CERTAIN B R AND OTHER CONNECTED E M WORKS AT CERTAIN BLDG IN KANJOLI LINES AND DAYAL BAGH AND COMPREHENSIVE REPAIR TO BLDG INCLUDING E M ITEMS AT GE OFFICE, BSO CIVILIAN KEY PERS STN HQ SEC HOSP AND OTHER CERTAIN BLDGS AT KANJOLI LINES BHARATPUR MIL

Amount

Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises, complete all as specified.

M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified.

M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified.

M&L for glazed ceramic tiles in vertical surface of size 450x300x7 mm thick, laid over and including 15 mm thick rendering in cement mortar (1:3) and set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles, complete all as specified.

M&L for 20-25 mm thick kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20 mm thick screed bed in CM 1:6, complete all as specified.

M&L for 18 - 20 mm thick black machine cut granite slab (of any type) (table rubbed and polished), as in steps, jambs, pillars, window- cills, cooking platform set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab laid over and including 15 mm thick cement screed in cement and sand mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

Demolition of cement concrete (unreinfored) in ground floors and pavings nexc 15 cm thickness (below or above ground levels) complete all as specified.

M&L for 100 mm thick PCC 1:2:4 type B-1 (using 40 mm graded stone aggrgate) finished even and smooth without using extra cement complete all as specified.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/path laid in panel surface finished even and smooth without using extra cement complete all as specified.

M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and othe similar bands, plinth courses, bed plates, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified .

Demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc, complete all as specified.

M & L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6.0 metre mean radius as wall built in cement & sand mortar 1:6, complete all as specified.

Dismantling asbestos cement/galvalume/fibre glass (corrugated or semi corrugated) sheets in roof coverings, complete all as specified.

Pre painted galvalume alumimnium zinc coating GI based corrugated steel sheet 0.50 mm thick, sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified .

Pre painted galvalume alumimnium zinc coating GI based plain steel sheet 0.50 mm thick sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified .

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified.

Dismantling timber scantlings 40 Sqcm and over in section from unframed work, complete all as specified.

Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section from unframed work, complete all as specified.

S&F rolled mild steel work as in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. conforming to Fe-410W Gde E-250 quality 'A', complete all as specified.

M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165, complete all as specified.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified.

M&L for cement concrete type C-2. 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified.

S&F GI tubing medium grade ISI marked galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm including taking down existing steel tubing and connections complete all as specified.

S&F GI tubing medium grade ISI marked galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm including taking down existing steel tubing and connections complete all as specified.

S&F in repair vitreous china wash down water closet (Pedestal pattern) white excluding (flushing cistern and flush pipe), complete all as specified.

S&F in repair vitreous china squatting pan,Órissa pattern size 580 x 440 mm white, with integral foot rest and CI 'P' trap complete all as specified.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, 10 lit capacity with inlet, ball valve, float and handle including brackets complete all as specified.

S&F in repair Vitreous China wash hand basin, white, flat back, size 550x400mm including brackets & waste pipe of PVC 32 mm bore of low or high density complete all as specified.

S&F pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, with or without lettered "Hot" or "Cold" suitable for 15 mm nominal bore iron pipe, screwed for iron pipe and fixed complete all as specified.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S & F 500 ltr Capacity ISI marked three layer, white colour, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position & including 20 mm brass ball valve complete all as specified including dismantling existing water tank.

M & L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified.

S&F welded steel wire fabric ,weight n. exc 4.00 kg/sq. m fixed to steel members complete all as specified.

Taking down cement or cement lime plaster of any description from brick or stone masonary walls ceiling including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified.

M&L for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and fair without using extra cement, complete all as specified.

M&L for rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of concrete surfaces as in ceiling including finishing the surface even and smooth without using extra cement, complete all as specified.

M&L for rendering 15 mm thick on fair faces in cement and sand mortar 1:4 on brick work or cement concrete surfaces including finishing the surface even and fair complete all as specified.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper white or tinted over one coat of water based white pigmented alkali resistant priming paint, over 2 mm thick wall care putty on Wall Surface including all necessary arrangement for execution of work complete all as specified.

M&L Preparation of newly plastered surfaces of ceiling & applying three coats of oil emulsion distemper white or tinted complete all as specified.

M & L Preparation of new decorated plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of Exterior emulsion over a coat of alkali resistant primer complete all as specified.

Taking down chowkats or frames n. exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified.

S&F 30 mm thick Flush Shutters, Solid core construction, Single or double leaved rebating shall be square or splayed, with block board core and both face is covered with plywood face panels commercial type free from twist or wrap in plane, complete all as specified.

S&F factory made, 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc.( without sash bars ), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc., sizes of members of shutters as specified 8.24(a) in SSR Part I complete as as specified.

S & F Solid PVC Door Frame of the size 50 x 47 mm made out of 5 mm PVC sheet. The door profiles are to be reinforced with 19x19mm M.S Square tube. The profile shall be cut and mitred at two corners and joined by inserting 2nos. of 150mm long brackets of 15x15mm M.S. square tube inside the 19mm x 19mm M.S. square tube and suitably screwed complete all as specified.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified & shown in SSR (Part-II) 2020 complete all as specified.

S&F MS butt hinges medium weight cold rolled of size 100 mm, complete all as specified.

S&F SS hinges medium weight size 100 mm, complete all as specified.

S&F aluminium anodised, barrel tower bolts of extruded section, 125 mm length of bolt and fixed with screws, complete all as specified.

S&F 200 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete as as specified.

S&F Aluminium handles, cast type, anodised of 125 mm size complete all as specified.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples or rivets, complete all as specified and as directed.

M&L for Painting to new or prevously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chrome primer including preparation of surfaces complete all as specified.

M&L for preparation of new or prevously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Demolition & breaking up drain pipes AC, (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 100 mm/75 mm complete all as specified.

S&F PVC (SWR) pipe not less than 6 Kgf/sqcm rating single socketed, in any length with rubber ring joints including clamps of FI 40x3 mm fixed bolt 8 mm drilled to wall, in walls, type 'B' ISI marked of 110 mm bore complete all as specified.

S&F PVC (SWR) pipe not less than 6 Kgf/sqcm rating single socketed, in any length with rubber ring joints including clamps of FI 40x3 mm fixed bolt 8 mm drilled to wall,in walls, type 'B' ISI marked of 75 mm bore complete all as specified.

S&F PVC (SWR) bend of 110 mm bore with access door of any radius complete all as specified.

S&F PVC (SWR) bend of 75mm bore with access door of any radius complete all as specified.

Cutting or uprooting grass incl removing old mud phuska/ roof treatment of any thickness and description, removing rubbish off the premises, cleaning surface and preparing to receive new treatment complete all as specified.

M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in roof surface finished even and fair complete all as specified.

M&L for 20 mm thick screed bed or bedding layer of cement mortar 1:4, finished even and smooth without using extra cement complete all as specified.

Providing and laying APP(Atactic Polypropylene polymer) modified prefabricated five layer 4mm thick water proofing membrane,black finished reinforces with nonwoven polyester matt consisting of a coat of bitumen primer of bitumen membrane @ 0.40 litre/sqm by the same membrane manufacturer of density at 25 degree C 0.87-0.89 Kg/litre and viscosity 70--160cps.Over the primer coat the layer of membrane shall be laid using Butane torch and seiling all joints etc and preparing the surface complete. The vitalphysical and chemical parameters of the membarane shall be as under: Joint strength in longitudinal and transvrese direction at 23 degree C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membarane not less than 150 degree C. Cold flexibility shall be up to -2 degree C when tested in accordance with ASTM,D complete all as specified.

M/L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 15mm thick screed bed in CM 1:6 complete all as specified.

S & F 1000 ltr ISI marked three layer, white colour, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position & including 20 mm brass ball valve complete all as specified including dismantling existing tank.

M&L for Painting to new or prevously untreated steel surfaces of any description n exc10 cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chrome primer including preparation of surfaces complete all as specified.

M & L for Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc., complete all as specified.

S&FPowder coated Anodised aluminium window/ ventilator shutters side hung type with sash, aluminium section weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150 mm long (1 No) suitable , type B-21 hinge 100 mm long (2 No), suitable handle (1 No) etc for each leaf, complete all as specified.

S&F Powder coated Anodised aluminium door shutters with aluminium section weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, 02 Nos aluminium handle each door, 03 Nos, 100mm long hinges, anodised aluminium snap beading screws etc in each shutter complete all as specified.

S&F aluminium deco grill in door and windows with weight not exceeding 1.00 Kg/Sqm including necessary arrangement for fixing etc as specified.

S&F 4.80 mm thick sheet glass with solar control film 25 micron reflective type sticked to glass pane ,ordinary quality exc 0.5 Sqm in each pane complete all as specified.

S&F Door closer hydraulically regulated designation No 2, univeral type, of aluminium (extruded section body), suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified.

S&F 100 mm mild steel 4 lever mortice lock vertical type of size complete all as specified.

Taking down carefully copper/aluminium point wiring (light, fan, bell,same board, independent or power) complete fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials and making good disturbed surfaces of wall, floor & ceiling etc complete all as specified.

Dismantling of old U/S sub main wiring and service wire of any size & make complete all as specified.

Dismantling of old U/S rusted main switch/DB of any size capacity and make complete all as specified.

M&L concealed point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in PVC conduit pipe size not less than 20 mm dia with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface and making good the disturbed surfaces of wall/ceiling by means of Wall putty and matching colour of existing wall, PVCsleeve/dash fastners with cadmium plated screws including suitable size of PVC boards/ sunken box for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm PVC insulated FRLS unsheathed copper earth continuity conductor to common earth and connected to earth dolly complete all as specified for the following :-

One light point controlled by one way switch.

One fan point controlled by one way switch.

One 3 pin 6 Amp socket point outlet on the same board with other switches.

One 3 pin 6 Amp socket point outlet on the independent board.

One bell/buzzer point controlled by one push button.

All as per item No 77 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified.

S&F ceiling rose surface bakelite three terminal ISI marked including suitable size of PVC board complete all as specified.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type multi purpose flush type 230 volt complete all as specified.

S&F switch piano flush button single pole one way 6 Amps 230 volt grade complete all as specified.

S&F switch piano flush button single pole one way 16 Amps 230 volt grade complete all as specified.

S&F socket 3 pin 16A, flush type complete all as specified.

S&F bell push flush type 5 Amps 230 volts grade complete all as specified.

M&L bell multi musical type 230 volts grade complete all as specified.

S&F in repair step type electronic fan regulator EME type 100 watt complete all as specified.

M&L concealed submain wiring complete with 10 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 10 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit size not less than 25 mm dia with all PVC accessories complete all as specified. Note: Two runs of 10 sqmm and one run of 10 sqmm earth conductor and PVC conduit pipe shall be measured as one length only.

M&L concealed submain wiring complete with 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 6 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit size not less than 20 mm dia with all PVC accessories complete all as specified. Note: Two runs of 6 sqmm and one run of 6 sqmm earth conductor and PVC conduit pipe shall be measured as one length only.

M&L concealed submain wiring complete with 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 4 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit size not less than 20 mm dia with all PVC accessories complete all as specified. Note: Three runs of 4 sqmm and PVC conduit pipe shall be measured as one length only.

Supply and fix of distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt, 415V of the following DBs:-

4 way TPN with busbar 415 volts (double door) complete all as specified.

8 way SPN with 200 amps rated busbar 240 volts (double door type) complete all as specified.

4 Way SPN with 200Amp rated busbar 240V (Double door type) complete all as specified.

S&F in repair MCCB's, MCB's of following capacity :-

MCB TPN 63 Amps 415 volt, Category- C curve, 10KA rapturing capacity and ISI marked complete all as specified.

MCB TPN 32 Amps 415 volt, Category- C curve, 10kA rapturing capacity and ISI marked complete all as specified.

MCB SP 6-32 Amps, 240 volts,Category- C curve, 10kA rapturing capacity and ISI marked complete all as specified.

MCB SPN 40-63 Amps, 240 volt,Category- C curve, 10kA rapturing capacityand ISI marked complete all as specified.

Supply and fixing in replacement of 20 watt LED tubelight fitting retro fit type 4Xfeet long with replacable rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified.

Supply and fixing in replacement sensor based 20 watt LED tubelight fitting batten type 4 X feet long with rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified.

S&F in repair lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all incl 9watt LED lamp complete all as specified.

S & F in repair street light GI bracket of 0.6 mtr long made out of 32/40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 04 Nos MS clamp of F.I 40X6mm including nuts bolts & washers complete necessary fixing arrangements on pole complete all as specified.

S&F in repair 35/36 watts LED street light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source connecting with 2.5 sq mm solid aluminium conductor PVC insulated twin core weather proof cable from fittings to jucntion box and fixing to complete all as specified.

S&F in repair LED light fitting 14 W,230V decorative wall mounting type with multicolour ABS housing with poly carbonate rings and glass shade with lamp holders & Bulb with connector block,etc complete with all accessaries pre wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

Supply and fixing in repair LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified.

Supply and fixing in repair round/square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

S&F sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 20 Amps, 240 volts complete all as specified.

Supply & fix in repair 4 way VTPN Distribution Board (with provision for MCCB as incomer & MCB as outgoing) for suitable ofb MCCB with suitable bus bar & Prewired complete all as specified.

S&F in repair on existing location including taking out of existing MCCBs of following capacity :-

(a) MCCB 415 volts 100 Amps 04 pole 16 KA Thermal maganatic, breaking capacity not less than 16 KA,415 volts.

S & F or laying galvanised steel tubing Medium grade (ISI marked) of size 40mm bore grounting in wall for hanging of ceiling fan with proper fixing of hanging clip & finishing of wall complete all as specified.

S & F in replacement 4 sqmm solid conductor 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable flat or circular from Junction point to fitting complete all as specified.

M & L in repair for Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 2.25 Mtr below the ground level with the top edge of earth plate, depth not less than 1.50 Mtr below the ground level connected to GI earth wire 4mm dia by means of bolts, nuts and washers protected by GI tubing light grade 15 mm dia uptoTest point, 20 mm dia GI watering pipe medium grade with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates with 8 mm reinforcement bors @ 15 cm c/c bothway complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in soft/loose soil ,removal of surplus sil and providing charcol dust & salt layers all around the earth plate upto 15 cm complete all as specified. (Note:- Up to7.5Mtr length of pipe of 15 mm dia and GI wire shall be deemed tobe included in unit rate quoted by tenderer GI pipe and GI strip beyond 7.5) will be measured separately under respective item.

Excavation in trenches, n. exc 1.5 Mtr wide and n. exc 1.5 Mtr in depth for foundation/laying of cable and getting out in soft/loose soil complete all as specified.

Returning, filling in including spreading, levelling, watering and well ramming in layers n. Exc 25 cm thick complete all as specified.

Removing of excavated soil to a distance n. Exc 50 Mtr and depositing where directed at a level n. Exc 1.5 Mtr above the starting point complete all as specified.

Supply & spread unwashed dry river sand for sand cushioning for covering the under ground cable in trenches complete all as specified. (Note :- Punning thickness shall be measured.)

M&L for cable protection cover with sub Class`B` bricks old size laid dry, flat perpendicular across the cable in trenches complete all as specified.

Supply, laying, testing & commissioning of LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes or fixed on pole of the following sizes:-

(a) 16 Sqmm 4 core

(b) 10 Sqmm 2 core

(c) 6 Sqmm 2 core

M/s Ranaji Construction Co (BID ID -3340122)

Tulsi Enterprises (BID ID -3347931)

m/s meetu enterprises (BID ID -3348285)

B R ENTERPRISES (BID ID -3348165)

Swastik Engineering Works (BID ID -3339927)

krishna Associate (BID ID -3338460)