ADDN ALTRATION INCL REPAIRS TO OFFRS MD ACCN PRATAP LINE AT JAIPUR

Amount

Taking down cement plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish outside MD land complete all as directed.

Dismantling of cement concrete tiles,glazed tiles, terrazo tiles in floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles for credit from site and removing unserviceble tiles / rubbish outside MD land complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed incl removing the rubbish outside MD land as directed by Engineer-in-Charge.

Demolition of reinforced cement concrete any description as in roofs, floors (Other than ground floors), beams, staircases, landing, chajjas, slab, RCC water storage tanks & similar suspended work complete all as specified and directed incl removal all rubbish material out MD land as directed by Engineer-in-Charge..

M&L rendering 15 mm thick in CM 1:4 on fair faces of brick masonryor concrete surfaces finished even and smooth without using extra cement complete all as specified and directed..

M&L rendering 15 mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair faces of brick masonry finished fair & even where birla puttiy has been provided, complete all as specified and directed. Note:- Birla putty has been measured and paid in respective item of BOQ

M&L 15mm thick rendering in cement mortar in two layer first layer 10mm thick in CM 1:6 top layer 5mm thick plaster in CM 1:4 using liquid water proofing compound as per manufacturer instructions to stone masonry wall surfaces or surfaces other than fair faces of brick wall surfaces finished fair & even etc complete all as specified and directed. Note :- Supply only liquid water proofing compound shall be paid and measured in respective item of BOQ.

M&L rendering 10 mm thick in CM 1:3 on concrete surface of ceiling finished even and smooth without using of extra cement.complete all as specified and directed

M&L rendering 10mm thick in CM 1:3 n exc 3.00 sqm each patch in ceiling finished even and smooth without using extra cement complete all as specified and directed

Taking down and re-fixing after easining to shutters of any description exceeding 1 sqm and n.exceeding 2 sqm each in the same opening as directed and specified.

Roughning of surfaces of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc complete all as specified and directed.

M/L for brushing neat cement slurry with 3.00 kg of cement per sqm complete all as specified and directed.

M & L for 5-7 mm thick screed bed of chemical adhesive (Make specified in Appendix 'B') of approved make for laying floor finishes i.e. floor tiles etc.

M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.

M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. Set & jointed in neat cement slurry & jointed in coloured cement to match the colour of tiles over & including 15mm th screed bed in cm 1:6

M&L for non skid coloured ceramic tiles 9 to 10mm thick (square / rectangular) (matt finish)area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc laid over approved chemical mortar adhessive to match with coloured tiles complete all as specified and directed. Note : (M&L of adhessive shall be measured & paid seperately)

M&L for light shade full body vitrified ceremic tiles 9 to 10mm thick (square / rectangular) area of each tile n exc 0.36 sqm in floor etc set and pointed in neat cement slurry and pointed in white or coloured cement to to match and laid over approved chemical mortar adhessive to match with coloured tiles complete all as specified and directed. Note : (M&L of adhessive shall be measured & paid seperately)

M&L for coloured light shade full body vitrified tiles 9-10mm thick(square/rectangular) area of each tile not exc 0.36 sqm on vertical surfaces as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick rendering in CM (1:4) all as specified and directed.

M&L 15-16mm thick Granite work (table rubbed & polished) (Rajasthan black) in window-cills etc over & incl 15 mm screed thick in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite, complete all as specified and directed.

M & L for 10 mm thick rendering in CM 1:4 on stone masonary surfaces or surface other than fair face of brick masonary surfaces for fixing wall tiles etc complete all as specified and directed.

M&L coloured Glazed ceramic tiles in verticle surface (300x600mmx7mm) thick, (digital tiles) in dado etc laid in concept/pattern using highlighters set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and directed .

M&L coloured Glazed ceramic tiles of size 600 x 100x 7-8mm on vertical surfaces as in skirting etc set and jointed in neat cement slurry complete all as specified and directed by Engineer-in-Charge.

M&L for grinding/cutting old Kota stone surface rubbing and polishing with (bee wax polish) complete all as specified and directed.

M &L18-20 mm thick machine cut Udaipur green pre polished marble stone slab as in steps in single piece laid over approved chemical mortar adhesive and jointed with grey cement mixed withpigment to match the shade of marble. Note- Chemical mortar adhesive shall be measured & paid separately

M &L machine cut Udaipur green polished marble stone slab 18-20 mm thick as in risers laid over approved chemical mortar adhesive and jointed with grey cement mixed withpigment to match the shade of marble. Note- Chemical mortar adhesive shall be measured & paid separately

M&L 15-16 mm thick Granite work (table rubbed & polished) in cooking plat forms & edges in single piece over marble slab of thickness 12 mm(Torrento)/kota stone slab of 20-25mm thick (Torrento) glued with approved adhessive (Araldite) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite. (Note : 12 mm thick marble/20-25mm thick kota stone slab shall be measured & paid seperately)

M&L for 12mm thick marble slab as in cooking platforms as base to granite top placed on vertical marble partitions fixed with approved adhesive (Araldite) complete all as specified and directed.

M&L for 20 to 25mm thick kota stone slab as in cooking platforms as base to granite top placed on vertical marble partitions fixed with approved adhesive (Araldite) complete all as specified and directed.

M&L for 25mm marble slab as in vertical partitions , below kitchen cooking plat form and raised platform of kitchen, under kitchen platform fixed with approved adhesive complete all as specified and directed.

M&L for 12mm marble slab as in raised plat form of kitchen platforms laid over and including bedding 10mm thick CM 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of marble all as specfied and directed.

Rounding to edges of stone slab ( granite) two edges such as in cooking platform complete all as specfied and directed.

