Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.3 CrAccepted-AOC 723 27 SHIVAJINAGAR SUDHARSHAN NIWAS NEAR POLICE GROUND BARSHI SOLAPUR 413 411 | BARSHI | SOLAPUR | MAHARASHTRA | 413411 | ₹15.3 Cr Quoted ₹15.0 Cr | L1 | Accepted-AOC 1st Lowest |
| 2 | L2₹16.4 CrRejected-Finance | ₹16.4 Cr | L2 | Rejected-Finance 2nd Lowest |
| 3 | Rejected-Technical PLOT NO 14 15 N 20 DYNA FILTERS PVT LTD PLOT NO 14 15 20 PUNE SOLAPUR RD HADAPSAR PUNE MAHARASHTRA 411028 UDYAM MH 26 0014110 27AACCD4903E1Z1 R M MII STATUS AS VERIFIED | PUNE | MAHARASHTRA | 411028 | - | - | Rejected-Technical As per report |
Tender Value
Refer Docs
EMD Value
₹13.3 L
Closing Date
2 Mar 2021, 3:00 pmClosed
Managing Director
Plot No.R-7, MarketYard, Gultekadi, Pune 411037
CW5 Erection of New Facility Centre for Sweet Orange at Pachod, Taluka Paithan, District Aurangabad
2021_CMTAD_635225_1
MSAMB/ENGG/ADB/MAGNET/CW5
Open Tender
Civil Works - Others
365 days
Pachod, Taluka Paithan, District Aurangabad
Please refer Tender documents.
3 documents required · 3 mandatory
₹3,540
₹13.3 L
Yes
Maharashtra State Agricultural Marketing Board
24 Sept 2021
12 Jan 2021
2 Mar 2021
12 Jan 2021
2 Mar 2021
4 Feb 2021
12 Jan 2021 - 21 Jan 2021
27 Jan 2021
Civil Work
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. Spec.No. MORTH 201(S. S. R. I. No. 2.09 & P. No. 26)
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Spec.No. : Means Bd.A.1 Page No.259(S. S. R. I. No. 21.02 & P. No. 197)
Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means Spec.No. : Means Bd.A.2 Page No.259 (S. S. R. I. No. 21.06& P. No. 197)
Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means. Spec.No. : Bd.A.3, Page No. 259. (S. S. R. I. No. 21.10 & P. No. 188)
Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means Spec.No. : Bd.A.4, Page No. 259.. (S. S. R. I. No. 21.14 & P. No. 188)
Filling in plinth and floors with approved excavated material in 15cm.to 20cm. layers including watering and compacting etc. complete. Spec. No Bd.A.10 Page No. 262 (S. S. R. I. No. 21.36 & P. No. 191)
Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Spec. No. Bd.A 11, Page No. 263 (S. S. R. I. No. 21.37 & P. No. 191)
Disposing of dismantling materials of R.C.C. stone/ brick masonry / derbies, excavated material etc from work site beyond the 5 km Spec. No.:As directed by Engineer in charge etc. complete. (Beed District D.S.R, Page No. 125, Sr. No. 486)
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. B Spec. No. As Directed By Engineer In Charge. (S. S. R.I. No. 21.22 & P. No. 199)
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. Spec. No. As Directed By Engineer In Charge. (S. S. R.I. No. 21.24 & P. No. 199)
Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No As director by engineer incharge. (S. S. R. I. No. 21.40 & P. No. 201)
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant ( Pan mixer ) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) ) Spec. No. Bd. E. 1 Page No287 (S. S. R. I. No. 24.01 & P. No. 217)
Providing and laying Cast insitu/Ready Mix cement concrete in M15 of trap/granite/quartzite/gneiss metal for steps including steel centering, form work, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.E.2 Page No. 288 and B.7 Page No 38 (S. S. R. I. No. 24.04 & P. No. 217)
Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401--Plant Mix Method and Grading - II Material Spec. No. MORTH 401 (S. S. R. I. No. 3.02 & P. No. 31)
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc). Spec. No. Bd. F.3 Page No. 298 and B.7, Page No. 38 (S. S. R. I. No. 25.13 & P. No. 222)
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec. No. Bd.F.5 Page No. 300 And B7, Page No 38. (S. S. R. I. No. 25.33 & P. No. 233)
Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.F.6 Page No. 300 and B.7, Page No.38 (S. S. R. I. No. 25.52 & P. No. 227)
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.F.8 Page No. 302 and B.7, Page No.38 (S. S. R. I. No. 25.72 & P. No. 227) Note:- Waterproofing Chemical Added For Tarrace Slab Casting.
Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.F.9 Page No. 303 and B.7, Page No.38 (S. S. R. I. No. 26.07 & P. No. 230)
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc). Spec. No. Bd.F.11 Page No. 304 and B.7, Page No. 38 (S. S. R. I. No. 26.19 & Page No. 231) Note:- Waterproofing Chemical Added For Water Tank Pardi Casting
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. : Bd.F. 13 Page No. 305. /I.S. 456 (2000) (S. S. R. I. No. 26.26 & Page No. 233)
Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.E. 3/Page No. 288/I.S. 456 (2000 (S. S. R. I. No. 24.16 & Page No. 221)
Providing and laying in situ cement concrete M30 with tremix treatment for 200mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. Spec. no. As directed by Engineer in charge (S. S. R. I. No. 33.31 & Page No. 277)
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.. Spec. No. Bd.F.17 Page No. 306. (S. S. R. I. No. 26.33 & Page No. 236)
Providing uncoursed rubble masonry of trap/granite/quartzite/gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls/in plinth of external walls including bailing out water manually, striking joints on un exposed faces and watering etc.complete. Spec. No. Bd.H.1 Page No. 329 (S. S. R. I. No. 28.01 & Page No. 257)
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Spec. No. Bd.G. 1. Page No. 313. (S. S. R. I. No. 27.01 & Page No. 254)
Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Spec. No. Bd.G.5 Page No. 315 (S. S. R. I. No. 27.05 & Page No. 254)
Providing and constructing masonry in Autoclaved Areaclaved ( Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size (625 X 240 X 230 / 150 mm ) thick in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in superstucture including,striking joints,racking out joints watering and scaffolding etc.complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 29.05 & Page No. 251)
Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size (625 x 240 x 100)mm in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in half brick thick wall including 2 hoop iron strips 25mm x 1.6mm at every third course,properly bend and bonded at ends scaffolding racking out\ joints and watering compete. Spec. No As director by engineer incharge (S. S. R. I. No. 29.06 & Page No. 259)
Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compoundand laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. Spec. No. As Directed By Engineer In Charge.(S. S. R. I. No. 31.04 & Page No. 255) For Toilet Blocks And Terrace
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 22.19.1 3 mm thick ( CPWD D.S.R. 2015-16 w.e.f July-2016 I. No. 22.19 & Page No. 385 ) For Terrace
Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing etc.(Excluding Tiles). complete.As directed by Engineer in charge. (S. S. R. I. No. 31.06 & Page No. 256) For Sunk Vertical Sides At Toilet Blocks
Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.As directed by Engineer in charge. (S. S. R. I. No. 31.05 & Page No. 256) For Flooring At Toilet Blocks
Providing and fixing Chicken Mesh Of 22 Gauge, With About 30 Cm. Width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / B.B.masonry and or tying by binding wire etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 32.26 & Page No. 262)
Providing Internal Cement Plaster 12mm Thick In Single Coat In Cement Mortar 1:4 Without Neeru Finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complet. Spec. No. Bd.L. 2 Page No. 368 (S. S. R. I. No. 32.04 & Page No. 260)
Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. Spec. No. Bd.L.1 Page No. 367 (S. S. R. I. No. 32.01 And Page No. 260)
Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete.Spec. As directed by Engineer in charge. (S. S. R. I. No. 32.21 & Page No. 262) For Water Tanks
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.Spec.No. : As Directed By Engineer In Charge. (I. No. 32.34 & Page No. 264)
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Spec . No. Bd. L.7 Page No.369. (S. S. R. I. No. 32.11 & Page No. 261)
Providing internal cement plaster 20mm thick in single coat in cement mortar 1:3 without neeru finish to stone masonry surfaces, in all positions including scaffolding and curing etc. complete. Spec. No. Bd.L.3 Page No. 368 (S. S. R. I. No. 32.08 And Page No. 268) For Below Texture Plaster
Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 32.32 And Page No. 263)
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete Spec. No .BDM-22, Page No. 390 (S. S. R. I. No. 33.18 & Page No. 268)
Providing and laying Machine Cut Machine Polished Kota Stone Flooring 25 mm To 30 mm Thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Spec. No. Bd.M.3 Page No. 380 (S. S. R. I. No. 33.06 & Page No. 265)
Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bedof 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring Spec. No. Bd.M.12 Page No. 385. (S. S. R. I. No. 33.40 & Page No. 271)
Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness anconfirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. b) Skirting Spec. No. Bd.M.12 Page No. 385.. (S. S. R. I. No. 33.41 & Page No. 279)
Providing and laying ceramic tiles having size 30cm. x 45cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. Spec. No. Bd.M.13 Page No. 386. (S. S. R. I. No. 33.26 & Page No. 277)
Providing and fixing machine cut machine polished 18mm to 20mm thick telephone black/ AmbaWhite/ Catbary brown/ RBI red/ Ocean Brown granite stone for treads and risers of steps and stair cases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Spec. No. Bd.M.22 B/Page No. 390. (S. S. R. I. No. 33.35 & Page No. 278)
Providing and fixing heavy duty interlocking concrete Grey paving blocks of 80mm thickness of having a strength of 300kg/Sq.cm. of approved quality and shape on a bed of crushedsand of 25 to 30mm thick including skirting joints and cleaning etc. complete. Spec. No. As directed by engineer incharge. . Spec. No. As directed by engineer incharge. (S. S. R. I. No. 33.50 & Page No. 280)
Providing and laying Antiskid Ceramic tiles of approved quality of size 30cm x 30cm and confirming to IS 15622-2006 (Group-BIIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Spec. No. Bd.M.12 Page No. 385. (S. S. R. I. No. 33.67 & Page No. 283)
Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. Spec. No .As directed by Engineer-In- Charge (S. S. R. I. No. 33.68 & Page No. 275) For Door Frames
Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding / moulding the edges etc. complete. One side polish Spec. No. Bd.M.35 B / Page No.393 (S. S. R. I. No. 33.37 & Page No. 270)
Providing 25 mm To 30 mm Thick Partition Of Polished Black Kadappa Stone Slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. b) Both Side Polish. Spec. No. Bd.M.35 B /P No.393 ( S. S. R. I. No. 33.33 And Page No. 270)
Providing and applying Priming Coat on Concrete / Masonry / Asbestos Cement/ Plastered Surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 35.21 & Page No. 282)
Providing and applying Plastic Emulsion Paint Of Approved Quality, Colour And Shade To New Surface In Three Coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. Spec. No. Bd.P.6 Page No.414. & Preapproval of Superintending Engineer. (S. S. R. I. No. 36.14 & Page No. 285)
Providing and applying Two Coats Of Exterior Acraylic Emulsion Paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. Spec. No. As directed by the engineer in charg. (S. S. R. I. No. 35.25 & Page No. 283)
Providing and fixing Frame With / Without Ventilator Of Size As Specified With Country Cut Teak Wood For Doors And Windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 39.01 & Page No. 306)
Providing Antitermite Treatment To The Wooden Frames Of Doors / Windows of the existing building as per I.S. 6313 (Part-III) by drilling 6mm dia. holes at four corners on one side and four corners on other side at a downward angle of about 45 degree at the junction of wood work and masonary and injecting 150 ml. of chlorodane 5% W.C. and sealing by filling putty etc. complete covering 2 years guarantee on bond paper. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 21.26 And Page No. 190)
Providing and fixing Fiber Glass Reinforced Polyster Door Shutter 30 mm Thick As Per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. Spec. No. As directed by Engineer in charge. (S. S. R. I. No. 39.58 And Page No. 321 For Toilet Doors
Providing and fixing Solid Core Flush Door Shutter In Single/Double Leaf 32 mm Thick Decorative Type Of Exterior Grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Spec. No. BD-T-34 Page No. 499. (S. S. R. I. No. 39.09 And Page No. 307) For Main Doors And Lab Doors
Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating with box. Spec as directed by engineer in charge. (S. S. R. I. No. 39.43 & Page No. 317)
Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Spec as directed by engineer in charge. (S. S. R. I. No. 39.68 And Page No. 323)
Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of over all size 0.90mx2.40m with aluminium door frame of powder coated section 101.60x44.75mm, 3.18mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150mmx44.5mmx3.00mm thick top rails 47.62x44.45mmx3.00mm thick, vertical style 47.62x44.45mm,3.00mm thick and for shutter plain glass panes 5mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc., I.S.I. mark, with bijagiri having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length tower bolts, 150mm diam. pad handle, etc. as per detailed design and drawing or as directed by engineer incharge including all materials , labours, and equipment etc. complete Spec as directed by engineer in charge. (S. S. R. I. No. 39.63 And Page No. 330)
Providing and fixing in position extruded aluminium partitions having frame made out of extruded tubular section of size 65mm x 40mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 12923 1990 , laminated on both sides, Nova teak or equivalent with aluminium glazing clips of size 12 mm x 12 mm (conical) as per drawing etc. complete. Spec as directed by engineer in charge. (S. S. R. I. No. 39.73 And Page No. 332)
Providing and Fixing of Mineral Fibre Board Acoustical Suspended Ceiling System with ultima (Bevelled Tegular) Edge Tiles of size 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance 85%, Thermal Conductivity k= 0.052-0.057w/mK, Colour White, Fire Performance UK Class 0/ Class1 (BS 476 pt-6&7) in module size of 600x600x20mm, suitable for Green Building application, with Recycled content of 32%. The tile shall be laid on precoated G.I. channel on XL 2 Clip having a web height of 32mm with 15mm wide T-section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200mm and 600mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.7Kgs/M2 and minimum pull out strength of 100Kgs.. The T Sections have a Galvanizing of 90grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete. Spec as directed by engineer in charge. (S. S. R. I. No. 38.45 And Page No. 309)
Providing and fixing mild steel grill work for windows, ventilators etc. 20kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Spec. No. Bd.U.1 Page No. 537 (S. S. R. I. No. 40.01 And Page No. 329)
Providing and fixing jali fly proof for windows, ventilators etc. as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (S. S. R. Material No. 20 And Page No. 517)
Providing and fixing during laying in R. C. C. Slab rectangular 2 mm thick M.S. sheet fan hook box of size 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 26.68 And Page No. 253)
Supplying and Erecting Pre Engineering Building (PEB ) Structure as per Detail design and drawing of Primery member such as columns, rafter, monitor roof, gable end columns, crane and secondery member such as roof bracing, columns bracings, purlins, wall girt, cleat clips, eves strut, hanger bracing, sag rod should be confirming to IS CODE - 800 & 875, 1893, AISC, MBMA. All steel supply should be in sound condition. All the fabrication work should be done as per IS-800. All structural member should be weld should be confirm IS-816, welding steel confirming to IS-2062,8500, used welding electrodes confirming to IS-814 and necessery size nut bolt including fabriction work of Canopy and valley gutter as per drawing, cleaning to remove dirt, grease, oil and loose mill, one coat of anticorrosive paint and two coats of synthetic enamle paint shall be confirming to IS-102,104. and all Provisions for elecrical lumineries and fitting fixing with all materials supply, transportation to place of work. Spec. No. As Directed By Engineer In Charge. (NON SSR)
Providing and fixing colour coated Zincalume (R) AZ150 (min150gms/sq.mt. total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45mm Base Metal Thickness (BMT) (0.5mm TCT), Hi-strength steel with min. 550MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLOR BOND (R) steel quality super durable polyester paint coat (within organic pigment). The paint shall have a total coating thickness of nominal 35um, comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom.950-1050 mm effective cover width and nominal 25-30mm deep ribs with subtles quarefluting in the five panat nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25um Zinc-Tin alloy coated, Hexhead, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) Spec. No. Directed as per engineer incharge (S. S. R. I. No. 38.34 & Page No. 302)
Providing and fixing Turbo Ventilators 24" with necessery provision to close & protect sheet egder, with necessery cutting of windows / dors and opning as per opning schedule, including fixing with approved self tapping screws, nut bolt and EPDM washers and scaffolding etc. Complete. Spec. No. As Directed By Engineer In Charge. ( Material No. 42 Page No. 516 )
Providing and fixing 900mm high S.S. 304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports space dat 1.5m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No.40.07 And Page No. 330) For Staircase
Painting letters upto 20cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete. Spec. No. MORTH801 (S. S. R. I. No. 6.01 & Page No. 54)
Executive's Table @ 1800L x 900D x 750HT Providing & Fixing of Table @ 1800L x 900D x 750HT-TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18mm thick Prelaminated particle board with PVC edge band as per drawing. Spec.No. Directed as per Engineer In-Charge. (S. S. R. I. No.51.21 And Page No. 460)
Providing & Arrangemnt of Mid Back, ECOCTS Mechanism, Fixed Armrest, Gas lift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No.51.43 And Page No. 466)
Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. Spec. No. Bd.C.2 Page No. 275 (S. S. R. I. No. 42.17 & Page No. 353)
Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. Spec. No. Bd.V.46 Page No.576. (S. S. R. I. No. 42.19 & Page No. 353)
Providing and fixing European Type White Glazed Earthenware Coupled Closet Symphonic Trap With symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. Spec. No. As Directed By Engineer In Charge (S. S. R. I. No. 42.34 & Page No. 355)
Providing and fixing Coloured Glazed Earthenware Wash Hand Basin Of 63 Cm x 45 Cm Size including cold water pillar tap / cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall.. Spec. No. Bd.V.30 Page No.565 (S. S. R. I. No. 41.74 & Page No. 349)
Providing and fixing White Glazed Earthenware Lipped Flat Back / Corner Type Urinal with PVC 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. Spec. No. Bd.V. 26 Page No. 564. (S. S. R. I. No. 41.60 & Page No. 347)
Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. Spec. No. As directed by Engineer in charge (S. S. R. I. No. 42.83 & Page No. 362)
Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 42.82 & Page No. 361)
Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets / union nut etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 42.79 & Page No. 361)
Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 42.32 & Page No. 355)
Providing and fixing Chromium Plated Towel Rod 16 mm Dia And 75 Cm. In Length including all accessories complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 42.31 & Page No. 355)
Providing and fixing 450 mm x 550 mm Size Superior Type Belgium Mirror with 16mm dia. nickel plated towel rod etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 42.20 & Page No. 353)
Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating , bend, connecting piece of UPVC pipe up to the outside face of wall , making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 43.18 & Page No. 367)
Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 42.51 & Page No. 358)
Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. Spec. No. Bd.V.38 Page No.572. (S. S. R. I. No. 42.03 & Page No. 351)
Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 42.36 & Page No. 355)
Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 42.37 & Page No. 355)
Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 42.87 & Page No. 363)
Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 43.25 & Page No. 369)
Providing and fixing on Walls / Ceiling / Floor 15 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge (S. S. R. I. No. 42.55 & Page No. 358)
Providing and fixing on Walls / Ceiling / Floor 20 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge (S. S. R. I. No. 42.56 & Page No. 358)
Providing and fixing on Walls / Ceiling / Floor 25 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge (S. S. R. I. No. 42.57 & Page No. 359)
Providing and fixing on Walls / Ceiling / Floor 32 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge (S. S. R. I. No. 42.58 & Page No. 359)
Providing and fixing on Walls / Ceiling / Floor 40 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge (S. S. R. I. No. 42.59 & Page No. 359)
Providing and fixing on Walls / Ceiling / Floor 50 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge (S. S. R. I. No. 42.60 & Page No. 359)
Providing and fixing 40 mm diameter water meter with nonreturn valve including strainer, sockets / union nut and including water meter box making locking arrangement and lock. [Without chamber] (S. S. R. I. No. 41.29 & Page No. 345)
Providing and fixing 50 mm diameter water meter with nonreturn valve including strainer, sockets / union nut and including water meter box making locking arrangement and lock. [Without chamber] (S. S. R. I. No. 41.30 & Page No. 345)
Providing and fixing 50 mm dia. Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. Material No. 65 & Page No. 520)
Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level. (S. S. R. I. No. 48.48 & Page No. 406)
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well-casing pipe of 150mm dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge. (S. S. R. I. No. 48.49 & Page No. 406)
Providing and fixing 20 to 25 mm thick Rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) Spec .No. Bd. J.2 Page No. 355 (S. S. R. I. No. 31.13 & Page No. 266)
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Spec. No. Bd.C.2 Page No. 275 (S. S. R. I. No. 23.01 & Page No. 223)
Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. Spec. No. Bd.V.38 Page No.572. (S. S. R. I. No. 42.02 & Page No. 351)
Providing & constructing Brick Masonry Inspection Chamber 60 Cm x 45 Cm x 90 Cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. lid 65 kg with frame fixed in cement concrete etc. complete with R.C.C. Cover medium duty 140 kg with frame etc complete. Spec. No. Bd.V.43 Page No.574. (S. S. R. I. No. 42.12 & Page No. 352)
Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. Spec. No. Bd.V.43 Page No.574. (S. S. R. I. No. 42.13 & Page No. 352)
Providing and constructing Ductile Iron circular manhole 45 cm dia. At top 90 cm at bottom up to 1.80 meter to 2.70 meter depth including excavation, laying 1:4:8 cement concrete bedding 15 cm thick burnt brick mansonry with 1:1 cement mortar plaster 25 mm thick inside and outside 20 mm (1:3) ductile iron heavy type cover with ring 125 kg in weight. High strength. More life and Durability, Good Antiskid Grip, Suitable to heavy theatric loading, Light weight casting after cost benefits for Transportation Refilling etc. as per requirement. with prior approval of concerned Superitending Engineer. Spec. No. As directed by Engineer-in-charge (S. S. R. I. No. 50.31 & Page No. 450)
Providing and laying Concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec No. Bd.V.41, Page No. 573 (S. S. R. I. No. 42.09 & Page No. 351)
Providing and laying concrete pipes of I.S. NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.. Spec. No. Bd.V.41, Page No. 573 (S. S. R. I. No. 42.07 & Page No. 351)
RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge (S. S. R. I. No. 48.46 & Page No. 405)
Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.). (S. S. R. I. No. 38.04 & Page No. 297)
Excavation for road way in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts up to a lead of 50m. and spreading for embankment or stacking as directed. Spec. No. MORTH 301 (S. S. R. I. No. 2.11 & P. No. 27)
Excavation for Roadway In Hard Murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. Spec. No. MORTH 301 (S. S. R. I. No. 2.13 & P. No. 27)
Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. Spec. No. MORTH 305 (S. S. R. I. No. 2.25 & P. No. 28)
Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources) Spec. No. MORTH 305 (S. S. R. I. No. 2.28 & P. No. 29)
Watering And Compacting Of Embankment Formed Of Materials Obtained From The Road Cutting within a lead of 50 m, not less than 97 % of standard Proctor density after laying them in layers of 20 cm. to 30 cm. with vibratory roller. Spec. No. MORTH 305 (S. S. R. I. No. 2.23 & P. No. 28)
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means -Grading I (Using Screening Type B (11.2 mm) Aggregate) Spec. No. MORTH 404 (S. S. R. I. No. 3.19 & P. No. 33)
Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates). Spec. No. IRC-SP-20, 2002 Clause No. 8.7.3 (S. S. R. I. No. 3.35a & P. No. 36)
Providing and applying Tack Coat on the prepared surface heating by flames in Boiler and spraying bitumen with sprayer on Concrete surface treated with primer @ 3.25 kg/10 Sqm (VG-30 bulk bitumen rates are considered to arrive at rates) Spec. No. MORTH 503 (S. S. R. I. No. 3.33 & P. No. 36)
BITUMINOUS MACADAM: Providing and laying bituminous macadam using crushed aggregate of Grading 1, premixed with bituminous binder, transported at site with VTS, laid over a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve the desired density for 80/100 mm compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per IRC-27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers,automatic synchronization of bitumen and aggregate fedder,built in dust controller system and PLC for Drum Mix plant ,Sensor paver,and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen 3.30% of specified grade (VG-30 bulk bitumen rates are considered to arrive at rates) Spec. No. MORTH 504 (S. S. R. I. No. 3.40 & P. No. 39)
Providing and laying Semi Dense Bituminous Concrete Using Crushed Aggregates Of Grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for50 mm compacted thickness with specified grade of Bitumen,Excluding prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver Vibratory roller with Stone Dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates) Spec. No. MORTH 509 (S. S. R. I. No. 3.48 & P. No. 40)
Providing and fixing Factory Made Hydraulically Pressed Mechanically Vibrated And Compacted Precast Inter Locking Cement Concrete Paving Blocks 80mm Thick In M-40 Grade of approved size and shape for City streets, small /medium market roads, low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete. Spec. No. IRC-SP-63 (S. S. R. I. No. 5.20 & P. No. 51)
Providing and casting in Situ Or Precast Tapering R. C. C. M20 Mountable Type Kerb Without Gutter (as per IRC 86 1983) embedded 125mm below ground level over M10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering Incharge. Using Concrete Batching and Mixing Plant Spec. No. MORTH 408 (S. S. R. I. No. 7.03 & P. No. 87)
Providing and applying Two Coats Of Synthetic Enamel Paint Of Approved Colour To New / Old Structural Steel Work And Wood Work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. Spec. No. Bd.O.5 Page No.405 (S. S. R. I. No. 35.07 & P. No. 286)
Painting Line, Dashes, Arrows Etc On Roads In Two Coats On New Work With Ready Mixed Road Marking Paint confirming to I.S. 164 on Bituminous surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control a. Over 10 Cm Wide New Surface. Spec. No. MORTH 801 (S. S. R. I. No. 6.08 & P. No. 58)
Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 900mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. Spec. No. CD.7 Page.No. 162 (S. S. R. I. No. 11.11 & P. No. 104)
Providing Flush Grooved Pointing With Cement Mortar 1:3 For Stone Masonry Work including scaffolding and curing etc. complete. Item Spec. No. Bd. L.15 Page No. 372 (S. S. R. I. No. 32.17 & Page No. 269)
Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45mm dia G.I. pipe (Rezan/concenti Deletedire 0.75mm dia) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50x50x6mm at 2.5mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No.40.07 And Page No. 330)
Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet over flow pipe inclusive of all tanks capacity between 200 to 1000 liters Spec. No. As directed by Engineer in charge (S. S. R. I. No. 42.53 & Page No. 358)
Handicap Toilet Block
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Spec.No. : Means Bd.A.1 Page No.259(S. S. R. I. No. 21.02 & P. No. 197)
Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means Spec.No. : Means Bd.A.2 Page No.259 (S. S. R. I. No. 21.06& P. No. 197)
Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means Spec.No. : Bd.A.3, Page No. 259.(S. S. R. I. No. 21.10& P. No. 197)
Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means Spec.No. : Bd.A.4, Page No. 259.(S. S. R. I. No. 21.14& P. No. 198)
Filling in plinth and floors with approved excavated material in 15cm.to 20cm. layers including watering and compacting etc. complete. Spec. No Bd.A.10 Page No. 262 (S. S. R. I. No. 21.36 & P. No. 191)
Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Spec. No. Bd.A 11, Page No. 263 (S. S. R. I. No. 21.37 & P. No. 191)
Disposing of dismantling materials of R.C.C. stone/ brick masonry / derbies, excavated material etc from work site beyond the 5 km Spec. No.:As directed by Engineer in charge etc. complete. (Beed District D.S.R, Page No. 125, Sr. No. 486)
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. B Spec. No. As Directed By Engineer In Charge. (S. S. R.I. No. 21.22 & P. No. 189)
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. Spec. No. As Directed By Engineer In Charge. (S. S. R.I. No. 21.24 & P. No. 199)
Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No As director by engineer incharge. (S. S. R. I. No. 21.40 & P. No. 201)
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant ( Pan mixer ) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) ) Spec. No. Bd. E. 1 Page No287 (S. S. R. I. No. 24.01 & P. No. 217)
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc). Spec. No. Bd. F.3 Page No. 298 and B.7, Page No. 38 (S. S. R. I. No. 25.13 & P. No. 222)
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec. No. Bd.F.5 Page No. 300 And B7, Page No 38. (S. S. R. I. No. 25.33 & P. No. 225)
Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.F.6 Page No. 300 and B.7, Page No.38 (S. S. R. I. No. 25.52 & P. No. 227)
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.F.8 Page No. 302 and B.7, Page No.38 (S. S. R. I. No. 25.72 & P. No. 227) Note:- Waterproofing Chemical Added For Tarrace Slab Casting.
Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.F.9 Page No. 303 and B.7, Page No.38 (S. S. R. I. No. 26.07 & P. No. 230)
Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.E. 3/Page No. 288/I.S. 456 (2000 (S. S. R. I. No. 24.16 & Page No. 221)
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.. Spec. No. Bd.F.17 Page No. 306. (S. S. R. I. No. 26.33 & Page No. 236)
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Spec. No. Bd.G. 1. Page No. 313.
Providing and constructing masonry in Autoclaved Areaclaved ( Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size (625 X 240 X 230 / 150 mm ) thick in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in superstucture including,striking joints,racking out joints watering and scaffolding etc.complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 29.05 & Page No. 251)
Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compoundand laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. Spec. No. As Directed By Engineer In Charge.(S. S. R. I. No. 31.04 & Page No. 255) For Toilet Blocks And Terrace
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 22.19.1 3 mm thick (S. S. R. I. No. 22.19 & Page No. 385)
Providing and fixing Chicken Mesh Of 22 Gauge, With About 30 Cm. Width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / B.B.masonry and or tying by binding wire etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 32.26 & Page No. 262)
Providing Internal Cement Plaster 12mm Thick In Single Coat In Cement Mortar 1:4 Without Neeru Finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complet. Spec. No. Bd.L. 2 Page No. 368 (S. S. R. I. No. 32.04 & Page No. 260)
Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete.Spec. As directed by Engineer in charge. (S. S. R. I. No. 32.21 & Page No. 262) For Water Tanks
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.Spec.No. : As Directed By Engineer In Charge. (I. No. 32.34 & Page No. 264)
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Spec . No. Bd. L.7 Page No.369. (S. S. R. I. No. 32.11 & Page No. 261)
FLOORING & DADO / SKIRTING
Providing and laying chequered tiles ofapproved qualityof size 30cmx30cm, confirming to corresponding I.S.forflooring in required position laid on a bed of1:4 cement mortar including cement float,filling joint with cement slurry cleaning curing etc. complete. Spec. No.Bd. M-3 page No. 380 (S. S. R. I. No. 33.66 & Page No. 283)
Providing and laying Antiskid Ceramic tile sof approved quality of size 30cmx30cma nd confirming toI S15622-2006(Group-BIIA) for antiskid flooring in required positionlaidonabedof1:4 cement mortar including cement float,filling joint with cement slurry cleaning curing etc. complete. Spec. No. Bd.M.3 Page No. 380 (S. S. R. I. No. 33.67 & Page No. 283)
Providing and laying vitrified mirror/glossy finish tile s having size 590mmto605mmx590mm to 605mm of 8to10mm thickness and confirming to IS.15622-2006 (groupBla) of approved make,shade and pattern fordadoandskirting inrequired position fixed in 1:4 cement mortar including neat cement float,filling joints,curingandclearing etc. complete(S. S. R. I. No. 33.41& Page No. 279)
Providing and applying Priming Coat on Concrete / Masonry / Asbestos Cement/ Plastered Surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 35.21 & Page No. 282)
Providing and applying washable oil bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces (excluding the primer coat) complete.(S. S. R. I. No. 36.11 & Page No. 285)
Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. (S. S. R. I. No. 35.26 & Page No. 289)
Providing and fixing green marble of 18 to 20 mm thick for doorframe/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete. (S. S. R. I. No. 33.48 & Page No. 280)
Providing and Fixing 30MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size19x19mm for styles and15x15mm for the top and bottom rails, M.S frames hall have acoatofmetelprimer of approved make and manufacture. M.S frame shall be covered withheatmouledPVC'C'channelmadefrom 5mm (+/0.25)thick prelaminated sheet of density 600kg/cbm, ofsize30mm thickness 70mm widthout of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side for mingstiles;and 5mm thick,95 mm wide PVCsheet out of which 75mm shall be faltand 20mm shall be tapered in 45 on the inner side to form top and bottom railand 115mm wide PVC sheet out of which 75mm shall be faltand 20mm shall be tapered on both sides toform lockrail.Top, bottom and lockrailshall be provided either side of the panel. An additional 5mm(+/0.25) thick PVC strip of 20mm width is to be stuck on the bottom side of the 'c 'channel prelaminated paneling of 5mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/sealed to the styles and rails with 5mm(+/0.25)x30mm PVC sheet beading on either side and joined together with solvent cement adhesive etc,10mm thickness (5mm(+/0.25)x2nos) 20mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3nos M.S.powder coated but hinges of size 100mmx25MMx2mm using 32mm long steel screws drilled suitable to pass through bothth ewalls of the M.S tube. Other hard wares should be fixed with 19x6mm size steel screws including fixture fasting. Complete as per direction of engineer in charge.(S. S. R. I. No. 39.47 And Page No. 326)
Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium rames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Spec as directed by engineer in charge. (S. S. R. I. No. 39.43 & Page No. 324)
Providing and fixing mild steel grill work for windows, ventilators, etc. 20 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.. Spec. No. Bd.U.1 Page No. 537 (S. S. R. I. No. 40.01 And Page No. 329)
Providing and fixing 450mmx550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. (S. S. R. I. No. 42.20 And Page No. 353)
Providing and fixing 900mm high S.S. 304 Grade Stainless steel railing with 40mm diameter and 1.5mm thickat top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete Spec. No. As Directed By Engineer In Charge. (S. S. R. 2019-20 I. No.40.07And Page No. 330) For Staircase
Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete 2019-20 I. No.42.87And Page No. 363)
Providing and fixing coloured glazed earthenware wash hand basin of 63 cm x 45 cm Size including cold water pillar tap / cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall.. Spec. No. Bd.V.30 Page No.565(S. S. R. I. No. 41.74 And Page No. 359)
Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete. Spec. No. As Directed By Engineer In Charge.(S. S. R. I. No. 42.82 And Page No. 361)
Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets / union nut etc. complete. Spec. No. As Directed By Engineer In Charge.(S. S. R. I. No. 42.79 And Page No. 361)
Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. Spec. No. As directed by Engineer in charge(S. S. R. I. No.42.83 And Page No. 362)
Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery upto destination hoisting and fixing of accessories such as inlet, outlet over flow of all tanks capacity above 1000 to 20,000 litres Spec. No. As directed by engineer incharge. (S. S. R. I. No. 42.54 & Page No. 358)
Providing and fixing on Walls / Ceiling / Floor 25 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge (S. S. R. I. No. 42.57 & Page No. 359)
Providing and fixing on Walls / Ceiling / Floor 32 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge (S. S. R. I. No. 42.58 & Page No. 359)
Providing and fixing on Walls / Ceiling / Floor 40 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge (S. S. R. I. No. 42.59 & Page No. 359)
Providing and fixing on Walls / Ceiling / Floor 50 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge (S. S. R. I. No. 42.60 & Page No. 359)
Providing and fixing on Walls / Ceiling / Floor 15 mm Dia. CPVC Pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge (S. S. R. I. No. 42.55 & Page No. 358)
Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 42.37 & Page No. 355)
Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. Spec. No. As Directed By Engineer In Charge. (S. S. R. I. No. 42.36 & Page No. 355)
Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete (S. S. R. I. No. 42.86 & Page No. 362)
Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete chanels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete (S. S. R. I. No. 42.11 & Page No. 352)
PLANTATION WORK
Garden soils :- Supplying one side fresh garden soil well sieved 90% to pass through IS sieve of 10 mm size free from stone rubbish like dried grass root & other such materials the soil should be fresh from quarry. The colour of the soil generally be red. The soil will be measured by measuring box. (Item include Royalty charges. Corporation types transporting loading Unloading etc. complete. Horticulture DSR 1/2
Suplying & laying well quality of manuar required for small, large tress including mixing with soil , watering, transportation at site etc. completed Horticulture DSR 2/2
Saplings of flowering/shadytrces Gulmohar, Raintree, Peltophorum etc (one year old) Horticulture DSR 8/3
Saplings of Small & medium Ornamental flowering plants , Thuja,Cupresus plants ornamental Ficus, Mussanda etc. Horticulture DSR 9/3
Rose Plant :- Excavating pit with size 0.3x0.3x0.3 meter removing & conveying unwanted stuff of a required distance as directed filling the fresh garden soil in minor in 3:1 proportion to a required height of 0.3 meter mixing the soil & minor levelling, watering on previous night. Planting 40 to 50 cm height healthy plant of required rose verity mainaining till well established by watering weeding, sturring,prunning, replacing the casualities etc. complete. Horticulture DSR 9/5
Mogra Plant/Creepers/Climbers:- Excavating pit with size 0.3x0.3x0.3 meter removing & conveying unwanted stuff of a required distance as directed filling the pit upto excavated material upto a height 15 cm. & ramming height of 15 cm. with fresh garden soil in minor in 3:1 proportion mixing the soil & minor levelling, watering on previous night. Planting (one year old) healthy plant as per specification mainaining till well established by watering weeding, sturring,prunning, replacing the casualities etc. complete. Horticulture DSR 10/6
Planting large flowering/shady trees:- Digging pit with size 0.9 x 0.9 x 0.9 meter. Removing & conveying unwanted stuff of a required distance as directed filling the pit upto excavated material upto a height 30 cm. & ramming height of 60 cm. with fresh garden soil in minor in 3:1 proportion mixing the soil & minor levelling, watering on previous night. Planting (one year old) healthy trees sapling as per specification mainaining till well established by watering weeding, sturring of soil replacing of casualities etc. complete. Horticulture DSR 12/6
Planting small & medium size ornamental flowering plant:-Digging pit with size 0.6 x 0.6 x 0.6 meter. Removing & conveying unwanted stuff of a required distance as directed filling the pit with fresh garden soil & farm yard minor upto a height of 0.6 meter in 3:1 proportion mixing the soil & minor levelling, watering on previous night. Planting (one year or two year old) healthy plant sapling as per specification mainaining till well established by watering, weeding, sturring of soil replacing of casualities etc. complete. Horticulture DSR 11/6
Preparing instant Lawn :- Excavating the ground to a required depth of 20 cm. removing & conveying unwanted stuff to a required distance as directed filling fresh garden soil in minor in 3:1 proportion to a height of 20 cm. mixing soil & minor throughly well levelling with required slope light watering on previous night, rolling on surface. Fixed readymade lawn truf rolls or slab of reqired verity as directed. ramming on it for proper fixing & mainaining till well establish by watering, weeding, clipping or moving etc. complete. Horticulture DSR 3/4
Preparing Edging or border:- Excavating the ground to a required depth of 20 cm. removing & conveying unwanted stuff to a required distance as directed filling fresh garden soil in minor in 3:1 proportion to a required height of 20 cm. mixing , levelling , watering the same planting suitable verity of edging plants & rooted cutting at distance of 15 cm. between plants to plants and row to row watering & maintaining till well grown to te stage of prunning Horticulture DSR 4/4
Preparing Shrubbery:- Excavating the ground to a required depth of 30 cm. removing & conveying unwanted stuff to a required distance as directed. Providing and filling fresh garden required distance as directed. Providing and filling fresh garden soil and manure in excavated area in 3:1 proportion to a required height of 30 cm. Mixing , levelling , watering on previous night. Planting well rooted shrubs 0.5 mtrs. apart as directed and maintaining till well established by watering, weeding, strring replacing of casualties etc. complete. Horticulture DSR 8/5
SOLID WASTE DISPOSAL
Dustbin 240 Litre Blue WB-240 Dimensions : 725 x 580 x 1075 mm ( 107x72x58cm ) Heavy Duty Sunproof Waste Garbage Bins Wheeled Bins Easy to maintain & Use Envirnoment Friendly Long Lasting Capacity : 240 Litre (Non SSR)
SEDIMENTATION TANK
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Spec.No. : Means Bd.A.1 Page No.259(S. S. R. I. No. 21.02 & P. No. 197)
Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means Spec.No. : Means Bd.A.2 Page No.259 (S. S. R. I. No. 21.06& P. No. 197)
Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means. Spec.No. : Bd.A.3, Page No. 259. (S. S. R. I. No. 21.10 & P. No. 188)
Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means Spec.No. : Bd.A.4, Page No. 259.. (S. S. R. I. No. 21.14 & P. No. 188)
Filling in plinth and floors with approved excavated material in 15cm.to 20cm. layers including watering and compacting etc. complete. Spec. No Bd.A.10 Page No. 262 (S. S. R. I. No. 21.36 & P. No. 191)
Disposing of dismantling materials of R.C.C. stone/ brick masonry / derbies, excavated material etc from work site beyond the 5 km Spec. No.:As directed by Engineer in charge etc. complete. (Beed District D.S.R, Page No. 125, Sr. No. 486)
Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No As director by engineer incharge. (S. S. R. I. No. 21.40 & P. No. 201)
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant ( Pan mixer ) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) ) Spec. No. Bd. E. 1 Page No287 (S. S. R. I. No. 24.01 & P. No. 217)
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc). Spec. No. Bd. F.3 Page No. 298 and B.7, Page No. 38 (S. S. R. I. No. 25.13 & P. No. 222)
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.. Spec. No. Bd.F.17 Page No. 306. (S. S. R. I. No. 26.33 & Page No. 236)
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Spec. No. Bd.G. 1. Page No. 313.
Providing Internal Cement Plaster 12mm Thick In Single Coat In Cement Mortar 1:4 Without Neeru Finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complet. Spec. No. Bd.L. 2 Page No. 368 (S. S. R. I. No. 32.04 & Page No. 260)
ELECROMECHANICAL WORK
Supplying , erecting & terminating 3 x 300 sq. mm. aluminium 11 kV(UE), XLPE armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. CBHT
Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT
Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT
Supplying & laying (including excavation)25 cm dia RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).
