Construction of proposed Addl. Filtration Unit and Supply System for Hospital and Hostels at Jorhat Medical College and Hospital, Jorhat under TNEIF for the year 2018-19.

Amount

Preparation of site for placement of the drilling rig including excavation of mud pit. Circulation drain. Collection chamber etc. all complete as directed

Movement of Rig to the drilling site including cost of P.O.L. all complete as directed.

Transportation of all ancillary equiptments, camp materials, welding set. Rig accessories etc. including cost of P.O.L. all complete as directed. (a) For less than 100.00 Km

Transportation of all store materials like pipes, strainer, cone, socket, clamp, bentonite etc. including cost of P.O.L. all complete as directed. (a) For less than 100.00 Km

Transportation of air compreassor of Kirloskar make 540 CFM. 10.5 Kg/Sq Cm with all accessories bentonite etc. including cost of P.O.L. all complete as directed. (a) For less than 100.00 Km

Transportation of P.O.L. all complete as directed. Considering 10.00lits/m/ of depth of the well

Construction of temporary accommodation and low cost sanitary facility for drilling staff including cost of camp materials viz. cots, tables, chairs, utensil, dress, safety helmets etc. and dismantling the accommodation after copletion of the work all complete as directed

Providing water supply facilities at drilling site all complete as directed. (a) By installing 1 no. of Singur Hand Pump

(b) By installotion 1 No. HP dewatering pump

Boring in soft / normal clay/sandy soil by bit of size either 55/8// or 67/8// or 77/8// and collecting sample of soil at every 3.0 m depth or wherever there is a change of strata in sample boxes with the distinguishing marks including arranging and carriage of necessary boring materials / tools etc. and withdrawing the drill pipe for lowering wall assemble etc. all complete as directed.

Boring in hard soil / pebbles/gravel by bit of size either 55/8// or 6/7/8// and collecting smaple of soil at every 3.0 m depth or wherever there is a change of sttata in sample boxeds with the distinguishing marks including arranging and carring of necessary boring materials/tools etc. all complete as directed.

Reboring in soft soil / normal elay / sandy soil by bit of size either 8 1/2// or 9 5/8// or 12// from either 5 5/8// or 6 7/8// all complete as directed

Reboring in hard soil / pebble / gravel by but or size either 8 1/2// or 9 5/8// or 12// from either 5 5/8// or 6 7/8// or 7 7/8// al complete as directed

Reboring in soft soil / normal clay / sandy soil by bit of size either 14// or 16// or 18// from either 8 1/2// or 9 5/8// or 12// all complete as directed

Reboring in hard soil / pebble / gravel by bit of size either 14// or 16// or 18// from either 8 1/2// or 9 5/8// or 12// al complete as directed

Extraction of drill pipes / bits against skin friction at the end of each day and after completion of the operation including washing of the bopre hole all complete as directed

Labour charge for sinking lowering, fitting , fixing in position of 100 mm dia UPVC pipe assemble comprising of strainer, pipes and cone in portable water bearing strata, washing the bore well et. And suppling necessary jointing materials including carriage of materials and cleaning and priming the tube well all complete as directed. Up to depth of 50.00 m

For 50.00 m to 100.00 m depth

Beyong depth of 100.00 m

Developing of the D.T.W. with air compressinr, make-Kirloskar/Cummins and 10.50 Kg.Sq. Cm capacity all complete as directed

Supplying and packnig pea gravel around the periphery of casing including local carriage screening, washing etc. all complete as directed.

Supplying , fitting, fixing M.S. Clamp of size 15 mm thick and 150 mm width having projection of 300 mm and three holes of 20 mm dial. For clamping the plates by 16 m dial hezagonal bolts of length 75 mm and nuts of both sides encircling the column pipe including two coats of enamel paints over one priming of different dial all complete as directed and specified. (b) 150 mm dia

Fabrication and supplying of M.S. Cone of 150 mm dia x 1.00 m long made out of 100 mm dia x8 mm thick M.S. pipe by cutting and welding at one end all complete as reqd. as directed.

Fabrication and supplying of detachable M.S. Well Cap of for fitting at the top of the deep tube well made out with 150mm dia G.I. Socket of approved brand including cutting and welding with fitting, fixing hinge at one end and shapes & staple at the other end and covered with M.S. Plate 4 mm thick etc. all complete as required as directed.

Supplying and fitting of 150mm dia UPVC pipes for installation of Deep tubewell by rotary rig.

Supplying and fitting of 150 mm dia UPVC Ribbed Screen Pipe for installation of Deep tubewell by rotary rig.

Earth work excavation for retaining walls, footings of columns steos & septic tank etc. including refilling the qnty as necy after construction of work breaking clods in return filling , dressing, watering & ramming etc & removal of surplus earth with all lead & lift as directed & specified in flowing classification of soils including bailing out water where necy. as directed & specified. 1) Up to a depth of 2m below the existing G.L. (a) In ordinary soil.

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed. (b) ITC / NEZONE / Bansal/Jindal (Medium) a) 80 mm dia

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

(B) Extra over item no. 1.1(A) above for each 1m depth or parts thereof beyond the initial depth of 2m

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL. (i) TMT Corrosion resistant steel (CRS) reiforcement bar

c) ISI approved Mild steel reinforcement bar(M.S.Bar)

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank

Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face. (ii) Using 25mm thick plank

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. (ii) Using 25mm thick plank

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. (ii) Using 25mm thick plank

Vertical surface such as walls (any thickness), parapet walls, partitions, walls of septic tank, inspection pit and the like including attached pilasters, butresses, plinth and string courses and the like. (ii) Using 25mm thick plank

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank)

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine, (A) In substructure up to plinth level, Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser a) M20 grade concrete or prop 1:1:5:3

b) M 15 Grade concrete or prop 1:2:4

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary. (b) In proportion 1:4.

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. B) On fair side, a) In cement mortar 1:3

A) On rough side. (b) In cement mortar 1:4

Extra for providing and mixing water proofing plasticizer plastocrete plus of sika india. (A) In concrete of prop (ii) 1:1:5:3

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. (II) Ornamental grill, ( C ) Fixed to brick work / PCC/RCC

Making and Supplying of UPVC perforated laterals of 40mm dia and 60 cm long by making hole of 5mm dia at a spacing of 8 cm centre to centre in two lines at 60 d with the centre of the pipe and threading at both ends and supplying, fitting and fixing 40mm dia U.P.V.C. threading End Plug at one end, the other end in a 40mm dia UPVC threading nipple of 75mm long properly embedded in RCC cover slab all complete as directed. (a) 100mm thick

Making and supplying of perforated larerals made of UPVC plumbing pipe 40mm dia and 60cm qlong by making hole of 5mm dia at a spacing of 8cm centre centre in two lines at 60 degree with the centre of the pipe and threading at both ends and supplying, fitting and fixing 40mm dia UPVC threaded End Plug at one end, the othre end in a 40mm dia UPVC threaded Equal Tee and properly embedded the same on the RCC cover slab fotted with a UPVC barrel nipple of 75 mm long all complete as directed.

Supplying filter gravel of uniform size and shape without flexy shape free from dust,clay,soft grains, dirt and other foreign materials, washed and screened to different sizeds as given below as per IS 8419 (Part -1) : 1977 all complete as directed. (a) 2 mm to 6 mm

(b) 7 mm to 12 mm

( C) 13 mm to 25 mm

(d) 25 mm to 32 mm

(e) 33 mm to 40 mm

Supplying filter sand of hard and resistant quartz, uniform size and shape free from dust, clay,soft grains, dirt and other forign materials including inorganic salt and organic substance, washed and screened, having uniformity coefficient between 1.3 to 1.7, effective size between 0.45 to 0.70 mm ignition loss not exceeding 0.7% by weight, soluble fraction in Hydrocholoric Acid not exceeding by .5% by weight, silica content not less than 905, specific gravity between 2.55 to 2.65 wearing loss less than 3% as per IS:1419(Part-I) : 1977 all complete as directed.

Supplying, carrying and placing in position cast iron flanged spigot/Tail poece as per IS 1538 in line and level all complete as directed. (a) 150 mm dia

Supplying, carrying and placing in position cast iron Double flanged 90 degree Bend as per IS 1538 in line and level all complete as directed. (a) 150 mm dia

Supplying, carrying and placing in position cast iron all flanged equal Tee piece as per IS 1538 in line and level all complete as directed. (a) 150 mm dia

Supplying, carrying and placing in position cast iron all Double Flanged Tapper as per IS 1538 in line and level all complete as directed. (a) 150 mm dia

Supplying, carrying and placing in position cast iron all Double Flanged sluice valve (with wheel & cap) of 150 mm dia as per IS 780 having length over flanges 280mm and height of top of hand wheel from center to the water way 595 mm and having weight 70kg excluding wheel or cap in line and level all complete as directed.

Supplying, carrying and placing in position cast iron double flanged sluice valve (with wheel & cap) of 100mm dia as per IS having length over flanges 255 mm and height of top of hand wheel from centre to the water way 470 mm and having weight 43kg excluding wheel or cap in line and level all complete as directed.

Supplying and placing 6mm thick rubber insertion sheet in between the joints and fitting fixing within 5/8 x 4 long nuts and bolts with washer 2mm thick in each joints as directed and specified

Labour Charge for making hole by chijelling on the RCC / Brick Wall of the treatment plant according to thesize of collar including making good the wall by cement concreting and plastering etc after fitting of the CI collar to the required Back Wash Line

Supplying , carrying and placing in position cast iron flanged pipes vertically cast Class B as per IS 1537 in line and level all complete as directed.

Poviding soling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary. (b) In proportion 1:5.

10 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arising, internal rounded angle, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering of necessary, complete as directed and specified (measurement to be taken in the face area timbered) (a) Upto a depth of 1.5 metre

(b) Above 1.5 m upto 3.00 m depth

(c) Above 3.00 m upto 4.50 m depth

(d) Above 4.50 m upto 6.00 m depth

Providing and laying plain/reinforcement cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforcement cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine, i) Walls (thickness not less then 100mm) including attached pillaster, buttresses, plinth and string course etc. b) M20 grade concrete or prop 1:1:5:3

Extra for using plastering in concrete if admixture, plaster etc are not including in the item rate. b) M20 grade concrete or prop 1:1:5:3

65 mm thick Cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement:3coarse sand : 6 coarse aggregate of 25mm and down) and 15mm thick wearing layer in cement concrete in prop 1:1:2 (1Cement : 1coarse sand : 2 coarse aggregate of size 10mm down ) llaid in panels and finished with a floating coat of neat ceent finish (using cement slurry for bond @ 2.75 kg. per square meter of floor area) including curing etc. complete as directed.

15mm thick Cement plaster in single coat on single or falf brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, no exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side. a) In Cement mortar 1:3

Extra over item no. 6.2.1 to 6.2.3. for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls ) oncludinf curing complete as directed

b) Finishing wall with water proffing cement paint of approved brand and manufacture and of require shad on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials.

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for RCC work / RB walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blacks, supports. chairs, spacers, etc/ complete. (b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg, drain works, retaining wall & boundary wall etc.)

Supply installation and testing and commissioning of CHEMINJECT chemical Feed Pump (Chemical Dozing Pump) of 6 ltr capacity @ 6 Kg/Sqcm complete with PVC solution tank, mixing contrainer & electrical wiring with panel board, fitting & fixing at site with solution and discharge tubing

1st Class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S. rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately ) (A) 112 mm thick brick wall. (a) In cement mortarin prop 1:4

Providing fitting hoisting and fixing of roof trusses including purlins fabrucated using MS circular hollow section cinforming to relevant I.S. code as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zine chromate primer and two coats of approved chamel paints complete including for fixing ceiling joints as per design and ..... b) Using other ISImarked approved circular hollow section

Providing pre painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately). TATA Blue scope / Dyna roof / Durakolor / Wonder Roof or equivalent as directed by the Department. (iii) 0.60mm thick

Providing pre painted Galvanized Iron Sheet Roofing (PPGI) accessories (Ridgs / Vally / Gutter / Flishing ) at all levels including fitting and fixing self drilling , self tapping screws complete. TATA Blue scope / Dyna roof / Durakolor / Wonder Roof or equivalent as directed by the Department. (iii) 0.60mm thick

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought,framed and and fixed in position in contact with C.C. or brick masonry wall includding supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrte block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C. and masnry as directed and specified. (b) With 1st class timber (Bonsum/Sundi)

Providing, fitting and fixing full panelled doors/ windown including oxidised M.S. butt hinges (10mm x 75mm x 3.55mm) with necessary screws (other fittings to be measured and paid separately) B) With 1st class local wood (Gamari/Hollock/Bonsum)

Providing, fitting and fixing fully glazed windows without intermediatesash bars including oxidised M.S. butt hinges (75mm x 60mmx3.15mm) 2 nos. on each leaf and 3 nos. on single leaf (glass panes to be measured and paid separately) (ii) 40 mm thick

Providing, fitting and fixing fully glazed clerestory clerestory window and fan light including fotting and fixing 2 M.S. pivot hings (75mm x 20mmx3.00mm) eye hook and nylon chaord complete (glass panes shall be measured and paid separately) (ii) 40 mm thick

Providing, fitting and fixing M.S. grill of required pattern for windows/clerestory windows/openengwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or scrows. (II) Ornamental grill, (a) Fixed to wooden frames

Providing and fixing clear sheet beded in putty and fixed with/without woden bedding necessary cutting glass to be required sized (Payment for wooden bead shall be made separately)

Providing barge board of size 200mm x 20mm with 1st class local Hollock/Bonsum timber including fitting and fixing with necessary wood screws etc. complete.

Cement concrete works in topping 1:1:2 (1 Cement : 1 Sand : 2 graded aggregates on RCC floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg. of cement per sq.m. of floor to be laid in panels including curing complete as directed. (a) 15 mm thick

15mm thick Cement Plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises internal rounded angle not exceeding 80 mm girth and finished even and smooth including curing complete as directed. A) On rough side, (b) In Cement mortar 1:4

B) On fair side, (b) In Cement mortar 1:4

Supplying fitting fixing anodised aluminium fitting of appoved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with conter sunk holes for screws including necessary alumium screws etc. complete. (anodised to bright natural matt & sation finished) a) Sliding door bolts i) 300mm x 16mm

b) Tower bolts, (ii) 250mm x 12mm

(iv) 150mm x 10mm

c) Door handles, (iii) 150mm

(d) Shutter book & eye, (iii) 150 mm

Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistoried) cable FR conforming to IS - 694 : 1990 with flexible bright annealed electrilytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kable / Nicco / surface flat 19 mm ISI marked casing 'n' capping (AKG / Precision / Presto Plast Polycab/MW or equivalent make as approved by the Deptt.) system, complete. short point upto 3.00 m length

Long point upto 6.00 m length

wiring to 5 a pin 6 Amps plug point with 1.5 sq.mm PVC insulated single core unsheather industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finoles / RR Kabel/Nicci/Anchor or Equivalent Make as approved by the Deptt.) with flat 19mm ISI marked casing 'n' capping (AKG/Precision/Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) system including earth continuty with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. Short point upto 3.00 m length

Supplying with fitting and fixing sheet steel, phosphatised, powder painted single door surface mounting MCB DB incorporated with bas-bar, Natural link, Earth bar and din rail etc. fitting on wall with grounting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. (a) 4 way SPN single door

Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHER conforming to IS-694:1990 with flexible bright annealed electrilytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kable / Nicco / or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision / Presto Plast Polycab/MW or equivalent make as approved by the Deptt.) including earth continuity. With 2x2.5 sqmm + earth continuity with 1x1.5 sqmm. In surface flat 19 mm casing system

With 2x4 sqmm + earth continuity with 1x2.5sq.mm.in surface flat 19mm ISI marked casing 'n' capping system

Supplying with fitting and fixing of CFL / Fluorescent luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection as approved by the Deptt.) with 1.5 sq mm PVC insulated S.C. copper conductor as required and as directed by the department.

Supplying and fixing of 3 plate Ceiling Rose (Anchor Penta PC CHERRY / Gold medal / Kolor Kanykom.Havells or equivalent make as approved by the Deptt.) on the existing block including connection as approved by the Deptt.) complete as required.

Supplying and fixing of polished Brass Bracket of 18 SWG 25cm long cast back plate and brass lamp holder complete including connection as approved by the Deptt.) as required without lamp

Supplying and fitting of 11/15 watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting / pendent holder etc. as specified and directed by the deptt.

Supply, installation & testing of GI earth station with perforated 50mm dia G.I. Fittings such as Socket, Tee, elbow, nipple and 65mm x50mm G.I. reducting socket fpr funnel including locking arrangement 300mmx300mmx6mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt.

Extra for using salt (5 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 8 SWG Copper earth from Earth Electrode (below G.L.) electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying and fixing of Switch / Socket flush type (Anchor Penta PC CHERRY Gold medal / Kolor kany. Kom / Havells or equivalent make as approved by the Deptt.) on the existing PVC/MS board including connection as approved by the Deptt.) complete as required

Supply and fixing of Switch/Socket flush type (Anchor Penta PC CHERRY / Gold Medal / Kolor kany. Kom / Havells or equvalent make as approved by the Deptt.) on the existing PVC / MS board including connection as approved by the Deptt.) complete as required.

Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like doen rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department (Without regulator ) (ORIENT PSPO make / Usha make / CROMPTION make/ Havells / ATC / V GAURD make)

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Aluminium conductor up ro 10 sq mm balance stranded conductor, XLPE Insulated, annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finoles/RR Kabel / Nicco /Anchor ir Equivalent Make as approved by the Deptt.) in surface flat 19mm ISI marked casing 'n' capping (AKG) / Precision / Presto Plast / Polycab / MW or wquivalent make as approved by the Deptt.) system , complete. 16.00 Sq. mm 4 Core armoured U.G. cable

Supplying with fitting and fixing MCCB income and MCB outgoing sheet steel, phosphatised, powder painted double door IP-43 surface mounting vertical TPN MCB DB incorporated with bas-bar up to 250A, Neutrial link, Earth bar and din rail etc fitted on wall with grounting nuts & bolts as reqd complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG lengrand, Hager make), 4 way TPN (4+12) double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof IP-43 double door surface mounting horizontal per phase Isolation (PP DB incorporated with bas-bar 125 A, Neutral link, earth bar and din rail etc fitting on wall with gtounting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.

Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel / Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC condit (Berlia / AKG / Precision / Presto Plast / Polycab / MW or equivalent make as approved by the Deptt.) including earth continuity in surface / recessed 20 mm. dia 2mm thick / heavy ISI marked IS : 9537 PART - III rigid PVC conduit wiring system. With 2x4sq. Mm + earth continuity with 1x2.5sq.mm cable in 20mm dia 2mm thick / heavy rigid PVC IS : 9537 Part - III conduit

Supply and fixing of 25mm dia 1.50 mm to 2.00 mm average wall thickness heavy rigid PVC IS 9537 Part - III conduct (Berlia / AKG / Precision / Presto Plast / Polycab / MW or equivalent make as approved by the Deptt.) on surface system

Supplying including installation, connection as approved by the Deptt. Testing and commissioning of OPENWELL SUBMERSIBLE PUMP SET complete with submersible cable etc. as directed and specified by the deptt. 10HP three Phase Centrifugal moniblock pump set (Crompton Greaves/Awuatic/CRI/V-Guard make) 2900 rpm A class insulation with Star delta Starter (Cromption Greaves/Control & Switch Gear/BCH/L&T / Siemens make) Fully Automatic citation.

Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.95M X 120MX040M made of 16SWGI1.66m thick C.R. sheet and 40mmX40mmX5mm size angle having having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of Enamel paint. The panel board is to be erected in 1:3:6 PCC foundation including brick soling / grouting etc. complete neatly Wring done with provision for one no 800A 4pole MCCB or Switch Fuse Unit as incomer and provision for 4nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items.

Supplying fitting and fixinng Pipes with all necessary fitting in exposed or in trenches including trenching and refilling the same etc complete as directed. b) ITC / NEZONE / Bansal/Jindal (Medium). (a) 100 mm dia

Installation and Fitting & fixing of 2 nos. of Submersible Raw water pump set of 5 H.P capacity each. [Rate should be quoted above/below in percentage basis/As per. For example: If one quotes rate 10% above, then the rate will be 1.1 and if one quotes rate 10% below, then the rate will be 0.9 & for'As per', the rate will be 1]

Installation and Fitting & fixing of Clear Water water pump set of 10 H.P capacity. [Rate should be quoted above/below in percentage basis/As per. For example: If one quotes rate 10% above, then the rate will be 1.1 and if one quotes rate 10% below, then the rate will be 0.9 & for'As per', the rate will be 1]

Power Line as directed by the concerned Executive Engineer, PWD. [Rate should be quoted above/below in percentage basis/As per. For example: If one quotes rate 10% above, then the rate will be 1.1 and if one quotes rate 10% below, then the rate will be 0.9 & for'As per', the rate will be 1]

Site Development Works. [Rate should be quoted above/below in percentage basis/As per. For example: If one quotes rate 10% above, then the rate will be 1.1 and if one quotes rate 10% below, then the rate will be 0.9 & for'As per', the rate will be 1]

Trial Run as directed by the concerned Executive Engineer, PWD. [Rate should be quoted above/below in percentage basis/As per. For example: If one quotes rate 10% above, then the rate will be 1.1 and if one quotes rate 10% below, then the rate will be 0.9 & for'As per', the rate will be 1]