Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.2 LAccepted-AOC | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹36.1 L+₹85,382.40 (2.42%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹37.7 L+₹2.5 L (7.17%)Rejected-Finance C 56 6 ANAND VIHAR COMMERCIAL COMPLEX MAHOLI ROAD MATHURA UP PIN 281004 | MATHURA | UTTAR PRADESH | 281004 | L3 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 4 | L4₹38.8 L+₹3.6 L (10.2%)Rejected-Finance | L4 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 5 | L5₹38.8 L+₹3.6 L (10.2%)Rejected-Finance | L5 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
₹42.9 L
EMD Value
₹85,900
Closing Date
26 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST MATHURA
Garrison Engineer East Military Engineer Services Mathura Cantt Mathura 281001
SPECIAL REPAIR TO BLDG NO P-43 AT BP LINES UNDER GE EAST MATHURA
2022_MES_548323_1
8200-1294/E8
Open Tender
Civil Works
Item Rate
180 days
GE EAST MATHURA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE EAST MATHURA
₹85,900
11 Oct 2022
29 Aug 2022
28 Sept 2022
29 Aug 2022
26 Sept 2022
14 Sept 2022
29 Aug 2022 - 19 Sept 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.
M&L 50 mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in levelling course for flooring complete all as specified and as directed.
M&L for Non skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M&L for Glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10 mm thick backing coat of cement mortar 1:3 complete all as specified and as directed.
M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed.
M&L for preparation of old decorative surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.
M&L for providing 1 mm thick wall care putty on plastered surfaces of wall to achieve smooth finish complete all as specified and as directed.
Taking down Cement plaster of any description on brick work or concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 10 mm thick on ceiling surfaces in cement mortar 1:3 finished even & fair complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and fair complete all as specified and as directed.
M&L rendering 15mm thick on other than fair face of brick work in CM 1:4 mixing liquid water proofing compound as per manufacturers instructions and surface finished even and fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.
Supply only Liquid water proofing compound of approved make complete all as specified and as directed.
M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat shall be applied after 4-6 hrs of first coat, out of the surface before providing plastering compete all as specified and as directed. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit/STP/CICA etc. as approved by Engineer-in-Charge.
M&L prepration of new plastered surfaces of walls and providing wall care putty not less than 1mm thick to achieve smooth surface and applying two coats of oil bound distember over a coat of alkali resistant primer using spray machine, spray hard to reached area to achieve excellent application using limited manpower complete all as specified and as directed.
M&L prepration of new plastered surfaces of walls/ceilings and applying two coats of weather proof acrylic exterior paint dark shade over a coat of primer (100% Acrylic) with spray machine, spray hard to reached area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
M&L for prepration of new plastered surface of ceilling and applying three coats of white wash complete all as specified and as directed.
S&F in repair 25 mm dia stainless steel alloy tubular drapery rod cut to size and fixed in position including fixing brackets,stops end caps etc. complete all as specified and as directed.
Dismantling of Asbestor cement (Corrugated, semi corrugated) sheets in roof covering including ridges, hips, valleys etc completed all as specified and as directed.
S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre- painted galvalume aluminium zinc coating GI based steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutters, fixed with self tapping screw complete all as specified and as directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surounding wall using nylone sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with cnnecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.
Dismantling timber scantlings 40sqcm and over in section, (Framed work) in any position complete all as specified and as directed.
M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and as directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.
M&L for 20mm thick Granite (of any type) work any colour as specified (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like and including in cement mortar (1:4) pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.
S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete as specified and as directed.
Taking up or down 15 mm bore steel tubing and connections including disconnection of fittings and cleaning for refixing where required or removed from site complete all as specified and as directed.
Taking up or down 20mm bore steel tubing and connections including disconnection of fitting and cleaning for refixing where required or removed from site complete all as specified and as directed.
S&F mild steel tubes 15mm bore medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F mild steel tubes 20mm bore medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F Hand jet health faucet 15 mm bore with 8mm dia & 1.2 mtr long flexible tube and wall hook with all connected fittings complete all as specified and as directed. Make :- JAQUAR /KOHLER/GROHE.
S&F in repair Bib cock with wall flange 15mm bore dia complete all as specified and as directed. Make:- Make :- JAQUAR /KOHLER/GROHE.
S&F in repair Angular stop cock with wall flange 15 mm bore dia complete all as specified and as directed. Make:- Make :- JAQUAR /KOHLER/GROHE.
S&F in repair Bip tap with long body 15mm bore standard of CP any colour screwed for iron pipe & fixed complete all as specified and as directed. Make :- JAQUAR /KOHLER/GROHE.
S&F in repair Pillar taps fancy type15mm bore of CP any colour screwed for iron pipe & fixed complete all as specified and as directed. Make :- JAQUAR /KOHLER/GROHE.
S&F in repairs wall mixer with connector including hand shower arrangement with connecting legs, wall flanges and wall bracket for hand shower complete all as specified and as directed. Make :- JAQUAR /KOHLER/GROHE.
S&F in repairs Hand shower (ABS brass chromium plated body) with 8mm dia and 1.20mtr long flexible tube & wall hook complete all as specified and as directed. Make :- JAQUAR /KOHLER/GROHE
S&F in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and as directed.
S&F in repairs, vitreous chinaware wash hand basin white flat back size 545x400mm excluding taps, waste, chain but including brackets waste coupling and waste pipe complete all as specified and as directed.
S&F in repair OVERHEAD shower (with Arm) dia 200 mm round shape single flow (body and face plate stainless steel with chrome finish ) with rubit cleaning system complete all as specified and as directed. Make :- JAQUAR /KOHLER/GROHE.
S&F in repair any colour european type combination pattern WC casket type Christinna with mounted flushing cistern, PVC connection,seat cover and jointed to sewage pipe complete all as specified and as directed. Make:- Cera /Hindware /Parryware
M&L in repair sink mixer with EXTENDED swinging spout (wall mounted model )with connecting legs and wall flanges complete all as specified and as directed. Make:- JAQUAR /KOHLER/GROHE.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm including fixing complete all as specified and as directed.
S&f in repair 2 way bib cock of superior quality with wall flange 15 mm dia including fixing to pipe complete all as specified and as directed. Make :- JAQUAR /KOHLER/GROHE.
S&F in repairs concealed stop cock 15mm bore dia reduced body with adjustable Wall Flange for pipe of 15mm bore complete all as specified and as directed. Make :- JAQUAR /KOHLER/GROHE.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. Make :- JAQUAR /KOHLER/GROHE.
S&F in repair Towel Rack 600 mm long with lower Hangers complete all as specified and as directed. Make :- JAQUAR /KOHLER/GROHE.
S&F in repair brass chromium plated Towel Rail 600 mm long complete all as specified and as directed. Make :- JAQUAR /KOHLER/GROHE.
S&F Waste coupling of PTMT (half or full threaded) for 32mm bore dia of discharge pipe (min. weight 32mm-45gms) complete all as specified and as directed.
S&F Bottle trap of PTMT for 32mm bore dia of discharge pipe having min. water seal of 25mm (min. weight 32mm-260gms) complete all as specified and as directed.
S&F Grating doom 100 mm dia of PTMT (minimum weight 25 gms) complete all as specified and as directed.
S&F Towel Ring of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 90 gms) complete all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.
S&F vitreous china coloured tolilet paper holder, box type to walls with CP brass screws and plastic gutties complete all as specified and as directed. Make :- JAQUAR /KOHLER/GROHE
S&F in repair Corner glass shelf with bracket fixed to wall complete all as specified and as directed. Make:- Make :- JAQUAR /KOHLER/GROHE
M&L for Aluminium frame power coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
M&L for 5 mm thick sheet glass ordinary quality and glazing with aluminium beading n exc 0.50 sqm in each pane complete all as specidfied and as directed.
M&L Powder coated anodised aluminium (thickness of powder coating not less than 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised powder coated aluminium snap beading, screws, powder coated aluminium anodised fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.
M&L for aluminium anodised barrel tower bolts 75mm long of extruded section and fixed complete all as specified and as directed.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each complete all as specified and as directed.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and as directed.
S&F 30 mm thick factory made flush shutters, solid core construction with block board core and plywood face panel both face covered with decorative face venner with lipping/frame on both sides complete all as specified and as directed.
S&F 35 mm thick glazed and skeleton shutters of 2nd class HW, open rebated and prepared to receive glass/gauze etc edges or framing plain, chamfered or rounded fitted with cut or mitred beads for securing glass etc size of members and shutters as specified in SSR Part-I section and clouse 8.20 (a) complete all as specified and as directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening complete all as specified and as directed.
S&F factory Made Solid PVC Moulded with partical core Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.
S&F in repair 110 mm bore PVC (SWR) bends any radius with oval access door complete all as specified and as directed.
S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.
S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with suitable MS clamps complete all as specified and as directed.
S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, fixed on walls with suitable MS clamps complete all as specified and as directed.
S&F in repair plate rack made of stainless steel sheet 1mm thick, overall size 900mm x 750mm x 255 mm fixed on wall with CP screws and plastic gutties complete all as specified and as directed.
S&F in repairs floor door stopper of brass body, and tongue with hard drawn steel spring overall length of cover plate 150mm complete all as specified and as directed.
S&F 18 mm thick Rajshri solid PVC Kitchen PVC Sheet one side prelam sheet kitchen/cupboard cabinet shutter of density 600 kg/cum bent at 90 degree as per modular kitchen and finish all edges at level for making edge lipping/bending or 0.5 mm thick PVC sheet lipping at all four edges using bonding lape etc complete all as specified and as directed.
S&F Factory made Rajshri PVC Cabinet of required size fabricated by joining 12 mm thick PVC celuka ply fixed with each other using solvent cement fixed with screw and solvent cement adhesive etc complete all as specified and as directed.
S&F 18mm thick factory made Rajshri PVC shelf/ partion of required size consisting of panel of celuka PVC ply and for supporting the hold of shelf /partion and shall provided 3 edges in size18 mmx 18mm as per required lengththe front side of the edge visible in the front of the shelf /partion to be edge lipped by 18 mm widthx1mm thick PVC sheet of density 600 kg/cum manufactured complete all as specified and as directed.
S&F Magnatic catcher (KTS-20) full extension load capacity 8 kgs complete all as specified and as directed. Make : KAFF/GODREJ/HETTICH
S&F stainless steel handles, cast type polished bright of 100 mm size for kitchen cabinet shutters complete all as specified and as directed. Make - KAFF/Godrej/Hettich
S&F extruded stainless steel handles, cast type polished bright of 150 mm size for cupboard shutters complete all as specified and as directed. Make-KAFF/Godrej/Hettich
S&F auto closing hinges 35 mm of 0 crank( KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed. Make- KAFF/Godrej/Hettich
S&F stainless steel Tower bolt 150 mm size for kitchen cabinet shutters complete all as specified and as directed. Make-KAFF/Godrej/Hettich
S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps 40mm (When open) complete all as specified and as directed.
S&F stainless steel 304 grade kitchen modular baskets for storage of plates, cups, grain basket, glass cutlery, bottles etc as per required size complete all as directed.
Dismantling PVC celuka ply or insulation board including all fitting of kitchen cabinet complete all specified as and directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thick (above or below ground level) complete all as specified and as directed.
M&L 100 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base, sub-floor, floor, hardstanding etc complete as per and as direction.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
Demolition of brick masonry built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed.
M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with closed top) hoisted and fixed in position 1000 liters capacity including connections and dismantling existing old u/s water storage tank complete all as specified and as directed.
M&L for providing precast cement concrete type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in louvers and jallies 35mm thick (measured solid) including all mouldings set in CM 1:4 complete all as specified and as directed. Note : Reinforecement shall be measured and paid separatly.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, laying of cables and getting out in soft/ loose soil complete all as specified and as directed.
Returning, filling in soft/loose soil including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.
Removing of excavated materials to a distance exc 50 m but nexc 100 mm and depositing where directed a level n.exc 1.5 mtrs above the starting point complete all as specificed and as directed.
Demolition and breaking up drain pipes of size 150mm bore (salt glazed ware, AC or reinforced concrete) set in cement motar including cement concrete bedding and haunching complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C-2 bed to 150mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.
M&L for Salt glazed stoneware drain pipes 150mm bore, grade 'A' laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed.
Construction of Soakage, well of size 1.80m x 3.00m deep including excavation PCC in foundation Honey combed and solid brick work in CM, RCC slab covers, filling with brick bats, plastering/painting, returning filling and removal of surplus soil to distance n. exc 50m and deposited where directed all as shown in TD drawing complete of size 1.80 mtr dia and 3.0 mtr deep as per drawing complete all as specified and and as directed
M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregaes) an in foundation of manholes etc complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, benchings etc complete all as specified and as directed.
M&L for MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for MS TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per item serial No 105 here-in-before but MS round bar 10 mm dia and over as in handles of manhole covers complete all as specified and as directed.
M&L for precast cement concrete B1 1:2:4 (using 20 mm graded aggregate) as in cover slabs for manholes etc including necessary form work complete all as specified and as directed. Note : Reinforcement shall be measured and paid separately.
M&L for precast cement concrete B1 1:2:4 (using 12.50 mm graded stone aggregate) as in slabs supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. Note : Reinforcement shall be measured and paid separately.
M&L for providing precast cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in louvers and jallies 40mm thick including all mouldings set in cement mortar 1:4 complete all as specified and as directed. Note : Reinforcement shall be measured and paid separately.
Taking down cement plaster on brick or stone masonry wall etc incl racking out joints hacking for key, scrubbing down with water etc as in internal and external surfaces of man holes, septic tank, filter bed etc including removing debris complete all as specified and as directed.
M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finishing the surfaces even & smooth without using extra cement complete all as specified and as directed.
M&L for rendering 10mm thick on other than fair faces of brick or concrete surfaces and finishing the surfaces even & smooth in CM 1:6 without using extra cement complete all as specified and as directed.
Dismantling of brick (laid flat or on edge) on brick tiles in floor, channel, kerbs, apron etc (Each layer) complete all as specified and as directed.
Dismantling of existing roof treatment consisting of screed, tar felts etc, and removal of dismantled materials complete all as specified and as directed.
M & L for brushing neat cement slurry with 3 kg of cement per sq. metre complete all as specified and as directed.
M&L for 10 mm thick bedding layer in cement mortar 1:3 using water proofing compound @ 3% by weight of cement or as per manufacturers instructions, on roof surface finished even and smooth without using extra cement complete all as specified and as directed.
Supply only of integral water proofing compound confirming to IS-2465-1075 complete all as specified and as directed.
M&L for applying cold bituminous primer @ 0.30 ltr/sqm conforming to IS-3381 and laying APP based Polymeric membrane minimum weight 3 Kgs/sqm and minimum thickness 3mm reinforced with polyster non wave fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed.
M&L for providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) in coping, coving, roof padding, padding in sunken slab mixed with liquid water proofing compound as per manufacturing instructions complete all as specified and as directed.
M&L for cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed with grey cement and pigment set jointed and pointed in neat cement slurry in floors and cut and polished laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.
Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for 50mm thick cement concrete type C-1 1:3:6 (using 20mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth using extra cement complete all as specified and as directed.
M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area using chemical chlorophyriphos or lindane emulsifiable concentrate 20EC conforming to IS:8944 or IS 632 complete all as specified and as directed.
M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per square meter of the perimeter wall using chemical chlorophyriphos or lindane emulsifiable concentrate 20EC conforming to IS:8944 or IS 632 complete all as specified and as directed.
M&L for treatment of soil under existing floors using chemical chlorophyriphos or lindane emulsifiable concentrate 20EC conforming to IS:8944 or IS 632, emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete as specified and as directed.
Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fitting etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed.
Taking down carefully by Submain wiring/ service connection of any type complete all as specifed and as directed.
Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap including MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and as directed.
M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed FRLS cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia medium grade) and its all accessories complete concealed in wall incl cutting & chases (making good all to the disturbed surfaces as per existing) and modular flush metal boxes including cover plate with frame for mounting modular switches, sockets, regulators,socket etc including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge , as described below:-
One light/fan/exhaust fan point controlled by one way Modular switch 5 amp complete all as specified and as directed.
One 3 pin 5 Amps socket point controlled by one Modular switch on same board.
One 3 pin 5 Amps socket point controlled by one Modular switch on independent board.
One bell point controlled by one push button on independent board.
All as per item serial No 128 but here-in-before for 3 pin/5 pin 16 Amps Modular sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent point wiring complete all as specified and as directed .
Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified and as directed.
Supply and Fixing Modular bell Push switch 6 Amps with indicator single pole one-way, 1 Module complete all as specified and as directed.
Supply and Fixing Modular switch 16 Amp single pole one way, 1 Module complete all as specified and as directed.
Supply & Fixing Modular fan Regulator electronic step type 2 Module complete all as specified and as directed.
Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps, combined 2 Module complete all as specified and as directed.
Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified and as directed.
Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified and as directed.
Supply and fixing Lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
Supply and fixing Bell Ding dong type, 230 Volts complete with connection complete all as specified and as directed.
Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x 9 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F LED Round/square surface mounted downlight 15watt, integrated electronic driver, colour warm white/cool white/natural white co-related colour temperature (CCT) of 6000K complete all as specified and as directed.
Supply & fixing decorative Wall light fitting brushed nickle finish with opal glass diffuser including 9 watt LED lamp B22 base complete with all accessories and including connection complete all as specified and as directed . Make:-Havells Cat Part No. FLORETINE WL 1LS B22 SS or equivalent make in Crompton/ Philips C&S.
Supply & fixing LED Decorative bed side light fitting 3W complete with all accessories, On /off inbuilt switch and including connection complete all as specified and as directed. Make : Havells or equivalent to Philips / Bajaj / CG or as directed as per site
S&F LED post top light fitting 30W IP-65 rated complete all as specified and as directed. Make : Surya Cat part No SLE PT 30W-ETPP or equivalent.
S&F SP enclosure with a two pin and earth plug and socket complete with SP MCB of rating 20 Amps, 240 Volts with all connection complete all as specifed and as directed.
S&F SP enclosure modular type with a two pin and earth plug and socket complete with SP MCB of rating 16 Amps, 240 Volts with all connection complete all as specified and as directed.
S&F in replacement LED bulk head with PDC aluminium housing and milky diffuser capacity 10 watt complete with all accessories and connection complete all as specified and as directed.
Taking down the ceiling fan/exhuast fan of any sweep carefully from its installed position, dismantling complete with down rod, repair/replacement of unserviceable parts (like as bearing, capacitor, burnt winding, rubber wheel bush etc) and cleaning of all dust, applying grease for bearings, reassembligh the fan and blades, painting of fans and down rod with synthetic enamel white paint by spraying single coat including filling cavities with filler, writing MES No with black paint, and keeping a side safely and hanging/refixing in position and connecting up including provision of 3 core twisted flexible copper conductor cable of 0.75sqmm from ceiling rose to connector of fan and testing on completion complete all as specified and as directed. Note : The spare parts (like as bearing, capacitor, rubber wheel push, fan winding etc) required shall be measured and paid separately under relevant items as supply only.
Supply only capacitors 2.5 MFD/3.5 MFD suitable for all types of fans complete all as specified and as directed.
Supply only rubber wheel bush and with GI bolt, nut, washer and split pin complete all as specified and as directed.
Supply and install of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified and as directed.
M&L for building security light bracket made out of 40mm dia medium grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer and taking down old unserviceable bracket as scrap any size/description complete all as specified and as directed.
M & L for Sub Main Wiring with two runs single core 10sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 10sqmm copper green colour earth wire complete all as specified and as directed. Note: Two runs 10sqmm, one run of 10sqmm earth wire & One run of PVC conduit shall be measured as one unit length.
S&F TP&N distribution board, 4 Way, Double door, sheet steel, phosphatised, powder painted with Copper bus-bar 200Amp, neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, complete all as specified including fitting suitable for MCBs with connection complete all as specified and as directed
S&F in replacement of MCCB FP 125 Amps,' C' series , bracking cap10 KA, 4 Pole, 415V complete all as specified and as directed.
S&F MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and as directed.
S&F MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and as directed.
S&F in replacement MCB SPN 40-63 Amps, 'C' series , breaking cap10KA, 240V complete all as specified and as directed.
S&F in replacement MCB SP 6 - 32 Amps, 'C' series, breaking cap 10KA complete all as specified and as directed.
Taking down carefully service connection of any type complete all as specified and as directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core, laid in trenches/duct/fixing on walls/poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole/Main Panel Box and testing complete all as specified and as directed.
Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor of size 50sqmm 3.5 core laid in trenches / duct / fixing on walls / poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and as directed.
S&F exhaust fan 250mm sweep sturdy engineer plastic body complete with louvers, AC 230 Volt single phase 50 Hz supply and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and as directed.
Supply and fix exhaust fan 300mm sweep steel body complete with blades, frame and louvers, AC 230 Volt single phase 50 Hz supply and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and as directed.
Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete all as specified and as directed.
Ahmed constructions
Ms Kamal Kant Agarwal
B R ENTERPRISES
brajcon
M/s Hoti Lal Contractor
Shiva Traders
ARCHI ENGINEERS
M/S PREETI CONSTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .