11-Naya Moradabad Yojana ke sec-07 evam 08 ke Madhya se Chaudharpur ko jaane waali 24M chauda mahayojana marg ka nirmaan karya. Bhaag-A

Cleaning jungle including up rooting of rank vegetation grass, bush wood, tres and spling girthe up to 30cms. Measurod at the height of 1M above ground level and removal of rubbish up to a distance of 50M outside the periphery of area cleared. (SOR 2022 ITEM NO.259)

Earth Work in cutting or in embankment in ordinary soil , excavation tobe in the form of regular pits not exceeding 1/2 meter(20") depth andearth work in embankment to be in 2 cm. (8") layers including rammingand dressing the surface to requred levels and slopes and also including1.50 M(5ft.)lifts and 30 M (100ft.) lead. The earth from cutting to be usedin 30M(100ft.) distance as directed by the engineer in charge cartage 8km distance SOR 2022 253(A)+231(a)

Excavation in foundation in ordinary soil (Loam,Clay or Sand) including lift upto 1.5 m lead upto 30 m and including filling watering and ramming of excavated earth into the tranches or into the space between the building & the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as direction by the /I. upto a distance of 30M from the foundation trenches. (PWD SI No-251)/2022

Construction of Granular Sub-Base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 By Mix in Place Method. MORTH AR

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. MORTH AR

Providing and applying Primer Coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.MORTH AR

Providing and laying Dense Graded Bituminous Macadam with higher capicity batch type HMP using crushed aggregates of specified grading, premixed with 60/70 (VG-30) bituminous binder @ 4.50 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects.AR

Providing and applying Tack Coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg/sqm on prepared bituminous surface cleaned with mechenical broom. MORTH AR

Providing and laying Bituminous Concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with 60/70 (VG-30) bituminous binder @ 5 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 507 complete in all respects.

Providing and applying 2.5 mm thick road marking strips retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. DSR-2023/16.62

Supply & Laying of Cat's eye complete

M-150 brick work in 1:4 (one cement and four coarse sand of 2.25 F.M. mortar) in foundation and including supply of all material and T &P etc. required for proper completion of work. (S.I. 307A)

12 mm. thick plaster with 1 : 4 (one part cement & Four parts of coarse sand of 2.75 F.M.) over brick work minimum thickness not to be less than 1 cms. Including supply of all material , labour , T & P etc. required for proper completion of the work. ( S.I.No.584)

Applying primer coat on plaster surface and paintng first two coat over prime coat with superiour synthatic enamel paint of stantdard make brushing to give an even shade and finished and including cleaning the surface all dirt, dust and foreign matter sand papring and strippping including cost matter and scoured with wire brushed fine steel/wood scappers sand parering and knotting including coat of all and supply of all meterial, labour and T&P S.I. No New Item 1(B)+2+4(iii)

Supply & Laying of 80mm thick Interlocking Tile I-Shape interlocking pavar block a with top layar of minimum 8mm thikness having plan dimension 200x(160+120mm) of O.P. cement, Smooth high class finish skid reditant manufactured rubber moulds through vibro-compression machanism. The compreddive strength of concrete pavar block shall not be less than 30 MPa (M-30) and wight 5kg per no confirming to IS: 15658-2006 including cost of material, labour T&P etc. required for proper completion of the work as directed by Engineer-in-charge. including laveling and dressing of surface to required lavel and slope, filling joints with local sand including the cost of all labour T&P etc. (GREY COLOUR)S.I. No. 51/P51 SOR 2022

P/L in Cement Concrete4:2:1 of not less than strength of M-150 stone ballast (20mm normal size) :2 approved coarse sand:1 cement ) and curing complete including cost of form work supply of all material lab T&P etc all complete.(SI.No-279 A.)