STMC of NH-02 of I-K Road km272.49 to km287.00 Total Length 14.51km

Amount

Clearing grass and removal of rubbish upto a distance of 50 meters outside the periphery of area cleared (i) (By manual means)

Hill Side Drain Clearance (Removal of earth from the chokod hill side drain and disposing it on the valley side manual)

Land Slide Clearance in soil (Clearance of land slides in soil and ordinary rock by a bull-dozer D 80 A-12, 180 HP and disposal ofthe same on the valley side)

Dismantling of flexible pavements (Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 1000 meters, stacking servicable and unservicable material) (ii) By mechanical means (A) Bituminous Courses

Prime Coat on WMM / WBM Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.

Tack Coat on Granular surfaces treated with primer Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Dense Graded Bituminous Macadam Grading - II Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. (a) VG-40.

Tack coat on Bituminous surfaces Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom

Bituminous Concrete (Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clauseNo. 507 complete in all respects for Grading-I ( 13 mm nominal size) (a) VG-40

Plain/Reinforced cement concrete in Open foundation complete as per drawing and Technical Specifications B) PCC Grade M20 (ii) PCC Grade M20 using batching plant & Manual placing

Retro-reflectorised Traffic signs (Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class B Type-IV retro reflective sheeting fixed over 2mm thick bluminium sheeting vide clause 801.3,3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min25 x 25 x 3mm . Angle mounted on a mild steel circular pipe 65NB , 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67. (iv) 60 cm equilateral triangle

Retro-reflectorised Traffic signs (Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class B Type-IV retro reflective sheeting fixed over 2mm thick bluminium sheeting vide clause 801.3,3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min25 x 25 x 3mm . Angle mounted on a mild steel circular pipe 65 NB , 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67. (viii) 60 cm circular