Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹3.3 LAdmitted-Finance | L1 | Admitted-Finance | ||
| 2 | L2₹3.8 L+₹55,166.79 (16.9%)Admitted-Finance | L2 | Admitted-Finance |
Tender Value
₹4.9 L
EMD Value
₹9,860
Closing Date
17 Aug 2026, 4:00 pmClosed
Executive Engineer PWD(RandB) Division Satwari
Office of the Executive Engineer PWD(RandB) Division Satwari
Aluminum partition, Repair of Compound wall and Installation of AC units at SDM Office Complex Jammu
2026_PWDJK_320382_1
Short e-NIT No. 62 of 2026-27 Dated 11-08-2026
Open Tender
Civil Works
Percentage
15 days
Satwari
As per eNIT
2 documents required · 2 mandatory
₹600
Executive Engineer PWD(RandB) Division Satwari
₹9,860
Satwari
22 Aug 2026
11 Aug 2026
18 Aug 2026
11 Aug 2026
17 Aug 2026
11 Aug 2026
12 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earthwork in all kinds of soil exvevated by Mechanical means in trenches for foundations, drains, pipes, cable etc. (not exceeding 1.5 in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5 Mtr including disposal of excavated earth upto 1 Mtr from cutting edge, disposed earth is to be levelled and neatly dressed. | 4.39 | Cum | 256.85 | ₹1,127.57 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate) 40mm nominal size crushed. | 0.88 | Cum | 4,826.5 | ₹4,247.32 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate) 20 mm nominal size crushed. | 3.51 | Cum | 5,733.6 | ₹20,124.94 |
| 4 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in cement mortar 1:6 (1 cement : 6 fine sand). | 3.87 | Cum | 7,571.55 | ₹29,301.9 |
| 5 | Extra for brick work in super structure above plinth level upto floor V-level. | 3.95 | Cum | 1,455.65 | ₹5,749.82 |
| 6 | 12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand) | 34.57 | Sqm | 266.2 | ₹9,202.53 |
| 7 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) | 8.03 | Sqm | 441.4 | ₹3,544.44 |
| 8 | Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work | 26.77 | Sqm | 50.75 | ₹1,358.58 |
| 9 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) | 34.57 | Sqm | 185.2 | ₹6,402.36 |
| 10 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) | 47.58 | Sqm | 1,201.8 | ₹57,181.64 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.04 MB
BOQ_1065572.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .