Certain repair/Maint works to joinery sanitary fittings plastering sunken floor,internal water supply and misc works for MES installations and MES staff Quarters in the area of AGE B/R I area of GE(N) Ahmednagar

Amount

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed by Engineer-in-Charge.

M&L for 6mm thick asbestos cement corrugated or semicorrugated sheets as in roof, wall coverings fixed with J/L type bolts or cranked hook bolts etc complete all as specified and directed by Engineer-in-Charge.

M&L for serrated ridge for corrugated or semi-corrugated sheets fixed with ‘L’ ‘J’ type or cranted hook bolts etc complete all as specified and directed by Engineer-in-Charge.

Dismantling unframed work of timber scantlings 40 Sqm and over in any section, in any position etc complete all as specified and directed by Engineer-in-Charge.

S & F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weided tubes conforming ti I.S 1161-1998 grade St 240 etc complete all as specified and directed by Engineer-in-Charge.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including, Nainital or similar pattern roof coverings etc complete all as specified and directed by Engineer-in-Charge.

S & F MS flat as in wind ties incl all cutting , bending drilling conforming to Fe- 410 'O' or Fe- 310'O' etc complete all as specified and directed by Engineer-in-Charge.

Mild steel screw bolts 16 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5 cm n exc 30cm long etc complete all as specified and directed by Engineer-in-Charge.

M & L second class hardwood for weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps including demolition of wood work etc complete all as specified and directed by Engineer-in-Charge.

M & L for Preparing surface of wood and wood based materials, new or old, of any descripion and girth, not otherwise described and treated with two coats of creosote etc complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of synthetic enamel paint over a priming with red oxide and preparation of new steel surfaces of any description over 10 cm width or girth etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets etc complete all as specified and directed by Engineer-in-Charge.

S & F powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm etc complete all as specified and directed by Engineer-in-Charge.

M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc complete all as specified and directed by Engineer-in-Charge.

M & L for screed bed or bedding layer of mortar 15 mm thick in cement and sand mortar (1:6) for laying floor finishes etc complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick laid over 15mm thick screed in cement and sand mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge.

M & L for Machine cut kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado,window jambs and pillar laid over 10mm thick screed in cement and sand mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and mirror polishing etc complete all as specified and directed by Engineer-in-Charge.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Squre/Rectangular) are of each Tile Exc 0.18 Sqm but N exc 0.38Sqm in floors etc laid over screed bed in cement and sand mortar (1:6) set, jointed and pointed in neat cement slurry and pointed in coloured cement to match the shade of floors etc complete all as specified and directed by Engineer-in-Charge.

All as per Item No 21 (here-in-before) but as a skirting complete all as specified.

M&L for 10mm thick rendering in cement and sand mortar (1:4) as in back coat etc complete all as specified and directed by Engineer-in-Charge.

M&L for Ceramic Non-skid colouerd tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors laid over and including 15mm thick screed in cement and sand mortar (1:6) etc.set and jointed in neat cement slurry with and pointed in coloured cement and sand mortar match the colour of tiles etc complete all as specified and directed by Engineer-in-Charge.

M&L for non skid coloured ceramic tiles (of approved quality) 7 to 8mm thick (Squre/Rectangular) are of each Tile Exc 0.06 Sqm but N exc 0.11Sqm in floors laid over and including 15mm thick screed in cement and sand mortar (1:6) etc, set jointed and pointed in neat cement slurry and pointed in coloured cement to match in floors etc complete all as specified and directed by Engineer-in-Charge.

M&L for Glazed ceramic coloured tiles of size. 350x250x7mm/450x350x7mm thick on vertical surfaces of walls such as skirting / dado etc laid over 10mm thick screed in cement and sand mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed by Engineer-in-Charge.

M & L for chequered cement concrete tiles 30cm x 30cm x 20mm thick Rouber moulded with grey cement and pigment, including 15mm thick screed in cement and sand mortar (1:6), set jointed & pointed in neat cement slurry as in floors etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for 60mm thick, PCC pavers interlocking tiles of glossy finish, any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5mm graded mechanically crushed stone aggregates, factory made laid over and incl 30mm thick sand cushioning and joints filled with fine sand incl levelling & sweeping etc complete all as specified and directed by Engineer-in-Charge

Material and labour in repairs for granite slab, 16mm to 18 mm thick laid over and including 15 mm thick screed in cement and sand mortar (1:6), jointed with grey cement slurry and pointed with coloured cement to match the shade of kitchen platform and shelves including grinding and polishing the exposed edges etc complete all as specified and directed by Engineer-in-Charge

M&L for machine cut cudappa stone slab 20 - 25 mm thick laid over & including 15mm thick screed bed in cement and sand mortar (1:6) laid, jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed by Engineer-in-Charge.

Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness,wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall,PCC fillets,benching etc and removing of the rubbish to a distance not exceeding 500 M from the building and depositing where etc complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete of any description (Unreinforced) below or above ground floor incl concrete at junctions of parapets and roof terraces, flashings, Kerbs walls,PCC fillets, benching,coving of chajjah top/junctions etc complete all as specified and directed by Engineer-in-Charge.

Supplied only integral water proofing compound etc complete all as specified and directed by Engineer-in-Charge.

M &L for providing plain cement concrete (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) for roof, kerb, or mud stops,rounded or chamfered on edges etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10mm thick cement and sand mortar (1:4) on roof slab top, mixed with water proofing liquid finished even and fair without using extra cement etc complete all as specified and directed by Engineer-in-Charge. Note: Water Proofing liquid shall be measured and paid separately.

M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under etc complete all as specified and directed by Engineer-in-Charge.:- i) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sqm. ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg / Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturer's iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesble roof surfaces complete all as per manufacturer's instructions and as directed .

S&F in repais for prelaminated particle board 18/19 mm interior grade prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screw timber frame work Including dismantling board etc complete all as specified and directed by Engineer-in-Charge

S&F in repair continuous (paino) hinges, mild steel, bright finish or electrogalvanised width of flap (when open) in 40mm etc complete all as specified and directed by Engineer-in-Charge

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel bright finished etc complete all as specified and directed by Engineer-in-Charge

S&F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixing etc complete all as specified and directed by Engineer-in-Charge

Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 15 mm dia pipe etc complete all as specified and directed by Engineer-in-Charge

Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 20mm dia pipe etc complete all as specified and directed by Engineer-in-Charge

S & F 15 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed by Engineer-in-Charge

S & F 20 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs 15 mm dia Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs 15 mm dia bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated with fancy type, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs Vitreous China wash basin, white, flat back, size 580 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm dia Waste fittings, brass, chromium plated with waste pipe etc complete all as specified and directed by Engineer-in-Charge

S & F 32 mm dia Low density polyethylene pipes ( LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified.

S & F in repair brass chromium plated Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolt, flushing cistern and flush pipe) etc complete all as specified and directed by Engineer-in-Charge

S & F in repais Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs 10 Litrs PVC valveless,low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed by Engineer-in-Charge

S & F 75 mm dia PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement etc complete all as specified and directed by Engineer-in-Charge

S & F PVC connections15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed by Engineer-in-Charge

Dismantling water tanks and removing to store of capacity exc 250 & not exc 500 ltrs etc complete all as specified and directed by Engineer-in-Charge

Dismantling water tanks and removing to store of capacity exc 500 & not exc 1000 ltrs etc complete all as specified and directed by Engineer-in-Charge

Supply and and fixing, hoisting double layer PVC tank of 1000 ltr capacity including Supplied and fixed 20mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly etc complete all as specified and directed by Engineer-in-Charge

Supply and and fixing, hoisting double layer PVC tank of 500 ltr capacity including Supplied and fixed 20 mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly etc complete all as specified and directed by Engineer-in-Charge

S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm with grating and union for discharge pipe (excluding flushing cistern) including waste fitting, waste pipe etc complete all as specified and directed by Engineer-in-Charge

S&F soap dish chromium plated and type fixed to plugs with CP brass screw fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

S&F in repair CP Basin Mixer for mixing hot & cold water of approved quality etc complete all as specified and directed by Engineer-in-Charge

S&F in repair wall mixture mixing valves incl. three joints to steel pipes or unions 15 mm bore fancy type best quality as per sample approved by GE fixed in reapirs etc complete all as specified and directed by Engineer-in-Charge

S & F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.as in repairs etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs ball valve high pressure of PTMT with epoxy coated , aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete.( 210 gms weight ) etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs ball valve high pressure of PTMT wiyh epoxy coated , aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 15 mm bore (142 gms weight ) etc complete all as specified and directed by Engineer-in-Charge

S&F stainless steel plate rack of size not less than 90cmx75cm fixed with stainless steel screw including taking out old unserviceable wooden plate rack as approved by GE etc complete all as specified and directed by Engineer-in-Charge

S&F in repair 15 mm any type of spandle for stop cock, bib tap, pillar tap, wash basin mixer and wall mixer etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

S&F 8mm thick corner glass shelf fixed with brackets and including chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed by Engineer-in-Charge

M&L special treatment to sunken portion with 10mm thick plaster in cement and sand mortar (1:4) with WPC liquid Complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plastered surfaces.rendering again 10mm thick in cement and sand mortar (1:4) mixed with Complast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 1.5 Sqm including 40 mm dia 0.60 m pipe etc complete all as specified and directed by Engineer-in-Charge

All as per ite No 75 (here-in-before) but for kitchen area n exc 0.50 sqm on plan etc complete all as specified and directed by Engineer-in-Charge

All as per ite No 75 (here-in-before) but the area of sunken portion exc 1.5 Sqm but n. exc 4 Sqm on plan etc complete all as specified and directed by Engineer-in-Charge

S&F Health faucet including MS/anodised hanging device fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

M&L for applying two coats of synthetic enamel paint over priming with red oxide over preparation of new steel surfaces of any description over 10 cm width or girth etc complete all as specified and directed by Engineer-in-Charge

Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge

M & L for rendering 15 mm thick on any type of face of brick work or concrete surfaces in cement and sand mortar (1:4) surface finished even and smooth ( without using extra cement) etc complete all as specified and directed by Engineer-in-Charge

M & L for rendering 15 mm thick on any type of face of brick work or concrete surfaces in cement and sand mortar (1:6) surface finished even and smooth ( without using extra cement ) with sagol finish on plastered surface etc complete all as specified and directed by Engineer-in-Charge

M&L for applying two coats of cement base paint over chalk whitening newly plastered surfaces of walls including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over 2mm thick wall care putty over one coat of chalk whitening primer etc complete all as specified and directed by Engineer-in-Charge

M&L for applying two coats of white wash on newly plastered surface including preparation of surface etc complete all as specified and directed by Engineer-in-Charge

Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) etc complete all as specified and directed by Engineer-in-Charge

M&L for 75 mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection etc complete all as specified and directed by Engineer-in-Charge

Demolition of brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar etc complete all as specified and directed by Engineer-in-Charge

M&L for Pre-cast cement concrete block masonry of (1:3:6) type C-1 (20 mm graded stone aggregate) with solid blocks, exc. 10 cm in width complete set in and including cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 2 sq.m each etc complete all as specified and directed by Engineer-in-Charge

M & L for 2 nd class hardwood as glazed and skeleton shutters factory made, 35 mm thk open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutter as specified in SSR Part l, section 8, clause 8.24 ( a ); supplied and fitted to chowkats etc complete all as specified and directed by Engineer-in-Charge

All as per item No 91 but divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars, any numbers (30 mm thk) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkat or frame with shutters (with out taking off shutter from the frame ) not exceeding 1.5 Sqm each etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames exc.1.5 sq.m but not exc. 4 sq.m each but with shutters ( without taking off shutters from the frame ) and removing to or from store etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 sq.m and n.exc 2 Sqm each store etc complete all as specified and directed by Engineer-in-Charge

S&F 35 mm thick second class hardwood factory made plain,framed, panelled shutters ( any number of panel ) with panels of timber flat on both sides (feather edged ) or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to choukats etc complete all as specified and directed by Engineer-in-Charge

M & L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed etc complete all as specified and directed by Engineer-in-Charge

M & L for solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing etc complete all as specified and directed by Engineer-in-Charge

M & L for factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of M.S.tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour 'PVC'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S & F powder coated aluminium doors, shutters, side hung type with sash bars, locking rails, locking arrangements and hydraulic door closing arrangement including necessay joinery cleats, glazing clips, rubber packing, howkats aluminium snap beading, screws, suitable handle etc with and including tintet sheet glass or ordinary glasing quality of 5mm thick size of lock rails 44.45x81.50mm side rails 85x44.45mm top rail 83.5x44.45mm, bottom rail 101.6x44.45mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member 1.40mm thick etc complete all as specified and directed by Engineer-in-Charge

S & F powder coated aluminium sliding window,three track shutters, side hung type with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, Chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 4mm thick and incl stainless steel wire mesh 0.36 mm nominal dia of wire and average width of aperture 1.18 mm , size of side rails , top rails , bottom rail 85x44.5mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member shall be 1.40mm thick etc complete all as specified and directed by Engineer-in-Charge

S&F in repair 25mm dia Drapory Rod aluminium powder coated with end fittings not less than 75gms each and fixed with steel screw to walls etc complete all as specified and directed by Engineer-in-Charge

M&L for preparing old decorative plastered surface of walls by removal of existing treatment washing rubbing down and applying two coats of distemper oil emulsion over a coat of chalk whiting primer over one coat of 2mm thick wall care putty wall care 2mm thk putty etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 103 (here-in-before) but as on ceiling

S&F in repairs door closer hydraulically regulated of aluminium (die cast ) body designation No-2,universal type,suitable for door shutters of 701 to 850 mm in width and of wight between 36 to 60 kg and fixed etc complete all as specified and directed by Engineer-in-Charge

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloly sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty etc complete all as specified and directed by Engineer-in-Charge

S&F in repair PVC water jet for pedestial pattern water closet of 15mm bore and 600mm long etc complete all as specified and directed by Engineer-in-Charge

S&F 18 mm thick Plywood BWR type BB, fixed with screws to timber frame work etc complete all as specified and directed by Engineer-in-Charge

S&F flush shutter ,solid core construction ,with block board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around ,30 mm thick etc complete all as specified and directed by Engineer-in-Charge

M&L for decorative laminate type I,of surface finish ,colour and pattern as approved fixed with approved adhesive as per maker's instruction, 0.9mm thick laminate etc complete all as specified and directed by Engineer-in-Charge

S & F extruded Brass handles, fabricated type polished 150 mm etc complete all as specified and directed by Engineer-in-Charge

S&F brass, barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed in repair 200 mm etc complete all as specified and directed by Engineer-in-Charge

S & F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 250mm etc complete all as specified and directed by Engineer-in-Charge

S & F brass , sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 300mm etc complete all as specified and directed by Engineer-in-Charge

S & F floor door stpper of brass , body and tongue with hard drawn steel spring 140mm overaii length of cover plate etc complete all as specified and directed by Engineer-in-Charge

S & F Butt hinges, medium weight, Brass, and fixed 125 mm length etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm.with 32 mm dia Waste fittings, brass chromium plated etc complete all as specified and directed by Engineer-in-Charge

S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes etc complete all as specified and directed by Engineer-in-Charge

S&F in repair for stainless steel wire cloths 0.36mm nominal dia and avrage width of apreture 1.18mm & fixed with tint tacks or glavinized wire staples etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs 300 mm long MS helical door spring, inclunding roller and roller plate complete etc complete all as specified and directed by Engineer-in-Charge

S & F Butt hinges, medium weight, stainless steel, and fixed 100 mm length etc complete all as specified and directed by Engineer-in-Charge

S & F Aluminium handles, cast type, anodised handle 150 mm etc complete all as specified and directed by Engineer-in-Charge

S & F Aluminium, anodised, barrel tower bolts, of extruded section and fixed 150 mm etc complete all as specified and directed by Engineer-in-Charge

S & F Butt hinges, medium weight, cold rolled mild steel, and fixed 75 mm length etc complete all as specified and directed by Engineer-in-Charge

S & F 250mm aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type ) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and directed by Engineer-in-Charge

M & L for cement concrete (1:3:6) type C1 (20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges etc complete all as specified and directed by Engineer-in-Charge

S&F mild steel as hold fasts Fe.290.Gde-E-165 etc complete all as specified and directed by Engineer-in-Charge

M&L for applying two coats of synthetic enamel paint on wooden surface over a coat of pink primer including preparation of new surfaces of any description, not otherwise described, over 10 cm width or girth etc complete all as specified and directed by Engineer-in-Charge

M & L for Cement concrete (1:5:10) type E-2 using (40mm graded stone aggregate) as foundations,filling and mass concrete etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description n.exc 1 sq.m each etc complete all as specified and directed by Engineer-in-Charge

S&F framed work such as grills, gratings, etc with ends of bars, shouldered and /or riveted, or forged into spicks, framed guard bars, ladders, framed balusters, walk ways, railings, framework of water tankd and similar work conforming to Fe 410-O etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old distempered surfaces of wall including washing rubbing down and stopping distempered surfaces and applying one coat of oil bound distemper (White or tinted) on walls etc complete all as specified and directed by Engineer-in-Charge

All as per item No.134 (here-in-before) but two coats of oil emulsion distemper.

M&L for preparation of old painted wood & wood based surfaces of any description, not otherwise described over 10cm width or girth and evenly applying one coat on synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

All as per item No 136 (here-in-before) but on steel & Iron surfaces.

S&F in repair 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated,complete: push pull or manual type etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 5mm thick plaster in cement and and mortar (1:3) any type of of brick work or concrete on surfaces of ceiling, finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash etc complete all as specified and directed by Engineer-in-Charge

Dismantling PVC Pipes with fittings upto 75mm to 110mm dia etc complete all as specified and directed by Engineer-in-Charge

S&F for PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring jointed level fixed to walls etc complete all as specified and directed by Engineer-in-Charge

S&F for PVC (SWR) pipe 75 mm dia single socketed in any length with rubber ring jointed level fixed to walls etc complete all as specified and directed by Engineer-in-Charge

S&F for PVC (SWR) bends with access door 110 mm dia etc complete all as specified and directed by Engineer-in-Charge

All as per item No 145 (here-in-before) but 75 mm dia.

S&F PVC (SWR) plain bend 110 mm dia etc complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) plain bend 75 mm dia etc complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) branch piece single or double T equal or unequal with access door 110 mm dia etc complete all as specified and directed by Engineer-in-Charge

All as per Item No 148 (here-in-before) but 75 mm dia.

S&F PVC (SWR) vent cowl 110 mm dia etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 48,875.00 shall be deducted from BOQ on account of schedule of credit

M/s A G Gund

M/s Meher Construction

M/S. M. F. Sharif & Co.

HG PATHAN CONSTRUCTION COMPANY

Priyadeep Construction

MS. G.A. CONSTRUCTION

M/S-B.R.SONAWANE