HIDCO/GM (Elec)_eNIT-27/2022-23

Amount

Supply and delivery 1.1 KV grade XLPE insulated stranded Alumunium conductor galvanised steel armoured cable of the following sizes. (Make: Havells / Polycab/ Gloster) (i) 3.5 core x 300 sq.mm.

Supply and delivery 1.1 KV grade XLPE insulated stranded Alumunium conductor galvanised steel armoured cable of the following sizes. (Make: Havells / Polycab/ Gloster) (ii) 3.5 core x 240 sq.mm.

Supply and delivery 1.1 KV grade XLPE insulated stranded Alumunium conductor galvanised steel armoured cable of the following sizes. (Make: Havells / Polycab/ Gloster) (iii) 3.5 core x 95 sq.mm.

Supply and delivery 1.1 KV grade XLPE insulated stranded Alumunium conductor galvanised steel armoured cable of the following sizes. (Make: Havells / Polycab/ Gloster) (iv) 3.5 core x 25 sq.mm.

Supply and delivery 1.1 KV grade XLPE insulated stranded Alumunium conductor galvanised steel armoured cable of the following sizes. (Make: Havells / Polycab/ Gloster) (v) 4 core x 16 sq.mm.

Supply and delivery 1.1 KV grade XLPE insulated stranded Alumunium conductor galvanised steel armoured cable of the following sizes. (Make: Havells / Polycab/ Gloster) (vi) 4 core x 25 sq.mm.

Laying of one No. cable upto. 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks / 80 mm dia HDPE Pipe Protection per metre, including filling the space between the brick / HDPE Pipe & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of one No. cable above 35 sqmm and upto. 185 sq.mm. in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks / 100 mm dia HDPE Pipe Protection per metre, including filling the space between the brick / HDPE Pipe & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of one No. cable above 185 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks / 100 mm dia HDPE Pipe Protection per metre, including filling the space between the brick / HDPE Pipe & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying only Cable upto 50 sqmm but not exceeding 400 sqmm through existing RCC/ Hume/GI Pipe/open masonary trench for single, 2, 3, 3½ and 4 core.

Laying only Cable above 50 sqmm but not exceeding 400 sqmm through existing RCC/ Hume/GI Pipe/open masonary trench for single, 2, 3, 3½ and 4 core.

Laying of 4 core 25 sq.mm. on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Finishing the end of following XLPE cables by crimping method including supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. (i) 3.5 core x 300 sq.mm.

Finishing the end of following XLPE cables by crimping method including supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. (ii) 3.5 core x 240 sq.mm.

Finishing the end of following XLPE cables by crimping method including supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. (iii) 3.5 core x 95 sq.mm.

Finishing the end of following XLPE cables by crimping method including supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. (iv) 3.5 core x 25 sq.mm.

Finishing the end of following XLPE cables by crimping method including supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. (v) 4 core x 16 sq.mm.

Finishing the end of following XLPE cables by crimping method including supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. (vi) 4 core x 25 sq.mm.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (i) 3.5 core x 300 sq.mm.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (ii) 3.5 core x 240 sq.mm.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (iii) 3.5 core x 95 sq.mm.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (iv) 3.5 core x 25 sq.mm.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (v) 4 core x 16 sq.mm.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (vi) 4 core x 25 sq.mm.

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. (e) 2 x 22/0.3 (4 sqmm) + 1 x 22/0.3 (2.5 sqmm)

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. (c) 2 x 22/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. (b) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

Supply & Fixing of twin LED light fitting with S & F of 22 Watt LED tube light with Aluminium Heat sink body including inbuild driver and complete all accessories. (Make : Philips or similar to equivalent)

Supply & Fixing of Single LED light fitting with S & F of 10 Watt LED tube light with Aluminium Heat sink body including inbuild driver and complete all accessories. (Make : Philips or similar to equivalent)

Supply and fixing of 220V-250V, 36W Pendent LED light fittings to be fixed in Ture ceiling and supporting arrangement as per material approval and direction of EIC. (Make : K-light/Philips/Crompton)

Supply and fixing of 220V-250V, 22 W Square LED Type surface mounting low depth LED light fittings with driver and good quality defuse having system lumen output not less than 2700-3000k lumen and lumen efficiency not less than 90 lumen per watt and input power not more than 40 watt , to be fixed in True ceiling as per material approval and direction of EIC.(Make : k-Light/ Philips / Crompton)

Supply, Delivery & Fixing of 18 watt Up-Down light. (Make : K-light/Philips/Crompton)

Supply & Fixing of 16'' (400mm) wall bracket fan on wooden block/wall by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length. (Make- Crompton Greeves- Hiflo Wave (white colour)/Orient/Havells/as per direction of EIC.

Supply & Laying of HDPE (Materials grade PE-100) pipes conforming to IS 4984- 1995 with latest revision & amendments if any with necessary HDPE specials including cutting road flank/ brick pavement etc. without damaging the exisiting telephone/electrical cable line etc. 1.10m.earth cushion from top of the pipe upto G.L. (A) Pressure Rating : PN 6. (a) 100 mm dia

Supply & Laying of HDPE (Materials grade PE-100) pipes conforming to IS 4984- 1995 with latest revision & amendments if any with necessary HDPE specials including cutting road flank/ brick pavement etc. without damaging the exisiting telephone/electrical cable line etc. 1.10m.earth cushion from top of the pipe upto G.L. (A) Pressure Rating : PN 6. (b) 75 mm dia

Supply & Laying of HDPE (Materials grade PE-100) pipes conforming to IS 4984- 1995 with latest revision & amendments if any with necessary HDPE specials including cutting road flank/ brick pavement etc. without damaging the exisiting telephone/electrical cable line etc. 1.10m.earth cushion from top of the pipe upto G.L. (A) Pressure Rating : PN 6. © 50 mm dia

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) (d) 32 mm dia 3 mm thick Polythene Pipe.

Cutting channel of 31 mm x 31 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building works. 13 mm dia 3 mm thick polythene pipe with 1x16 SWG GI earth continuity.

Supply, Delivery & Fixing of heavy duty 9"Exhaust Fan (1400 RMP). (Make: EPC/Orient/Havells)

Supplying and fixing 6 Way double door VTPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. enclossure Box Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 100 Amp 4P MCCB (25 KA) as incomer and 06 nos. 63 A TPMCBs as outgoing. (Make – Legrand / L& T/ Siemens/as per direction of EIC).

Supplying and fixing 4 Way double door TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 01 nos. 63 Amp 4P MCB as incomer and 16 nos. 16-32 A SPMCBs as outgoing. (Make – Legrand / L& T/ Siemens/as per direction of EIC). (for Power distribution of different areas)

Supply & fixing 240V 06 Nos. 16A, Modular type Switch with 06 Nos. 16A Modular type Socket (Make: Legrand/ ABB / Hager), 18 Module PVC type switch board with 18 Module cover plate flushed in wall incl. S & F switch baord and cover plate and making necy. conections with PVC Cu wire and earth continuity wire etc.

Supply & fixing 240V 07 Nos. 16A, Modular type Switch with 07 Nos. 16A Modular type Socket (Make: Legrand/ ABB / Hager), 03 Module PVC type switch board with 03 Module cover plate flushed in wall incl. S & F switch baord and cover plate and making necy. conections with PVC Cu wire and earth continuity wire etc.

Supply & fixing 240V 08 Nos. 16A, Modular type Switch with 08 Nos. 16A Modular type Socket (Make: Legrand/ ABB / Hager), 03 Module PVC type switch board with 03 Module cover plate flushed in wall incl. S & F switch baord and cover plate and making necy. conections with PVC Cu wire and earth continuity wire etc.

Supply & fixing 240V 06 Nos. 6A, Modular type Switch with 01 Nos. 6A Modular type Socket (Make: Legrand/ ABB / Hager), 08 Module PVC type switch board with 08 Module cover plate flushed in wall incl. S & F switch baord and cover plate and making necy. conections with PVC Cu wire and earth continuity wire etc.

Supply & fixing 240V 12 Nos. 16A, Modular type Switch with 12 Nos. 16A Modular type Socket (Make: Legrand/ ABB / Hager), 03 Module PVC type switch board with 03 Module cover plate flushed in wall incl. S & F switch baord and cover plate and making necy. conections with PVC Cu wire and earth continuity wire etc.

Supply & fixing 240V 02 Nos. 16A, Modular type Switch with 02 Nos. 16A Modular type Socket (Make: Legrand/ ABB / Hager), 06 Module PVC type switch board with 06 Module cover plate flushed in wall incl. S & F switch baord and cover plate and making necy. conections with PVC Cu wire and earth continuity wire etc.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular PVC switch board with top cover plate flushed in wall incl. mending good damages to original finish [PVC casing-capping on surface and Switch board concealed] (b) Average run 7.5 mtr

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. (i) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. (ii) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. (iii) 2 x 56/0.3 (4.0 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

Supply & Delivery of Single industrial type 4 ft long LED tube light fittings complete with driver and all accessories incl. supply of 1 nos T-8 LED Tube light with aluminium heat sink having lumen output not less than 2100 and colour temperature -6500K as per approval of EIC, (Make - Philips, Model - TMC 501 P 1xT-LED 22W P3242 (Fittings)/Mas LEDtube 1200mm 18W865 T8 I – 2100lm (LED tube) or Crompton / Wipro make having similar specification in all respect)

Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. i) 4.00 sq mm.`

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. ii) 2.50 sq mm.

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. iii) 1.50 sq.mm.

Supply & Fixing of spot / Track light series, adopt aluminium which has excellent mechanical strength, extruded aluminium for better thermal management, adopting reflector which is with excellent optics effect and excellent spot light effect with 30 watt LED luminaire, with 2 circuit connector, directionally adjustable, convenient installation with 12 / 24 / 36 degree beam angle, IP 20 protection with 240V, 50 Hz single phase ac supply through cable entires of mains supply.

Connecting the equipments body to straight bar incl. S & F 25 mm x 6 mm Galvanized (Hot Dip) MS flat on hanging with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

Fixing of Track light fitting accessories with suspended 25 cm bellow the ceiling with suitable dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5 sqmm) flexible copper wire of 1.10 mt. length

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for Liner LED installation, for overhead of building per vertical run.

M.S Structural works in angle, channel sections conforming to IS: 226, iS: 808 & Sp (6) – 1964 connected to one another with bracket, .............. complete.

Welding in M.S. structural work with gas or electric: (a) Tack weld

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. (ii) With 25x25x3mm angle iron support. 200x50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. (ii) With 25x25x3mm angle iron support. 300x50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S & F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 200x50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S & F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 300x50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 200x50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 300x50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray cross member with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 200x50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray cross member with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 300x50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray reducer with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the reducer incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 200x50x1.25mm (18SWG)

Supply & Fixing of perforated GI cable tray reducer with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the reducer incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 300x50x1.25mm (18SWG)

Supply, delivery & Fixing of LED street light luminarie IP 66 PDC Street light with minimum 200 W or above , efficacy must be 125 lumen / Watt or above aerodynamically designed with built-in tilting arrangement and better thermal management (Make Crompton - CRP-413-200-57-SL-GL-HR-NGG /similar specification of it in all respect)

Supply & Fixing of 36 watt LED Liner Light with IP-67 protection incl. 12V DC / 24V AC DMX 512 Control Potocol of lumen efficacy 66 Lm/W, beam angle 120 degree SMD Osram make LED with power consumption 15W/M with 24V 2.5A LED Water proof Driver for above mentioned for flexiable liner strip light. (Make : Klite or similar to inrespect of equivalent make)

Supply & Fixing of 12 watt LED Liner Light with IP-67 protection incl. 12V DC / 24V AC DMX 512 Control Potocol of lumen efficacy 66 Lm/W, beam angle 120 degree SMD Osram make LED with power consumption 15W/M. with 24V 1.25A LED Water proof Driver. (Make : Klite or similar to inrespect of equivalent make)

Supplying and delivering of DAIKIN make 415V-3Ph 50Hz Top Discharge type Next generation variable refrigeration volume system. Each Outdoor unit comprises of all inverter driven Compressors, air cooled condenser with protective coated fins, propeller type fan with motor, electronic expansion valve, microprocessor panel and other standard accessories as per specification the unit shall be suitable for operation with R-410A refrigerant. - Make - Daikin. 20 HP single modular Outdoor unit (20HPX1)

Supply & installation of Daikin make 4 Way roundlflow Cassette type VRV Indoor unit of 4 TR capacity with cordless remote

Supply, Installation, Testing & Commissioning of high pressure copper refrigerant piping suitable for R 410a refrigerant of suitable size as required and duly insulated with 19mm/13mm thick EPDM closed cell elastomeric insulation All insulation joints shall have tape of same material with equivalent fire rating as the insulation. Entire refrigerant piping work is to be carried out in accordance with the specifications.

Supplying and installation of copper pipe Y joints / refnets for application as distribution joint of of copper pipeline network to enable prpoer variable flow of regrigerant in the pipeline system

Supply & fixing of control cum transmission wiring of Copper conductor cable along with conduit for looping between indoor & outdoor VRF system

Supply and fixing of 25 mm dia rigid PVC drain piping complete with fittings, supports

Supply & fixing of standard MS Stand for Indoor unit and Tray

Nitrogen pressure testing, leak testing, vaccumisation and commissioning of VRV system

supply and charding of regfrigerant gas (R410A)

G.I. cover for pipeline outside the building

Supply & fixing of control cum transmission wiring of Copper conductor cable along with conduit for looping between indoor & outdoor VRF system

Supply and fixing of 25 mm dia rigid PVC drain piping complete with fittings

Supply & fixing of base for outdoor unit including vibration pads for outdoor unit

Supply & fixing of G.I. Cable Tray for copper pipe, cable and drain pipe supporting arrangement

Lifting charge of machine

Supply and installation of electrical motor driven fire water main pump for hydrant / Sprinkler system of horizontal centrifugal type 131 M3/Hr., 70 MWC rated head 2900 RPM, with motor, base plate, foundation bolt, nuts and all accessories, bronze impeller, common base frame, pushy-foot etc. (75 HP 55 KW) self printing type.

Diesel Engine Drive Standby Fire Pump set Capacity of Pump = 2850 LPM Head = 70 Meters.

Supply and installation of electrical fire water jockey pump horizontal centrifugal 10.8 M3/Hr., 70 MWC rated head 2900 RPM, with motor, base plate, foundation bolts, nuts and all accessories, bronze impeller, common base frame, cushy-foot etc. (15 HP 11 KW).

Providing & fixing of Mild steel (Medium) above ground pipe as per IS-1239 including fittings viz. bends, flanges, nut and bolt, gasket etc. i) 150mm NB dia

ii) 80mm NB dia

iii) 50mm NB dia

Providing and fixing Cast iron gate valve / Sluice valve PN 1.6 Non-Rising stem, as internal, conforming to IS-14846 with companion flags, nuts & bolts etc. i) 150 mm NB dia

ii) 50 mm dia

Providing and fixing Cast iron double flanged Non Return valve following sizes relevant IS-5312 specifications shall including providing and fixing nuts & bolts, gaskets, washer etc. complete as required. i) 150 mm NB dia

ii) 50 mm dia

Providing and fixing Glove valve as per IS-778 i) 15mm NB dia

Providing and fixing of Butterfly valve of rating PN 1.6 with bronze / gun metal seat complete with nuts & bolts, gaskets conforming to IS-13095. of following sizes as required. i) 80mm NB dia

Providing and fixing of Pressure gauge 0-16 Kg / cm2

Providing and fixing of pressure switch (RT-5, RT-116SB)

Providing and fixing of Pressure relief valve. i) 15mm NB dia

Providing and fixing of CI body flanged type foot valve with strainer of conforming to relevant IS specifications, including providing and fixing nuts & bolts, gaskets, washers etc. complete as required. i) 150mm NB dia

ii) 80mm NB dia

Providing and fixing of providing & mild steel (medium) above ground pipe as per IS-1239 including fittings viz. bends, flanges, nut & bolt, gasket etc. i) 150mm NB dia

ii) 80mm NB dia

Providing and fixing of Hydrant valve (Stainless steel) as per IS-5290 / blank cap, chain etc. (Suitable size). i) Single Headed type - A

Providing and fixing of SS providing and fixing of Yard Hydrant valve (Stainless steel) as per IS-903, binded with copper wire, (Suitable size). i) Single Headed type - A

Providing and fixing of fire RRL Hose. IS-8423 with SS coupling as per IS-903, binded with copper wire. i) 63mm dia x 15m. Long

Providing and fixing of 2.5 mm thk. wall mounted MS Hose Box of 750 x 600 x 250 (D) with lock and key arrangement

Providing and fixing of Stainless steel Branch pipe with nozzle as per IS-903. (Suitable Size).

Providing and fixing First Hose Reel drum with 20 X 30M long hose & accessories as per IS-884.

Providing and fixing Cast iron double flanged Non Return valve following sizes relevant IS : 5312 specifications shall including providing and fixing nuts & bolts, gaskets, washers etc. complete as required. i) 150mm NB dia

Providing and fixing of 25 NB single outlet Air release valve as per IS-14845.

Providing and fixing of 4 way Fire brigade connecting (IS-904).

Providing and fixing of Stainless ball valve as per BS-5351. i) 25mm NB dia

Providing and fixing of Alarm valve complete with accessories, 150 NB for sprinkler system along with basic hydraulic, water motor gong trim, drain valve etc. complete as per requirement.

Providing and fixing of ISI marked butterfly valve of rating PN 1.6 with bronze / gun metal seat complete with nuts & bolts, gaskets conforming to IS-13095 of following sizes as required. i) 80mm NB dia

Providing and fixing cast iron double flanged non Return valve following sizes relevant IS-5312 specifications shall including providing and fixing nuts & bolts, gaskets washers etc. complete as required. i) 80mm NB dia

Providing and fixing of standard response spray type sprinkler Bulb of 68⁰C tamp (Pendent type, UL listed)

Supply and fittings fixing of flexible sprinkler hose pipe 1000 mm.

Providing and fixing of Pressure relief valve. i) 25mm NB dia

Providing and fixing of Stainless steel ball valve as per BS-5351. i) 25mm NB dia

Providing & fixing of mild steel (Medium) pipe as per IS-1239 including fittings viz. bends, flanges, nut and bolt, gasket etc. i) 150mm NB dia

ii) 80mm NB dia

iii) 50mm NB dia

iv) 25mm NB dia

Providing and fixing of 2 loop Addressable Fire alarm system complete in all respect.

Supply & drawing 1.1 KV Grade 2 X 1.5 sq.mm. PVC insulated & unsheathed multi-stranded flex. Cu wire (Finolex / Technoflex / MEM / Havells) with 20mm dia PVC ridig conduit 'FR' (precision make) on wall, ceiling with saddles and other accessories as required and mending good damages to building works.

Providing and fixing of addressable type multicriteria smoke detector

Providing and fixing of manual call point (Break Glass type) addressable.

Providing and fixing of Electronic hooter with strobe.

Providing and fixing of P.A. Hooter (5 watts)

Providing and fixing of P.A. System complete with 45 watts including mouth piece etc.

Providing and fixing of ABC stored pressure type dry power fire extinguisher (6 kg. Capacity) IS-15683.

Providing and fixing of CO2 type fire extinguisher (4.5 kg capacity)

Providing and fixing of CO2 type fire extinguisher (2 Kg capacity)

Providing and fixing self illuminated type Exit sign.

Providing and fixing of self illuminated type Floor number.

Providing and fixing of self illuminated type Notice board.

Providing and fixing of self illuminated type ‘IN Case OF FIRE, USE STAIR’.

Providiing earthing for the all Pumping machineries LDB with sufficient of earth pit & making light protection arrangement of the building with 4 Nos. of earth pit as per IS standard & IE Rule.

Supply, delivery & storage of dust and vermin proof cubicle type motor control centre fabricated from 14 SWG MS sheet with powder coated finish and comprising of required incomer, outgoing MCCB, meters & other accessories, Battery, Trickle cum Boost charger for Battery and all controls automatic above pump set.

Commissioning of the entire installation of fire fighting system and formalities for necessary inspection from Fire & Emergency Services Dept., Govt. of West Bengal including obtaining the No Objection Certificate from Fire Department.

M/S. M. RAJ AND CO.

RELIABLE CONSTRUCTION