Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.3 LAccepted-AOC | L1 | Accepted-AOC being L1 bidder | |
| 2 | L2₹18.9 L+₹45,729 (2.48%)Rejected-Finance 05 BABA PALACE MUSRIGHARARI JANDAHA ROAD MUSRIGHARARI SAMASTIPUR BIHAR 848101 | SAMASTIPUR | BIHAR | 848101 | L2 | Rejected-Finance not become lowest bidder | |
| 3 | L3₹19.2 L+₹75,434 (4.09%)Rejected-Finance 01 NEAR GOVERMENT HOSPITAL KOTHI BAZAR ROAD KOTHI SATNA MADHYA PRADESH 485666 | SATNA | MADHYA PRADESH | 485666 | L3 | Rejected-Finance not become lowest bidder | |
| 4 | L4₹19.9 L+₹1.5 L (7.98%)Rejected-Finance | L4 | Rejected-Finance not become lowest bidder | |
| 5 | L5₹20.0 L+₹1.5 L (8.28%)Rejected-Finance CIVIL LINE MATATILA ROAD TALBEHAT DISTT LALITPUR U P | TALBEHAT | LALITPUR | U P | L5 | Rejected-Finance not become lowest bidder |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
11 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Sunny Kumar Attri
Garrison Engineer Jhansi
REPAIR/MAINT AND UPKEEPING OF E AND M INSTALLATIONS UNDER AGE B/R-II AT GE JHANSI
2024_MES_661205_1
GE/JHA/TOK/60 OF 2024-25
Open Tender
Civil Works
Item Rate
180 days
GE Jhansi
As per NIT and tender documents
9 documents required · 9 mandatory
₹500
Yes
GE Jhansi
₹60,000
Yes
10 Sept 2024
21 Jun 2024
13 Jul 2024
21 Jun 2024
11 Jul 2024
5 Jul 2024
21 Jun 2024 - 4 Jul 2024
Amount
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in same colour grout to match with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.
M&L for light shade Vitrified ceramic coloured tiles 8 to 10mm thick (Square or rectangular) polished,area of each tile not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in same colour grout to match over and including 15 mm thick screed bed or bedding layer in CM 1:4 including dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed.
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in same colour grout to match with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in same colour grout to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.
M&L for Glazed ceramic coloured tiles of size 350 mm x 250 mm x 7mm / 450x350x7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in same colour grout to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.
Demolition of plain cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level).
M&L for 75 mm thick cement concrete type D2 1:4:8 (using 40 mm graded stone agg) in sub base of flooring/ hard standing complete all as specified and as directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using rubber mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;
M&L for factory made rubber mould, chequered cement concrete tiles in floor of any colour 30 cm x 30cm x 20 to 22 mm thick, set & jointed and pointed in neat cement slurry mixed with grey cement and pigments, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as directed.
M&L for heavy duty, coloured exterior heavy duty tiles 400mm x 400mm x 8 to 10 mm thick, for path over including 20 mm thick screed bed in CM (1:4),as per sample kept in GE office, complete all as specified and directed.
PCC 1:2:4 Type B-1 {using 20mm graded crushed stone aggregate} as in coping/benching including weathering, slightly rounded or chamfered angles and throating etc including necessary form work incl demolition of existing cement concrete of any description complete all as specified and directed.
Dismantling Asbestos Cement Corrugated or Semicorrugate sheet in Roof covering complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick AZ 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F for pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed.
Dismantling timber scantling 40 Sqcm and over in section in any position as in unframed works such as roof purlins, rafters, fillets ,ridges etc as in ceiling complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
S&F mild steel (Fe 410W, Gde E 250) as roof trusses (framed), trussed, purlins, crane gantries ,rails and fastenings and heavy brackets framing (beams, tee, angle, channels or flat sections) etc complete all as specified and directed .
Dismantling post or struts (wood steel or RCC) any section, including taking out embedded portion and making good disturbed ground, post embedded in natural ground complete all as specified and directed .
S & F mild steel joints angle channel or tee section and fix independently in concrete as fencing post and similar works congorming to Fe 290 Gde E- 165 including all necessary drilling, bolting or riveting etc complete all as specified and directed .
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
S & F mild steel screw bolts purpose made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed to be fitted with washers and one hexagonal or square nut, exc. 5cm long dia of shank 11 to 15mm complete all as specified and directed .
Dismantling barbed wire of any description and in any location complete all as specified and directed .
S&F 4.5mm dia MS galvanised chain link fencing of size 50 x 50mm or less of any type of standard, rail straining bolts etc including provision of binding wire as directed by Engineer-in-charge. Note :- For ascertaining weight of Chain link fencing per Sqm board shall be ordered by GE
M&L for MS round bars 10mm dia & over cut to length bent to shape required incl cranking bending spirally for hoping for colm and backing ends and binding with & include MS wire (a headed) not less than 0.9mm dia.
Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed
Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 sqm and n exc 4.00 sqm each complete all as specified and directed
Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed
S&F for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc of FE-290 (gde E-165) complete drilled for fixing of steel sheeting or other covering. doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering) and hanging: also fastening and fixing complete all as specified and directed
S&F for mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with ri-veted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed
M&L for MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles confirming to FE 290 Gde E-165 complete all as specified and directed
M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in bed blocks etc for embedding hold fasts complete all as specified and directed
S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR complete all as specified and directed
S&F Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as specified and directed
S&F 35mm thick 2nd class H.W. made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of door shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed
S&F 30mm thick 2nd class H.W. made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of window shutters as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed
M&L for box type steel window with 80x40x1.25 m MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using 12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified as directed. Note:- (a) The Glass / gauze shall be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick.
M&L for box type steel ventilator with 80x40x1.25mm MS tubular frame partly gauged with top hung shutter with and incl grill using 12mm square bars @ 10Cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified as directed. Note:- (a) The Glass / gauze shall be measured and paid separately. (b) Top hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick.
S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified as directed.
S&F of 30mm thick flush doors shutter, solid core construction, with partical board core and plywood face panel commercial type on both sides complete all as specified and directed.
S&F butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as specified and directed.
S&F butt hinges, 100 mm long, extruded aluminium alloy,with mild steel hinge pin anodised complete all fixed type C-21 specified and directed.
S&F butt hinges, 75 mm long, medium weight, cold rolled, mild steel complete all as specified and directed.
S&F butt hinges, 50 mm long, medium weight, cold rolled, mild steel complete all as specified and directed.
S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed
S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 125mm extruded aluminium alloy handles, fabricated type,anodised complete all as specified and directed.
S&F 100mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed
S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed
S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed
S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed
Hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed.
S&F 3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, complete all as directed.
M&L for preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed
M&L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc and including demolition of existing old cement concrete complete all as specified and directed
M&L for 40mm thick PCC type B1 1:2:4 (20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of existing old cement concrete floors etc complete all as directed.
Cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good exceed 20 cm girth in brick walls complete all specified and directed
M&L for 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.
M&L for 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.
M&L for Udaipur green marble work 18 to 20 mm thick (table rubbed and polished) as in flooring, steps, cooking platform and like with and including 20 mm thick cement screed bed in CM 1:6 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including rounding of edges of udaipur green stone and demolition of existing stone slab or tiles with screed bed of any description and in any position complete all as specified and directed.
S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed.
S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed.
S&F in replacement of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
S&F of Ball valve 15mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms complete all as specified and directed.
S&F of Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work built in cement or cement lime mortar etc complete all as specified and directed.
Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for rendering in two coats 15mm (10mm+5mm) thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth (without using extra cement) and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed Note- WPC will be measured paid as supply only under respective items separetely.
M&L for rendering 10mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for rendering 5mm thick plaster in CM (1:3) on concrete surface of ceiling finished even & smooth (without using extra cement) complete all as specifiied and directed.
M&L for preparation of new plastered surface and of wall and applying two coats of oil bound distemper, over chalk whiting primerand including a layer of 1.5mm thick wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed.
M&L for preparation of new plastered surface of wall and applying two coats of cement base paint ,over a coat of alkali resistant primer over outer surface of wall, complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
M&L for Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.
M&L for applying wall care putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall and applying one coat of acrylic interior emulsion, white or tinted on walls using mechanical means complete all as specified and directed.
M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old plastered surfaces on wall and applying one coat of Cement based paint complete all as specified and directed.
M&L for peparation of primed surfaces of wall / ceiling and applying one coats of weather proof exterior exterior emulsion paint complete all as specified and directed.
M&L for prepration of surfaces of wall / ceiling and applying Two coats of weather proof exterior paint over a coat of exterior primer complete all as specified and directed.
M&L for prepration of old floor surfaces of interlocking and chequered tiles applying one coats of acrylic floor emulsion paint complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.
S & F steel Rolling shutters without ball bearing as specified top cover, anchoring rod, hasp and staple, and one shop coat of red oxide primer complete push, pull or manual type, thickness of latch 1.00mm complete all as specified and directed.
S&F Ball bearing for rolling shutter complete all as specified and as directed by EIC.
S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed by EIC.
M/S BABA CONSTRUCTION (BID ID -3057962)
ADARSH ENTERPRISES (BID ID -3056031)
M/S AADI TRADERS (BID ID -3057717)
HARNAM SINGH ANIL SINGH (BID ID -3057795)
Khushi Muskan Engineer & Developer (BID ID -3052013)
M/S ADITYA ENTERPRISES (BID ID -3058157)
V K Engineers and Associates (BID ID -3057981)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .