Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.1 LAccepted-AOC | L1 | Accepted-AOC Accepted as a first lowest | |
| 2 | L2₹2.6 L+₹51,595 (24.3%)Rejected-AOC | L2 | Rejected-AOC Reject due to second lowest | |
| 3 | L3₹3.0 L+₹85,030 (40.0%)Rejected-AOC | L3 | Rejected-AOC Reject due to third lowest | |
| 4 | L4₹12.4 L+₹10.2 L (481.7%)Rejected-AOC | L4 | Rejected-AOC Reject due to Fourth lowest | |
| 5 | Rejected-Technical | - | Rejected-Technical Does not qualify pre qualify condition no-03 |
Tender Value
Refer Docs
EMD Value
₹4,000
Closing Date
4 Feb 2021, 12:00 pmClosed
Superintending Engineer
Electricity Urban Distribution Circle
WORK OF O/E FOR RELEASE OF (1243.85 KW) 1400 KVA LOAD FOR RES. COLONY/ COMMERCIAL IN THE NAME OF M/S DITECH HOUSING BUILDING C/O SRI NEERAJ KR GUPTA S/O SRI INDRESH KR GUPTA, SITE AT GREEN PARK PRAMPARA-2 RAM GANGA VIHAR UNDER JUD OF EUDD-II, MBD
2021_PVVNL_544516_1
ST-16/EUDC(M)/2020-21
Open Tender
Electrical Works
Lump-sum
MORADABAD
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
Superintending Engineer, EUDC
₹4,000
Yes
28 Jul 2021
8 Jan 2021
4 Feb 2021
8 Jan 2021
4 Feb 2021
8 Jan 2021
Safe Carriage of 11/0.4 KV 250 KVA T/F. from Store Centre Majhola to worksite including loading and unloading.
Loading carriage of 3x185mm² 11 KV Cable 120 Mtr. From Store Centre Majhola to work site with its unloading.
Digging the pit and erection of Single Pole 11 mtr. long with fixing of X-Arm/ T-Channel and Guarding Angle with providing Clamps, Nut & Bolt etc., complete work.
Grouting of 11 Mtr. long Steel Tubular Pole poles ratio 1:4:8 cement, sand and brick ballast and in appropriate size including making plinth around the pole as per RESPO Norms.
Grouting of Earth Rods for making Earthing of poles, complete work.
Loading carriage of G.I. Wire-160 Kg., Angle, LT Cable 3.5x240mm²-105 Mtr. Outdoor Type Cable Boxes of size 3x185mm²-04 Nos. etc. from Store Centre, Majhola to Work site including its unloading. .
Fabrication of Guarding Angle with its fixing on double pole or single pole with providing Clamps, Nut & Bolts.
Laying, sagging & Stringing of G.I. Wire 3 Nos. with providing X-wire at every 5 mtr. distance for the guarding of 11KV Line, complete work.
Painting of Double Pole structure with one coat of ready mixed primer and two coats of ISI Mark Aluminum Paint after rubbing with sand paper to the surface of the structure including labour and T&P complete in all respect.
Painting of Single Pole structure with one coat of ready mixed primer and two coats of ISI Mark Aluminum Paint after rubbing with sand paper to the surface of the structure including labour and T&P complete in all respect.
Construction of plinth for 250KVA T/F. of size ( 2x2.5 x 1.10 ) mtr. above ground level and one ft. below the ground level of 9”. After excavation of 4” earth, brick ballast shall be provided and ramming will be done properly. After that a retaining wall of 9” width by first class brick in ratio 1:4 of cement and sand shall be made. The earth shall be filled up to one ft. below the top of the plinth. After this brick ballast shall be provided up to 6” from the earth level and proper ramming shall be done. One no. jall of 12mm MS tor shall be fixed in the hollow of plinth and one ft. thick RCC in ratio of cement, sand and stone ballast shall be laid on the top of the plinth. The 12mm thick plastering shall be done all around the plinth in 1:4 ratio of cement and sand. The contractor shall be responsible to complete the work as per direction of supervising Engineer.
Providing, fixing & grouting of corner angle of height 2.5mtr. long of size 50x50x6 for fencing, Fabrication of panel of fencing by making panel of 25x25x6mm, MS Angle fitted with square Wire mesh 1 mtr. width of best quality by electric welding as per requirement of site & providing 01 No. Gate of fencing made of MS Angle of 25x25x6mm fitted with wire mesh of width 1 mtr. with locking system, with its painting of green colour all around the plinth, complete work. (Wire Mesh, M.S. Angle, MS Flat of size 25x5mm and Nut & Bolts shall be provided by the contractor at his own cost.)
Digging the pit, fixing, grouting of Stay Rod and then fixing of Stay wire pole to Stay Rod with providing Stay Clamp, nut & bolt etc.
Boring and lowering by providing of G.I. Pipe size 35 mm dia, into the ground up to water level 30 ft. whichever is more, with the lower end of solid copper cone Approx.224mm long and 750gm in weight shall be provided and screwed in pipe as well as bringing out a continuous 25x6mm G.I. Strip for Transformer Neutral connection and T/F. body, complete work.
Placement and erection of 250 KVA T/F. complete work with ST Jumpering and LT Cable connections, complete work.
Providing M.S. pipe of dia 4 inch (for the 11 KV cable)
Laying sagging of 3x185 mm2 11 KV cable on the existing poles in double with fixing of outdoor type cable boxes at both ends.
Laying and fixing of LT cable from T/F to bus bar with providing of Copper Bus Bar.
Fixing and Jointing of outdoor type cable boxes with fixing of it at their place.
PREET ENGINEERING COMPANY
Singh Construction
Cosmic Enterprises
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .