Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.9 LAccepted-AOC 24B JYOTISH ROY ROAD KOLKATA 700053 | KOLKATA | WEST BENGAL | 700053 | L1 | Accepted-AOC Being a lowest bidder and reasonable | |
| 2 | L2₹51.1 L+₹1.2 L (2.31%)Rejected-Finance SAPTARAG APARTMENT RAGHUNATHPUR RAA 35 V I P ROAD KOLKATA 700059 | 24 PARAGANAS NORTH | WEST BENGAL | 700059 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹51.3 L+₹1.3 L (2.59%)Rejected-Finance ROOM NO B 111 PART III GANESH MURTINAGAR CAPT PRAKASH PETHE MARG CUFFEPRADE CALABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹52.4 L+₹2.4 L (4.81%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹52.9 L+₹2.9 L (5.84%)Rejected-Finance VILL SAROT PALLY PO SANKRAIL DIST HOWRAH PIN 711313 WB | SANKRAIL | HOWRAH | WEST BENGAL | 711313 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
21 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
REPAIR MAINT OF B/R EXTERNAL SERVICES AT BLDG NO O-2 AND O-4 COMPLEX INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA.
2023_MES_607181_1
8152/E8
Open Tender
Civil Works
Item Rate
150 days
GE(FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE(FW) Kolkata
₹96,000
10 Oct 2023
30 Jun 2023
22 Jul 2023
30 Jun 2023
21 Jul 2023
14 Jul 2023
Amount
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L brick work with Fly ash bricks old size brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L brick work with Fly ash bricks' old size brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.
Demolition of cement Concrete(reinforcement cut as required to facilitate demolition) Roof, floors (other than ground floors), beams, staircase, landing, chajjas and similar suspended work, complete all as specified and directed..
M & L RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and columns in floor, roof landing,, balconies ,canopies, deck slab and shelves etc complete all as specified and directed.
M & L providing pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in landing, cover slab for manholes etc, chullah, hoods, chajjas, water trough, mangers, shelves and similar articles with plan face including chamfered weathering, throating etc including necessary use and waste of form work complete all as specified and as directed.
Dismantling cast iron work of any description complete all as specified and as directed.
Taking down cement plaster on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L for 20 mm thick rendering in cement mortar (1:4), in two layers, each 10 mm thick, to fair faces of brick or concrete wall surfaces, top layer mixed with water proofing compound (@ 3 % by weight of cement or as per manufacture's instructions), finished rendering surface even and smooth(without using extra cement). (Note: Water proofing compound to be measured and paid separately as "Supply only")
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished rendering surfaces even and smooth (without using extra cement) complete as specified and directed.
M&L rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:4), mixed with liquid water proofing compound as per manufacturer's instruction, surfaces finished even and smooth without using extra cement complete all as a specified and as directed. (NOTE: Water proofing compound shall be measured and paid separately)
Supply only liquid water proofing compound all as specified and as directed.
M&L for application of damp proof painting in two layers as per manufacturers instruction in wall and ceiling surface including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified. Make: Smart care damp block-2K of Asian paints/Damp stop paint of Berger paint.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.
S&F in repair 35mm precast cement concrete type B0 1:2:4 using (12.5mm graded stone aggregate louvers and jallies including all mouldings set in CM 1:4, complete all as specified and directed.
M&L for RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and columns in floor, roof landing,, balconies, canopies, deck slab and shelves etc complete all as specified and directed.
Use and waste of formwork to sides and soffits of suspended slabs, floor slab, landing and similar work n. exc. 200 mm thick rough finished surfaces of concrete complete all as specified and directed.
S&F mild steel deformed bar 8 to 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M&L for TMT bar 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M&L for 20 mm thick screed bed or bedding layer of mortar as in backing coat of stone on fair face of brick wall or concrete surface in cement mortar 1:4 complete all as specified and directed.
M&L for 18 to 20 mm thick machine cut one side polished natural hard stone (Granite)any type in step, jambs, pillars, window cills, cooking plate from and similar places etc like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
All as per item No.21 above, but in vertical surface with 10 mm thick rendering in Cement Mortar 1:3 complete all as specified and directed.
M&L for Pre-polished chequered cement concrete tile (Coloured) 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
S&F Decorative ornamental Pre-cast Reinforced Cement Concrete type B0 (1:2:4) using 20 mm graded railing/ parapet post of size 150mm x150mm at base and top and 100mm dia at mid -section, of height 630mm . Set in cement mortar (1:4) including taking down old unserviceable post complete all as specified and as directed. Note: Reinforcement work shall deemed to be included in the unit quoted rate.
M&L for designer cement concrete tile of size 150mm x 75mm x 18 mm thick (with rainbow polymer based continuous tiles) in vertical surface such as skirting, dado laid over and including 10 mm thick screed bed in cement mortar 1:3 set and jointed in cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed. (Make: Ultra tiles, Model: EDEN or equivalent model in other approved make specified in tender)
M&L for designer cement concrete tile of size 227mm x 75mm x 8-10 mm thick in vertical Surface such as skirting, dado laid over and including 10 mm thick screed bed in cement mortar 1:3 set and jointed in cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed. (Make: Ultra tiles, Model: ULTRA BRIQUE or equivalent model in other approved make specified in tender)
M&L for designer cement concrete tile 18-20 mm thick any size as directed as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. (Make: Ultra tiles, Model: ORBIT/POLKA or equivalent model in other approved make specified in tender)
M&L for heavy duty coloured ceramic floor tiles of size 300 x 300x 10 mm thick, suitable for high traffic external tiles, anti skid, scratch resistance and neutral to UV rays and acid alkali resistance as in floor including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. (MAKE : JOHNSON, Model : ENDURA or equivalent model in other makes listed in the tender)
Demolition of cement concrete (un-reinforced) not exc 15cm thick in ground floor and paving (below or above ground level) complete all as specified and directed.
M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays, surface finished even and fair without using extra cement complete all as specified and directed.
M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth using without extra cement complete all as specified and directed.
M&L 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth using without extra cement complete all as specified and directed.
M&L for applying three coats of white wash with brush on newly plastered surface of walls including preparation of surfaces complete all as specified and directed..
All as per item No.34 above, but on ceilings, complete all as specified and directed.
M&L for applying two coat of oil bound distemper with roller on newly plastered surface of walls including preparation over a coat of alkali resistant primer applied over 1.5 mm thick water proofing wall putty on wall by brush and finish with roller complete all as specified and directed.
All as per item No.36 above, but on ceilings, complete all as specified and directed.
M&L for applying two coats of cement based paint with brush on newly plastered surface of wall including preparation and one coat of chalk white of surfaces complete all as specified and directed.
M&L for applying one coats of white wash with brush on old surface of wall including preparation complete all as specified and directed.
M&L for applying one coats of white wash with brush on old surface of ceiling including preparation complete all as specified and directed.
M&L for applying two coats of cement based paint with brush on old surface of wall including preparation complete all as specified and directed.
M&L for applying one coat of oil bound distemper with roller on old plastered surface of wall including preparation one coat of chalk white on wall by brush and finish with roller complete all as specified and directed.
M&L for applying one coat of oil bound distemper with roller on old plastered surface of ceiling including preparation one coat of chalk white on wall by brush and finish with roller complete all as specified and directed.
M&L for applying one coats of synthetic enamel paint on old painted wooden surfaces of any description over 10 cm width or girth complete all as specified and directed.
M&L for preparation and applying one coats of synthetic enamel paint on old steel surface of any description over 10 cm width or girth complete all as specified and directed.
M&L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces complete.
M & L Preparation of old treated/ painted surfaces of walls and soffits of Chajjas, roof slab etc, by cleaning brooming, rubbing and scrapping as required using broom, emery paper, putty blade/ scraper as applicable to make the surface free from loose paint, algae formation dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crackfill paste and applying one coat of weather proof exterior emulsion paint of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M & L Preparation of old surface of walls and soffits of Chajjas, roof slab etc, by cleaning brooming, rubbing and scrapping as required using broom, emery paper, putty blade/ scraper as applicable to make the surface free from loose paint, algae formation dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 2mm thick exterior wall putty for smooth finish and finishing with two coat of weather proof exterior emulsion paint over a coat of suitable exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M & L for complete removal with Jet washer of existing treatment on old painted surfaces of walls and soffits of Chajjas, roof slab etc, by using high pressure jet washer including cleaning the surface by scrapping as required using emery paper, putty blade/ scraper as applicable for removing loose paints corrosion, algae formation etc to make the surface clean and free from dust for upto 4 storey height including necessary scaffolding safety and protective measures complete all as specified and directed.
M & L for complete removal with vacuum sander of existing treatment on old painted surfaces of walls and soffits of Chajjas, roof slab etc, by scrapping and removing treated surfaces with mechanical wall sander (having vacuum mechanism for suction having minimum 1500 RPM sanding pad of 80 grit size having 7"-9" dia (as required) including cleaning watering to make the surface clean and free from dust for 5 to 8 storey building height including necessary scaffolding safety and protective measures complete all as specified and directed.
M & L preparing wood surfaces and wood based surfaces new or old of any description and girth treating ends of post, back of chowkhats etc area tarred exceeding 0.1 Sqm but not exceeding 0.5 Sqm each and treated with tar or coal tar black paint complete all as specified and directed.
S &F as in repair cast iron Grade FG 150 grating, railing, frame manhole cover fire and soot doors, dompers, stop valve box and similar articles etc (weight exc 3 Kg each ) including frame different size fixed in concrete cover as directed by Engr in Charge.
M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring benching to drain, coping, etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed.
Chipping of unsound weak concrete materials including cover plaster from RCC structural member i.e. Slabs, beams, columns , lintel, chajja, fin, facia, etc., 25mm average thickness including tapering all edges making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting including foreign materials ,loose concrete /aggregate etc and disposal of all debris outside of MOD land and complete all as specified and as directed by Engr-in-charge.
Material and labour of applying chloride free rust removing chemical on resting structural member and removing all rust from steel surface member by emery paper and cleaning the area thoroughly by water and allow it to dry and totally rust free of steel surface member and application two component epoxy zinc-rich primer over treat steel surface of minimum specific 1.75, adhesive bond strength with steel is 1.50N/mm2 all as complete as per manufacturer's instruction as specified and as directed. (Make: Rust removing chemical) Reebaklens RR for rust remover Nitozinc primer for primer of FOSROC or equivalents solutions SIKA/BASF/STP as approved by GE).
Material and labour for introducing new reinforcement bars upto 12mm dia for structural connection in RCC beams ,columns lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling fixing the reinforcement in position using epoxy cleaning of loose dust by blowing air sealing with epoxy cartridges etc all as specified and directed.
Material and labour for mixing and application of two competent structural grade polymer modified reinstatement mortar where local spalling has taken place or shuttering is not possible. The mortar can be applied in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimum compressive strength 12N/mm2 in 1 day and 45M/mm2 in 28 days Minimum flexural strength should be 8N/mm2 in 28 days .A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for Cementous system to be mixed with cement slurry before the application of micro concrete to be used @6 litre/bag of cement. The bonding agent should have minimum compressive strength 24N/mm2. The minimum tensile strength 3.5 N/mm2 minimum flexural strength 6.5 N/mm2 up to 25 mm average thickness up to any storied of bldg. complete all as specified and as directed. (Make: Fosrce/Pidilite/ STP/BASF/SIKA/Supreme Bituchem India P. Ltd)
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore as directed
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 150 mm bore as directed
S&F repair 100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed
S&F 100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed
S&F 150 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed
S&F in repair 100mm CI bends any radius complete all as specified and directed
S&F in repair 100mm CI bends (any radius),diminishing pieces or tapers (larger bore measured) any radius with oval access doors complete all as specified and directed
S&F in repair 100mm CI Tee equal size any radius with eye complete all as complete all as specified and directed
S&F in repair 100mm CI Tee equal size any radius with oval access doors complete all as specified and directed
Taking out of interlocking paver block, any shape or size and Re-laying the same after removing all vegetation, algae, grass etc, laid to proper slope & gradient over sand cushioning complete all as specified and directed. (NOTE: Sand, if required for correction of cushioning level will be measured and paid separately. Replacement of broken paver block shall be paid separately as "Supply only")
M&L for sand filling under floors or in foundation including watering and consolidation all as directed by Engr in charge
Supply and laying 60mm thick factory made chamfered edge precast glazed cement concrete paver block of M-50 grade confirming to IS 15658-2006 with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. (NOTE: Cost of sand cushioning is deemed to be included in the quoted rates)
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.
M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring benching to drain, coping, etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds mitered or stopped ends etc. complete all as specified and directed.
S & F as in repair RCPC (Reinforced Cement Polymer Concrete) grating slab on size 1200mmX450mmX75mm thick fixed in proper position complete all as directed by Engr in Charge
S & F as in repair RCPC (Reinforced Cement Polymer Concrete) grating slab on size 900mmX450mmX75mm thick fixed in proper position complete all as directed by Engr in Charge
S & F as in repair RCPC (Reinforced Cement Polymer Concrete) grating slab on size 600mmX450mmX75mm thick fixed in proper position complete all as directed by Engr in Charge
Taking up old manhole cover with frame (heavy duty) and raising / re-fixing in proper position, set in cement mortar 1:3 and haunching with PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) concrete surround finished even and smooth without using extra cement all as directed by the Engineer-in-Charge.
Taking up/down plants or vegetation growth wall upto roof level by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 Sqm cm superficial area and not exc one brick depth) using bricks bats / aggregate and plastering in cement mortar (1:4) to distributed portion and applying two coat of cement base paint to match the existing surfaces up to forth floor complete all as specified and directed by Engr in Charge.
Cleaning of existing covered / uncovered (partly / semi or fully filled up) drain, of any opening width and depth by removing and re-fixing of cover-slab (wherever applicable) taking out accumulated silt, mud, earth, rubbish, vegetation etc from the drain, washing of the drain with water and removing the same at any distance where directed as directed by KMC, complete all as directed by the Engineer-in-Charge.
Cleaning of sewage line of 300mm bore manually (by pushing a piece of bamboo split, tied with gunny bags at one end from one manhole to another manhole) or by pump including dewatering, desilting and well flushing the line with water complete as directed by the Engineer-in-Charge.
Cleaning of sewage line of 200 mm bore manually (by pushing a piece of bamboo split, tied with gunny bags at one end from one manhole to another manhole) or by pump including dewatering, desilting and well flushing the line with water complete as directed by the Engineer-in-Charge.
Cleaning of sewage line of 150 mm bore manually (by pushing a piece of bamboo split, tied with gunny bags at one end from one manhole to another manhole) or by mechanically operated pump including dewatering, desilting and well flushing the line with water complete as directed by the Engineer-in-Charge
Removal and disposal off of waste material / debries like broken stones, brick bats, tiles etc.,/ Soils in any position, from inside Fort William Camp area to out of MD land as any location catered by KMC, complete, all as specified and directed by Eng-in-Charge. Note: Volume of each laod / trip shall be considered for 4 Cum as Each load / Trip.
B & R CONSTRUCTION
M/S SRINIVASA CONSTRUCTION
DEYS ENTERPRISE
M/s Santosh Industrial Corporation
Rounaq Enterprise
M A ENTERPRISES
MODERN AGENCY
M/S SHRI P K ACHARJEE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .