023
Amount
S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm including dismantling of existing frame (exc 1 sqm but not exc 2.25 sqm) and up to 02 stroried height and re-fixing the same with holdfast and flat iron with necessary welding/revating fixed with aluminium wire staples including taking down from any section and refixing with new wire mesh with tinned tack/by welding/bolting/beading etc complete all as specified and directed.
S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm including dismantling of existing frame (not exc 1 sqm) and up to 02 stroried height and re-fixing the same with holdfast and flat iron with necessary welding/revating fixed with aluminium wire staples including taking down from any section and refixing with new wire mesh with tinned tack/by welding/bolting/beading etc complete all as specified and directed.
S&F for mild steel framed work as in doors/window flat iron or gates of angle or other section drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and stainless steel hings, Fe-410W (Gde-E-250) quality-A, including dismantling of old complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.50 sqm each and removing from site, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exc 4 sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description area not exc 1.00 sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description exc area 1.00 sqm but not exc 2.00 sqm each complete all as specified and directed.
M&L for plain cement concrete cast in situ Type B-1, 1:2:4 (20 mm graded stone aggregate) as in copings, hold fast, back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work complete all as specified and directed.
S&F of mild steel hold fasts, supports or stays for rainwater, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe -290 mode E-165 complete all as specified and directed.
S&F for 30mm thick factory made flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides, complete all as specified and directed.
S&F for 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in section 8, clause 8.24 (a) of SSR 2009 Part-I and supplied and fitted to chowkats complete all as specified and directed.
S&F for factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement in the frame complete all as specified and directed.
S&F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed and welded, complete all as specified and directed.
S&F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed and welded, complete all as specified and directed.
S&F for steel ventilator with top hung shutter including box type hinges, peg stay and glazing bars complete with dove tailed or welded, complete all as specified & directed.
M&L for 18-19 mm thick block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work and including taling down old items complete all as specified and directed.
M&L for 0.90mm thick decorative laminates 'Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive as per makers instructions.
M&L for 6mm thick external teak wood lipping for block board or veneered particle board, fixed with nails, complete all as specified and directed.
M&L in repair 19/20 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.
S&F in repair of 20-25mm dia CP curtain rods with and including fixing of two Nos MS brackets and decorative type PVC knobs at both ends of curtain rod complete all as specified and directed.
S&F 150mm size stainless steel, fancy type handle fixed with screws complete all as specified and directed.
S&F magnet catcher for cup board shutter fixed with screws complete all as specified and directed.
M&L 2nd class hard wood, wooden beading, plain fillets, square or rectangular or triangular in section clean sawn sectional area exc 3 sqcm but not exc 6 sqcm fixed with nail complete all as specified and directed.
M&L 2nd class hard wood, plain fillets, square or rectangular or triangular in section clean sawn sectional area not exc 3 sqcm fixed with nail, complete all as specified and directed.
S&F of 100 mm size butt hinges, medium weight, stainless steel, complete all as specified and directed.
S&F in repair 100 mm size butt hinges, medium weight, stainless steel, complete all as specified and directed.
S&F in repair 150mm long aluminium handles cast type, anodised, complete all as specified and directed.
S&F of 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F in repair 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F of aluminium alloy, anodized, sliding door bolt, 300mm long, with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F in repair aluminium alloy, anodized, sliding door bolt, 300mm long, with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F for 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed. (Note:- Fixed as in existing iron /wooden frame in own arrangement).
S&F of 125 mm size hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F in repair 125 mm size hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
Hacking out old brokon glass (any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.
S&F of 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.
S&F in repair of 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.
S&F of 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane, complete all as specified and directed.
S&F of stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with aluminium wire staples, complete all as specified and directed.
S&F in repair for stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with aluminium wire staples, complete all as specified and directed.
S&F for 140mm long floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.
M&L for prepration of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth complete all as specified and directed.
M&L for preparation of new steel or iron surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces of any description over 10 cm width or girth, not otherwise described, complete all as specified and directed.
Demolition of brick work built in cement mortar including all of quoins, arches, pillars etc. but excluding ashlar facings and precast concrete articles complete all as specified and directed.
M&L for brick work using non-modular old size fly ash brick conforming to IS-12894:2002, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) , complete all as specified and directed.
All as per item No 47 but except bricks.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:4, finished surface even and fair with out using extra cement, complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work in CM (1:6) surface finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 5mm thick in CM 1:3 as in ceiling, soffits of slab and finish the surface even and smooth without using extra cement complete all as specified and directed.
M&L for three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper on wall surface, complete all as specified and directed.
M&L for preparation of newly wall surfaces and applying two coats of cement base paint and over one coat of primer complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for joint less non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc, laid over and including 15mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for glazed ceramic coloured tiles (joint free) of size 300x600x 8mm to 10mm thick over and including 10mm thick plaster in CM 1:3 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and drected.
Demolition of cement concrete in ground floors and pavings not exe 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 40mm thick cement concrete 1:2:4, type B-1 (using 20mm graded aggregate) as in floors, surface finished even & smooth using extra cement complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tank and from mouth of circulating pipe etc of capacity exc 250 not exc 500 ltrs of tanks complete all as specified and directed.
S&F for 500 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia PVC float valve and including dismantling of existing tank, complete all as specified and directed.
S&F in repair 20mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.
S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe of 20 mm bore complete all as specified and directed.
S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed.
S&F steel water GI tubing 15mm dia medium grade, with all fittings complete to walls and ceilings or laid in floors including taking down of existing GI/PVC pipe complete all as specified and directed.
S&F steel water GI tubing 20mm dia medium grade, with all fittings complete to walls and ceilings or laid in floors including taking down of existing GI/PVC pipe and connected to existing tank up to 2 storied height complete all as specified and directed.
Cutting chases pining in brick, concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortor 1:3 to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cutting not exc 10 cm girth complete all as specified and directed.
S&F in repair viterous china wash hand basin white flat black type of size 550x400mm including cutting for and pinning in ends of brackets and fixing in walls including 32mm dia chromium plated waste fittings/coupling, PVC waste pipe MS brackets complete all as specified and directed.
S&F in repair 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm dia long body bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle sc-rewed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair 15mm bore angle valve/stop valve chromium plated fancy type cast copper alloy screwed down high pressure, crutch or butterfly handle, screwed both end for pipe or for unions complete all as specified and directed.
S&F in repair 15mm dia spindle for bib taps, angle valve and pillar taps as required or as per sample approved complete all as specified and directed. (Note:- Including taking down existing spindle carefully and fixed the same in position).
S&F in repair stop valves, 15mm dia, cast copper alloy, CP fancy type with long shank and cup (concealed type) screwd down, high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions complete all as specified and directed.
S&F in repair 10 Ltrs capacity, PVC valveless, syphonic action type, ISI Marked, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.
S&F in repair kitchen sink with drainage board made of stainless steel 0.80 mm thick with plug washer and waste including bedding in cement mortar including fixing cantilever bracket and connecting union to pipe overall size 915 X 460 mm bowl size 410 X 330 X 160 mm complete all as specified and directed.
S&F in repair viterous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white fixed in repair including connection to trap and cistern, flush pipe and making good disturbed surface of floor complete all as specified and directed.
S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottom & cover and aluminum anodised hinging device complete all as specified and directed.
S&F in repair 32 mm bore Low density PVC flexible pipe for wash hand basin/sink etc complete all as specified and directed.
S&F in repair CP shower rose with arms 15mm dia complete all as specified and directed.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F in repair 32mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement complete all as specified and directed.
S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including joint-ing with solvent cement complete all as specified and directed.
S&F in repair 100mm dia CP grating with waste pipe hole complete all as specified and directed.
S&F in repair sheet glass shelf assembly consisting of 5.5 thick sheet glass shelf 12cm wide with CP bracket gaurd & railing 60cm long complete all as specified and directed.
S&F in repair brass chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F in repair 15mm dia two way bib taps, cast copper alloy chromium plated fancy type handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair health faucet with 1.00 mtr long flexible tube including wall hook complete all as specified and directed.
M/S RAJ INTERIORS
R K CONTRACTOR AND SUPPLIERS
JITENDRA SINGH
ANIL CONSTRUCTION
Spectrum Enterprises
QUALITY CONSTRUCTIONS CO
m/s raghubar dayal
M/s Sachkhand Traders
PARAMOUNT ENGINEERS
M/S Reliance Construction
M/S SWATI CONSTRUCTION
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .