REPAIR MAINT OF CEILING FAN GEYSER, ROs DESERTS COOLERS AT DHAR ROAD JINDRAH SAMNABANJ BATTAL RC PEAK AND REPAIR REWIRING OF INTERNAL ELECTRIFICATION AT SAMNABANJ RC PEAK AND BATTAL OTM ACCN UNDER GE ARMY DHAR ROAD

Amount

Supply and fix as in repair Capacitor 4 Mfd complete all as specified and directed by Engineer-in-charge.

Supply and fix as in repair wood wool Cooler Pad set of Three of existing size having wt of 500 gms each set complete all as specified and directed by Engineer-in-charge.

Supply and fix as in repair MS Front Show grill as per exisitng size at site complete all as specified and directed by Engineer-in-charge.

Supply and fix as in repair PVC Pipe 1/2 " with Elbow plastic as per exisiting length set of three complete all as specified and directed by Engineer-in-charge.

supply and fix as in repair Wooden ply of size 6mm thick and sheet size 3’x6’ water proof for desert cooler fixing of desert cooler/window AC complete all as specified and directed by Engineer-in-charge.

Supply and fix as in repair Blades for Cooler motor fan as per existing size and make complete all as specified and directed by Engineer-in-charge.

Disconnecting the mains and Taking out the existing unserviceable cooler fan motor and supply, fixing and testing new cooler fan motor as exiting capacity single phase 240 volts of existing make including reconneting the electric mains and testing complete all as specified and directed by the Engr-in-charge.

Disconnecting the mains and Taking out the existing unserviceable cooler Water lifitng pump submersible and supply, fixing and testing new cooler Water lifting pump heavy duty single phase 240 volts of existing make including reconneting the electric mains and testing complete all as specified and directed by the Engr-in-charge.

Taking down old unserviceable or rusted MS Side panels repalce it by new MS Side panel set of three for desert cooler as exisiting size at site Inclusing wood wool pad set for D/cooler off size each set complete all as specified and directed by Engr-in-Charge.

Disconnecting and taking down and opening the ceiling fan of size 1200/1400 mm sweep carefully dismantling complete for servicing by cleaning the bearing/bush by cleaining solution and replacing the split pin and unserviceable items like bearing, bushes, rubber real, condenser, flexible cable, canopy, etc., assembling Ceiling fan and refixing in the original place connection and testing complete all well complete all as specified and directed by Engineer-in-Charge. Note;- Replacement of unserviceable items will be measured and paid under relevant items.

Supply and Fixing of ball bearing of existing size for 1200/1400 mm sweep complete all as per installed shape and size.

Supply and Fixing of gun metal bushes of existing size & make for 1200/1400 mm sweep ceiling fan complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing of condenser 2.5/3 Mfd for ceiling fan/exhaust fan complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing of canopy of existing size & make for 1200/1400 mm Sweep ceiling fan complete all as specified and directed by Engineer-in-Charge.

Supply and fix as in repair of ceiling fan clamp assembly complete with nut, bolt, washer, u clamp and rubber reel etc of existing size & suitable for 1200/1400mm sweep ceiling fan complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing of PVC 3 core Cord Flexible copper insulated cable 24/0.2mm size Black/Grey colour complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking down the Exhaust fan & wall mounted fan/Air circulator of size 300/380/450 mm sweep carefully dismantling complete for servicing by cleaning the bearing/bush by cleaining solution and replacing the unserviceable items like bearing, condenser, flexible cable, etc., assembling Exhaust fan and refixing in the original place connection and testing complete all as specified and directed by Engineer-in-Charge. Note;- Replacement of unserviceable items will be measured and paid under relevant items saparately.

S&F Exhaust fan AC single phase 230 volts for size 300 mm sweep, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as spd and directed inluding removing and dismentaling and given as sch of credit to contractor

Supply and Fixing ball bearing and Bush of existing size for Exhaust fan/wall mounted fan 300 /380/450 mm sweep complete all as specified

Material and labour for Collecting the burnt ceiling fans including blades of any make from AGE E/M store yard/ site taking out to reputed work shop dismantling removing the burnt winding and rewinding of ceiling fan 1200 mm sweep with super enameled copper conduct winding wire of same gauge and wight insulating, varnishing, baking, including wornout bearing/bush greasing assembling and transporting the same and fixing and testing at site complete all as specified and directed by Engineer-in-Charge.

Material and labour for Collecting the burnt ceiling fans including blades of any make from AGE E/M store yard/ site taking out to reputed work shop dismantling removing the burnt winding and rewinding of ceiling fan 1400 mm sweep with super enameled copper conduct winding wire of same gauge and weight insulating, varnishing, baking, including wornout bearing/bush greasing assembling and transporting the same and fixing and testing at site complete all as specified and directed by Engineer-in-Charge.

S&F Ceiling Fan AC single phase 230 volts for size 1200 mm sweep, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as spd and directed. inluding removing and dismentaling of old UNSV fan any type and size and and given as sch of credit to contractor

Material and labour for Collecting the burnt Exhaust fans including blades of any make from AGE E/M store yard/ site taking out to reputed work shop dismantling removing the burnt winding and rewinding of Exhaust Fan/wall mounted fan of size 280/300mm sweep complete with super enameled copper conduct winding wire of same gauge and wight insulating, varnishing, baking, including wornout bearing/bush greasing assembling and transporting the same and fixing and testing at site complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparing the faded surfaces of ceiling fan size 1200/1400 mm sweep with soap/ soda, painting with DUCO paint of approved tint by one coat of spray painting as specified and directed by EIC.

S&F Exhaust fan AC single phase 230 volts for size 450 mm sweep, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as spd and directed. inluding removing and dismentaling of old UNSV ex fan any type and size and given as sch of credit to contractor

Material and labour for Collecting the burnt Exhaust fans including blades of any make from AGE E/M store yard/ site taking out to reputed work shop dismantling removing the burnt winding and rewinding of Exhaust Fan/wall mounted fan/aircirculator of size 450 mm sweep complete with super enameled copper conduct winding wire of same gauge and wight insulating, varnishing, baking, including wornout bearing/bush greasing assembling and transporting the same and fixing and testing at site complete all as specified and directed by Engineer-in-Charge.

Material and labour for disconnecting from the electric mains and Taking down opening and inspection of storage type water heater of size 25ltrs/50 Ltrs capacity and descaling with dilute hydrochloric acid, checking for water tightness of the inner tank, cable continuity, thermostat of setting at 70 degree C checking fusible plug, base assembly, stop cock including replacement of indicator lamp, rubber PVC gasket washers reassembling, refixing and reconnection the electric connections at old place and replacing unserviceable bolts and nuts, cementing work including hydraulic pressure testing with hard operated hydraulic pump complete after repair including spray painting of one coat with DUCO paint of approved in after preparation of surface. Note : (a) Replacement of unserviceable items like heating element, Indicator lamps, thermostat, stop cock, PVC Hot and cold pipes will be measured & paid separately as supply only. (b) Labour charges for replacing the unsv spares, disconnection and reconnection of water and electric connections shall be deemed to be included in unit rate quoted for this items .

Supply and fix as in repair Heating element (round/ triangular) including rubber washer/PVC gasket of the following size 1.5KW of existing type & make complete all as specified and directed by Engr-in-Charge..

Supply and fix as in repair Thermostat for geyser of capacity upto 50 ltrs capacity of existing type & make complete all as specified and directed by Engr-in-Charge..

Supply & fix Electric Storage water heater of capacity 25 Ltr , 230 V energy efficient complete all as specified and directed by Engineer-in-charge. Including fast nut, bolt, washe complete and removing and dismentaling of old UNSV electric storage water heater any type and size and given as sch of credit to contractor

Supply and fix as in repair Rubber Gasket for Inner Tank of capacity upto 25 Ltrs of existing type & make complete all as specified and directed by Engr-in-Charge..

Supply and fix as in repair Air release Valve for 25/50 Ltrs capacity of existing type & make complete all as specified and directed by Engr-in-Charge..

Removing of Old leakage geyser tank and supply and fixing of 25 ltr storage water heater tank as per existing shape and type complete all as specified and directed by Engr-in-Charge..

Removing of Old leakage geyser tank and supply and fixing of 50 ltr storage water heater tank as per existing shape and type complete all as specified and directed by Engr-in-Charge..

Supply and fix as in repair safety valve of existing type and complete all as specified and directed by Engr-in-Charge.

Supply and fix as in repair CP Stop Valve 15mm dia of existing type complete and make all as specified and directed by EIC.

Supply & fix Electric Storage water heater of capacity 50 Ltr , 230 V energy efficient complete all as specified and directed by Engineer-in-charge. Inluding fast nut, bolt, washe complete and removing and dismentaling of old UNSV electric storage water heater any type and given as sch of credit to contractor

Material and Labour for Disconnecting from mains and Dismantling the unserviceable gyeser base assembly (syphon system) and replacing the new base assembly of existing size & make with rubber gasket for 25 Ltrs capacity (6/8 hole) all as spd and directed by EIC.

Material and Labour for Disconnecting from mains and Dismantling the unserviceable gyeser base assembly (syphon system) and replacing the new base assembly of existing size & make with rubber gasket for 50 Ltrs capacity (6/8 hole) all as spd and directed by EIC.

Supply and fix as in repair Indicator Lamps for Geyser of capacity 25/50 Ltr existing type complete all as specified and directed by Engr-in-Charge..

Supply and fix as in repair PVC connections 15 mm size with PTMT nuts of up to length 600 mm length (for hot and cold water inlet and outlet ) complete all as specified and directed by Engr-in-Charge.

supply and and fix as in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/GI pipe 25 mm dia all as specified and directed

supply and fix as in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/GI pipe 20 mm dia all as specified and directed

Supply and fix as in repair hot water GI pipe duly insulated with glass wool and aluminium cladding 25 mm bore incl connection with solar water heater to tape point and fixing with MS clamp nut bolt etc complete all as spd and directed by EIC.

Supply and fix as in repair hot water GI pipe duly insulated with glass wool and aluminium cladding 20 mm bore incl connection with solar water heater to tape point and fixing with MS clamp nut bolt etc complete all as spd and directed by EIC.

Repairing of Solar Water heating system (Tubelor rod collector) based on direct transfering of heat thermosyphon cirulation, non pressurised system of capacity 500 LPD with suitable electric backup including accessories complete all as specified and directed

Repairing of Solar Water heating system (Tubelor rod collector) based on direct transfering of heat thermosyphon cirulation, non pressurised system of capacity 100 to 200 LPD with suitable electric backup including accessories complete all as specified and directed

Replaement of Tubelor rod collector based on direct transfering of heat for 100 to 200 LPD solar water heater as per existing shape and size complete all as specified and directed

Replaement of Tubelor rod collector based on direct transfering of heat for 500 LPD solar water heater (ETC) as per existing shape and size complete all as specified and directed

Supply and fix as in repair repair of washer (exterior/interior type) of Solar water heating system complete as per existing shape and size.

Replacement of Thermostate for 100 to 500 LPD solar water heater 2000 watt, 35 to 75 deg C, 230 volt single phase complete all as specified and directed

Supply and fix as in repair of solar water heating element with thermostat 3 KW incl electric connections complete all as specified and directed by Engr-In-charge

S&F as in repair moulded polethylene water storage tanks, three layered, ISI marked (cylindrical vertical with threaded lid) hoisted and fixed in position of capacity 1000 ltr complete all as spd and directed by EIC.

S&F wall fan single phase 230 volts for size 400 mm sweep, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as spd and directed. inluding removing and dismentaling of old UNSV wall fan any type and size and and given as sch of credit to contractor

Supply and fix as in repair Heating element (round/ triangular) including rubber washer/PVC gasket of the following size 2 KW of existing type & make complete all as specified and directed by Engr-in-Charge..

Supply and fix as in repair of ceiling fan down rod GI pipe of 15 mm bore, duly arrangement of hole and cutting of pipe etc of size 30 cm long complete all as spd and directed.

Supply and fix as in repair of ceiling fan down rod GI pipe of 60 mm bore, duly arrangement of hole and cutting of pipe etc of size 30 cm long complete all as spd and directed.

S&F Exhaust fan AC single phase 230 volts for size 200 mm sweep Plastic body along with louvers, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as spd and directed. inluding removing and dismentaling of old UNSV ex fan any type and size and taken in sch of credit.

Supply and fix as in repair of ceiling fan iron louver for size 300 mm dia exhaust fan of shape (round/square) as directed by EIC ceiling fan down rod GI pipe of 60 mm bore, duly arrangement of hole and cutting of pipe etc of size 30 cm long complete all as spd and directed.

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring aluminium/ copper from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets,bell push , ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

M & L for concealed point wiring on wall and ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following:-

One light /Fan/Bell point controlled by one switch 6/5 Amp one way single pole.

One 3 pin socket outlet 6/5 Amps controlled by one switch on the same board with other switches.

One 3 pin 6/5 Amp socket outlet controlled by one switch independent board.

One 3 pin 6/5 Amp socket outlet controlled by one switch independent board but below/ side the switch board of light point in same vertical / horzintal plane.

All as per item No 2 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

Taking down old unserviceable/deteriorated point wiring aluminium/ copper (excluding PVC conduit) from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets,bell push , ceiling rose, pendants, Holders sunken box, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

M&L for drawing the wire in existing conduit steel/PVC, concealed / surface ,complete with point wiring with FR PVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm, 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly in and sunken terminal boxes pressed MS/GI steel terminal boxes not less than 1.20 mm thick for mounting switch, socket etc including 3 mm thick Hylam brand sunmica laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed surface with cement mortar ratio of 1:3 and matching surface with existing white/colour wash, oil bound or cement base paint etc to match with existing surface complete all as specified and directed and suitable for the following: -

one light, fan, call bell point controlled by one switch

-Ditto- all as per item No 5 here-in-before but For one socket point 6 Amps controlled by one switch on same board

-Ditto- all as per item No 5 here-in-before but for 5 Amp independent socket point controlled by one switch

One 3 pin 6/5 Amp socket outlet controlled by one switch independent board but below/ side the switch board of light point in same vertical / horzintal plane.

All as per item No 5 here-in-before but in exsiting concealed/surface PVC conduit for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

S&F as replacement Angle lamp /batten holder fixed on wall /ceiling all as approved and directed by Engineer-in-charge.

S&F in replacement of old bulk head fitting by exterior application IP 66 protection bulk head fitting LED 10 watt alongwith housing LED Panel/Lamp weather proof outdoor type alongwith covered with transparent clear sheet all as specified and directed.

S&F Wall mounted LED batten 20 Watt with 01 No LED tube rod (White/Yellow), extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver including dismantling taking down unsv FTL fitting any type complete all as specified and directed.

S&F Wall mounted LED light fitting mirror type, 10 Watt 220V decorative type White/Yellow incl integrated electronic driver and connecting up with three core flexible copper conductor including dismantling taking down unsv sketch fitting any type complete all as specified and directed.

S&F LED building security light 35 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade suitable size dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismentling taking down unsv fitting any type all as specified and directed.

Supply & Fixing as replacement medium step type fan regulator 80 Watt, 240 Volt AC, socket size, medium step" ISI marked complete all as specified and directed.

S&F as replacement Ding dong sound door call bell electric AC 240 volt, 50 Hz ding dong type including taking down unserviceable complete all as specified and as directed.

S&F as replacement ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified and as directed.

S&F as replacement switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified and as directed.

S&F as replacement switch piano flush type (ISI marked), single pole, one way 16/15 Amps, 240 Volts including complete all as specified and as directed.

S&F as replacement socket outlet 3 pin, 6 Amp piano flush type including complete all as specified and as directed.

S&F as replacement socket outlet, 2 in 1, 3/5 pin 6 / 16 Amp, piano flush type complete all as specified and as directed

S&F as replacement bell push 5/6 Amps SP flush type complete all as specified and as directed.

M & L for sub main wiring in replacement of worn out aluminium conductor wire with two run of FR PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 Sqmm, 1100 Volts grade and one run of 4.00 Sqmm FR PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments and drawing in PVC rigid conduit , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing complete in all respect all as specified and directed. Note :- 1. Two run of single core cable with one run of contineous earth wire of copper conductor wire Flexible (Multistrand) of FR PVC insulated shall be measured and paid as one unit length. 2. PVC conduit pipe with fitting shall be measured and paid separately .

M & L for sub main wiring in replacement of worn out aluminium/Copper conductor wire with two run of FR PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 Sqmm, 1100 Volts grade from Main Board to Energy Meter drawing in PVC conduit , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing complete in all respect all as specified and directed. Note :- 1. Two run of single core cable of copper conductor wire Flexible (Multistrand) of FR PVC insulated along with PVC flexible tube deemded to be included as one unit length.

M & L for sub main wiring in replacement of worn out aluminium conductor wire with two run of FR PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 4.0 Sqmm, 1100 Volts grade and one run of 2.5 Sqmm FR PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments and including draw in PVC rigid conduit 25 mm dia , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing colour (distumber, Oil bound, Samosem etc ) complete in all respect all as specified and directed. Note :- 1. Two run of single core cable with one run of contineous earth wire of copper conductor wire flexible (Multistrand) of FR PVC insulated shall be measured and paid as one unit length 2. PVC conduit pipe with fitting shall be measured and paid separately .

S & F service connection with twin core 10 Sqmm 240 volt heavy duty un armured PVC insulated solid aluminium conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than one metre apart including 4mm GI supporting wire of suitable size in replacement of old unseriveable conductor cable complete.

S & F service connection with twin core 6 Sqmm 240 volt heavy duty un armured PVC insulated solid aluminium conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than one metre apart including 4mm GI supporting wire of suitable size in replacement of old unseriveable conductor cable complete.

Supply and fixing as in repair Metal clad socket outlet with single pole and nuetral enclosure with two pin and earth plug socket complete with one single pole MCB 20 Amps complete all as specified and directed by EIC.

Supply & Fixing in replacement of DB by SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way complete all as specified and directed.

Supply & Fixing in replacement of DB by SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way complete all as specified and directed.

Supply & Fixing in replacement of DB by SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 12 way complete all as specified and directed.

Supply & Fixing in replacement of DB by TPN Distribution Box 4 way double door of protection grade IP 43 fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of way, confirming to IS 13032 & 8623 including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed.

supply and fixing as replacement of MCCB 125 Amps 16 KA with fixed thermal magnetic release frame 4pole all as specified and directed.

supply and fixing as replacement of MCCB 100 Amps 16 KA with fixed thermal magnetic release frame F2 optim 1.0 , 4pole all as specified and directed.

Supply & Fixing as replacement MCB SPN, 5 to 40 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

Supply & Fixing as replacement MCB SP, 06 to 40 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked complete all as specified and directed.

Supply only MCB TPN, 63 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and complete all as specified and directed.

Supply and fix as in replacemtn of 3 Pin Plug Top 16A, White/Black 240V|3 Pin Top complete all as spd and directed.

Supply and Fix LED lamp 10 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismentling taking out unsv CFL/LED Bulb

PVC insulated, PVC sheathed twin flat core 1100 volts grade, 4 sqmm aluminium conductor from OH conductor or from junction box to street/security light incl taking down old unserviceable cable all as specified and directed.

S&F LED building security light 35 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade suitable size dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismentling taking down unsv fitting any type all as specified and directed.

M&L for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).

S&F in replacement of old bulk head fitting by exterior application IP 66 protection bulk head fitting LED 10 watt alongwith housing LED Panel/Lamp weather proof outdoor type alongwith covered with transparent clear sheet all as specified and directed.

K S BUILDERS