REPAIR TO TOILETS FLOORING PLUMBING SANITARY FITTINGS FIXTURES IN NIRBHAY VIHAR HAVELOCK LINE COMPBELL LINLE 1/11 GR 11 GRRC THIMMAYA MARG KASTURBA ROAD RAK SF MGSF GAUR ENCLAVE DILKUSHA RAK MARG AND OTHER JCOs/OR MD/OTM ACCN UNDER GE WEST LUCKNOW

Amount

M & L for rendering 10mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth without using extra cement including taking down old plaster complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surface and finishing the surface even and fair including taking down old plaster complete all as specified and directed.

Cutting chases for concealed water tubing and making good to disturbed surfaces in CM 1:3 cutting not exc 10cm in girth complete all as specified and directed.

Taking up or down steel tubing & connection 15 mm bore including S & F for GI tubing medium grade 15mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down steel tubing & connection 20 mm bore including S & F for GI tubing medium grade 20mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L for Brick work with sub class ‘B’ burnt bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including demolition of old brick work complete all as specified and directed.

M & L Brick work, with sub class 'B' burnt bricks, straight or curved on plan to any radius as in half brick thick walls built in CM. 1:4 using old size brick including demolition of old brick work complete all as specified and directed.

M & L for Non skid coloured ceramic tiles 300x300x6-7mm thick in floor including 15mm thick screed bed or bedding layer of mortar 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of old tile complete all as specified and directed.

M & L for vitrified tiles 10mm thick light shade square polished, area of each tiles n. exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 including dismantling of old tile complete all as specified and directed.

M & L for vitrified tiles 10mm thick light shade square polished, area of each tiles n. exc 0.36 sqm on vertical surfaces such as skirting/dados etc over and including 10mm thick backing coat in CM 1:4 including dismantling of old tile complete all as specified and directed.

M & L for coloured glazed ceramic tiles 300x600x 7 mm thick but as on vertical surfaces such as skirting/dado including 10mm thick backing coat in CM 1:4 including dismantling of old tile complete all as specified and directed.

M & L for 75 mm thick cement concrete type C1(1:3:6) using 20mm graded stone aggrtegate as in plinth protection including finsihing even & fair including demolition of old concrete complete all as specified directed.

M & L for 75 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base etc including demolition of old concrete complete all as specified and directed.

S&F in repair bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed. Make :- JAQUAR (KUBIX PRIME) CAT PART No. KUP-35037PM or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair for CP Pillar taps fancy type15mm brass with capsten head chromium plated, screwed down high pressure with or without lettered "hot or cold" water long screwed both ends for iron pipe complete all as specified and directed. Make:- Jaquar CAT PART NO KUP 35001PM or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair CP brass stop/angle valves 15mm bore fancy type chromium plated with quarter turn handle and wall flange complete all as specified and directed. Make:- JAQUAR (KUBIX PRIME) CAT PART No. KUP-35053PM or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair for 15mm bore CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make:- Jaquar CAT PART NO KUP35051BPM or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair Single lever Wall mixer 3 in 1 system with provision of both hand shower and over head shower complete with 115mm long bend pipe on upper side connecting legs and wall flanges (without hand and over head shower) including all fittings and fixed complete all as specified and directed. Make:- JAQUAR (KUBIX PRIME) CAT PART No. KUP-35117PM or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair Overhead shower 200 x 200mm square shape single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 450mm long including all fittings and fixed complete all as specified and directed. Make:- JAQUAR CAT PART No. OHS-35497 & SHA 49483 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair health faucet (hand shower) with 1 mtr flexible tube with hot and cold water supply wall hook, bracket etc complete set of superior quality complete all as specified and directed. Make: JAQUAR CAT PART No. ALD-565 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair Glass corner self, fancy type, 250x250 and 10mm thick fixed with brass bracket and screwed complete all as specified and directed. Make: JAQUAR CAT PART No. CAN 1173 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket, guard and railing 60cm long complete all as specified and directed. Make: JAQUAR CAT PART No. CAN 1171N or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair 15mm bore concealed stop valves brass, chromium plated long shank, with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair 20mm bore gate valves with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair 15mm bore gate valves with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed of 32mm complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10ltrs capacity, syphonic action type, white with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polythelene of low or high density complete all as specified and directed.

S & F in repairs PVC connection pipe 15mm bore with PTMT nuts of 600mm long complete all as specified and directed.

S & F in repairs WHB vitreous china, white, flat back, size 550x400mm incl brackets, waste coupling and waste pipe complete all as specified and directed.

S & F in repair vitreous china Water closet pedestal pattern with seat cover white and flushing pipe 32mm dia for low level flushing cistern (excluding fixing bolts, flushing cistern and flush pipe) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc complete all as specified and directed.

S & F in repair vitreous china squatting pan Orissa pattern long pan size 580 x 440mm with CI trap long neck 100mm with integral foot rest & fixing incl making good floor to match complete all as specified and directed.

S & F in repair grating doom 100mm dia of CP (min wt-25gms) complete all as specified and directed.

S & F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repair kitchen sink with drainage board made out of stainless steel 1mm thick with plug washer waste coupling waste pipe incl bedding in cement mortar, connection to union and drain pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair stainless steel kitchen plate rack made out of 1mm thick stainless steel sheet of size 900mm x 600mm x 250mm of approved pattern complete all as specified and directed.

S & F in repair PVC coloured bath cabinet overall size 560 x 410mm decorative design with looking mirror including all fittings complete all as specified and directed.

Dismantling water tanks of capacity exc 250 & n. exc 500 ltr and S & F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed.

Dismantling water tanks of capacity exc 500 & n. exc 1000 ltr and S & F 1000 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed.

S & F in repair PVC tank cover with locking arrangement for 500 / 1000 ltrs water tank complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes exc 250 & n exc 500 ltrs etc complete all as specified and directed.

Cleaning and removing all scale and dirt,etc,from tanks and from mouths of circulating pipes exc 500 & n exc 1000 ltrs etc complete all as specified and directed.

S & F in repair 20mm dia ball valve high pressure, of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.

S & F in repair 110mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F in repair 75mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F in repair PVC(SWR) bends 110mm dia complete all as specified and directed.

S & F in repair PVC(SWR) bends 75 mm dia complete all as specified and directed.

S & F in repairs CP tubular towel rod, 20mm dia, "D" type, 60cm long between flange complete all as specified and directed.

S & F in repair 40 mm bore Brass chromium plated Waste coupling for kitchen sink with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.

S & F in repair suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L for preparation newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for prepration of old treated surface of wall and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old treated surface of ceiling and applying one coat of white wash complete all as specified and directed.

M & L for preparation old treated surface of wall and applying one coats of cement base paint complete all as specified and directed.

M & L for preparation of old treated surface of wall and applying one coat of oil bound distemper complete all as specified and directed.

M & L for preparation of old treated surface of wall and applying two coat of oil bound distemper complete all as specified and directed.

Material and labour for complete removal of existing treatment on wall and preparation of new/old surface of walls by washing rubbing and applying two coat of plastic emulsion over and incl one coats of 1mm thick birla wall care putty complete all as specified and directed.

M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint complete all as specified and directed.

M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamelled paint complete all as specified and directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" /9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed.

M & L for cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1-3mm as per site requirements the plastered/ old painted surface of wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps complete all as specified and directed.:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface.

M & L for one coat of acrylic water based exterior grade primer @ 0.9 lit (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and Allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and directed.

M & L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algal properties in @ 1.79 lit (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 lit per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.

S & F 18/19 mm thick BWR plywood interior grade both side with comercial face fixed with screwed to timber frame work edge chamfered as directed by Engineer-in-Charge complete all as specified and directed.

S & F 0.9 mm thick Decorative laminate (Mica) type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas complete all as specified and directed.

S & F in repair 18mm thick factory made 100% solid WPC pre-laminated any colour flush shutter (for cupboard and vanity etc) made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400 kg/cum and density of central core not less than 600 Kg/cum, manufacturer by an ISO 9001/2015 certified company complete all as specified and directed.

S & F Auto concealed Hinges SS size 103mm64mmx28mm suitable for cabinet and wardrobe complete all as specified and directed.

S & F 100mm size stainless steel handle fabricated type complete all as specified and directed.

S & F 100mm size stainless steel hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F magnet catcher 50 mm size for kitchen cup board shutter complete all as specified and as directed.

S&F Continuous (piano) hinges width of flange (whene open) 30mm mild steel, bright finish or elecro galvanised fixed with screw to timber frame work complete all as specified and directed by Engineer-in-Charge.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S & F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S & F in repair 25mm dia fancy type drapery curtain rod made of stainless steel including knobs (Latto) and side brackets complete all as specified and directed.

S & F in repair galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S & F in repair Aluminium floor door stopper two lagged and tongue with hard drawn steel spring fixed to floor 140mm complete all as specified and directed.

S & F pre-laminated coloured Solid PVC Wall panelling consisting of 5mm any colour PVC sheet inclusive of solvent cement and fixing at site on 5mm thick PVC sheet fillet of width 35mm PVC frame as per specification and drawing complete all as specified and directed.

M&L for 8mm thick laminated wooden flooring of approved colour and size fixed with approved adhesive as per manufacturer directions complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) area n.exc 1.5 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and directed.

Taking down shutters of any description n. exc 1.0 sqm each complete all as specified and directed.

Supply and fixing mild steel framed work as in door or gate of angle or other section with gusset plates,rails,braces,etc using ornamentel design as approved complete drilled for fixing of steel sheeting or other covering,doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging,fastening and fixing complete conforming to Fe-290 Gde E-165 (machine butt hinges and flat iron hold fasts to be measured seprately complete all as specified and directed.

Supply and fixing Bands, straps, supports or stays for rain water ventilating pipes including bolts if required, hooks for large gates, hook and pintel hinges, large hasp and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans, palin angle cleat for securing purlin to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and directed.

Supply and Fixing Factory made steel windows double shutter with tubular frame of size 40x79mmm having thickness of steel sheet not less than 1.5mm with 'Z' section side hung glazed shutter fixed (with sash bar) on external side and with wire guage shutter (without sash bar) on internal side and including steel handle 100mm long of MS flat 20x5mm made to shape 02 nos of MS tower bolts 100 mm on each shutter and fixing hooks & eye of standerd quality as approved by Engr -in -charge.

Supply and fixing framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and directed.

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed.

Supply and Fixing Pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

Supply and Fixing Pressed steel frames size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, lock strike plate etc complete all as specified and directed.

Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing second class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply and fixing for 30mm thick factory made flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing 35mm thick Second class hard wood (sal) glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc,without shash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specifed in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chawkhats complete all as specified and directed.

Supply and fixing for 35mm thick plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing 30mm thick Second class hard wood (sal) glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc,without shash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specifed in SSR Part-I section 8 clause 8.24(b) supplied and fitted to chawkhats all as specified and directed.

Supply and Fixing powder coated (thickness of powder coating shall not be less than 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed.

Supply and Fixing powder coated(thickness of powder coating shall not be less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Supply and fixing in repair anodised aluminium glazed side hung door shutter with frame using section 100 x 44mm x 1.5 mm thick with standard door section having style, top rail, lock rail as 83 x 44 x 1.5mm where as bottom rail will be made up of 100 x 44 x 1.5mm including 5mm thick plain sheet glass ordinary quality (Modi/Atul) including all necessary suitable handle, hinges, screw, jointing cleats, rubber packing, Aluminium snap beading and one No 200mm long Aluminium tower bolt, 100 mm long 3 Nos Aluminium hinges B-21 type and one No Mortice lock 100mm size 4 lever (vertical type) and hydraulic door closure for each shutter complete all as specified and directed.

Supply and Fixing powder coated(thickness of powder coating shall not be less than 50 micron) aluminium three track sliding type glazed window shutter with 5mm thick plain sheet glass fixed open track section 100x38x1.25mm having three track (two of glass & one of stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aparture 1.40mm) with members of window shutters of section 38x12x1.5mm and other standard Bombay sliding section including all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats glazing clips,rubber packing, Aluminium snap beeding etc all as specified and directed.

Supply and fixing 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

Supply and fixing in repair 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified and directed.

Supply and fixing 150mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed.

Supply and fixing aluminium anodized barrel tower bolts 200 mm of extruded section complete all as specified and directed.

Supply and fixing aluminium anodized barrel tower bolts 150 mm of extruded section complete all as specified and directed.

Supply and fixing 100mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed.

Supply and fixing butt hinges 100mm, mild steel hinges medium weight and fixed complete all as specified and directed.

Supply and fixing stainless steel butt hinges 100mm size medium weight and fixed complete all as specified and directed.

Supply and fixing 100mm size hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing butt hinges 75 mm mild steel hinges medium weight and fixed complete all as specified and directed.

Supply and fixing 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

Supply and fixing in repair 100mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed.

Supply and fixing in repair 150mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed.

Supply and fixing in repair aluminium anodized barrel tower bolts 150 mm of extruded section complete all as specified and directed.

Supply and fixing in repair for aluminium anodized barrel tower bolts 200 mm of extruded section complete all as specified and directed.

Supply and fixing in repair plain Aluminium sheet 0.56mm thick fixed with nails to wooden shutters complete all as specified and directed.

Supply and Fixing in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 150mm complete all as specified and directed.

Supply and fixing in repairs Aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 140mm complete all as specified and directed.

Supply and fixing in repair 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

Supply and fixing in repairs Mild steel window handle left/right including neccesary welding complete all as specified and directed.

Supply and fixing in repairs Mild Steel window peg stay for supporting window glass etc complete all as specified and directed.

Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing complete all as specified and directed.

Material and Labour for 3mm thick plain sheet glass ordinary quality including glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing in repair Aluminium (Die cast) body Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

Supply and fixing 8 to 10 mm dia dash through bolts (anchor fastner) of lenth exc 75mm but n exc 100mm including drilling holes in concrete/masonary walls structure using electrically oprated drill machine complete all as specified and directed.

Material and labour Running welding in repairs thickness of metal to be welded not exceeding 6 mm thick complete all as specified and directed.

Material and labour spott Welding in repairs n. exc 2.5cm in length thickness of metal to be welded not exceeding 6 mm thick complete all as specified and directed.

Supply and Fixing in repair Plain fillets square, rectangular or triangular in section exc 3 Sqcm n exc 6 Sqcm, Wrought finished, secured with nails or brads as in beads complete all as specified and directed.

Supply and fixing in repair 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and directed

Dismantling of timder scantlings 40 sq.cm and over in section, in any position complete all as specified and directed.

Material and Labour for Rolled mild steel section in Roof trusses (framed) trussed purlins, crane gantries, rails and fastening and heavy bracket framing ( Beam tee, angle channel or flat sections) etc Fe 290 (Gde-E-165) complete all as specified and directed

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets & ridge in roof coverings complete all as specified and directed.

Material and Labour for 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed in roofs, walls etc with Fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Material and labour for asbestos cement serrated redge for corrugated or semi corrugated sheets complete all as specified and directed.

S & F Prepainted Galvalume aluminium zinc coating GI Based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Prepainted Galvalume aluminium zinc coating GI Based plain steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down and refixing of aluminiun window shutter (sliding/opanable) in the same opening after repair/overhauling of aluminium shutter complete incl all necessary dpares all as specified and directed.

Supply and fixin in repair for aluminium section of size 38x65x1.3mm thick partition wall/wall panelling fixed to wall on aluminium frrame work fixed panel with 5mm thick plain glass and fixed with glazing clips rubber beading including suitable section complete all as specified and directed.

Supply and fixing in repair Gypsum board 600x600x12mm thick (texture finish), white prelaminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T- section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet of size 24x32x300mm and spaced at 1200mm c/c securely fixed to be structural soffits by approved hangers at 1200mm c/c. Hangers of GI wire 4mm dia to be fixed by approved rawl plug screw etc. The last hanger at the end of each main runner shall not be grater than 450mm from ajecent wall flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm c/c form 600x600mm module cross tee. Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19mm x19mm and 300mm long of white colour all as per manufaturer's complete all as specified and directed.

S & F in repair Rubber beading size 50x5mm for doors complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory windows and other frames / chawkhat of size 65 x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade) Calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (Max toxicity index 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws havinf min frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) & 1100N (Edge), min compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof water / moisture proof and fire retardant and fixed in position with MS hold fasts / lugs/ stainless steel dash fasternersof required dia and length complete as per the direction of Engr-in-charge. (MS hold fasts / lugs / SS dash fasterners shall be paid seprately.)

S & F 30mm thick factory made single extruded WPC (Wood polymer composite) solid panel flush door shutter comprising of virgin polymer of K Value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives having maximum density of 650kg/cum and screw withdrawl strength 50N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water / moisuture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed countersunk stainlesss steel screws complete all as specified and directed.

Supply and fixing in repairs stainless steel wardrope trolly of any shape and size with side sliding roller clip over stainless steel channel on both side fixed with steel size 33x20x8 inches with sliding rails complete all as specified and directed.

Supply and fixing in repair stainless steel modular type basket of size 20x16x8 inches with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed.

Supply and fixing in repair stainless steel modular type basket of size 20x16x6 inches with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed.

Supply and fixing in repair stainless steel modular type basket of size 20x16x4 inches with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed.

Supply and fixing in repair stainless steel modular type basket of size 28x20x4 inchesover stainless steel pipe revolving type with sliding rails complete all as specified and as directed..

Supply and fixing in repair stainless steel modular type basket of size 20x20x4 inches (pull out of 3 shelf) with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed.

Supply and fixing in repair stainless steel modular type basket of size 20x20x12 inches (pull out of 3 shelf) with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

M/S Reliance Construction

m/s raghubar dayal

M/s Bajpai Constructions

M/S KAUSHIK CONSTRUCTION

M/S S&R Construction

M/s Chandra Mohan and Sons

M/S S S A ASSOCIATES