Supplying & erecting cast iron cable indicator plate buried along with route of cable for PVC / XLPE armoured cable as per specification No. CB-CIP
Supplying, erecting, testing, commissioning 11 KV HT metering cubical (compact type) approved by MSEDCL/licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle and channel, painted with powder coating / epoxy paint of required shade copper bus bar size 25x6 mm electronic security lock and heavy duty mechanical lock, with counter meter for measuring no of times the opening of doors, top side cover (CT,PT cover) interlock with meter doors, epoxy coated 3 nos CT having required ratio between 75/5 A to 100/5 A, VA10,class0.2S, 11000/V3/110/V3 VA 50, class 0.2 epoxy terminal block suitable for provided trivector meter, and provision for incoming and outgoing cables etc. complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation
Supplying and erecting extendable / non-extendable outdoor type 11 kV 630A, load break isolator switch with fuses of required rating on provided MS channels / trench / foundation as per specification no SW-HTS / LBS
Providing Cement concrete foundation for pump in 1:2:4 with required size and length of foundation bolts and nuts (cost with wooden box is included). (Here plinth for Metering Cubical, LBS and DG set)
Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 315 kVA, oil immersed and naturally cooled outdoor type, copper wound transformer, delta /star connected additional neutral brought out on load side, temperature rise should not exceed 40 o C by thermometer in oil and 45 C by the resistance in winding at full load rating, with HV tapping (with off load tap changer) off load + 5 to -10 in steps of 2.5%, with standard accessories complete with test certificate with losses below 1860 Watts at 50% load, 5300 Watts at 100% load as per IS:1180 - 2014 energy efficiency level II with necessary permissions of Electrical Inspector, as per specification no SS- TR
Providing transformer plinth 1.5 x 1.5 x 1.5 m in size with necessary excavation in ground at the bottom with 150 mm. thick M-10 PCC at the bottom and top and 250 mm. thick burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 60mm Hard broken aggregate, external surface duly plastered 15 mm thick including watering etc. complete.
Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in C C foundation and painted as per specification No SS-AS/FSG
Supplying and erecting 50 x 50 x 6 mm. angle iron as corner support 2m long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle, in C.C. foundation of 15 x 15 x 40cm complete duly painted with one coat of red oxide and two coats aluminum paint.
Supplying and erecting double leaf hinged door each 1500mm in width x 1850 mm in height using B class ,GI pipe with angle iron supports, chain link wiremesh (jali) complete supported on channel iron, erected in foundation, and painted as per specification no SS-AS/DLD
Providing and spreding stone metal 25 mm size for 100mm depth above the ground level
Providing earthing with Galvanised cast iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials,testing & recording the results as per specification No. EA-EP ( Metering Unit - 9 Nos, Transformer Body - 2 Nos, LBS - 2 Nos)
Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA ( Transformer Neutral - 2 Nos,2)
Supplying and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP).
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.
Providing round bottom fire bucket of 9 liters capacirty as per IS :2546 made out of 24SWG GI sheet with extra handle at bottom duly painted white inside and red outside with FIRE mark on provided stand wall hook
provoding floor mounting stand for keeping 4 nos of FIRE buckets 1500mm in length,900mm in height frame made out of 30x30x4mm angle iron with cross supports for legs,welded with 4 hooks & duly painted with red lead & 2 coats of silver paint
Supplying and fixing PVC Synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 & CPRI tested having 2.5 mm thickness upto 11 kV
Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. Capacity Cartridge type conf. To IS 2878 Complete erected with necessary clamp made front 50x6 mm. M. S. flat with nut & bolts grouted in wall complete
Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated.
Providing pair of duly tested rubber handgloves as per IS 340715 suitable for working on 22KV supply
Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal use, scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard makes)
Supplying, erecting and commissioning of diesel generating setwith alternator of 320 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standardaccessories, self excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722- 2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising of meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. and obtaining necessary approval from Electrical Inspector as per specification no. GENDG
Providing earthing with Galvanised cast iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials,testing & recording the results as per specification No. EA-EP ( DG set Body & Neutral - 2 Nos each)
Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA ( DG Neutral - 2 Nos,2)
Supplying and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP).
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.
Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above 250 kVA upto 320 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.
Providing & erecting 8 m high (clear height) galvanised OCTAGONAL pole with foundation bolts having bottom of 135 mm A/F, top 70 mm A/F on provided foundation as per specification No.OH-PL/OPL
Providing and erecting Galvanised 1000mm single arm sword type bracket with FRP dome and Ball as per specification No. OH-PL/PBKT
Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).
Supplying & erecting pipe type earthing with 40mm.dia.Gl.pipe or 20mm dia.Gl.Rod complete with all materials as per specification no. EA-EP
Supplying & erecting G.I.Earth wire of high purity of different sizes used for earthing or any other purposes on wall with G.I.necessary clamps as fixed on wall/cable/conduit with screws in an approved manner
Providingcement concrete for foundation or for concrete filling in 1:3:6 ratio with 20 to 25 mm. stone metal duly plastered with necessary curing for pole muffing or any other purposes.
Supplying and erecting triple pole and neutral distribution board (TPNDB) with doorsurface/flush mounted 12 ways for outgoing SP MCB’s on iron/ G.I. frame/wooden board as per specification No. SWSWR/MCBDB
Supplying, erecting & marking FPMCB 6A to 32A in provided distribution board as per specification No. SW-SWR/MCB
Supplying & erecting & marking SPMCB 6A to 32A B series ( for light) in provided distribution board . As per specification no. SW-SWR/MCB
Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying and erecting LED street light fitting suitable for above75W - 90W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No. FGODF/FLS2
Supplying and erecting LED street light fitting suitable for above26W - 32W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No. FGODF/FLS2
Supplying and erecting street light Wall bracket made from 40 mm.dia ‘B’class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB
Supplying & laying(including excavation) 25 cms. dia RCC hume pipe with coupling collar of standard thickness at required depth upto 90cms. below road/ground surface, for enclosing provided cable and necesary back filling with light ramming to make the road/ground surface as it was.(Except bitumen carpet).
Making the trench in hard murum/Tar road of suitable width and depth as per IS for laying provided LT cable of 25 sqmm & above and covered with half round hume pipe complete as per specification no. CW-EXN-CTR
Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP
Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in anapproved manner with joints required. as per specification No(EA-EP). )
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP ( For Panel, DBs, Building Earthing etc.)
Supplying & erecting G.I.Earth wire of high purity of different sizes used for earthing or any other purposes on wall with G.I.necessary clamps as fixed on wall/cable/conduit with screws in an approved manner ( From DBs to Earth bus and other small electrical appliances etc)
Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner
Supplying & erecting Centrifugal Water Pump (Monoblock), 415 V, Three Phase 50 Cycles A.C. Supply of 3.75 KW/ 5 HP with discharge 2/4.1 Liters per second (LPS) for head of 36/52 m and 50 mm suction/ 40 mm delivery pipe on provided C.C. foundation as per specification No. WP-CG
Supplying & erecting mains with 4x10 Sq.mm.and Earth Wire 6 Sq.mm FR PVC Copper Wire, in HMS rigid PVC conduit 32mm dia, as per specification No: WG-MA/PC, para no. 1.4.1
Supplying and erecting D.O.L. Starter 400V. 3 Phase, 50 Cycles with no volt coil and overload element with necessary materials and connected to supply Upto 7.5 H.P. (Similar to L & T make MK-1 DOL Model)
Supplying and erecting high dencity polythelene Pipe ISI mark 32 mm dia suitable for pressure 6 kg/cm2 connected to Jet/Submersible pump with required material complete.
Supplying & erecting Plywood 12 mm thick fixed to wall or on provided panal board with necessary materials such as Screws, wall fasreners supports,nuts bolts etc.complete.
Providing and fixing sheet metalwork in CRCA sheet with fabrication of boxes panalboard etc. including cutting bending , drilling, welding, riveting ,etc treated with anti rust treatment and duly power coated or painted with one coat of redoxide and two coats of enamal paint as directed.
Supplying and erecting submersible pumpset of 3 KW/4 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 100 to 350 LPM discharge at 56 to 30 m head & (max. efficiency at 47 m head & 250 lpm) discharge & delivery pipe of Size-50 mm diameter with a necessary H type clamps as per specification no. WP-SMP
Supplying & erecting Flat flexible 3 core 2.5 Sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.
Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE
Supplying & erecting Galvanised cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials ,testing and recording the results as per specification No.EA-EP
Supplying & erecting Atomatic Control Panal For 1 ph, 230 Volt A.C Submersible / Centrifugal Pumpset Upto 2 HP consisting of DOL starter of suitable relay range S.P.P combined ammeter/volt meter phase including lamp enclosed in CRCA powder coated vibration proof encloser with IP 54 protection,control panal should offer single phasing ,phase reversal,phase inbalance etc.( Similar to LT Model no MR G2 )
Providing & erecting floor / wall mounting compartmentalised panel board with IP 43 protection made out of 14/16 SWG CRCA sheet , with top cable entry, duely powder coated in Siemens Grey colour including 0.5 class load manager and CTs. The cost should include complete internal wiring with suitable size of wires/cables, Aluminium Busbars with current density 0.8A per sqmm for incoming and outgoing with equal phase and neutral, Busbar accessories, RYB indicating lamps and all other necessary accessories and hardware required to complete the panel ( Excluding Switchgear) ( Main LT Panel)
Providing & erecting floor / wall mounting MCCB panel board with IP 54 protection made out of 14/16 SWG CRCA sheet , with bottom cable entry, duely powder coated in Siemens Grey colour . The cost should include Aluminium Busbars with current density 0.8A per sqmm for incoming and outgoing with equal phase and neutral, Busbar accessories, RYB indicating lamps and all other necessary accessories and hardware required to complete the panel ( Excluding Switchgear) ( Breaker Panel)
Providing & erecting 4 Pole MCCB of 600/630 A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB(PANELI/C-1,BREAKER PANEL-1)
Providing & erecting 3 Pole MCCB of 315/400 A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB (CAPACITOR )
Providing & erecting 4 Pole MCCB of 315/400A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB (STABILIZER I/C,O/G-02,SPARE-01)
Providing & erecting 4 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron frame/wooden board as per specification No. SW-SWR/MCCB (FIRE,SPARE-100A-2 NOS,PRE COOLING(2 NOS),COLD ROOM(4 NOS),GRADING PANEL-80A-7 NOS,SPARE,ANTE ROOM(2 NOS)-32A-3 NOS,DOCK AREA,EVAPORATIVE COOLING(2 NOS)-20A -3 NOS
Providing & erecting 4 Pole MCCB of 160A / 200A,415V capacity with S.C. rating 25 kA (Ics=100% of Icu) thermal and magnetic setting with provided leads on iron frame/wooden board as per specification no. SW-SWR/MCCB
Providing & erecting 4 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron frame/wooden board as per specification No. SW-SWR/MCCB
Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB (with S/C indication) STREET LIGHT DB,LTG DB-1,2-40A-03NOS,POWER DB,UTILITY DB,SPARE(2 NOS)-63A-04 NO
Supplying and erecting 125 kVAr, 3 phase, 50 Hz., capacitor duty contactor with de-latching mechanism microprocessor APFC controller with MPP / APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC
Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 24 ways on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB(LDB1,2)
Supplying, fixing and commissioning 4 pole RCBO ( (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 32/40A as per specification no SW-RCCB/RCBO
Supplying, erecting & marking TPMCB 6A to 32A, in provided distribution board as per specification No. SW-SWR/MCB
Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 12 ways on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB(POWER,UTILITY)
Supplying, fixing and commissioning 4 pole RCBO ( (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 63A as per specification no SW-RCCB/RCBO
Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
Supplying, erecting & marking TPMCB 6A to 32A, in provided distribution board as per specification No. SW-SWR/MCB(C SERIES)
Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 12ways on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB (POWER DB IN PACK AREA(2),DIS/REC.DOCK(2)
Supplying, fixing and commissioning 4 pole RCBO ( (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 32A/40A as per specification no SW-RCCB/RCBO
Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
Supplying, erecting & marking TPMCB 6A to 32A, in provided distribution board as per specification No. SW-SWR/MCB(C SERIES)
Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP MCBs of 12ways on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB (VARIOUS LIGHTING DBS)
Supplying, fixing and commissioning 4 pole RCBO ( (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 6A/10A/16A/20A/25A as per specification no SW-RCCB/RCBO
Supplying, erecting & marking SPMCB 6A to 32A, B-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
Supplying, erecting & marking SPMCB 0.5A to 5A, B-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
Supplying, erecting & terminating XLPE armoured cable 3½ core 400 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating XLPE armoured cable4 core 70 sq. mm. aluminium conductor with continuous 8.35sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
supplying and erecting ultrasonic rat repellent machine complete with necessary acc essories complete erected at site (for 7300 sqft area)
Supplying & laying HMS PVC conduit 25 mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No.WG-MA/CC
Point wiring for light/fan/bell points consealed type in min 20mm PVC conduit with 1.5 sqmm FRLS grade copper wires with modular type switch and required accesssories as per specification no. WG-PW/SW
Supplying and erecting 32A 3 PIN+SOCKET DB as per L & T PMP332DB
Supplying and erecting 20A 2 PIN+SOCKET DB as per L & T PMP220DB
Point wiring for two way light points consealed type in min 20mm PVC conduit with 1.5 sqmm FRLS grade copper wires with modular type switch and required accesssories as per specification no. WG-PW/SW
Wiring for plug on board with Switch socket concealed type and copper wiring, earthing and with modular accessories as per specification No: WG-PW/CW
Point wiring for independent plug, concealed type in min 20mm PVC conduit with 1.5 sq.mm FRLSgrade copper wires with moduler type switch and socket and required accessaries as per specification No WG-PW/SW
Supplying & Erecting modular type 3 pin 6/16A multi socket with safety shutters combined unit ISI marked approved make duly erected on provided plate & box with wiring connections complete ( for office
Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner.
Supplying and fixing tool-less Information Outlet (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. ( For 20A S/S Outlet)
Supplying & erecting mains with 2x2.5 sq.mm.and earth wire 1.5 sq.mm FRLS PVC copper wire, in rigid PVC conduit min.20mm dia, as per specification No: WG-MA/PC, para no. 1.4.1 (Lighting Mains Consealed Type)
Supplying & erecting mains with 2x4 sq.mm.and earth wire 2.5 sq.mm FRLS PVC copper wire in rigid PVC conduit min.20mm dia,as per specification No: WG-MA/PC, para no. 1.4.1 (for AC)
Supplying and erecting mains with ISI mark WP 4 x 4 sq. mm. 1100 V. Grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire.
Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22/E-27 base.
Supplying and erecting 70W WELL GLASS LED r having pressure die-cast aluminium housing, opal translucent cover, IP 66 fitting
Supplying and erecting 35W WELL GLASS LED r having pressure die-cast aluminium housing, opal translucent cover, IP 66 fitting
Supplying and erecting LED square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.
Supplying & erecting LED 40W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete(44 NOS-Similar to WIPRO CASULE,2 NOS-Similar to WIPRO OPTIMA).
Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) 600x600mm suitable for 36 W-40W with provision for plane front frame with translucent cover fixed to the housing complete
Supplying and erecting ding dong/ electronic musical type call bell with heavy duty coil suitable to operate on 230V AC supply erected on polished double wooden block /sunmica block of suitable size
Supplying installing,testing and commissioning variable speed inverter technology split type room Airconditioning unit 1.5 TR having ISEER minimum 4.5 suitable to operate on 250V, 50 cycles, A.C. supply having 1 No of air handling unit hiwall / floor mounting type complete with Refrigerent R410 A/R32 and COPPER CONDENSOR at position as per specification no. AP-AC/SAC
Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.
Supplying, and fixing Cat-6 LSZH CABLE suitable for LAN/WAN as per specifications complete
Supplying, installing, testing & commissioning approved type Push button telephone instrument desk top/wall mount with caller ID unit as per specification in approved manner
Supplying & erecting telephone cable 3 pair with 0.5 mm dia. laid in provided PVC casing / conduit as per specification No. WG-TW
Supplying and erecting 16 chanel NVR((Similar to Sparsh)
Supplying, and fixing Cat-6 LSZH CABLE suitable for LAN/WAN as per specifications complete
Supplying and erecting oil cooled stabilizer 200 KVA capacity complete with standard features along MCCB and CONACTORas per FUJI ELECTRICCOUNSOULL NEOWATT
Supplying, Installing,Testing and commissioning of 10 KWp capacity On-Grid Solar Power Packwith GI mounting structure and inter connecting wires / cables without battery bank SPV Modules of 10 KWp, Solar power Conditioning unit of min. 10 KVA capacity complete. With 5 years on site performance warranty as per Specification no ESD-RT-ONG
Supplying and erecting three phase smart energy meter DLMS compliance with 3x240V 50 cycles AC supply 10-60 A, ISI mark, accuracy class 1.0 with backlit LCD display, measuring & display V, I, kW, kWh, PF, kVA, kVAr, MD, day, week, month & with communication module configurable for GSM/Wi-Fi, IrDA/Bluetooth, complete provided panel with calibration certificate from manufacturer & duly wired with required size of PVC wires.
Supplying, erecting & terminating XLPE armouredcable 4 core 10 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. covercomplete with all materials, testing & recording the results as per specification No. EA-EP
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.
Supplying, erecting & terminating PVC Unarmoured cable 1 core 10 sq. mm copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no. CB-LT/CU
Supplying, installing, testing and commissioning with perfect aligning, proper levelling of fire service main multi stage pump, of 2400 LPM at 88 m head centrifugal type, 75 HP (55 kW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no.FF-MFP/MSC
Supplying, installing, testing and commissioning with perfect aligning, proper levelling of booster pump of 900 LPM at 40 m Head, 12.5 HP (10 KW), 3 phase, 415 volt, 50Hzor of suitable HP with suitable stages as per specification no. FF-MFP/BP
Supplying installing, testing, commissioning with perfect aligning, proper levelling of Jockey Pump of 240 LPM at 56 m head, 3 ph. 415 A.C.15 HP, (11 kW) or of suitable HP with suitable Stages as per specification No. FF-MFP/JP
Supplying, installing, testing, commissioning of control panel for the Main Fire Pump, Sprinkler Pump with Star Delta connections from RYB, voltameter, ammeter, necessary ELCBS, MCBS etc with 14 SWG sheet control panel including armoured cable from pump to the control panel, glands, connectors, water proof joints in cable if the joint required etc complete.
Supplying and installing G.I. pipe above ground of ‘C’ class ERW conforming to IS: 1239, alongwith necessary fittings and M.S. angle iron supports, with one coat of red oxide primer and two coats of Post office fire red enamel paint, duly tested to 1.5 times of working pressure, in an approved manner.
Supplying and erecting G.I.pipe above ground of ‘C’ class ERW of size 75/80 mm dia. with necessary fittings complete as per specification No. FF-PP
Supplying and erecting G.I.pipe above ground of ‘C’ class ERW of size 100 mm dia. with necessary fittings complete as per specification no. FF-PP
Supplying and erecting G.I.pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no.FF-PP
Supplying and erecting G.I.pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings complete as perspecification no.FF-PP
Supplying and installing G.I.pipe underground of ‘C’ class ERW conforming to IS: 1239, alongwith necessary fittings and excavation upto 1000mm in all type of soil and backfilling the excavated stuff in 3 layers, compacting the soil and disposing the surplus soil within a lead of 100m including wrapping of 2mm thick PYPKOTE insulation with adhesive coat duly tested to 1.5 times of working pressure, in an approved manner.
Supplying and erecting G.I.pipe above ground of ‘C’ class ERW of size 75/80 mm dia. with necessary fittings complete as per specification No. FF-PP
Supplying and erecting G.I.pipe above ground of ‘C’ class ERW of size 100 mm dia. with necessary fittings complete as per specification no. FF-PP
Supplying and erecting G.I.pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no.FF-PP
Excavating Hard Murum/metal road (B.T.)by chiseling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.
Supplying and installing cast iron foot valve with strainer conforming to IS: 4038 with Gun metal seat (flapper), nut bolts, gasket, washers etc. only for negative suction.
Supplying and installing cast iron foot valve ball type / flap type of size 80 mm dia with strainer for negative suction as per specification No.FF-VL/FV
Supplying and installing cast iron foot valve ball type / flap type of size 100 mm dia with strainer for negative suction as per specification No.FF-VL/FV
Supplying and installing cast iron foot valve ball type / flap type of size150 mm dia with strainer for negative suction as per specification No.FF-VL/FV
Supplying and installing cast iron Butterfly valve with EPDM rubber gasket conforming to IS:5312 (Part-I) PN1.6 with nut bolts, gaskets etc. and tested to1.5 times of working pressure, in an approved manner.
Supplying & Installing cast iron double flange butterfly valve of size 75/80 mm dia. as per specification No. FF-VL/BFV
Supplying & Installing cast iron double flange butterfly valve of size 100 mm dia. as per specification No. FF-VL/BFV
Supplying & Installing cast iron double flange butterfly valve of size 150 mm dia. as per specification No. FF-VL/BFV
Supplying & erecting gun metal gate valve of size 50 mm dia complete as per specification No. FF-VL/GV
Supplying and erecting 65 mm dia. gun metal sluice valve at position with necessary materials complete.
Supplying and installing 'Y' strainer fabricated out of brass perforated sheet of 14 SWG (2.0 mm thick) duly with brazing to flange or pipe with nut bolts, gaskets, washers, etc. in position for only suction in an approved manner.
Supplying and installing 75 / 80 mm dia end line straine + ve suction complete as per specification No. FF-VL/ELS
Supplying and installing 100 mm dia end line straine + ve suction complete as per specification No. FF-VL/ELS
Supplying and installing 150 mm dia end line straine + ve suction complete as per specification No. FF-VL/ELS
Supplying and installing double flange NRV conforming to IS:5312 (Part-I), ISI marks, PN1.6 having cast iron body and gun metal working parts with nut bolts, gaskets, etc. and tested to 1.5 times of working pressure in an approved manner.
Supplying and erecting cast iron double flange NRV of size 75 / 80 mm dia complete as per specification No. FF-VL/NRV
Supplying and erecting cast iron double flange NRV of size 100 mm dia complete as per specification No. FF-VL/NRV
Supplying and erecting cast iron double flange NRV of size 150 mm dia complete as per specification No. FF-VL/NRV
Supplying & installing One piece moulded HDP / Fibre water tank.for -ve suction only, having capacity 1000 ltrs.fitted with necessary accessories complete as per specification No.FF-FFA/PT
Supplying and installing gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification No. FF-VL/HV
Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m high pressure polypropylene (Polyhose) long fitted with necessary accessories complete as per specification No. FF-FFA/HV
Supplying & erecting gun metal gate valve of size 20 mm dia complete as per specification No. FF-VL/GV
Supplying & erecting gun metal gate valve of size 25 mm dia as per specification No. FF-VL/GV
Supplying & erecting gun metal gate valve of size 50 mm dia as per specification No. FF-VL/GV
Supplying fire fighting C.P. (controlled percolation) Hose pipe, 63mm dia, 15min length, fitted with necessary accessories complete as per specification no. FF-FFA/CPH
Supplying Stainless Steel branch Pipe 63 mm Ø fitted with 20 mm dia detachable hexagonal nozzle as per specifications No. FF-FFA/NZ
Supplying and installing Air Vessel of 300 mm Ø 1.5m in height M.S. tank installed inside pump house as per specification No. FF-FFA/ACT
Supplying and erecting 20 / 25mm Ø G.M.air release cock, with necessary G.I. coupling to be fitted on top of Air vessel or on wet riser as per specification No.FF-FFA/ARV
Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm Ø. Pad cock valve, and G.I. pipe, elbow etc. as per requirement in an approved manner as per specification No. FF-FFA/PG
Supplying and installing pressure switch with 12/15 mm Ø isolation valve, G.I. nipple, elbow etc. in an approved manner as per specification No. FF-FFA/PS
Supplying and erecting one no. Brass orifice plate having 6 mm. thickness, 140 mm outer dia and required/proper diameter of inner hole at every single outlet hydrant valve as per specification No. FF-FFA/OP
Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.
Supplying and installing fire brigade Header of 150 mm Ø, for supplying water in fire tank as per specification No. FFFA/FBC
Supplying and installing fire brigade Header (Siamese Connection) of 150 mm Ø for supplying water to wet riser system as per specification No. FF-FFA/SMC
Supplying and installing cast iron double flange sluice valve 150 mm dia. as per specification No. FF-VL/SV
Supplying & laying (including excavation) 25 cm dia RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet)
Supplying and installing G.I.pipe of ‘C’ class ERW conforming to IS: 1239, alongwith necessary fittings and M.S. angle iron supports or GI threaded U clamps, pipe supports with one coat of red oxide primer and two coats of Post office fire red enamel paint, duly tested to 1.5 times of working pressure, in an approved manner.
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings as per specification no.FF-PP
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings as per specification no.FF-PP
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75 / 80 mm dia with necessary fittings as per specification no.FF-PP
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings as per specification no.FF-PP
Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings as per specification no.FF-PP
Supplying and erecting, testing and commissioning of 15 mm (½") dia. NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction as per specification No. FF-SPR
Supplying & erecting, testing and commissioning vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branch lines of 100 mm dia having following features 1) Visual Switch Activation 2) Rugged Switch Assembly 3) Heavy Duty Alluminium pipe Saddles 4) Durable Metal Encloser 5) Steel U Bolts For Secure Mounting 6) Two SPDT ( Single Pole Double Track ) Synchronised Switches 7) Serviceable Without Draining Pipes
Supplying and installing, testing and commissioning heat detector (Non Addressable) complete on box as per specification no. FF-FAS/HD
Supplying, installing, and testing and commissioning optical type smoke detector (NonAddressable) complete on box as per specification No. FF-FAS / SD
Supplying, installing, testing and commissioning Manual Call Point (Pill box) (NonAddressable) with break glass push button in metal enclosure complete as per specification No. FF-FAAS / MCP
Supplying, installing, testing and commissioning hooters (NonAddressable) with CRCA enclosure complete as per specification No. FF-FAAS / HTR
Supplying, installing, testing and commissioning remote response indicators (NonAddressable) as per specification No. FF-FAAS / RRI
Supplying installing, testing and commissioning XLPE armoured cable 4 core 1.5 Sq.mm. copper conductor complete erected on wall/ ceiling as per specification No. CB-LT / CU
Supplying, installing, testing and commissioning of 2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification no. FF-FAAS/FACP
Providing Round bottom FIRE Bucket of 9 Litrescapacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete.
Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.
Supplying and erecting D.C.P. type Fire Extinguisher 9 kg capacity cartridge type with Gun Metal cap 150 gram CO2 gascartridge, powder and brackets conforming to IS 2171-1985and complete erected with necessary clamps made from 50x6mm M.S. flat with nuts & bolts grouted in wall complete.
Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. Capacity Cartridge type conf. To IS 2878 /15683Complete erected with necessary clamp made from 50x6 mm. M. S. flat with nut & bolts grouted in wall complete
Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall
Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated
Supplying and erecting Fire resistant Mortar(20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings with all kinds of cables, pipes and cable support system in steel and aluminium and plastic profiles ( Except hollow core conductors). The residual openings shall be closed with filler, as per specification No. FF-FRM
INSULATED PANEL Supply and Erection as per General Technical Specifications , for walls-80 mm thick PIR panels,Density: 40 ±2kg /m3 0.5 mm thick Precoated G.S. Sheet (min. 180 GSM) on both sides with polyester coating (thickness: 20~25 micron)
INSULATED PANEL Supply and Erection as per General Technical Specifications , for walls-100 mm thick PIR panels,Density: 40 ±2kg /m3 0.5 mm thick Precoated G.S. Sheet (min. 180 GSM) on both sides with polyester coating (thickness: 20~25 micron)
INSULATED PANEL Supply and Erection as per General Technical Specifications, for ceiling-60 mm thick PIR panels, Density: 40 ±2kg /m3 0.5 mm thick Precoated G.S. Sheet (min. 180 GSM) on both sides with polyester coating (thickness: 20~25 micron) Ceiling support system including supports for hanging/fixing ceiling structure from the roof/slab level to be included. This structure shall be ensured to be with complete thermal break and should avoid metal connection between inside and outside.
INSULATED PANEL Supply and Erection as per General Technical Specifications, for ceiling-100 mm thick PIR panels, Density: 40 ±2kg /m3 , 0.5 mm thick Precoated G.S. Sheet (min. 180 GSM) on both sides with polyester coating (thickness: 20~25 micron) Ceiling support system including supports for hanging/fixing ceiling structure from the roof/slab level to be included. This structure shall be ensured to be with complete thermal break and should avoid metal connection between inside and outside. Additional PIR filled hat section of minimum 50 mm thicnkess beyond any metal member of the support should be considered if only metal 'T' is being considered for ceiling panel support.
INSULATED FLOOR Supply and Erection as per General Technical Specifications Floor 100 mm XPS , min 30 kg/cu.m density. Rate for floor insulation to include supply and erection of all ancilliaries including polythene vapour barrier & two ply tarfelt as per specifications and bituminous primer, bitumin / bituminous cold compound for proper adhesion to surfaces.
Supply & Fixing of 6~9 mm thick EPDM / Nitrile rubber on RCC slab / brick walls with suitable CPRX compound adhesive over which the insulated panels shall be fixed tightly with Nylon / FRP / Steel reinforced Nylon bolts.The bolt heads on the panels shall be covered with hat runners filled with PUF insulation as per standard practice.
Supply & fixing of of Al foil min. 50 micron on RCC slab / brick walls with suitable CPRX compound adhesive / bitumen
Ancillary Materials and Services - Flashings for Internal and external wall-ceiling joints and wall-wall joints as applicable or as may be required for doors or other openings. The layout showing the chamber dimensions and height is enclosed for ready reference. The flashings should be atleast 50mm x 50 mm or larger sizes with adequate overlap over any given panel-panel joint (Precoated G.S. Sheet, minimum 0.5 mm thick)
Ancillary Materials and Services - Silicon / Polyeurathene sealant for sealing the gaps between panels and the external / internal face of the insulation panels and any other location as may be deemed suitable for proper insulation panel erection system as applicable.
Ancillary Materials and Services - PUF/PIR chemical, adhesives,/ tapes / plastic caps etc reqd for onsite application, as may be necessary for a complete and foolproof insulation job.
Ancillary Materials and Services -SITC of Pressure relief ports suitable for mounting on insulated panels of various thicknesses (60 mm to 100 mm) with internal heaters for room temperatures ranging from 25 deg C to (-) 10 deg C. (Fermond Soupape 2220 -Valve /Equivalent)- 1 no for each cold storage chamber.
Ancillary Materials and Services - Making & finishing of cut outs for doors, pipes, cables, pressure ports etc as per requirement at site. Finishing would include filling with PUF/PIR & PUF/PIR foam of required density and covering with pre - coated G.I.sheet from both side of the panels to give aesthetically neat joint acceptable to Consultants / Owners. This should also include any additional Silicon sealent or any other material as required.
Precooling Chamber 1 Staging cold room 1,2,3,4 Manual Sliding type 1500 mm x 2600 mm ht x 100 mm thick PIR , manual type Providing & fixing of Insulated sliding doors (suitable for fitting on panel structure) of clear opening size & insulation thicknesses as mentioned and specifications as per General technical specifications (GTS). The doors shall be manual single leaf sliding with 0.6 mm thick SS-304 sheet or pre-coated extruded Aluminium of required thickness main frame. The door leaf shall have 0.5 mm thick PCGI sheet with min 180 GSM galvanising / S.S sheet cladding on both sides with PIR foam filled In-situ and with a density 40 ± 2 Kg/m3 (insulation thicknesses as mentioned).0.60mm thick PCGI sheet flashing to protect and reinforce the cut out opening in panel wall to be included in the cost. The sliding mechanism should be sturdy and smooth in operation complete with rail, runners, sill on the bottom etc. Rail shall be made of heavy duty aluminium alloy / SS with 45º drop & with polyethylene roller / special grade nylon arrangement runner system. The rail shall be provided with canopy / cover of 1.2 mm thick PCGI / Extruded Aluminium of required thickness. The doors shall have easily replaceable EPDM gaskets to ensure perfect hermetic sealing .
For processing area to Ante-Room, Ante-room to dispatch dock, Insulated Doors -Swing type with double shutter 2000 mm x 2600 mm ht x min 44 mm thick PIR /PUF Providing & fixing of Insulated doors (suitable for fitting on panel /Civil wall structure) mounting of clear opening size & insulation thicknesses as mentioned and specifications as per General technical specifications (GTS). The doors shall be manually operated double leaf swing type with 1.25 mm thick SS-304 sheet or pre-coated extruded Aluminium of required thickness main frame.Any other material for door frame may be considered on case to case basis. The door leaf shall have 0.6 mm thick PCGI sheet with min 180 GSM galvanising / S.S sheet cladding on both sides with PIR/PUF foam filled In-situ and with a density 42 ± 2 Kg/m3 (insulation thicknesses as mentioned).Viewing window on each door leaf shall be provided. The rate shall include all minor accessories not specifically mentioned in the technical specification, but essential for the completeness of the work.
For processing area entry, holding area, Material store, waste disposal, holding, receiving area Insulated Doors -Swing type with double shutter 2000 mm x 2100 mm ht x min 44 mm thick PIR /PUF Providing & fixing of Insulated doors (suitable for fitting on panel / civil structure) mounting of clear opening size & insulation thicknesses as mentioned and specifications as per General technical specifications (GTS). The doors shall be manually operated double leaf swing type with 1.25 mm thick SS-304 sheet or pre-coated extruded Aluminium of required thickness main frame.Any other material for door frame may be considered on case to case basis. The door leaf shall have 0.6 mm thick PCGI sheet with min 180 GSM galvanising / S.S sheet cladding on both sides with PIR/PUF foam filled In-situ and with a density 40 ± 2 Kg/m3 (insulation thicknesses as mentioned).Viewing window on each door leaf shall be provided. The rate shall include all minor accessories not specifically mentioned in the technical specification, but essential for the completeness of the work.
For Lab, PQ area Insulated Doors - Swing type with single leaf 1200 mm x 2100 mm ht x min 44 mm thick PIR /PUF Providing & fixing of Insulated doors (suitable for fitting on panel /civil structure) mounting of clear opening size & insulation thicknesses as mentioned and specifications as per General technical specifications (GTS). The doors shall be manually operated single leaf swing type with 1.25 mm thick SS-304 sheet or pre-coated extruded Aluminium of required thickness main frame.Any other material for door frame may be considered on case to case basis. The door leaf shall have 0.6 mm thick PCGI sheet with min 180 GSM galvanising / S.S sheet cladding on both sides with PIR/PUF foam filled In-situ and with a density 40 ± 2 Kg/m3 (insulation thicknesses as mentioned).Viewing window shall be provided. The rate shall include all minor accessories not specifically mentioned in the technical specification, but essential for the completeness of the work.
DOCK DOOR & SHELTER Dock door shall be vertically moving with motorized movement. The shutter shall have PUF core with aluminum external / internal facing with white paint (RAL9003E/Eqvt). The vertical moving track shall be U shaped made of 2.5 mm G.S. Sheets. Full perimeters doors seal with PUF verticals, Vinyl lintel seal & rubber seal of bottom shall be provided. acceptable makes: Gandhi Automation/ Metaflex/Infraca (a) Dock door motorised type (b) Dock door motorized complete with control control button, manual lock release & cabling. DOCK DOOR: Type:motorised type Door opening Size : 2400 width x 2700 mm height Insulation : 40 mm PUF Door Movement : upwards, then curving into the ceiling Facing : External : Aluminium painted white Internal : Paint for higher impactability Operator : Normal Viewing Window: 1 no DOCK SHELTER : Retractable type suitable for heavy duty operations for door opening size as above. Dock seal to have adjustable top vertical member so as to adjust for container height variations
DOCK LEVELER Designed for Hydraulic operation as per General technical specification ,Acceptable makes: Gandhi Automation/ Metaflex/Infraca Size : 2000mm width and 2500mm deep, lift height min 300 mm from centre level, upwards & downwards., main cylinders-2 nos, All controls, control panels, controllers, power and control cabling etc as required for full operation to be included
Dock House Structure with suitable provision to install Dock Leveler, Dock Shelter & Motorised Overhead Door Approx. Door House Size: Width 3400mm x Length 2600mm x Height 5450mm Self-contained loading bay to be installed in front of the ante-room/loading unloading passage The design and layout of the dock house shall be adapted to suit the requirements of the site. Steel dock comprising of supporting legs.,Collapsible structure for considerable long distance volume saving in the transport. Easy and fast to reposition in case of future.MS Chequered Plate for Platform ,MS pipes for support structure, Both sides, top front & roof covered with precoated 0.5mm thick Corrugated sheet, PPGI colour coated gutter with fitting for drainage system, Finishing of MS pipes with one coat of grey epoxy primer by spray. All requirments for ensuring that the dock house structure does not have leakages during rains shall be ensured including providing of flashings on the building envolope (civil/PEB/other) & polyurathene based or similar waterproofing sealant for complete sealing. The same shall also be included in the costing of the item.
Strip Curtains: SITC of strip curtains made of 3 mm thick transparent PVC sheet strips with 40 / 50 mm overlapping and supporting clamps. The strips shall have free swinging motion. The strip material shall be suitable for the specified low temperature application to ensure that it remains soft even at the lowest operating temperature
Precooling Chamber 1 Staging cold room 1,2,3,4 Suitable for Clear opening Size: 1500mm X 2600mm ht
For processing area to Ante-Room, Ante-room to dispatch dock, Suitable for Clear opening Size: 2000mm X 2600mm ht
For processing area entry, holding area, Material store, crate,store, waste disposal, holding, receiving area Suitable for Clear opening size: 2000 mm x 2100 mm ht
For Lab, PQ area Suitable for Clear opening Size: 1200mm X 2100mm ht
AIR COOLED CONDENSING UNITS For Pre-Cooling chamber 1 (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Complete with Reputed approved make semi hermatic reciprocating compressor working on R449A / R448 A or other approved HFO, Air cooled condenser, Liquid receiver,Oil separator with check valve in discharge line, Base frame for mounting, H.P. / L.P.switches, Suction accumulator Vibration eliminator, Oil pr switch and pressure gauges , Sturdy MS Stand with two coats of primer and two coats of oil paint of approved colour etc. as required. Condenser coil to be designed for 10 deg C TD between ambient temperature and condensing temperature. Other Technical specifications as per General Technical specifications as mentioned in the tender. The capacity and other details shall be as follows : For Pre-Cooling chamber 1 ( 2 nos for each ACU): Capacity: 26 KW DesignTemperature: (-)4 deg. C evap. and +48 deg.C cond. Temp Maximum ambient Temperature: 42 deg C ambient Minimum fin spacing: 2 mm Condensing unit inlet air pre-cooling system: to be included There shall be provision to run each condensing unit separately especially in cases where product qty is low. Related controls (PLC if needed), cabling, control panel, etc shall be included in the cost. This shoud be possible in Automode as well as manual mode.
AIR COOLED CONDENSING UNITS For staging cold room 1,2,3,4 (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Complete with Reputed approved make semi hermatic reciprocating compressor working on R449A / R448 A or other approved HFO, Air cooled condenser, Liquid receiver,Oil separator with check valve in discharge line, Base frame for mounting, H.P. / L.P.switches, Suction accumulator Vibration eliminator, Oil pr switch and pressure gauges Condenser coil to be designed for 10 deg C TD between ambient temperature and condensing temperature. Other Technical specifications as per General Technical specifications as mentioned in the tender. The capacity and other details shall be as follows : For staging cold room 1,2.3.4 Capacity: 13 KW DesignTemperature: (-)4 deg. C evap. and +48 deg.C cond. Temp Maximum ambient Temperature: 42 deg C ambient Minimum fin spacing: 2 mm Condensing unit inlet air pre-cooling system: to be included
AIR COOLED CONDENSING UNITS For Ante room (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Complete with Reputed approved make semi hermatic reciprocating compressor working on R449A / R448 A or other approved HFO, Air cooled condenser, Liquid receiver,Vibration eliminator, Base frame for mounting, H.P. / L.P. switches and pressure gauges etc. Sturdy MS Stand with two coats of primer and two coats of oil paint of approved colour etc. as required. Condenser coil to be designed for 10 deg C TD between ambient temperature and condensing temperature. Other Technical specifications as per General Technical specifications as mentioned in the tender. The capacity and other details shall be as follows : For Ante room in front of Pre-cooling Capacity: 17.5 KW DesignTemperature: 5 deg. C evap. and +48 deg.C cond. Temp Maximum ambient Temperature: 42 deg C ambient Minimum fin spacing: 2 mm Condensing unit inlet air pre-cooling system: to be included
AIR COOLING UNITS - Air Cooling Units for Pre-cooling chamber 1,2 (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Technical specifications as per General Technical Specifications as mentioned in the tender. The capacity and other details shall be as follows : Make: Star coolers / GEA / Alfa Laval / Guentner / LU-VE / Thermofin / Eqvt, Model: To be Mentioned Type of Unit -Single / Twin: Twin coil type,Type of Refrigerant feed: HFO - DX Capacity - kW: 51, Evap. Temp. & TD ‘C’: (-)4 °C / 4 °C Coil / Fin MOC: Cu / Al, Fin spacing -mm: 6 mm Fin type: Plate, Finned coil length -m: To be Mentioned Total fan capacity of each unit– CMH: 52500, External sp. Wg, mm: 25 No of Fans/Unit: 3/4, Fan Motor -kW each: To be Mentioned Air throw -m: 8 m, Drain pan insulation: Required Drain pan heating: Not required Type of Defrosting: off cycle (provision to be kept for adding electrical defrost at later stage) Fan peripheral heating: Not required Suitable Supporting structure from primary support at roof level or mounting stand (if supporting from floor level) to be considered in the costing as well. Product Covering Flap - Suitable product covering flap made of PVC sheet / EQVT sturdy material to be mounted on the unit above the fan(s) to ensure proper air flow through the produce. There shall be suitable reinforcement inside the flap as well as at the ends for supporting the Flap. Costing for the same also shall be included. It must be noted that this scheme is considered as a part of a combined pre-cooling system which will have an airtight plenum created between the wall panel and the area around the ACU as defined above. So while the insulated panel will be billed as per the the insulation panel rates, the cutting for the panel, the flashings, etc as needed for the pre-cooling unit arrangement should be considered while quoting the cost of panels.
AIR COOLING UNITS - Air Cooling Units for Staging cold room 1,2,3,4 (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Technical specifications as per General Technical Specifications as mentioned in the tender. The capacity and other details shall be as follows : Make: Star coolers / GEA / Alfa Laval / Guentner / LU-VE / Thermofin / Type of Unit -Single / Twin: Single coil type Type of Refrigerant feed: HFO - DX Capacity - kW: 13 Evap. Temp. & TD ‘C’: (-)4 °C / 4 °C Coil / Fin MOC: Cu / Al Fin spacing -mm: 6 mm Fin type: Plate Finned coil length -m: To be Mentioned Total fan capacity of each unit– CMH: 15000 External sp. Wg, mm: 5 No of Fans/Unit: 2/3 Fan Motor -kW each: To be Mentioned Air throw -m: 8 m Drain pan insulation: Required Drain pan heating: Not required Type of Defrosting: Electrical Fan peripheral heating: Not required Suitable Supporting structure from primary support at roof level or mounting stand (if supporting from floor level) to be considered in the costing as well.
AIR COOLING UNITS - Air Cooling Units for Ante room (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Technical specifications as per General Technical Specifications as mentioned in the tender. The capacity and other details shall be as follows : Make: Star coolers / GEA / Alfa Laval / Guentner / LU-VE / Thermofin / Eqvt, Model: To be Mentioned Type of Unit -Single / Twin: Single coil type Type of Refrigerant feed: HFO - DX Capacity - kW: 17.5 Evap. Temp. & TD ‘C’: 5 °C / 10 °C Coil / Fin MOC: Cu / Al Fin spacing -mm: 4 mm Fin type: Plate Finned coil length -m: To be Mentioned Total fan capacity of each unit– CMH: 9050 External sp. Wg, mm: 8 No of Fans/Unit: 2/3 Fan Motor -kW each: To be Mentioned Air throw -m: 15 m Drain pan insulation: Required Drain pan heating: Not required Type of Defrosting: offcycle Fan peripheral heating: Not required Suitable Supporting structure from primary support at roof level to be considered in the costing as well.
Refrigeration Piping, Fittings & Valves (General details as per PART – II- REFRIGERATION SYSTEM of GTS) The piping shall be of refrigeration quality The piping shall be of refrigeration quality seamless copper tubes and the valves shall be brassomatic / Henry or equivalent make. The piping shall be included accessories such as filter, drier, sight glass, heat exchanger, suction lineaccumulator etc. as per P & I diagram approved by Consultant. Adequate number of supports shall be included. The piping shall be supported at distances of maximum 1.5 m from each other with suitably placed GS threaded rods of minimum 6 mm thickness when outside the chamber and piping shall be run on cable trays of size suitable to fit the pipes including insulation. Common cable trays can be considered depending on the suitability at site, however the same shall be acceptable to the consultant / owner. Overall, the piping execution shall ensure proper workmanship and a neat and tidy work is expected with straight horizontal and vertical lines and proper supporting. Under no circumstances shall any additional charges be demanded by the contractor for ensuring the same. The suction and discharge lines shall be designed for a maximum pressure drop corresponding to 1.1 deg. C drop in saturated evaporating and condensing temperatures. The liquid line shall be designed for maximum pressure drop corresponding to a drop 0.5 to 1 deg. C in saturation temperature. The piping shall be designed with proper slope in the direction of Refrigerant flow and to ensure proper oil return to the compressor and should be installed with adequate supports to avoid undue vibration. The piping should be thoroughly cleaned as per standard practice prior to installation. Refrigeration piping,fittings,valves,interconnecting condensing & evaporator unit complete with standard controls & accessories, supports as may be required shall be included in cost.layout drawing showing proposed location of condesing units is atttached for your reference.
Suction line insulation (General details as per PART – II- REFRIGERATION SYSTEM of GTS) Suction line insulation with EPDM/ XLPE/Equivalent insulation with minimum 28G Aluminium foil Clading in the covered areas and Weatherproof Clading in areas exposed to sunlight and is uncovered ; e.g. Woven glass cloth with epoxy coating or Armacheck GC/equivalent Clading with suitable fittings and Adhesives.Alternatively,Fevicol Weather protect coat applied as per manufacturers recommendation may be used for entire insulton protection. Thickness - 25mm Insulation supports shall be half round or full round heavy duty PVC pipe sections of relevant size which shall be atleast 150 mm in length and shall be placed below every support (if necessary). This is essentially ensuring that the insulation compression at the support is at the minimum.
Drain piping with rigid U-PVC pipe from A.C. units to to suitable drain point complete with 'U' Traps for each cold room and supports.Drain lines (inside the chambers) to have 10 mm EPDM / Eqvt. insulation with factory backed Aluminium foil.Individiual Drain outlet line from ACU pipe size shall be same as the drain outlet of ACU and further the header shall be at least one size higher than the drain outlet connection size. Further, higher sizes may be considered as per the consultants/owner's recommendation
Controls and Instruments (a) Thermostatic expansion valves for each ACUs (b) Digital temperature indicator cum controllers (0 to 50 deg. C range) (c) Liquid line solenoid valves, DANFOSS / SPORLAN /EQVT make (d) Digital temperature indicator (minus 20 to 50 deg. C range), for A.C. units to be placed outside the each cold rooms in ante-room area. (e) Digital RH indicator (0 to 100 % range) for A.C. units to be placed outside the each cold rooms in ante-room area. Only for pre-cooling ,staging cold room ACUs
First charge refrigeration gas and oil etc. as required upto commissioning and final handling over of plant.
Painting of equipment/piping / piping supports etc. as per standard colour codes with initial coat of red oxide primer and two coats of synthetic enamel paint .
Humidification system for pre-cooling chambers complete with Industrial type Ultrasonic Humidifier, U-PVC water piping from the tanks to humidifier unit, fitting ,valves, atomizer nozzles, solenoid valves with strainers and humidistats etc. to maintain the relative humidity in the design range for Pre-Cooling Chambers. Also consider heavy duty PVC piping for air delivery into the cooling area for a release of humidified air into the main air stream, at atleast 1 m distance from the partition panel inside the cooling chamber area. Humidifier Capacity: 12 Lit/hr.
Miscellaneous Items a) Vibration isolators for condensing units, supporting rods / Frame for A.C. Units with insulation, steel structure for mouting condensing units etc. as may be required b) Minor structural openings in walls / panels etc for piping, cabling etc. and finishing. c) 2000 lit water tank along with water pump as necessary for lifting water to the tank or lifting water from the tank depending on tank location ,UPVC piping, fittings,valves etc as may be required for condenser inlet air-precooling system. Condenser air pre-cooling system shall have automatic operation with water line sonenoid valves for each individual condensing unit and there shall be an interlock with the conensing unit start/stop as well as the ambiend air temperature wherein the air precooling system starts only after the ambient air temperature crosses 33 deg C and switches off when ambient goes beloe 33 deg C.
Charges for Installation, Testing and Commissioning Installation, testing and commissioning of all above equipment / material as per the system requirement. All tools and tackles, welding machines, welding rods and gases etc. required for fabrication, erection, testing and commissioning shall be arranged by the contractor at his cost. The plant shall be erected, tested, commissioned as per Consultant's approved drawings / specifications and instructions to his and Employer's satisfaction. The refrigeration system shall be pressure tested and evacuated as per standard practice before charging the refrigerant. The water lines shall also be pressure tested as per standard practice. The plant shall be run for a period of three days after commoissioning by the contractor, to assess the plant performance. The contractor shall provide 3 hard copies of operation & maintenance for the plant along with as built drawings. The contractor shall also arrange the training of the operating staff for proper operation & maintenance of the plant (included in above rates)
PART IV - VENTILATION SYSTEM Single stage air cooling system as per the general technical specifications For Procesing Hall Supply Air -- Single stage Evaporative cooling unit. SITC of single stage evaporative air cooling units with double skin sheet metal construction 25+/-2 mm thick, CFC free PUF injected (Density 40+/-2 Kg/Cum).The unit shall have DIDW forward/backward curved blowers ,VFD compatible IE2 squirrel cage induction motor, heavy duty GSS base, the evaporative cooling pads minimum 100 mm thick (Munters / Eqvt make) designed for max 150 m/min face velocity, FRP/SS water tank with suitable arrangement for maintaining required water level., water circulating pump with associated UPVC piping, fittings, valves etc , air pre-filters Removable cleanable Al / HDP filter suitable for 90% efficiency upto 20 microns., vibration isolation pads,canvass made of heavy cloth with gaskets to join unit outlet wiht supply air duct, volume control damper etc. Units supplied should be dismantle able type from various sections to suit site conditions & installation. Cap. : 31000 cmh of 15 mm wg.exteranl static pressure.
PART IV- VENTILATION SYSTEM Exhaust Fans For Processing Hall ,for single stage evaporative air cooling system as per the capacity specified below and complete with (a) Fan with direct coupled motor (b) Mounting ring and brackets (c') Gravity louvers (d) Bird screen Cap. : 11000 cmh of 2.5 mm wg.sp.
PART IV- VENTILATION SYSTEM - Air Ducting for ventilation system (round /square) with GI sheets as per IS 655 standard duly painted as per the shade required by the architect and insulated with 25 mm EPDM / Nitrile rubber / XLPE insulation with factory backed aluminium foil applied using suitable self adhesive. All necessary supports, etc to be included in the rate. 20 gauge (1.0 mm)
PART IV- VENTILATION SYSTEM - Air Ducting for ventilation system (round /square) with GI sheets as per IS 655 standard duly painted as per the shade required by the architect and insulated with 25 mm EPDM / Nitrile rubber / XLPE insulation with factory backed aluminium foil applied using suitable self adhesive. All necessary supports, etc to be included in the rate. 22 gauge (0.8 mm)
PART IV- VENTILATION SYSTEM - Air Ducting for ventilation system (round /square)with GI sheets as per IS 655 standard duly painted as per the shade required by the architect and insulated with 25 mm EPDM / Nitrile rubber / XLPE insulation with factory backed aluminium foil applied using suitable self adhesive. All necessary supports, etc to be included in the rate. 24 gauge (0.63 mm)
PART IV- VENTILATION SYSTEM - Supply and installation of supply air linear grills in aluminium powder coated construction with shade as required by architect along with matt finish aluminium dampers for sizes as may be required.
PART IV- VENTILATION SYSTEM - Toilets - Exhaust Fans - approx 230 mm dia as per the capacity specified below and complete with (a) Fan with direct coupled motor (b) Mounting ring and brackets (c) Gravity louvers (d) Bird screen Necessary electrical cabling etc shall be included in the cost.
PART IV- VENTILATION SYSTEM - Exhaust Fans- Packing Material Store & crate storage as per the capacity specified below and complete with (a) Fan with direct coupled motor (b) Mounting ring and brackets (c) Gravity louvers (d) Bird screen Cap. : 4500 cmh Necessary electrical cabling etc shall be included in the cost.
PART III - VENTILATION SYSTEM - Air Curtains for Pre-Cooling Chamber, staging cold room Supply & fixing of industrial type air curtains suitable for door clear opening size as mentioned and specifications given below. The Air Curtains shall incorporate centrifugal blowers made of SS / Aluminium with sealed ball bearings. The blowers shall be statistically and dynamically balanced. The motor shall be of standard make suitable for operation on single phase or three phase AC supply. The casing shall have a sturdy construction in SS304 finish. Adjustable louvers shall be provided for streamlining the air delivery.Air velocity to be in the range of 12 to 15 m/s. Proximity sensor with controller switch (limit switch) to be provided to ensure that the air curtain operates only when the door is open. Necessary fixing arrangement including sturdy brackets or base frame to bring the air curtain to the required level for proper air flow shall also be included in the cost. Necessary cabling in casing-capping / conduits as required by architects/owners from the switch points provided near the door shall also be included in the costing. Suitable for Clear opening size: 1500 mm x 2600 mm ht
PART III - VENTILATION SYSTEM - Air Curtains for processing area to Ante-Room, Ante-room to dispatch dock Supply & fixing of industrial type air curtains suitable for door clear opening size as mentioned and specifications given below. The Air Curtains shall incorporate centrifugal blowers made of SS / Aluminium with sealed ball bearings. The blowers shall be statistically and dynamically balanced. The motor shall be of standard make suitable for operation on single phase or three phase AC supply. The casing shall have a sturdy construction in SS304 finish. Adjustable louvers shall be provided for streamlining the air delivery.Air velocity to be in the range of 12 to 15 m/s. Proximity sensor with controller switch (limit switch) to be provided to ensure that the air curtain operates only when the door is open. Necessary fixing arrangement including sturdy brackets or base frame to bring the air curtain to the required level for proper air flow shall also be included in the cost. Necessary cabling in casing-capping / conduits as required by architects/owners from the switch points provided near the door shall also be included in the costing. Suitable for Clear opening size: 2000mm X 2600mm ht
PART III - VENTILATION SYSTEM - processing area entry, holding area, material store, waste disposal, holding, receivig Supply & fixing of industrial type air curtains suitable for door clear opening size as mentioned and specifications given below. The Air Curtains shall incorporate centrifugal blowers made of SS / Aluminium with sealed ball bearings. The blowers shall be statistically and dynamically balanced. The motor shall be of standard make suitable for operation on single phase or three phase AC supply. The casing shall have a sturdy construction in SS304 finish. Adjustable louvers shall be provided for streamlining the air delivery.Air velocity to be in the range of 12 to 15 m/s. Proximity sensor with controller switch (limit switch) to be provided to ensure that the air curtain operates only when the door is open. Necessary fixing arrangement including sturdy brackets or base frame to bring the air curtain to the required level for proper air flow shall also be included in the cost. Necessary cabling in casing-capping / conduits as required by architects/owners from the switch points provided near the door shall also be included in the costing. Suitable for Clear opening size: :2000 mm x 2100 mm ht
PART III - VENTILATION SYSTEM - Air Curtains for Workers entry,Lab, PQ area etc Supply & fixing of industrial type air curtains suitable for door clear opening size as mentioned and specifications given below. The Air Curtains shall incorporate centrifugal blowers made of SS / Aluminium with sealed ball bearings. The blowers shall be statistically and dynamically balanced. The motor shall be of standard make suitable for operation on single phase or three phase AC supply. The casing shall have a sturdy construction in SS304 finish. Adjustable louvers shall be provided for streamlining the air delivery.Air velocity to be in the range of 12 to 15 m/s. Proximity sensor with controller switch (limit switch) to be provided to ensure that the air curtain operates only when the door is open. Necessary fixing arrangement including sturdy brackets or base frame to bring the air curtain to the required level for proper air flow shall also be included in the cost. Necessary cabling in casing-capping / conduits as required by architects/owners from the switch points provided near the door shall also be included in the costing. Suitable for Clear opening size: approx. :1200 mm x 2100 mm ht
Supply, installation, Testing & Commissioning of Fully automated, Grading, sorting, washing, waxing line for Sweet Lime and other citrus fruits ·Lane Two ·Outlet 12 ·Produce: sweet lime or other Citrus fruits ·Sorting Speed 660 pcs/min/lane ·Capacity for average weight 156g orange: 8.0-8.6tons/hour ·Function Sorting by weight, diameter, color and blemish .Fully imported . Approved make: Greefa/ Mafroda / Reemoon / Eqvt Approved make
Auto feeding machine with small fruit eliminator machine Air Cylinder, Gear motor, Successive devices Carbon steel frame Transmission chain 12A-D4 with positive and negtive buckles to convey plastic crates Driven plate SUS304 curved Main drive reducer gear motor Brand Name Cheng Pang SUS304 round tube fence Power(KW): 0.75 small fruit eliminator shall be included in the costing
Roller Elevator Conveyor Inner width:1.20 meter Length:Upper surface 1.5 meter,lower surface 0.8 meter Carbon steel frame Bended stainless steel side plate Special Cover for 2 ends of roller Main drive reduction gear motor Brand Name SITI or Transtecno 2pcs of carbon steel chain Danfoss Frequency convertor Power(KW): 1.10
Washing Machine Inner width 1.0 meters Galvanized square tube frame Bended stainless steelSUS304 side plate Bubbling Foam Device One blowing machine 550W 2 lines of Water sprinkler,7pcs of plastic shower-shaped nozzles 20 pcs of stainless steel axle nylon brush Automatic Fruit Pushing Device, motor brand SITI or Transtecno or eqvt approved Stainless Driving Pushing Chain,brand Dong Hua or eqvt approved Main reducer motor, brand Cheng Pang or eqvt approved Power(KW): 1.50
Hot Water Bath Fungcide Machine Inner width 1.0 meters Stainless steel SUS304 section bar for frame Stainless 50*50 square tube Water pump. 4 lines of waterflow Main drive motor,brand SITI or Transtecno or eqvt approved D63 Aluminum Alloy Roller The burner automatically control the temperature of water, recycling heated in metal tube Power(KW): 2.25
Roller conveyor Inner width 1.0meter, length 3 meters Carbon section bar for frame Bended stainless steel side plate Slice baseband Friction belts Special Cover for 2 ends of roller Main drive reducer gear motor Brand Name SITI or Transtecno or eqvt approved 2pcs of carbon steel chain Power(KW): 0.75
Pre-drying Machine SUS304 stainless steel axle with 0.2mm Nylon hair, brushes ×20, 120W gear motor, 750W gear motor Inner width 1.0 meters Galvanized square tube frame Bended stainless steelSUS304 side plate 20pcs Stainless steel axle-cylinder pre-drying nylon brush Automatic Fruit Pushing Device Motor , brand SITI or Transtecno or eqvt approved Stainless Pushing Device Chain,brand Dong Hua or eqvt approved Main drive motor:brand Cheng Pang or JRT or eqvt approved reduction gear motor Power(KW): 0.87
1st Drying Tunnel (Before waxing) Model RMFD-120 / eqvt approved, ø63 Aluminum roller, Stainless steel heat-exchanging device, Heat cycle 550W centrifugal fan, Thermostat ×1, High pressure sluice line, Diesel burner×1, 750W gear motor Lentgh 6meters, inner width 1.0meters Carbon steel 50×150 section bar for frame Carbon steel Main Frame Slice baseband Friction belts 2pcs of Special Nickel-plated Chain Transmission luminium alloy roller conveyor Special Cover for 2 ends of roller 1 set Stainless steel heat exchange system Thermal circulating centrifugal fan Thermal Cycle Axial Flow Fan Automatic thermostat Automatic washing device diesel burner Main drive motor,brand SITI or Transtecno Frequency convertor Power(KW): 4.80
Waxing Machine Model RMFW-120 / eqvt apporved, Screw-type stainless steel brushes ×15, Solenoid valve ×7, Nozzle ×6, 120W gear motor, Wax pump×1, 750W gear motor, Brush auto cleaner Inner width:1.0 meters Galvanized square tube frame Bended stainless steel SUS304 side plate 15pcs of Special spiral horsetail brush with stainless steel axis Automatic Fruit Pushing Device Motor , brand SITI or Transtecno Stainless Pushing Device Chain,brand Dong Hua Main drive motor:brand Cheng Pang or JRT reduction gear motor Wax-spraying solenoid 1 line 5pcs Danfoss spray nozzles Digital Display Dual Control Time Relay to control the wax volumn. Relay brand OMRON or Wax pump Pneumatic cleaning brush device 1 set Power(KW): 1.05 Non Shellac based Wax coating , as Corn extracted , edible coatings being used in Pharmaceutical industry, safe for human consumption is suugested to be used.
2nd Drying Tunnel (After Waxing) Model RMFD-120/ eqvt approved, ø63 Aluminum roller, Stainless steel heat-exchanging device, Heat cycle 550W centrifugal fan, Thermostat ×1, High pressure sluice line, Diesel burner×1, 750W gear motor Lentgh 6 meters, inner width 1.0 meters Carbon steel 50×150 section bar for frame Carbon steel Main Frame Slice baseband Friction belts 2pcs of Special Nickel-plated Chain Transmission luminium alloy roller conveyor Special Cover for 2 ends of roller 1 set Stainless steel heat exchange system Thermal circulating centrifugal fan Thermal Cycle Axial Flow Fan Automatic thermostat Automatic washing device diesel burner Main drive motor,brand SITI or Transtecno Frequency convertor Power(KW): 4.80
Inspection Roller Conveyor with 750W gear motor (VVVF), D63 PVC roller Inner width 1.0meter, length 5meters Carbon section bar for frame Bended stainless steel side plate Slice baseband Friction belts Special Cover for 2 ends of roller Main drive reducer gear motor Brand Name SITI or Transtecno or eqvt apporved make 2pcs of carbon steel chain Manual sorting table Defects output belt exit Lights Power(KW): 1.12
2 lane Electronic Sorting Machine: ·Model Reemoon SECD-12 / Greefa / Mafroda / eqvt approved make, Exits 12, Sorting speed 660 pcs / min, ”V” belt conveyor prealinger-2 lanes (VVVF), Universal rubber D2 Cups, Rollers rotating device ×2 (VVVF), Demand Feed Belt (Recycling belt), Solenoids × 24, 3KW gear motor (VVVF), 750W gear motor, 370W gear motor, German high speed camera ×2, LED lights, IMP ×2, Visual identification system, Engllish Software, Computer with UPS, Blemish system /Camera Visual System V4.1 The sorting machine shall be complete with Frame 50*50 Galvanized square tube, Main drive reducer gear motor Brand Name SITI or Transtecno/ eqvt approved make, Frame 50*50 Galvanized square tube, Sorting speed 660/minute/lane, Sorting effeciency 65%, Accuracy±2(based on 200g weights, 2pcs V Shape Single Fruit Arrangement Conveyor Belt 2pcs Tsubaki Nickel-plated 210A fruit cup conveyor chains, Main drive reducer gear motor Brand Name SITI or Transtecno or eqvt approved make, Plastic D2 cups,pitch distance 92.25mm , suitable for round or oven shape citrus with 50-80mm diamater.Cup wheel angle 75 degree.Consist of cup stand,stainless steel wire,wheel and frame, Sort by weight through HBM Weighing LOADCELL Weight ranged from 20g-300g A11+A12 Frame 50*50 Galvanized square tube 24pcs. Solenoid quantity:24pcs, 12 PVC belt exits Power(KW): 2.20 Vision System Compatible with 2 lane electonic sizer, High Resolution Industrial Basler Camera, High quality camera lens REEMOON / eqvt approved make Patented LED stroboscopic light source, REEMOON / eqvt approved make Patented Visual Recognition System, Color Recognition by UV, H Chromatography and Gray Image Technology To sort the color and shape and surface accurately, Size sorting accuracy +1 mm (Repetition accuracy of standard objects), Color sorting accuracy +5% (standard color ball repetition accuracy) Sort by blemish,diameter,color, Power(KW): 0.10
Control Cabinet with SIEMENS /eqvt approved make PLC,SIEMENS/ eqvt approved make HMI, Auto Control Touch Screen, A14 Computer and 26" screen, Danfoss Frequency convertor, Unattended Power Source, Power(KW):1.0. Electrical Power, contorl wiring, earthing etc. as per standrad practice for the above mentioned machines shall be included in the costing.
Pallets Dimensions: 1000mm X 1200mm X 150 mm approx. ht Colour: as approved by client Pallet type: four side fork opening Weight carrying capacity: 1500 Kg Suitable to use with all kind of material handling equipments including hand pallet trucks etc. Working Temperature range: (-) 25 deg C to (+) 10 deg C heavy duty type, Top Deck : Perforated MOC Shall be food grade plastic/HDPE and shall have excellent impact strength and high compression resistance. Acceptable makes: Nilkamal/Supreme / Eqvt
Miscellaneous Items : PVC Crates suitables for handling fresh fruits Nikamal make Model - JBC 64160 or eqvt.
Miscellaneous Items : Weighing balance in SS construction of 150 Kg. each digital type, Sansui model no:SPP SS 150 / Eqvt
Miscellaneous Items : Carton Strapping Machine Semi Automatic 800 mm max. size of product may be considered. Make model : Novastrap-Pack NP-306 / Robertseal Corp. EXS-306 / Eqvt
Miscellaneous Items : Lab Equipments of reputed makes a) Temprature Probes to measure temprature of the fruit - 6 nos b) Refractometer to check the total soluble solids - 2 no. c) Calipers to measure size of the fruit - 4 no. d) Differntial Colour Charts to Check Colour of the fruit - 2 no. e) Penetrometer to measure Pulp pressure - 2 no. f) pH measuring probe to measure pH - 2 no. g) Microscope with camera feature - 2 no. h) other related equipments as may be required i) illuminated magnifier- 1 no
Miscellaneous Items : Insect Killer, “Russell” ‘Carolyn’ Glue Board Insect Killer/ Eqvt, Stainless Steel Body 304 with stainless steel screws and stainless steel grills with glue board, suitable mounting arrangment. Confirming to CGMP & food safety standards.
Miscellaneous Items : Packing Tables with S.S. tops size 2400 x 1200 Size - 1800 x 900
Miscellaneous Items : For Office SITC of Hi-wall type split AC units, BEE 3 star rated (suitable for cooling mode only) including condensing unit and indoor unit with necessary refrigerant piping, duly insulated with Nitrile / EPDM insulation and drain piping to be led to the nearest drain point.,Electrical cabling between condenser & evaporator to be included. Wireless Remote Controllers for Hi-wall Units with battery and ON/OFF functions along with temperature setting, etc. to be included. Sturdy MS Stand with two coats of primer and two coats of oil paint of approved colour etc as required & Floating foundations of concrete blocks (if required), rubber pads to be included. Capacity: 3.517 kW (1.0 TR)
Hydraulically Operated Hand Pallet Truck Type : Hydraulically operated Hand Pallet Truck Manufacturer : Godrej / Toyota / Linde / Jungheinrich / Nilkamal / Josts / Eqvt. Model No. : to be mentioned Load Capacity in kgs: 1500 kg Fork Length in mm (Suitable for liifting pallet of size of 1000 mm X1200 mm X154 mm ) Wheel MOC : Nylon / Polyurethane Suitable for heavy duty operation and long life,
Miscellaneous Items : Weigh bridge suitable for 60 MT capacity complete as per following specification. Make: Standard Indian / Imported. Please indicated the make Type: Electronic load cell based, pitless. Capacity: 60 MT. Least count: 5 Kgs. ,Platform size: 16 M x 3 M. approx. Material of construction of platform: Mild steel structure finished with one coat of Red Oxide primer and Black enamel finish. Top deck : MS Plate with adequate section suitably ribbed to avoid skidding. Load sensors and type of Strain Guage: “P.T.” double-ended shear beam load cell. Foil type strain gauges. Bridge resistance: 700 OHMS. (Nominal). No. of load cells: 16 Nos or as recommended by manufacturer Safe over load capacity: 150 % of rated capacity. Ultimate over load capacity: 300 % of rated capacity. Display: Digital. Resolution: Same as least count. Tare facility: Push button. Weighing method: Static. Calibration: Auto – Calibration facility. Computer interface: In – built RS 232 C Port facility. Power supply required: 230 V, 50 Hz, Single phase. Operating temperature: 10 Deg. C. to 55 Degree C. System Accuracy : +/- 0.05% full scale or as per IS 9821 specification (Part I to IV) The work shall include supply, Installation , Testing and Commissioning of the weigh bridge PC with 19 inch monitor , UPS and printer also shall be supplied and costing for the same also shall be considered.
SITC of RO water plant of cpacity 5000 lph complete with raw water pump CRI/kirloskar/ eqvt, sand filter, carbon filter, anti-scaling dosing system, micron cartridge filter (5 micron) ss316 construction, high pressure pump in SS construction, RO product water storge tank, raw water storage TANK, Membranes (imported), solenoid valves, auto flushing system, designed noise less fittings, dosing pump & tank inside cabinet, control panel fro operation, power control cabling, earthing, multi port valve, back wash & service mode MPV, float switch for tank operation, sturdy skid frame in SS construction etc. as may be required.
Covid-19 Health and safety: Providing and making necessary arrangements of various essential materials and items of recommended quality and make as per guidelines of the health department required for prevention of COVID-19 pandemic in consideration of health and safety management of man power at construction site 1. Hand Sanitizer. 2. Disinfectant. 3. Sodium Hypochlorite. 4. Fogging machine and Liquid for sanitization. 5. 3 Ply Face Mask of good quality. 6. Surgical / Latex Gloves of good quality. 7. Rubber Gloves of good quality. 8. Empty Spray Bottles (Plastic). 9. PPE kits. 10. Temperature Guns. 11. Face shield
NATHANI PAREKH CONSTRUCTIONS PVT LTD
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid