UPGRADATION OF JOINERIES AT OMR KARNA BLOCK OMR 39 INDRA BLOCK AT DSSC WELLINGTON

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

Demolition of floor hearth or wall tiling laid bedded and pointed in any mortar (but not backing) complete all as specified and as directed

Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm complete all as specified and as directed

Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, complete all as specified and as directed.

Dismantling boarding/partition , any description, fixed in any position with screws all as specified and as directed

Material and labour for Rendering in Cement Mortar ( 1:6) 15 mm thick on stone masonry or other than fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new surfaces of walls and applying with white putty of average thickness 1mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of alkali resistant primer by approved applicator of the manufacturer of the paint and all as specified and as approved.

M&L for UPVC fixed ventilators of approved colour with glazing all as per manufactures direction and following sections:- (1) UPVC ventilator frame shall be made of UPVC material confirming to IS-10151 .The ventilator frame shall be made of extruded UPVC section having overall dimension of 60mm x60mm having wall thickness 2 mm +/- 0.1mm.Corners of wall frame shall be jointed by MS galvanised brackets joints mitred and plastic welded.The hinge side vertical outer frame shall be reifnforced with galvanised MS tube of wall thickness 1mm +/- 0,1mm and the tie rod shall be provided at the bottom of the frame . (2) Glazing shall be provide with 5mm thick frosted glass fixed with appropriate size beading as per manufactures specification. Make : Madhu Industries / AMD overseas Ltd/ Fenesta/Qute/Sarvesh Multi Plast India Ltd /SMP Impex/H2O Solution.

Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, incl Glazing shall be provided with 5 mm thick Plain / frosted glass fixed with appropriate size beading as per manufacturer's specifications and Stainless steel wire mesh 0.36mm nominal dia and average width of aperature 1.40mm shall be provided with each window shutter, complete all as specified and as directed . Make : Madhu Industries / AMD overseas Ltd/ Fenesta/Qute/Sarvesh Multi Plast India Ltd /SMP Impex/H2O Solution. Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. ® PER SQUARE METRE S & F Material only .

Supply and fix UPVC Partition consisting of 7mm thick coloured solid UPVC ply sheet reinforced with frame work made from 60mm x 60mm Casement frame including necessary drilling,jointing and fill the gap with necessary solvent,and fixing all required cleats,brackets ,channels etc all as specifed and as directed. Make : Madhu Industries / AMD overseas Ltd/ Fenesta/Qute/Sarvesh Multi Plast India Ltd /SMP Impex/H2O Solution. Note : Partition shall be designed according to the approval of GE and the cost shall be deemed with cost of neccesary glass/PVC panelling according to the design)