Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹10.9 Laccepted-aoc | ₹10.9 L | accepted-aoc |
Tender Value
Refer Docs
EMD Value
₹15,700
Closing Date
6 Aug 2026, 5:00 pmClosed
Public Works Department
EXECUTIVE ENGINEER
Providing meeting table and Chairs, Sofa sets,VIP Chairs, roller blinds and other allied works to honorable vice chairman (Mysore division) Karnataka state guarantee implementation Authority at 514, 5th floor, 4rth stage, MS Building, Bengaluru.
PWD/2026-27/BD/WORK_INDENT38306
PWD/2026-27/BD/WORK_INDENT38306
Reserved
Buildings
Two Tender Document System(Two Cover)
PWD No.1 Buildings Division Office Bengaluru
₹500
₹15,700
8 Sept 2026
30 Jul 2026
7 Aug 2026
6 Aug 2026
Providing meeting table and Chairs, Sofa sets,VIP Chairs, roller blinds and other allied works to honorable vice chairman (Mysore division) Karnataka state guarantee implementation Authority at 514, 5th floor, 4rth stage, MS Building, Bengaluru.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doo...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...
Providing & fixing Roller blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as ...
Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking to the appropriate disposal area as per direction of Engineer-in-charge. Of sec...
Providing Sal wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...
Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xes,shelves,racks,almirah,cupboard and drawer etc. in...
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexpos...
Providing & Fixing of High Acoustical False Ceiling having NRC (Noise Reduction Coefficient) 0.90 (minimum) using Integral Densified edged Eco Friendly Fully Perforated Lightweight Calci...
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Providing and fixing bright finished brass hanging type floor door stopper
with necessary screws, etc. complete.
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
Providing and fixing bright finished brass butt hinges with necessary screws
etc. complete : 125x85x5.5 mm (heavy type)
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good...
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Providing and fixing Pillar cock with high neck with 265mm Extended body made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium
Providing and fixing 600x450 mm beveled edge mirror of superior Glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium
Providing and fixing Two seater Sofa with cushion of size 5(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer...
Providing and fixing Single seater Sofa with cushion of size 3(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engin...
Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered Glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate
Right angle Type Single unit: Providing and installation 75mm thick tile based Modular work station of 1200mm ht. Standard finishes shall be scratch and abrasion resistant. Plastic Components to be ma...
Providing fabricating and fixing wooden partition frame work consisting of 50mm X50mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the bottom and wall surface, the partition shall b...
Providing and Supplying of Executive Table finished with Approved Laminate with Right Side Cabinet includes 2 Drawers with Lock 1 Swivel Door with CPU Space includes Alloy Wire box with Cable Manager ...
Providing and Supplying of Executive High Back Mesh Chairs or equivalent make, with Head rest and multi lock, gas lift of Helix series of featherlite/Godrej or equivalent make, including cost of mater...
Supply and providing visitors chairs with fixed arms with sledge base of featherlite godrej or equivalent make, including the cost of all materials, labour and transportation, lead, lift etc., as per ...
Suppling and fixing C.P Health faucet. Inclding necessary acessories ect., complete. Cost including cost of all materials, labour and HOM of equipment with all leads complete.as per specificaitons (SE...
Providing Dewaan made of teak wood frames with teak wood legs, the size of the Dewaan is 600 x1800mm with approved design. The top is covered with 19mm thick block board. The mattress of Kurl-on make ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
38306 kw-1 CAT 1.docx
Tender Document • 1.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .