Work of Overhauling Calibration Testing and commissioning of Pyrometry Instruments

Complete Overhauling, Testing and Re-commissioning of K-type thermocouple of size 160 mm to 400 mm with termination of cable at both end with proper ferruling and dressing. (i) BFP 11A, 11B & 11C working oil –03Nos. (ii) Ball Mills- 6 X2 =12 Nos. (iii) Main steam temp (L/R)- 02 Nos. (iv) Boiler 13 M to 36 M – 22 Nos. (v) Boiler 42 to 48 M – 19 Nos. (vi) Turbine -4 M to 9 M – 67 Nos.

Complete Overhauling, Testing and Re-commissioning Yokogawa recorder-02 Nos . (paper less) and Fuji recorder – 01 Nos.

Complete Overhauling, testing and Re-commissioning of K-type thermocouple of size 1250 mm by providing protection pipe with flange by carring out cutting and welding work with termination of cable at both end with proper ferruling and dressing. (i) Hot PA duct to mills -2X6 = 12Nos. (ii) PA temp at APH inlet/outlet (L/R)-06 Nos. (iii) Secondary air temp at APH inlet/outlet (L/R) = 08 Nos. (iv) Flue gas temp at APH (L/R)- 2X7 = 14 Nos. (v) Flue gas temp at ID 11A & 11B outlet -02 Nos.

Complete Overhauling, testing and Re-commissioning of S-type thermocouple of size 1000 mm by providing protection pipe with flange by carring out welding work with termination of cable at both end with proper ferruling and dressing. (i) PSH(L/R), RH(L/R), & Conv SH (L/R) -06 Nos.

Complete cleaning, testing and Re-commissioning of K-type thermocouple (MI type) of S.H and R.H tube metal temp of boiler with-out head of size 05 M to 15 M with termination of cable at both end with proper ferruling and dressing at boiler 42 to 48 M.

Complete cleaning, testing and Re-commissioning of K-type thermocouple (MI type) of Turbine metal temp (IPT, HPT, Lower flange, upper flange, Top, bottom and studs) with-out head of size 05 M to 10 M with termination of cable at both end with proper ferruling and dressing .

Complete Overhauling, cleaning & making them perfectly sealed by gasket & gland, Replacement of T.B , ferrule and lugs of Junction Boxes. (i) ID, FD & PA – 2 X 3= 06 Nos. (ii) APH (L/R) – 04 Nos. (iii) Bowl Mills – 06 Nos. (iv) MTM J.B (Boiler 42 to 48 M) – 10 Nos. (v) Turbine -4 to 9 M – 12Nos.

Complete Overhauling, testing ,Calibration and Re-commissioning of Temp switch of size 5 to 15M with termination of cable at both end with proper ferruling and dressing. (i) ID, FD and PA – 20 Nos. (ii) BFP 11A, 11B & 11C working oil – 03 Nos.

Removal of gauge from site, its complete Overhauling, Calibration, testing and Re-commissioning of Temp gauges at site. (i) Boiler side – 15 Nos. (ii) Turbine side – 60 Nos.

Complete checking, testing, Maggering and commissioning of RTD (PT-100) with termination of cable at Junction Boxes and in UCB. 1. Capsule type :- (i) Bowl Mill motor winding temp – 6 X 6 = 36 Nos. (ii) Bowl Mill motor bearing temp (DE & NDE)- 2 X 6 = 12 Nos. (iii) Turbine Bearing Temp – 08 Nos. (iv) Thrust Pad, Surge Pad, seal babbit temp& H2 gas coolers – 28 Nos.. (v) Generator – 72 Nos.

Complete overhauling, testing, Maggering and commissioning of RTD (PT-100) with termination of cable at Junction Boxes and in UCB. 1. Thermocouple type :- (i) Turbine Drain oil – 07 Nos. (ii) BFP 11 A,11B & 11C bearing temp – 3x10 = 30 Nos. (iii) Turbine lub oil temp – 01 No. (iv) Condensate (Inlet & out let) and cooling water of condenser( inlet & out let)- 04 Nos. (v) LPT/IPT exhaust Temp-04 Nos.

Complete overhauling, Calibration and Re-commissioning of Single/double channel digital Temp Indicators (Pyrotech Make).

Fabrication of Boxes for ID fan 11 A & 11 B temp switches of size 80X36X110 cm at Id fan ‘3’ M with 04 Nos. inspection window fitted with non breakable glass of size 6” X 6”, T.B stand, 02 Nos. mounting stand, gland hole arrangement as per side requirement with locking arrangement and fixing it on suitable stand (Height 2 ft/as per side requirement), painting and writing tag name.

Cleaning and Painting of FD and PA temp switches boxes and minor repairing for locking arrangement and inspection window for making them perfectly sealed by gasket & gland, Replacement of T.B , ferrule and lugs and inspection window

Laying/ Patrolling of control cable of size 2C to 20C X 0.5mm to 1.5 mm as per side requirement

M/s SUN WORLD PROCESS ENGINEERING

INSTRUMENT ERECTORS