S & F 18 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa'/Green lam ply one side white laminate and other side decorative as in modular kitchen/ cabinets processed in factory to cutsize fixed with minifix hardware as required including PVC edge band 22 mm wide 0.80 mm thick (of REHAU or equivalent)of matching colour on exposed surfaces of board fixed with polymaster adhessive of REHAU make or equivalent including trimming edges of edge band to true line of thicknesss of board by manual trimmer,fixed to wall etc complete all as directed

S & F 8 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa'/Green lam ply one side white laminate and other side un decorative as in back of kitchen cabinetsand processed in factory to cut size complete all as specified and directed.

S & F kitchen plain baskets of stainless steel size 17" x20" x 4" of grade SS-304complete all as specified & directed. (Make : Godrej, Hindware, Lifetime)

S & F kitchen prerforated cutlery baskets of stainless steel size 17" x20" x 4" of grade SS-304 complete all as specified & directed. (Make : Godrej, Hindware, Lifetime)

S & F kitchen cup & saucer baskets of stainless steel size 17" x20" x 4" of grade SS-304complete all as specified & directed. (Make : Godrej, Hindware, Lifetime)

S & F kitchen plate baskets of stainless steel size 17" x20" x 6"of grade SS-304 complete all as specified & directed. (Make : Godrej, Hindware, Lifetime)

S & F kitchen grain baskets of stainless steel size 17" x20" x10" of grade SS-304 complete all as specified & directed. (Make : Godrej, Hindware, Lifetime)

S & F stainless steel basket guide channels suitable for running basket of grade SS-304 as mentioned in item 36-40 above complete all as specified & directed. (Make : Hettich or equivalent)

S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed. Make Nebco or equivalent

S & F 4 mm thick glass not exc 0.5 sqm in each pane as in cabinet shutters fixed with beads of approved make complete all as specified & directed

S & F in repair kitchen sinks made of stainless steel sheet 1mm th of grade SS-304 incl washer, brass sink coupling, waste pipe, connecting union cantilever cast iron brackets etc, bowl size 495 x 420 x160 mm fixed in kitchen granite top incl cutting granite/ marble of cooking platform and making good disturbed surfaces complete all as specified & directed.

S & F in repair kitchen sinks made of stainless steel sheet 1mm Grade SS-304 incl plug, washer, brass sink coupling, waste pipe, connecting union, cantilever cast iron brackets , bowl size 450 x 600 x230 mm fixed in kitchen granite top incl cutting granite/ marble of cooking platform and making good surface to disturbed surface complete all as specified & directed.

Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Taking up or down 25 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.

S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.

S&F 25 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.

Fixing only 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed. Note :- (GI tubing Obtained from item No 46 here in before)

Fixing only 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed. Note :- ((GI tubing Obtained from item No 47 here in before)

Fixing only 25 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed. Note :- ((GI tubing Obtained from item No 48 here in before)

S&F in repair bib taps 15mm bore cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. (Cat Part No : 35037PM) Make : Jaquar or equivalent catpart of makes specified in Appendix 'B'.

S&F in repair bib taps 15mm bore 2-in-1 cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. (Cat Part No : 35041PM) Make : Jaquar or equivalent catpart of makes specified in Appendix 'B'.

S&F in repair kitchen mixer 15mm bore cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union for kitchen complete all as specified and directed. (Cat Part No : 5309N) Make : Jaquar or equivalent catpart of makes specified in Appendix 'B'.

S&F in repair sink cock 15mm bore cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. (Cat Part No : 5347N) Make : Jaquar or equivalent catpart of makes specified in Appendix 'B'.

S&F in repair WHB mixer single lever 15mm bore swan neck cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. (Cat Part No : 35011BPM) Make : Jaquar or equivalent catpart of makes specified in Appendix 'B'.

S&F in repair brass CP towel rail 60 cm long square complete all as specified and directed. (Cat Part No : 35711PS) Make : Jaquar or equivalent catpart of makes specified in Appendix 'B'.

S&F SS towel ring square including Chromium plated brass screws & plastic rawl plug complete all as specified and directed. (Cat Part No : 35721P) Make : Jaquar or equivalent catpart of makes specified in Appendix 'B'.

S&F Soap dish, CP brass square fixed to plugs with chromium plated brass screws complete all as specified and directed. (Cat Part No : 35731P) Make : Jaquar or equivalent catpart of makes specified in Appendix 'B'.

S&F in repair Brass chromium plated shower rose 150mm x 150 mm size with or without swivel joints, any size, including fixed to steel pipe or union complete all as specified and directed. (Cat Part No : 1605) Make : Jaquar or equivalent catpart of makes specified in Appendix 'B'.

S&F in repair Brass chromium plated shower arm 15mm size,including fixing to steel pipe or union complete all as specified and directed. (Cat Part No :47913005) Make : Jaquar or equivalent catpart of makes specified in Appendix 'B'.

S&F in repair brass CP water spout 15mm bore (Tap) complete all as specified and directed. Cat No : 35429PM Make : Jaquar or equivalent catpart of makes specified in Appendix 'B'.

S & F in repair 15 mm dia Angle valve, cast copper alloy chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed. (Cat Part No : 35053PM, Jaquar) or equivalent catpart of makes specified in Appendix 'B'.

S & F in repairs, PTMT alloy bathroom cabinet with mirror of overall size 300 x 450mm complete all as specified and directed.(Make Prayag or equivalent).

S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15mm bore gate valve gun metal screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 20mm bore gate valve gun metal screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 25mm bore gate valve gun metal screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed.

S & F wall mixer brass hot & cold, 15mm bore (Concealed body Diverter complete ) with connection to overhead shower, bright finish ,screwed the ends for iron pipe and plugging complete all as specified and directed. Cat No : ALD 079 Make : Jaquar or equivalent catpart of makes specified in Appendix 'B'.

S & F concealed brass CP diverter exposed part complete all as specified and directed. Cat No : KUP35079 KPM Make : Jaquar or equivalent catpart in Marc and Kohler

S & F 250 mm Corner Glass shelf with brass brackets all as directed by Engineer-in-Charge.

S&Fin repairs vitrous china squatting pan of size 580 x 440 mm (Orrisa pattern), white with integral foot rest (excluding flushing cistern & flush pipe) including cast iron 'P' or 'S' trap and connection to trap antisyphonage pipe and making good to floor complete all as specified.

S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .

S&F vitreous China white single piece WC (European type) incl inbuilt vitreous china cistern size 360X640X680mm complete all as specified and directed . Cat No :SLS6853-S Make : Jaquar or equivalent catpart of makes specified in Appendix 'B'.

S&F brass CP health faucet 1.2m chain complete all as directed. Cat No : 573 Make : Jaquar or equivalent catpart in Marc and Kohler

S&F brass CP toilet paper holder with flap complete all as directed. Cat No : 35753PS Make : Jaquar or equivalent catpart in Marc and Kohler

S&F in repairs vitreous china wash hand basin white flat back size 560 x470 mm excluding taps, waste, chain & plug and porcelene stopper but including brackets /fastners, cutting for and pinning in ends of brackets but exclussive of fixing of supply and waste pipe complete all as specified and directed. Cat No : 39801 Make : Jaquar or equivalent catpart of makes specified in Appendix 'B'.

S & F 32 mm bore brass CP grating with long shank for wash hand basin. Cat No: 705 Make : Jaquar or equivalent catpart in Marc and Kohler

S& F 32 mm bore PVC waste pipe 75 cm long of approved make (Prayag or equivalent)

S&F brass CP bottle trap 32mm. Cat No : 7691300X190 Make : Jaquar or equivalent catpart in Marc and Kohler

S&F in repair bib taps 15mm bore cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. (Cat part No- MQT-512, Make-Jaquar) or equivalent catpart in Kohler or Grohe

S & F in repair 15 mm dia stop cock, cast copper alloy chromium plated , fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed (Cat part No -APR -101053, Make-Jaquar) or equivalent catpart in Kohler or Grohe

S & F in repair 15 mm dia stop cock ( concealed type) , cast copper alloy chromium plated , fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed (Cat part No -APR -101053, Make-Jaquar) or equivalent catpart of makes specified in Appendix 'B'.

S&F in repair swivel shower rose (min wt 40gm) any size with shower arm 15mm size 195mm long with band of 45 degree with flange of PTMT (min wt 40gm) including fixing to steel pipe or union complete all as specified and directed.

Supply & fix towel rail 450mm long of PTMT fixed with & including cp brass screws & wooden/plastic cleats (min wt 170gm) complete all as specified.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material outside of MD Land complete all as specified and directed.

M & L brick work using Subclass B bricks in exc. 6 m mean radius on plan built in cement mortar 1:6 complete all as specified and directed.

M & L brick work using Subclass B bricks in exc. 6 m mean radius on plan built in cement mortar 1:4 complete all as specified and directed.

M & L brick work in half brick thick wall using Subclass B bricks built in cement mortar 1:4 complete all as specified and directed.

M&L for random rubble uncoursed stone masonary well bonded , bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

M&L for keyed pointing to random or polygonal rubble or uncoursed or brought to up to courses in CM 1:4 complete all as specified and directed.

Dismantling of 75mm bore cast iron soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

Dismantling of 100mm bore cast iron soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallls complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors.

S&F75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallls

S&F 110 mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal

S&F 110 mm dia PVC (SWR) bends any radius

S&F 75mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal

S&F 75mm dia PVC (SWR) bends any radius

S & F 110 mm dia PVC (SWR) bends with ducks foot

S&F PVC (SWR) reducers (110 x 75) mm

S&F 110 mm PVC (SWR) vent cowl

S&F 75 mm PVC (SWR) vent cowl

S&F PVC (SWR) 75 mm dia of outlet nahani trap/floor trap with grating including jointing with solvent cement complete all as specified and directed.

S& F Salt glazed stoneware gully traps of size 150x150 , square or round mouthed, type‘P’ complete all as specified and directed.

S&F PVC clamps for rain water , soil, waste pipe incl bolts if required for securing/ holding in position pipes of dia 75 mm complete all as specified and directed.

ditto- but for pipes of dia 110 mm

S & F MS CP Grating doom 125 mm dia with waste hole complete.

S & F MS CP Grating doom 125 mm dia complete.

Dismantling water tank of capacity Exc 500 litres and not exc 1000 litres.

S&F 500 litres, rotational moulded polyethylene five layered water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position incl connecting pipes, nipple/ sockets etc complete all as specified and directed..

S&F 1000 litres, rotational moulded polyethylene five layered water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position incl connecting pipes, nipple/ sockets etc fixed complete all as specified and directed by Engineer-in-Charge .

S&F in repair 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed. .

S & F 35mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both faces with lipping/frame to match, fixed with approved adhessive incl lipping all round the edges of door as per manufacturers instructions complete all as specified and directed.

M&L for decorative laminate type 1, 0.9 mm thick colour and pattern as approved fixed as in door shutters

S & F 35mm thick second class hardwood factory made glazed and skeleton door shutters open rebated of , prepared to receive glass/gauge etc divided into square , with plain, chamfered or rounded, mitred and rebated sash bars any numbers , fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note:- S & f glass/gauge shall be measured & paid seperately.

S&F 25 mm thick HDHMR board (of Action Tesa or Green lam ply or equivalent ) door shutter with both side decorative laminate and processed in factory to cutsize incl 25 mm wide and 0.8mm thick PVC edge band of REHAU or equivalent fixed with adhesive complete all as specified and directed

S & F 35mm thick factory made partly gauzed and partly panelled skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note:- S & f glass/gauge shall be measured & paid seperately.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed to wodden door shutters with stainless steel with staples complete all as specified..

S&F aluminium mesh of wieght not less than.0.55 Kg/Sqm as support to SS wire cloth in door shutters.

S &F Framed work such as grills, gratings, etc., with ends of bar shouldered &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks & similar work conforming to Fe 290 GDE -E-165.

M&L for rolled mild steel sections as in main and cross beams,hip & Jack rafters.Purlins where connected common rafters,vertical posts fixed with angle cleats or to the connection plates conforming to Fe-410W Gde E-250 completed as specified and directed.

S &F Framed work such as grills, gratings, etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks with & similar work conforming to Fe 290 GDE -E-165 , framed and hung as in gates incl pintol hinges , stops, hand made sliding bolts etc and for ornamental and intricate design complete all as specified and directed.

S & F MS butt hinges 100mm size cold rolled medium weight and fixed as directed and specified.

S & F SS butt hinges 100mm size medium weight and fixed as directed and specified.

S & F MS butt hinges 50 mm size cold rolled medium weight and fixed as directed and specified.

S & F 250 mm long SS sliding door bolt with hasp, staple (bolt type) not less than 12 mm dia with & minimum of 6 bolts & nuts , 4 on bolt plate & 2 on staple plate.

S & F SS handles cast moulded type 150mm size fixed with screws.

S & F SS barrel tower bolts not less than 12 mm dia of extruded section, 200mm long as specified.

S & F in repair 75 mm long door stopper of stainless steel body with two number rubber shoes

S & F 75 mm long door stopper of stainless steel body with two number rubber shoes complete.

S & F MS Helical door spring150mm long including roller and roller plate complete fixed to angle iron chowkats. as directed and specified.

S & F in repair pressed steel factory made cupboard shutter with frame of 1.25 mm thick and shutter 1 mm thick PBI sheet with 6 nos 3.15 mm thick and 100 mm long steel hinges godrej patern locking arrangement incl 12 mm dia vertical rod one tie hanger of 10mm dia aluminium conduit pipe and 2 Nos coat hooks and 19mm dia hanging rod of aluminium tube and spray painting in factory with two coat synthetic enamel paint and one coat of zinc chrome primer in wood finish pattern or as directed. (Refer Drg No. TD/2009/105(R) shett No. 1/1 for reference)

Casement fixed cum top Hung Window size - 450*900 mm : uPVC window with having bottom part fix & top part openable glass sash with pull down mesh size 450*450mm all as specified in Above item.

Fix Window size - 810*750 mm : uPVC window with having one mullion frame with glass only all as specified in Above item.

Casement fixed cum top Hung Window size - 550*1200 mm : uPVC window with having bottom part fix & top part openable glass sash with pull down mesh size 550*600mm all as specified in Above item.

Casement openable Window size - 475*1200 mm : uPVC window with single openable glass sash with pull down mesh size 475*1200 mm all as specified in Above item.

Casement fixed cum top Hung Window size - 450*1200 mm : uPVC window with having bottom part fix & top part openable glass sash with pull down mesh size 450*600mm all as specified in Above item.

Slider Window size -1500*1200 mm : uPVC window with having two glass sash panel inside one slider wire mesh panel all as specified in Above item.

Slider Window size -1200*1200 mm : uPVC window with having two glass sash panel inside one slider wire mesh panel all as specified in Above item.

Slider Window size -1000*1000 mm : uPVC window with having two glass sash panel inside one slider wire mesh panel all as specified in Above item.

Slider Window size -2100*1200 mm : uPVC window with having two glass sash panel inside one slider wire mesh panel all as specified in Above item.

Slider Window size -1000*1200 mm : uPVC window with having two glass sash panel inside one slider wire mesh panel all as specified in Above item.

Slider Window size -2000*1200 mm : uPVC window with having two glass sash panel inside one slider wire mesh panel all as specified in Above item.

S&F MS grill powder coated fixed to frame of window/Jambs of window.

S&F in repair 25 mm dia SS drapery rod grade 304 medium weight all as specified and as directed. Make Jindal or equivalent

S&F SS -304 grade brackets/ end brackets for holding drapery rod all as specified and as directed.

S&F SS Finials suitable for 25mm dia SS 304 grade drapery rod as approved

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed

M&L preparation old treated or painted steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed

M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed

M&L for preparation of old painted wooden or wood based surfaces of any description n.exc 10 cm in width or girth when unconnected with other painting or when painted in a diferent tint and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means as per instruction of distemper/paint manufacturer compliances over a coat of primer over a coat of wall care putty 3mm thick to make smooth the undulated surfaces complete all as specified and directed.

M&L for complete removal of existing treatment on walls, including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means as per instructions of distemper/paint manufacturing companies over a coat of primer over a coat of wall care putty of 3mm thick to make smooth the undulated surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint by mechanical means over a coat of primer complete all as specified and directed. (make- Apex ultima of asian, weather shield max of ICI/Dulux)

M/L Complete removal of existing treatment of old plastered surfaces of walls and Washing, rubbing down and stopping of painted surfaces and applying two coats of exterior emulsion paint by mechanical means over as per instructions of distemper/paint manufacturing companies a coat of primer complete all as specified and directed.

M & L for preparation of old plastered surfaces of walls & applying two coats of white wash by mechanical means complete as spd & directed

M & L for preparation of newly plastered surfaces & applying three coats of white wash by mechanical means on ceilings complete as spd & directed

M & L Complete removal of existing treatment of old plastered surfaces of ceilling and Washing, rubbing down and stopping of painted surfaces & applying two coats of white wash by mechanical means complete all as spd & directed

M&L Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate,on lintels up to 1.5m clear span, bed plates,coping, kerbs water trough & the like including weathering, slightly rounded or chamfered angles & throating complete, as directed

Taking down existing water proofing roof treatment of all description cleaning the surface by hacking to receive plaster complete all as specified and removing demolished material outside MoD land .

M&L padding in PCC 1:2:4 type B-1 (20mm gr stone aggr) laid to provided a reqd slope finished even & smooth without using extra cement complete all as specified and directed.

M&L 15mm thick screed bed in cement mortar 1:4 to on roof surfaces mixed with WPC as per manufacturers instructions. Note :supply only liquid water proofing compund shall be measured and paid seperately.

Supply only liquid water proofing compund

S&F fiber reinforced UV resistant elastomeric liquid applied waterproofing & heat reflective coating with acrylic polymers and polyester/glass fibers after scraping and properly cleaning the surface to remove loose particles with wire brushes complete or as directed water proofing treatment shall be in three coats over a coat of primer and as per manufacturers instructions complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .

M&L for 10-12 mm thick granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, door cills and like laid over and including approved chemical adhessive (Ultratech, Ambuja, etc).

M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base

M & L 25 mm th Sand filling under floors as cushion to PCC inter locking pavers.

M &L Machine pressed precast concrete interlocking paver block of any shape & size With grey cement and no pigments confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade complete all as specified and directed.

M &L Machine pressed precast concrete interlocking paver block of any shape & size With grey cement and no pigments confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M & L for precast , PCC (1:3:6) type -1 using 20 mm graded stone aggregate as in kerb stone including weathering,throating etc set in CM 1:6 of size 300 x 300 x 150mm .

M&L 2 coats of synthetic enamel paint over a coat of primer on new concrete or plastered surfaces incl preparation of surfaces as on kerb stones.

M&L for chequered cement concrete tiles 300x300x22mm thick, set jointed & pointed in neat cement slurry in floors with grey cement & pigment over and including 20mm thick screed bed in cm 1:6 complete all as specified and directed

S & F fixed in repair plate rack of size 900mmx750mmx250mm fabricated out of .1mm th stainless steel sheet of grade SS-304 complete all as specified and directed.

Dismantling/ chipping of unsound weak loose & cracked concrete/ cover of reinforcement over RCC columns,roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement and tied mild steel wire fabric of weight exc. 4 Kg/ Sqm as reinforcement, tied or tuck welding to existing reinforcement to concrete surfaces, applying adhesive/admixture over Mild steel fabric, applying rust remover, removing rusted steel bars, applying two caots of alkaline rust converting primer SIKA rust off - 100 or equivalent apply bonding agent to old concrete surface and providing PMM to the reqd thickness and finishing the surface with micro concrete SikaREp Microcrete-4 or equivalent Doctor Fixit and forsoc having compressive strength more than 60 N/mm2 ( 28 days) to true line incl necessary formwork, shuttering, scaffholding etc reqd at site of work. Note : Mild Steel wire fabric shall be measured & paid seperately

ditto- as item no 176 but using steel reinforcement ditto. Note : Steel reinforcement shall be measured & paid seperately

Dismantling loose/cracked concrete completely as in chajjas, balconies, roof projections upto double storey buildgs including cleaning existing reinforcement, applying rust remover, removing rusted steel bars,reinforcement and tied or tuck welding to existing reinforcement. apply bonding agent to hold concrete surface and casting chajjas using RCC 1: 1.5 : 3 type B1 (using 20 mm graded stone aggregate) to outward slope incl necessary formwork, scaffholding etc complete. Note:- Steel reinforcement shall be measured and paid seperately.

Dismantling/ chipping of unsound weak/ loose & cracked concrete/ cement plaster as in soffits of chajjas, ceillings , roof projections upto double storey buildgs including cleaning existing reinforcement, applying approved rust remover, removing rusted steel bars tied or tuck welding steel reinforcement to existing reinforcement if necessary , apply Epoxy resin concrete bonding (Sikadur-32LP @ 0.4 Kg/Sqm) coat on prepared RCC surfaces as per manufacturers instructionbonding agent to old concrete/ plaster surface and finishing to required thickness with PMM (polymer modified ready to use cementitious mortar) Make : Sika, Doctor fixit and forsoc Note :- Steel reinforcement shall be measured and paid seperately.

S&F MS TMT bars 6 mm to 8 mm dia cut to length bent to shape reqd incl cranking, bending spirally for hooping for cols, hooking ends and binding with steel MS wire (annealed) not less than 0.9 mm dia.

ditto-as per item No 180 but 10 mm dia & over

Dismantling loose/cracked concrete cover as in RCC facia upward or downward of thickness not exc 100 mm , cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry incl dusting of steel reinforcement, providing mild steel wire fabric of weight exc. 4 Kg/ Sqm as reinforcement tied to existing reinforcement or tuck welding to existing reinforcemrnt and applying PMM (polymer modified ready to use cementitious mortar) to the reqd thickness and finishing the surface to true line incl necessary formwork shuttering, scaffolding etc reqd at site of work. Make :- Sika , Doctor fixit, Forsoc Note:- Supply only steel wire fabric shall be measured and paid seperately.

ditto- as above item no 182 but using steel reinforcement in lieu of wiremesh ditto including binding /welding existing reinforcement. Note :- Steel reinforcement shall be measured and paid seperately.

S& F hard drawn steel wire fabric exc. 4 kg/Sqm weight cut tom length bent to shape required and tying with & incl mild steel wire (annealed) not less than 0.9 mm dia as in reinforcement.

S&F pre painted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers as specified. Make :-- Jindal everest & Tata

S&F in repairs 2 mm thick fibre glass reinforced transluscent corrugated sheet with two corrugations side laps fixed with L or J hooks or cranked bolts complete all as specified and directed.

M&L for retrieving plants/vegetation from walls roofs, chhajja upto double storey height incl taking out deep roots and poring Hcl acid and making good the disturbed surfaces with CM 1:4 incl all means required at site and directed by Engineer-in-Charge.

Cutting chases, pinning in stone concrete block or slab walls, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cill, sunshades, shelves, lintal etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting exc 10cm & not exc 20cm girth

Cutting chases, pinning in stone concrete block or slab walls, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cill, sunshades, shelves, lintal etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, n exc 10 cm girth cutting in brick wall etc complete.

Excavation in post holes in soft/loose soil,each n. sxc. 0.50 cum,getting out,returning,filling in and ramming earth or broken rubble mixed with earth around,in layers n. exc. 25 cm thick,watering and removing surplus excavated soil to a distance n. exc. 50 m and making good surfaces.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out soft/loose soil complete.

M/LCement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete.

Returning Filling incl spreading leveling watering and well ramming in layers n exc 25cm in soft/loose soil complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete.

M/LForm work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation and plinth beams and similar work for rough finished flat surfaces of concrete complete.

M/LForm work to sides of square or rectangular columns, pillars, posts and struts for rough finished surfaces of concrete complete.

M/LRCC nominal mix 1:2:4 (using 20 mm graded stone aggregates) in foundations, footing, plinth beams, bases for columns and mass concrete complete (reinforcement and formwork to be measured separately).

M/LRCC nominal mix 1:2:4 (using 20 mm graded stone aggregates) in columns, pillars, posts & struts complete (reinforcement and formwork to be measured separately).

M&L for 12 mm th granite ( of any type) table rubbed and polished for wall linning in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixtue of pigment to match with shade of granite. (gate pillars) Note :- Rendering shall be measured & paid seperately.

M&L for 17-18 mm th granite ( of any type) table rubbed and polished for coping in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixtue of pigment to match with shade of granite. (gate pillars) Note :- Screeding shall be measured & paid seperately.

M & L for 10 mm thick rendering in CM 1:3 for laying wall finishes (granite for gate pillars) etc.

M&L forming Square grooves in plaster not exc 12mm deep and not exc 12 mm on face

S & F steel window with side hung shutter and box type hinges with steel handle and steel peg stay with glazing bars dovetailed or welded to receive glass etc incl taking down old steel window

Ditto all as per Item No 203 above but without glazing bars.

S&F Steel ventilator with top hung shutter with out glazing bars to receive wire gauge etc including hinges steel peg stay etc complete incl taking down old ventilator.

S&F 3mm thick figured glass pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane

S&F 3mm thick plain sheet glass n exc 0.5sqm each pane glazed with oil putty in n exc 0.5 Sqm in each pane.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/ spring clips and providing fixing new ones. Note:- Supply only sheet glass shall be measured and paid seperately.

Supply only 3mm thick ordinary quality sheet glass, n exc 0.5 sqm each.

Demolition of stone slabs as in chajjas, landing etc any thickness jointed in any mortar.

M&L for sand stone slab 7.5cm thick in chajjas, landings, shelves etc not exc 2m in length, punched dressed on face and along expose edges, self faced on other side and set and pointed in CM (1:2) complete

Cutting holes into or through cement concrete slabs, chajjas etc reinforced or otherwise superficial area not exc 100 Sqcm and making good dismantled surfaces in CM 1:3 or cement concrete

S&F aluminium anodized barrel tower bolts 200mm long of extruded section.

S&F aluminium anodized handle 150mm long, cast type

S&F aluminium alloy anodised sliding door bolt 250mm long with hasp, staple (bolt type ) & fixing clips of sheet or extruded section and fixing bolts and sliding bolt of extruded section

S&F SS peg set of five of approved make as directed.

S&F MS peg set of five of approved make as directed.

S&F PVC (SWR) 50mm bore pipe single socketed in any lenth with rubber ring joints fix to wall

M&LCutting holes in stone masonry walls in cement mortar & making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required superficial area exc 150sq.cm but not exc 400 sp.cm

M&L PCC 1:2:4 type B1 (20mm gr stone aggr) as in surface channels and drains, MH etc

M&L for precast cement concrete 1:2:4 tpye B1 (20mm gr stone aggr) as in man hole covers, landings etc set in cm 1:4 complete all as specified and directed.

Supply,installation testing and commissioning of filter less auto clean kitchen chimney of size 60 cm , sunction capacity of 1200 Cum/hour with motion sensor and touch control including ducting kit all as per hindware nadia cat part No. C100220 with necessary PVC outlet pipe of suitable dia and length incl necessary making hole in walls, making good disturbed surface match with existing surface complete all as specified and directed by engineer-in-Charge. Make:- Hindware/Kutchina/Faber Note:- Taking down of old exhaust fans and depositing to MES stores of GE Jaipur included in quoted rate.

Taking down carefully surface aluminium or copper point wiring with PVC casing or conduit (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings and bell etc and making good disturbed surfaces of walls, floors, etc all as directed.

Taking down carefully sub main wiring with PVC casing capping/PVC conduit and making good disturbed surfaces complete.

Taking down MCB distribution boards with MCB's any capacity incoming and outgoing controls any make any capacity after disconnecting complete.

Taking down old unserviceable LT indoor type panel Comprising of MCBs, Bus Bar, connectors, energy meters etc complete of any capacity any size and disconnecting cable connections from incoming MCCB. Energy Meters removed from the panel to be deposited in MES Stores of GE Jaipur (60 Nos)

Point wiring complete with 1.5 sqmm, single core ,PVC insulated but unsheathed multistranded copper conductors FRLS cable, 1100 volts grade (IS -694) , laid/ drawn through and incl non metalic rigid PVC heavy duty conduit not less than 20mm dia with necessary conduit fittings/ accessaries fixed concealed in walls/ceilings by means of PVC sleeve/ dash fastners with cadmium plated iron screws all as per ISI incl sunk type pressed steel terminal boxes for mounting, fittings like switches sockets fan regulator etc with 3 mm thick phinolic laminated sheet top covers concealed in walls including 1.5 sqmm single core PVC insulated but unsheathed multi stranded coper conductor FRLS cable as continuous earth wire for the following :-

All as per item No. 227 here-in-before but one light point controlled by one way switch

All as per item No. 227 here-in-before but one fan point controlled by one way switch

All as per item No. 227 here-in-before but one light point controlled by two, two way switch.

All as per item No. 227 here-in-before but One socket outlet 6 amp controlled by one switch on same board.

All as per item No. 227 here-in-before but One socket outlet 6 amp controlled by one switch on indepdendent board.

All as per item No. 227 here-in-before but One bell point controlled by on bell push button.

Point wiring complete with 4 Sq mm, single core PVC insulated but unsheathed multi stranded copper conductor FRLS cable 1100 volts grade drawn through and including rigid non mettalic PVC conduit not less than 20mm dia with necessary conduit fittings /accessories fixed concealed in wall/ceiling by means of PVC sleeve/dash fastener with cadmium plated iron screws all as per ISI including sunk type pressed steel terminal boxes with 3 mm thick plastic laminated sheet top covers concealed in walls etc for 3 pin, 15 Amp socket outlet point on independent board including 4.0 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable as continuous earth wire to common earth and connected to earth dolly.

S&F lamp holder 6A, 240V insulated polycarbonate body with back plate complete: Make : Anchor Cat No : 39527( Code : 51191) or equivalent cat part No. Of makes specified in Appendix 'B'.

S&F switch modular 1 way 6 Amps, 230 volts, 1 module. Make : Legrand Mylink ™ mechanisms, Cat No : 675501 Make : Anchor Cat No : 39527( Code : 51191) or equivalent cat part No. Of makes specified in Appendix 'B'.

S&F modular socket 6 Amps, 2/3pin combined 2 module AC 230 volts. Make : Legrand Mylink ™ mechanisms , Cat No 6755 50 or equivalent cat part No. Of makes specified in Appendix 'B'.

S&F modular switch 1 way 16 Amps, 230 volts, 1 module. Make :Legrand Mylink ™ mechanisms, Cat No : 6755 11 or equivalent cat part No. Of makes specified in Appendix 'B'.

S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts. Make : Legrand Mylink ™ mechanisms Cat No : 6755 55 or equivalent cat part No. Of makes specified in Appendix 'B'.

S&F modular fan regulator 120 watts, 2-module AC 230 Volts. Make : Legrand Mylink ™ mechanisms Cat No : 6755 31 or equivalent cat part No. Of makes specified in Appendix 'B'.

S&F switch modular 2 way 6 Amps, 230 volts, 1 module. Make : Legrand Mylink ™ mechanisms Cat No : 6755 02 or equivalent cat part No. Of makes specified in Appendix 'B'.

S&F Modular bell push 6A 1 module Make: Legrand Mylink ™ mechanisms Cat No : 6755 04 or equivalent cat part No. Of makes specified in Appendix 'B'.

S&F bell, AC, 230 volts, single pole. Make : Legrand Cat No : 573443 or equivalent cat part No. Of makes specified in Appendix 'B'.

S&F ceiling rose 3 terminal polycarbonate body complete. Make: Ancher Penta Cat No : 39017 or equivalent cat part No. Of makes specified in Appendix 'B'.

S&F modular whiter cover plate with frame and metal flush box 1/2 module. Make : Legrand Mylink ™ mechanisms Cat No: 6755 61-62 or equivalent cat part No. Of makes specified in Appendix 'B'.

S&F modular white cover plate with frame and metal flush box 3 module. Make : Legrand Mylink ™ mechanisms Cat No : 6755 63 or equivalent cat part No. Of makes specified in Appendix 'B'.

S&F modular whiter cover plate with frame and metal flush box 4 module. Make : Legrand Mylink ™ mechanisms Cat No : 6755 64 or equivalent cat part No. Of makes specified in Appendix 'B'.

S&F modular white cover plate with frame and metal flush box 6 module. Make : Legrand Mylink ™ mechanisms Cat No : 6755 66 or equivalent cat part No. Of makes specified in Appendix 'B'.

S&F modular white cover plate with frame and metal flush box 8 module. Make : Legrand Mylink ™ mechanisms Cat No : 6755 67 or equivalent cat part No. Of makes specified in Appendix 'B'.

M&L for submain wiring with the under-mentioned runs of single core PVC insulated but unsheathed of specified size with multi stranded copper conductors, 1100 volts grade FLRS cables, drawn-through and including PVC rigid conduit not less than 20mm dia and fittings / accesories, concealed in wall and also including the specified runs of specified size earth continuity conductor of similar type cable for two runs of 4 Sq mm size main cable and one run of 4 Sq mm size earth continuity conductor complete all as specified. Note :- The above mentioned specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one run/unit length.

M&L for submain wiring with the under-mentioned runs of single core PVC insulated but unsheathed of specified size with multi stranded copper conductors, 1100 volts grade FLRS cables, drawn-through and including minimum 20mm dia PVC rigid conduit and fittings / accesories, concealed in wall and also including the specified runs of specified size earth continuity conductor of similar type cable for four runs of 6 Sq mm size main cable and two run of 6 Sq mm size earth continuity conductorcomplete all as specified. Note :- The above mentioned specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one run/unit length.

S&F 20 amp, single pole and neutral socket outlet with 2 pole and earthy, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for socket outlet with and including one number single pole 'C' series MCB 16 amp as required. Make- Legrand/Hager/Schneider and Makes Specifed in Appendix 'B'.

M & L earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth strip 25 x 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth strip protected by provision of GI pipe medium grade 40mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing on completion all as directed including taking down earthing. Note :- The cost of 7.5m long galvanised iron earth strip of 25 x 4mm size and protection pipe of 40mm bore GI light grade is deemed to be included in quoted unit rate.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6 mm galvanised iron strip

S&F MCB distribution board, powder coated, SPN , 240 volts, 4 ways,1mm thick CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. Make :Legrand Cat No: 5076 or equivalent cat part of Makes specified in Appendix 'B'.

S&F in replcement MCB distribution board, powder coated, TPN , 415 volts, 4 ways,1mm thick CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. Make:-Legrand Cat No: 5076 or equivalent cat part of Makes specified in Appendix 'B'.

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Single pole 6 to 32 amp. Make - Legrand cat ref no 408587 to 408595 or equivalent cat part of Makes specified in Appendix 'B'.

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Double pole 10 to 32 amp. Make - Legrand cat ref no 4086 14 to 4086 17 or equivalent cat part of Makes specified in Appendix 'B'.

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of TPN 63 amp. Make - Legrand cat ref no 4086 83 or equivalent cat part of Makes specified in Appendix 'B'.

S&F in repair LED (Approx 1.2M/ 4 ft) batten made of Extruded aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2500 lumens/20 watt at a minimum system efficacy of 125 Lumens per watt and total power consumption not more than 20 watt including driver. It has a rated system life time of 50000 burning hours and should have a color temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete. Make : Crompton Greaves Cat Part No : CCS-100-20-65-HL2-DP-NWH or equivalent cat part of Makes specified in Appendix 'B'.

S&F in repair LED (0.6 M/ 2 ft) batten made of Extruded aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 1000 lumens/10 watt at a minimum system efficacy of 100 lumen per watt and total power consumption not more than 10 watt including driver. It has a rated system life time of 50000 burning hours and should have a color temperature of 5700K, CRI>80, THD<10% and PF>0.95 complete. Make : Crompton Greaves Cat Part No : LDL-10-CDLor equivalent cat part of Makes specified in Appendix 'B'.

S&F LED bulk head fitting 10 watt IP 65 & IK 08 with pressure die cast aluminium housing & polycarbonate diffuser duly pre wired connection with 0.75 Sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable all as per Crompton Greaves Cat Ref No. LBHE-10-CDL or equivalent cat part of Makes specified in Appendix 'B'.

S&F repair LED 20 watt street light Pressure Die Cast Aluminium housing with toughened glass duly prewired connection having a nominal system lumen output of efficiency 110 lumens/ watt light watt and total power consumption not more than 20 watt including driver. It has a rated IP 66 protection class with 5 KV inbuilt surge protectione. Make : Crompton Greaves Cat Part No : LSTS-20-CDL-M or equivalent cat part of Makes specified in Appendix 'B'.

S&F in replacement 10 watt LED T -lamp B-22 base (warm white/golden yellow) 1000 lumens, height 8.0 cm width 20.5. Make : Philips Part No 9290018611 or equivalent cat part of Makes specified in Appendix 'B'.

Supply and fix eahaust fan MS body AC 230 volts of 300 mm sweep with standard accessories including providing 04 Nos fasteners 10mmx75mm long in existing wall and electrical connection with 3 core flexible cable of appropriate size from ceiling rose to fan and making suitable hole in wall and making good disturbed surface complete.

S&F in repair surface mounted LED panel made of Pressure die cast aluminium housing of size 177 mm x 177 mm, 12 watt, 1200 lumen output having luminous efficacy >100 Im/W, 5700K, 50Hz, p.f. .0.90, CRI 80, THD ,20%, 50000 burning hours including making connection. Make : Crompton Greaves Cat Part No LCDSPLN-S-12-CDL or equivalent cat part of Makes specified in Appendix 'B'.

Supply and fixing ceiling fan 1200 mm sweep 50 Hz AC 230 volts, 5 star rated in white colour with fan motor, blade set , 0.45 mtr down rod, canopy set, rubber reel including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling rose and writing MES No on Fan body as required all as specified and directed. Make : Orient model summer delight ornamental or equivalent cat part of Makes specified in Appendix 'B'.

Supply and fixing smart electric water geyser vertical wall mounting type storage type of 25 liter capacity 5 star rating with smart bath logic, wi fi connect, auto diagnosis and eco function with Internet App and remotely controlled temperature, heating element 2.0 KW ,rated pressure 8 bar, single phase 230 volts 50 Hz AC all as per make RAcold Omnis Wi-Fi including 02 Nos and 15mm bore 450 mm long chromium plated metallic flexible pipe connection for water supply complete. Make : RACOLD OMNIS Wi- Fi/ V-Guard or equivalent cat part of Makes specified in Appendix 'B'.

Supply, installation, testing and commissioning of LT panel board fabricated out of 2mm thick stainless steel (SS 316) with copper bus bar 4 pole equal of capacity in colour code R, Y & B, 100 Amps 415 volts indoor typeof size 750mm x 650mm x 250 mm, installed on procelain insulators with bus bar chamber. The panel shall be dust and vermin proof, protection class IP 42 class, front opening & compartmental type with approach for cable entry and for easy maintenance duly internally wired with FRLS, PVC insulated stranded copper conductor cable of 1.0 Sqmm including LED indicator for R, Y & B and 4 Nos 50x 6mm thick stainless steel clamps suitable size of washer and nuts shall be provided for fixing the panel and comprising of the following: Incoming :- One number MCCB 125 Amps 4 pole 16 KA 415 volts, 70-100%, 50 Hz . Make Legrand Cat No. 4200 16 or equivalent cat part of Makes specified in Appendix 'B'. Outgoing :- (a) MCB TPN 40 Amps 'C' series 10 KA AC AC 240 Volts 04 Nos Make Legrand Cat No. 4086 83. or equivalent cat part of Makes specified in Appendix 'B'. (b) MCB DB 20 Amps 'C' series 10 KA AC 240 volts - 01 Nos Make Legrand Cat No. 408631 to 408636. or equivalent cat part of Makes specified in Appendix 'B'.. (c) Three phase tamper proof meter with optical port 10 to 60 Amps :- 04 Nos .Make : HPL Cat No TPPL 1810000000OCN0 or equivalent cat part of Makes specified in Appendix 'B'. Note : Existing old energy meter shall be deposited at MES yard.

M/S Anil Enterprises

Ms Hari Deva Builders