Renovation work of Lalanji Bagicha in Shreenathji temple, Nathdwara

Amount

Marble stone flooring table rubbed, 35 mm thick over 20 mm (Av.) thick Rajnagar 1st Quality base of CM 1:4 ( 1 Cement : 4 coarse sand) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete.

Providing and Fixing 1st Quality Marble as per existing Chhatri of 0.930x0.930 with padestal of 1.420x1.420x0.600 including all carving pillars, dome, floweral design with polishing work and all type of masonry etc. All work to be done as per existing chhatari at Lalan Bagecha. The quality of marble should also match in the existing chhatari. The cost is excluding the cost of foundation.

Size of Comppnents

Marble carving pillars 75x75x700

Arch thickness 35mm thick

Dome size 725 mm dia approve

Chhaja 150mm wide and 20mm thick around it

Base marble stone with floweral design of chhatri 930x930x50mm

Vedi as per design Cladding below chhatri 150x75mm

Top marble stone of padestal with floweral design 1420x1420x50mm

Cladding for padestal with carving 50mm thick

Corner marble pillars with carving for padestal 150x150x420mm

Providing and Fixing sand blast Finish Kota stone flooring 25-30mm thick skirting laid over 20mm thick base of CM 1:4 and jointed with gray cement slurry to match the shade of the slab including machine cut edges ( Appx. Size 600x600mm)

P/F of sand stone jali of Bansi Pharpur as per inclosed drawing and design of 50 mm thick and height of jali is 630mm. The size shown in the drawing is for referance and minor deviation may occur as per site condtion. Jali shall be fixed in stone pillars by white cement, pigments etc. rates are for complete item. carving work required is of high quality. (As per quality of stone of PhaseIImay be seen by contractor before quoting price)

P/F sand stone ( of even shade ) pillars made up of Bansipaharpur stone having size and design as per inclosed drawing. Work including fixing of jali in pillars with all materials etc. complete in all respect. Size of pillar 100x100x900mm

P/F of sand stone bansi pharpur(pink) Chhatri as half portion ( size of half portion is 2.6m x 1.55m x 4.0m) complete in all respect including carving stone pillars of 150x150mm, stone chhaja 450mm wide, arches 75mm thick and including half dome with carving with stone kalash etc. as per direction of incharge as per design/photo enclosed.

Supply and fixing SS Railing (grade 304 ) with 2" SS pipe for outer frame and 1" SS pipe for inter mediat vertical support with 4" SS square pipe for vertical pillar complete with all necessasory fittings. In direction of Engineer Incharge.

Supply, Installation & Commissioning of Centrifugal Recirculation Pump with 105 CU M/Hr Delivery Capacity at 1 meters suction lift & 20 M Delivery Head with 12.5 HP Electric Motor working on 400/440 V, 50 Hz , 3 Phase Electric supply with coupling & base frame etc complete 10HP Texmo & fountain with G.I. pipe neccesary fitting 50mm dia bending in shape as per drawing & nozzles to be fixed at site for fountain as per inclosed drawing with required pound box including neccesary fiting.

Bidder Name

Amount

DASHRATHSINGH SHAKTAWAT

ASHOKA TRADERS

DASHRATHSINGH SHAKTAWAT

ASHOKA TRADERS