Establishment of Cold Room at SDAO office Ramnagar Under HADP project Promotion of Commercial Floriculture P14

Clearing of site by employing labour, tool and tackle and leveling of ground by employing men and machinery for start of work. The job includes labour cost, hire charges of tools and tackles, machinery and taxes as applicable.

Earthwork in excavation by manual means over area for leveling purpose including disposal of excavated earth up to 1m from cutting edge and should be disposed in near-by all kind of soil Quantity = 8x(3’x3’x3’) + 60’x1’-6’’x1-6’’ = 324 Cft = 9.17 Cum Area to be excavated keeping in view the earth quake resistance for which a MS mesh(10 mm) is to be provided in the base foundation of the plinth

Providing and laying of cement concrete (1:5:10) using 40mm nominal size nallah stone. Qty:- 8x(3’x3’x3’’) + 60’x1’x3’’ = 33Cft = 0.93 Cum

Providing and laying at or near ground level precast cement concrete in kerbs, edgings, etc as per approved pattern and setting in position with cement mortar 1:3 ( 1 cement: 3 coarse sand) including the cost of required centering, shuttering complete 1:2:4 ( 1: cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) Crushed. Quantity as per item No. 3 = 0.93 Cum

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead up to 50m and lift up to 1.5m. Qty = 12’x3’x3’’ x 8 + 60’x1’x3’’ x 2 + 15’x15’x1’ = 327 Cft = 9.25 Cum

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level - Mild steel and medium tensile steel bars 10mm bar = 1200’= [email protected] per metre= 225.67Kg 8mm bar = 150’= [email protected] per metre=18.05 Kg Total= 243.72Kg

Centering and shuttering including strutting, propping etc. and removal of form work for: 4.6.1 Foundations, footings, bases for columns Quantity = 33.44 m2

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) Qty :- 60’x1’x9’’ = 45 Cft = 1.27Cum

12 mm cement plaster to plinth wall of mix 1 : 4 (1 cement : 4 fine sand) Qty = 165 Sft = 15.32 Sqm

Cement concrete flooring and foundation as per the site requirement 1:2:4(1 cement:2 sand:4 graded stone finished with a floating coat of neat cement including cement slurry but excluding the cost of noising of steps complete. 50mm thick 20mm size stone aggregate. Floor area=225 Sft = 20.90 Sqm

Structural Steel work welded in built up section/ framed work including cutting, hosting, applying a priming coat using structural steel. In gratings, frames, guard bard, ladders, railings etc. 6 No. of truses including primer and enamel paint including nut bolts, kingpost, struts etc. (Sch-10.1) Column Square Hollow Pipe Section(100x100x5mm): 150ft = [email protected]/m= 536.29Kg MS Square Plate of size (300 x 300 x 8mm) @ 47.1 kg per Sqm Columns = Nos with plates at top ends Total = 4x 47.1 x 0.0929 = 17.50Kg Purlins/ Truss/ Rafter Rectangular Sections (80x40x3.2mm): = 250’ = 76.2m @ 5.50kg/m = 419.1Kg Total Weight = 972.89 Kg

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern. over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer- in-Charge. 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. Area = 400Sft = 37.16Sqm

Carriage of Sand aggregate below 40 mm, Carriage of Bazri aggregate 40 mm nominal size and above, Carriage of Steel and carriage of other allied material By Mechanical Transport including loading, unloading and stacking beyond 10 km upto 20 km per km

Fabrication and Providing of Slotted Angle Metal Racks of size 84”H x 23”L x 12”D 22 Gauge, 16 Gauge Angle with7 Shelves for storage and display of Wool items in the display rooms of the wool centre. Job is inclusive of the cost of material, transportation and all taxes etc

Supply and installation at site of Prefabricated PUF (Poly-Urethane Foam) Panels of size 100 mm thick Fire proof Panels for walls (PPGI finish on both sides) and 100 mm thick Color Coated Corrugated PPGI PUF for Roof to make a closed structure on the outer frame. Prefabricated Sandwich PUF panels with Cam toggle type fasteners fitted and self-locking PVC gaskets fitted on all sides of wall and ceiling/roof including rivets, Silicones, Anchor fastener, self drilling screw and all other allied accessories required for the installation/erection of PUF panels. a. Wall to wall cam locking system. Internal/External flashing to be provided. b. 60 mm flush type doors having size 3’x6’ for cultivation room and packing room. c. Heavy duty cast alloy handles with heavy duty hinges with chrome finish. Air right heavy duty sealing gasket below door with double sweep, posi seal closure cushions closing of door. d. Safety release knob to be provided from inside the door with PVC Strip Curtain. Temperature required in the room is upto 25˚C Total quantity = 750 Sft = 69.67 Sqm

Refrigeration Unit:-SITC of refrigerant unit of capacity 18000 BTU/Hr(420V/3Ph/50Hz) (1.5TR) for maintaining a temperature of 5 ˚C to 25˚ (or as per requirement of end user) around the year. The unit shall comprise of two machines one working and one standby with following features. a. Indoor unit (02 Nos) b. Outdoor unit (02Nos) compressor to be sealed heavy duty air cooled with low noise level and minimal vibration. MOC should be GI powder coated. Filter dryer can be internal/external. c. R407a/R22 refrigerant or any other equivalent as per OEM design. d. Control panel should have microprocessor based digital temperature controller/humidity controller cum indicator for easy readability with following features. i.It should protect device from single phasing, voltage unbalance, phase reversal and under/over voltage. ii. It should also show real time voltage between phase and neutral. iii. It should shut down the system in case of fault from pressure control/similar device. iv. It should have safety controls such as delay at start up and minimal disable time to protect compressor from close start. The job includes complete installation of refrigeration system with suitable MS Stands for Outdoor units, Constant Voltage Stabilizer for operation of machines and fitment of digital controller along with copper pipes, tees/elbows/reducers brazing charges and tools and tackles required for the execution of the job. e. The job also includes SITC of one no. centrifugal humidifier as per OEM Design for maintaining a desired humidity required for mushroom cultivation around the year.

Fresh air Damper /Blower/ Ducts/Plenum:-Supply and installation of air mixing chamber inside the cultivation room, Aluminum Damper for CO2 exhaust, fresh air damper system and return air as per site requirement. The Job includes SITC of blowers of requisite specifications as per OEM design along with all allied accessories. The job also includes providing/ fitting of Elbow Duct with Air filters for fresh air inlet and CO2 exhaust outside the plant along with installation of air plenum duct/air tight cloth duct with evaporator and poly duct inside the room for air distribution. It also includes fresh air dampers in the packing room along with pre filters for protection against insects and dust as and where required

Electrical fittings:- The job includes electric fittings along with embedding of PVC conduits in the walls with multi stranded electric cables with switch boxes and switch boards/Sockets/Switches/MCB’s of requisite amperage suitable for Refrigeration system/AC’s, Stabilizer, Blowers, Humidifier, Mono block pump, Vapor proof LED Lights, LED flood lights of suitable watts. Complete job includes cost of material and labour charges for the execution of job. Job also includes providing and laying of earth equipment’s for cold room and allied electrical equipment’s installed.

Providing/Fabrication of Mobile Structural Steel Library type ladder/stairs with platform of size 2’x2’ and height of ladder from ground upto platform deck 7’ fabricated out MS pies and angle of suitable size duly primed and painted as

Providing and Fitting of 10KVA Three Phase Oil Cooled Servo Stabilizer (AVR) of standard Make with microprocessor based control system, 100% copper wound, overload and short circuit protection, automatic shutdown in case of fault, output voltage 415V+/-1% under unstable voltage conditions. AVR to cover overhead by CGI Sheets.

Providing and Fitting of Portable 7.5 KVA Three Phase Silent Diesel Generator of standard Make air cooled, Electric Start 230V, Rated Frequency 50-60 HZ. Noise level 10 Db. Job includes fitting of cables of requisite rating and quantity to make the system operational. Job includes the cost of material, labour charges, transportation charges, installation charges and all taxes

Painting of the complete Unit by way of applying two coats of anti-corrosive superior quality metal primer and two coats of superior quality exterior paint on structural steel work. Job is inclusive of the cost of material, labour charges, transportation and all taxes etc