Renovation of existing wash rooms of PRAFPUL buildings at South Site, BARC, Mumbai 400085.

Amount

Brick work Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ sq.cm strength of approved make and size in super structure up to and including Floor II Level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.

Half brick masonry using Flyash bricks Providing and constructing Half brick masonry using Flyash/ Flyash Lime bricks with minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement in Super Structure up to Floor - II level. (Reinforcement will be paid under relevant item)

15 mm thick internal plastering Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge

Reinforced cement concrete M-30 Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.

PCC 1:1.5:3 Providing and laying in position cement concrete of 1:1.5:3 at all levels (1 cement, 1.5 crushed sand, 3 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc.. complete as per specifications and drawings but excluding the cost of shuttering, centering and steel reinforcement.

Shuttering Form work Providing , centering ,shuttering Form work using PVC Film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings and specifications at all levels. For Super structure.

Reinforcement Steel Providing Reinforcement Steel Fe500SD for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor Using TMT bars of specified grades of all sizes. TMT bars to be supplied by the contractor from the own plants of SAIL, RINL or TATA make only using virgin materials

Structural Steel Providing Structural steel work using angles, channels, joists, MS plates and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge Up to and including 300 mm Joists, 350 mm channels, MS plates and below sections using materials produced by SAIL / RINL (Vizag Steel) / TATA. All test reports to be provided along with the supply of the materials

Structural repairs Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer)5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used)

G.I. chicken mesh Providing and fixing G.I. chicken mesh in the junctions of concrete & brick work / masonry or as directed by the Engineer in charge including cutting, fixing with nails in position before plastering complete all as directed by the Engineer-in-charge. (only area of the chicken mesh used alone will be measured)

Micro concrete Providing SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charge Using 100% SFMC

Glazed VITRIFIED wall tiles/ floor tiles Providing and fixing Glazed VITRIFIED wall tiles/ floor tiles of approved make in different sizes Using Tiles of size above 600 x600 mm and up to 1200 x 1200 mm conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) for floor/ over 12 mm thick bed of cement mortar 1:3 (using crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge

Add Extra for polymer mortar in place of cement mortar

Cement based waterproofing Providing and laying water proofing treatment in sunken portions of WCs, bath rooms etc. by appying cement slurry mixed with water proofing cement compound consisting of applying: (a) 1st layer of slurry of cement @ 0.488 kg / sq.m mixed with water proofing cement compound @ 0.253 kg per sq.m. including injecting cemnt slurry .This layer will be allowed to air cure for 4 hours. (b) 2nd layer of slurry of cement @ 0.242 kg / sq.m mixed with water proofing cement compound @ 0.126 kg / sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with cement slurry. Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (using crushed sand) admixed with proprietary water proofing compound conforming to relevant IS and approved by Engineer-in-charge including mixing 'RECRON 3S' fibre at the rate of 125 grams per 50 kg of cement in top layer of plaster and finally finishing the surface with trowel with neat cement slury in bottom and all the sides of sunken portion. complete as directed by the Enginer-in-charge. The treatment to be tested for water tightness before filling the sunken areas.

Brick bat coba Providing cement based water proofing treatment to sunken portions of WCs, bath rooms, terraces, chajjas, cleaning the concrete surfaces, giving injections to the top slab as required with cement and approved waterproofing compound solution to fill up all inherient holes, voids, honeycombs etc. in the concrete slab, setting brickbat coba in waterprrof mortar with necessary gradient for easy flow of water and continue the treatment along the inner faces of parapet or other adjoining wall up to a height of 300 mm in thew shape of vattas, with waterproof plaster finished smooth with trovel in cement / geru with false markings of 300 mm squares complete as directed by the Engineer-in-charge With Average thickness of 120 mm and minimum thickness at khurra as 65 mm using river sand / crushed sand

Granite work Providing and fixing Minimum 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Jet Black colour for kitchen platforms, vanitiy counters, wash basin counters, door frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish and /or rough flamed finished granite for stpes wherever requirement as per EIC etc. complete at all levels. Note: cost moulding and polishing of granite edges as per required by EIC is included in the item.

Granite roughened by flaming method ZEBRA BLACK colour Providing and fixing minimum 17 mm thick gang saw cut roughened by flaming method machine cut ZEBRA BLACK colour granite for platforms/steps and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc.Granite steps shall be fixed in required shapes and patterns like sandwitch/fixing double granite with epoxy resin hardner/Araldite) etc complete as directed by the Engineer-in-charge at all levels.

Extra for providing edge moulding to 17 mm thick Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge.

Stainless steel SS-304 work Design, supply, fabrication, testing & installation of 304 grade Stainless Steel work for bottom tray of cubical shower/drain pipes/ grating of approved size and make and quality by welding, mirror / matt polishing, buffing, fixing at site etc. for tray of cubical shower alongwith perforated sheet for platform over tray using 3mm/2mm SS 304 sheet including special sections as per drawings, specifications or as per sample provided by department. A sample to be fabricated and to be got approved by the Engineer-in charge before starting of work at site . This work to be executed through approved specialized agency.

Wood Work in second class teak wood Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge Second class teak wood

LOUVERED OPENING Providing & fixing LOUVERED OPENING of required size in door shutters including making the opening, providing & fixing teak wood louver blades with necessary teak wood frame work, beading & applying one coat of approved wood primer etc. complete.

35 mm thick flush door shutters Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete.

Laminated sheet Providing and fixing decorative high pressure 1.0 mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed

Teak wood battens Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Commercial flush door shutters

FRP door shutters Providing and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws 35 mm thick panelled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws.

Extra for providing vision panel Extra for providing vision panel not exceeding 0.1 sqm in all type of flush door including fixing 4 mm clear glass with necessary teak wood beadings complete all as per specifications and as per drawings.

Aluminium work with colour anodizing Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) Item also includes charges for colour anodizing

Aluminium grill Providng and fixing Aluminium Grill 10 mm thick "DECO GRILLE" make Model No. DG- 202 in natural Silver anodising of min 15 Micronswith a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ Sq.M including providing anfd fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge .Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm. Item also includes providing Aluminium Grill 10 mm thick with colour anodised by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge

With frosted glass panes of 6.00 mm thickness Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) With frosted glass panes of 6.00 mm thickness

Clear float glass Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) With clear float glass panes of 6.00 mm thickness

Silicon sealant Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width

Aluminium Composite Metal Panel Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under reelevant item)

Tower boltsof size 300 X 12 mm Providing and fixing stainless steel tower bolts of size 300 X 12 mm of approved make with necessary screws etc. all as per specifications and as per drawings.

Tower bolts of size 150 X 12 mm Providing and fixing stainless steel tower bolts of size 150 X 12 mm of approved make with necessary screws etc.all as per specifications and as per drawings.

S.S. butt hinges size 125 x 64 x 2.5 mm Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight)" GARG' or equivalent approved make with suitable stainless steel screws etc. complete

S.S. butt hinges of size 75 x 50 x 2.5mm Providing and fixing IS:12817 marked stainles steel butt hinges of size 75 x 50 x 2.5mm (heavy weight) of approved make with stainless steel screws etc. complete as directed by the Engineer-in-charge

Stainless steel "C" type door handles Providing and fixing pair of stainless steel "C" type door handles 19 mm dia, 250 mm long SS 304 grade solid rod , of specified size in steel doors/ wooden doors including screws / bolts etc. all as per drawings and specifications complete.

Mortise latch Providing and fixing brass mortise latch and lock of approved make with 6 levers and a pair of lever Brass handles with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications .

Mortice lock for aluminium door Providing and fixing approved Ramson/ Godrej make Mortice lock 4 lever with necessary screws, to the Aluminium doors as per specifications including all materials, labour etc. and as directed by the Engineer- In- Charge.

Key less latch Providing and fixing "Godrej" make mortice Key less latch with chrome or Powder Coated finish and a pair of lever handles with necessary screws etc complete in all kind of airlock, bath / toilet Doors / false ceiling trap doors.

Heavy duty door closer Providing supply and fixing Door Closer TS 71- DORMA- Std Arm.with necessary accessories and screws etc…. As per manufactures instruction, specifications and as directed by EIC.

Magnetic catcher Providing and fixing heavy duty magnetic catcher triple strip vertical type 40 mm of approved quality in cupboard / ward robe/FRP shutters, including fixing with necessary screws etc. complete .

SS adjustable friction windows stays Providing and fixing stainless steel (SS 304 Grade) 710 X 19 mm size adjustable friction windows stays of approved quality with necessary stainless steel screws to the side hung windows as per specifications and as directed by the Engineer-in-charge

fancy SS handles Providing and fixing SS handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make to req. colour or shade with necessary screws etc. complete as approved by EIC.

WASH BASIN White vitreous China counter top / counter below wash basin size 560 x 410 mm / 560 x 450 mm with single 15 mm C.P. brass pillar tap (OVAL / ROUND Models) including providing and fixing of C.P Brass Waste coupling 32 mm Dia of approved make Half threaded or Full threaded as per requirement. White vitreous China wash basin size 630 x4 450 mm and equivalent sizes with heavy duty fancy single 15 mm C.P. brass pillar tap

Counter top wash basin Providing and fixing white vitreous counter top wash basin of size 480mm x 380 mmx140mm of approved make including making all connections but excluding the cost of fittings etc. complete all as per specifications and as directed by the Engineer-in-charge. 1).Table top basin, size:480 x380x140 mm, 2)Concealed 40 mm PVC waste pipe of Heavy quality connection from wash basin to Floor Trap. 3)waste coupling 32 mm size full thread with 130 mm height 4)Bottle Trap (with internal partition) 32 mm size with both 300 mm long connecting pipes & wall flanges etc complete as per given detailed technical specifications including all materials, labour etc. and as directed by the Engineer- In- Charge.

Flat back urinal Stall Providing and fixing white vitreous china flat back half stall urinal with fixing accessories, size 340x320x650mm, clamps complete all as per specifications drawings and as directed by the Engineer-in-charge. 1)Concealed 40 mm PVC waste pipe of Heavy quality connection from wash basin to Floor Trap. 2)waste coupling 32 mm size full thread with 130 mm height-ald-chr-705130. 3)Bottle Trap (with internal partition) 32 mm size with both 300 mm long connecting pipes & wall flanges etc complete as per given detailed technical specifications including all materials, labour etc. and as directed by the Engineer- In- Charge.

C.P. brass Urinal spreader Providing and fixing 15 mm C.P brass urinal spreader size with 1/2" BSP thread and shapes, weighing not less than 60 gm of approved make and type.

Urinal sensor Providing and fixing URINAL FLUSHER recessed SELF FLUSH INFRA-RED sensor + Manual, Power : Electrical (AC 220V, 50Hz) + Battery (4 x AA Duracell) for urinals of working pressure .05Mpa -0.70 Mpa, Sensing Range : 65 cm ± 5 cm, Dia of Inlet/ Outlet Pipe :Dn 15 ( G1/2”) with all necessary acessories including flexible hose for connection in inlet & outlet sides, complete as directed by the Engineer-in-charge and as per manufactures instructions. Apx size 135mmx180mmx60mm.

Automatic sensor tap Providing & fixing approved type Automatic Sensor tap INFRA-RED sensor + Manual, Power : Electrical (AC 220V, 50Hz) + Battery (4 x AA Duracell) for wash basin of working pressure .05Mpa -0.70 Mpa, Sensing Range : 65 cm ± 5 cm, Dia of Inlet/ Outlet Pipe :Dn 15 ( G1/2”) with all necessary acessories including flexible hose for connection in inlet & outlet sides, complete as directed by the Engineer-in-charge and as per manufactures instructions.

Urinal flush cock Providing and fixing Brass 15 mm C.P presstomatic series auto shut urinal flush cock of approved make and quality and providing and fixng necessary piping arrangement for connecting to outlet system of above item.

Indian water closet Providing and fixing Indian water closet (Orissa pan) of apperoved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm

Floor mounted AIWC Providing and fixing white vitreous China universal pedestal type water closet (Anglo Indian type W.C. pan) with seat and lid, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge

Floor mounted EWC Providing and fixing floor mounted one piece white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (PUSH BUTTON) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge. Size:79x37x69cm

Bath room fittings Providing and fixing bath room fittings like Single Lever Diverter withexposed and concealed body consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals), Button Assembly Sleeve & Button System; providing and fixing Bathtub Spout with Button Attachment for Hand Shower including providing adn fixing of both Hand Shower and overhead shower along with 600 mm long hose,200X200mm square shower head with shower arm for hand shower;CP brass 95mm dia shower rose with Shower arm of approved make etc complete as per given detailed technical specifications including all materials, labour etc. and as directed by the Engineer- In- Charge.

Storage type water heater/gyser Supply, installation, testing and commissioning of instant water heater of following details:a.Capacity: 25 Litre; b.Power supply: 230 V , AC, 50 Hz, power supply cord shall be provided.;c.Energy Efficiency class: 5 star as per BEE guideline; d.PUF insulation for energy savings; e.Thermal cutout; f.Adjustable thermostat with automatic ON/OFF indication and variable setting oftemperature; g.Mounting : Horizontal/Vertical as per site condition. The heater shall be installed and tested with all mounting accessories. Provision of power supply will be measured in separate item. Water line connection is not under the scope of the bidder.

Gents toilet name plate with sign Providing and fixng toilet name plate and sign gents /ladies symbol consisting with stainless steel plate, size-225x150mm for Gents toilet.

URINAL MAT Supplying and laying refresh Urinal screen mat of standard size for urinal pan of approved etc complete as per specification. Note:1 set=10pc

SS grating 150 mm sqaure with frame Providing and fixing heavy quality stainless steel / C.P brass grating of approved equvalent make as specified for floor traps / nahani traps all as directed by the Engineer-in-charge

Toilet paper holder Providing and fixing stainless steel toilet paper holder recessed type of approved make and type with S.S screws as directed by the Engineer-in-charge complete. TOILET ROLL HOLDER WITH FLAP AKP-CHR-35753P

Fancy Mirror Providing and fixing 6 mm thick mirrors of required size of approved make with decorative frame edges complete with 6 mm thick asbestos sheet back ground fixed to walls with SS STUDS and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge .

Soap Dispenser Providing & fixing approved type heavy duty Euronics Liquid soap Dispenser-ES-04 with S.S brackets, cap etc. fixed to wall with C.P. brass screws, & screwed on to wooden rawl plugs etc. complete.

Aerosol perfume dispenser Providing & fixing approved type Aerosol perfume dispenser polycarbovate ABS casing of Euronics model EA24 Didigtal LED 300MLcapacty with refill can with S.S brackets, cap etc. fixed to wall with C.P. brass screws, & screwed on to wooden rawl plugs etc. complete.

C.P. brass TOWEL RAIL/Hook Providing and fixing C.P brass towel rail of approved make 600 mm long or Hook of approved size and pattern complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-charge.

C.P. brass / copper inlet connection Providing and fixing CP brass / copper inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 600 mm long

Concelaed Stop cock Providing and fixing 20 mm n.b CP brass concealed stop cock of approved make of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge

Angle cock Providing and fixing C.P brass Angle cock of heavy quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge Providing and Fixing 15 mm CP brass Angle stop cock of approved make- quarter Turn

C.P. brass BIB cock Providing and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge 15 mm dia bib cock of approved type and make .

Heavy qualilty BIB cock Providing and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge 15 mm dia Exposed part kit of single concealed stop cock consisting of operating level, cartridge sleeve, wall flange & basin spout(compatible with ALD-441) cat no: KUP-CHR-35441 KPM.

2 in 1 bib cock and Angle cock Providing and fixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge

Pillar cock Providing and fixing 15 mm C.P brass pillar cock of heavy Quality of approved make and specied type as per specifications and as directed by the Engineer-in-charge.

C.P.brass pillar cock elbow operated Providing and fixing Heavy Quality C.P Brass Pillar cock ELBOW operated of "Jaquar " make and type as per specifications and as directed by the Project Engineer (Samples to be got approved by the Project Engineer)

CP Brass Bottle trap Providing and fixing heavy quality CP brass bottle trap 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved make for wash basins / urinal etc all as per specifications and directed by the Engineer in charge.

S.W. gully trap Providing and fixing square mouth S.W. gully trap complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size gully trap "P" type

C.I. NAHANI TRAP Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in-charge

PVC inlet connection Providing and fixing PVC inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 600 mm long

Soap tray Providing & fixing approved type heavy duty Jaquar CP brass Soap tray - recessed type etc. fixed to wall with C.P. brass screws, & screwed on to wooden rawl plugs etc. complete.

Double Pin Cloth Hanger Providing and fixing Premium Stainless Steel Double Pin Cloth Hanger of Dimensions: 5x3 cm, Wall Mounted Bathroom Cloth Hanger,Cloth Wall Hook,Door Hooks Rail for Hanging Keys,Clothes,Towel in wash rooms including suitable ss screws and wall grips.

Automatic Hand dryer Providing & fixing approved type heavy duty hi speed Euronics Automatic Hand dryer of S.S. Body of make Euronics adn model PLUTO PHD501 with S.S brackets, cap etc. fixed to wall with C.P. brass screws, & screwed on to wooden rawl plugs etc. complete.

Automatic air blade hand dryer Providing & fixing energy efficient air blade automatic hand dryer having 10 / 12 seconds dry time of S.S. Body Model Air Blad 9KJ of M/s Dyson with all accessories, S.S brackets, cap given by manufacturer etc. fixed to wall with C.P. brass screws, & screwed on to wooden rawl plugs etc. complete as per specifications and as directed by the Engineer-in-charge.

Stainless steel sink Providing and fixing satin finish stainless steel AISI 304 (18/8) kitchen sink of size 610 x 510 mm without drain board and bowl size 685 x 535 x 250 mm depth as per IS13983 of approved make, with C.I. brackets, fittings and stainless steel plug 40 mm including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried complete as per specifications and as directed by the Engineer-in-charge.

C I SOIL, WASTE PIPES Providing, supplying, fixing in position, under floors or in walls centrifugally cast iron pipes including required specials like bends, tees, 'Y' collars, cowl etc for soil, waste and ventilation pipes conforming to IS.3989 of approved make including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.

75 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 0.90 kg lead / joint

100 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.00 kg lead / joint

C.I. FRAME & COVER Supplying and fixing Cast Iron Man hole or Cast Iron Steps/ cover / CI Grating of approved make and weight as specified in the drawings or as directed by the Engineer in charge.

CPVC pipes for drainage Providing and fixing Chlorinated PVC (CPVC) pipes having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Project Engineer 50 mm outer dia CPVC pipe (External/Concealed)

Gate Valves Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge

Chlorinated (CPVC) pipes Providing and fixing Chlorinated (CPVC) pipes having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Engineer-In-Charge.

CPVC Pipes 20 mm OD SDR 11

CPVC Pipes 25 mm OD SDR 11

Providing and fixing PVC multi trap with foul arrester of size 4" (7” ht) without jalli (HSN CODE:3917) including fixing in position embedding in cement concrete 1:2:4,connections of all branch pipes,etc… complete all as per specifications and drawings and as directed by the Engineer-In-Charge.

constructioning Inspection chambers Providing and constructioning Inspection chambers of Internal size clear dimention of 900 x 600 mm in 230 thick brick masonry with cement mortat 1:4 over a bed of 150 mm thick 1:4:8 cement concrete foundation, plastering with cement mortar 1:4 20 mm thick on inside, out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm, embedding the frame and cover with CC 1:2:4 concrete, and fixing cast iron steps if necessary at 300mm intervals complete . Depth of chamber not exceeding 900 mm. (excavation, soling, cast iron cover and C.I steps will be paid separately under relevant item)

Extra depth over initial depth of 900 mm for chambers of 900 x 600 mm internal size.including fixing cast iron steps (C.I steps shall be paid under relevant item)

Closing opening in brickwork upto 1.00 SqM Providing and constructing brick work for closing opening in brickwork upto 1.00 SqM in cement mortar using standard bricks including 15mm thick plastering on both faces using readymix plaster , curing, raking out joints complete as per specifications and as directed by the Engineer-in-charge

Core cutting in RCC beyond 100 mm up to and including 150 mm Dia

Synthetic enamel paint Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Supply of highly skilled manpower Supply of suitable highly skilled Carpenter / plumber / mason manpower with set of hand tools / drilling / cutting machines for miscellaneous jobs like carpentry maintenance, plumbing and masonry jobs. NOTE: Suitable manpower shall be deployed for the job assigned with safety gears as & whenever required. Man power shall be deployed as per requirement, including holidays & late working if required.

230 mm thick soling Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge

Dismantling plain cement concrete Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge

Dismantling brick work Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Dismantling doors, windows Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Area 3.00 Sq.M and below

Dismantling tile work Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 10 mm and up to 25 mm

Dismantling Aluminium work Dismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge

Dismantling waterline pipes Dismantling G.I pipes/ PVC pipes of all diameter external work including excavation and refilling trenches after taking out pipes manually / by mechanical means including stacking of pipes within 100 m lead as per direction of Engineer-in-charge

Dismantling of C.I pipes Dismantling the following dia of C.I pipes including excavation, taking out the pipes manually / by mechanical means, breaking lead caulked joints, melting of lead, making into blocks including stacking of pipes within a lead of 200 m as per direction of Engineer-in-charge75 mm Dia to 200 mm Dia C. I pipe

Dismantling flushing cistern Dismantling flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 100 m lead

Dismantling old plaster / skirting/Tiling Dismantling old plaster /floor tiles/ skirting/dado tiles carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead

Lead charges Lead charges for lead Exceeding 2 KM but not exceeding 3 KM, by mechanical transport including loading, unloading, stacking / levelling etc.

Soil/tiles/debris/civil scrap excluding metal Note: The rates in respect of Item is applicable for NET Quantities arrived at after making deduction for voids @ 20% in respect of soil/debis and @ 50% in respect of Rock from corresponding STACK / TRUCK Measurement

All types of metal/wooden scrap materials to BARC’s scrap yard situated at TV stores.

SUNIL CONSTRUCTION