Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹88.9 LAccepted-AOC | ₹88.9 L Quoted ₹93.6 L | 1 | Accepted-AOC WORK AWARDED |
| 2 | 2₹95.2 LRejected-AOC 25 A RR SAMY LANE KATTOOR COIMBATORE 641009 | COIMBATORE | COIMBATORE | TAMIL NADU | 641009 | ₹95.2 L | 2 | Rejected-AOC Second Lowest |
| Sl No | Description | Qty | Unit | rv electricals L2 | SETHARAM ELECTRICAL AND CONSTRUCTION L1 |
|---|---|---|---|---|---|
| 1.00 | Design, Engineering, renewal by supply, fabrication, erection, testing, commissioning and handing over of 1No 20 persons capacity Gearless passenger cum bed lift without machine room as per the following Technical specifications.
Technical specifications:
1. Location: Government Villupuram Medical College Hospital Critical Care Building
2. No of Lift : 1 No
3. Type of lift : passenger cum bed lift.(1768Kgs)
4. Capacity of lift : 20 persons capacity Gearless passenger cum bed lift
5. Speed : 1.0 M / Sec
6. Type of Drive: Specific variable voltage variable frequency V3F drive with enhanced ride comfort and near Zero leveling functions.
7. No. of floors: 5 (Ground +4 floors)
8. Total Travel : 23.8 mtrs Travel.
9. Leveling Accuracy: High level accuracy with smooth & jerk free stopping
10. Construction of Car: 18SWG High quality S.S 304 Grade car Neat hairline finish, S.S hand rail, SS floor line finish, Perspex false ceiling, stretcher impact protection.
11. Position of machine: Directly above the lift well.
12. No. of landing entrance: one in front 4 Nos
13. No. of car entrance: one in front only
14. Car entrance door: power operated V3F drive side opening sliding 18SWG stainless steel hair line finish.
15. Landing entrance door: power operated V3F sliding, opening 18SWG stainless steel hair line finish with provision for emergency key
16. Lift well existing: 3000mm x 3000mm | 2 | Nos | 30,00,000 ₹60 L | 29,50,000 ₹59 L |
| 1.0117. Lift pit depth available : 2000mm 18. Car size (Clear inside): 1300mm (wide) x 2400mm (Depth) 19. Car clear opening: 1500mm width x 2800mm height 20. Lift machine room available: 4350mm width x 5500mm 21. Power supply: 400/440 3 phase, 50 Cycles/sec A.C. supply for power and 230 V, 50 HZ, single phase, supply for lighting. 22. Control: Micro processor based simplex selective collective simplex 23. Car fittings: sleek LED light fitting with 300mm sweep cabin fan 24. Lift well: R.C.C. construction with brick masonry. 25. Indication: UP/Down digital direction and position indicator for all landing and in car (25mm Height, seven segment Digital Floor position indicator scrolling type) 26. Emergency Alarm Bell: Battery operated alarm bell to be provided with Automatic charging device. 27. Emergency light: Battery operated light to be provided with Automatic charging device. 28. Fireman’s switch: To be provided at ground floor 29. Minor builders work: to be provided by lift contractor. 30. Scaffolding: to be provided by lift contractor. 31. Sill angles and facia plates: to be provided by lift contractor 32. Steel for lift machinery: to be provided by lift contractor 33. Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by the lift contractor during the guarantee period of one year. | |||||
| 1.0234. Automatic Rescue Device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, invertor, under voltage protection system etc., complete with all accessories. 35. Provision of intercom with phone: To be provided by lift contractor 3 points EPABX system at three places vide 1) inside the car 2) Head room 3) at ground floor attender room 36. Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor. 37. Floor announciator with music, included 38. Special features: a. Infra red door sensor with full height screen. b. Tubular S.S hand rail in cars. c. Voltage stabilizer for circuit control. d. Stainless Steel signal fixtures. e. Vendal proof S.S. Button with S.S. cover f. SS hairline finish door frames for landing doors. g. VF door Register signal h. Call Register signal i. Stainless steel facia plate for car operating panel and landing fixtures. j. Steel ladder for machine room and ladder for lift Shaft pit, k. On – Off switch for fan and light l. Over load warning indicator With audio announcement. m. Fall width half height rear panel mirror. | |||||
| 1.0339. Provision of architraves covering all three sides up to a width of 300 decorum sheet of plywood with TW frame with aluminum beading architraves should also cover the thickness of still level door frame at the landing and indicator boxes at all landings. 40. Other standard features: Voltage stabilizer for control units, Over speed governor, phase failure and phase reversal relay alarm bell, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, single reduction worm gear, electromagnetic brake with compression springs car safety gears buffer, electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limits switch, main suspension ropes counter weights lifting hoist for mounting the machineries. 41. Guarantee: Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period not less than one year. 42. Site testing in accordance with IS 14665 should be carried out at the time of handing over. Necessary spares and tools required for the maintenance for a period of one year 43. Supply of operation and maintenance manual with Necessary tools for Operation. The list of tools required should be detailed by the contractor in a separate sheet duly signed by contactor. (Johnson/KONE/ OTIS / Equivalent) | |||||
| 2.00 | Supply 11 TR norminal capacity ceiling suspended ductable air conditioner with the following components. 11 TR capacity ceiling suspended Ductable Air conditioner high tech,low height,low noice level indoor unit with fin and tube type cooling coil,Detachable type drier provided in refrigerant cicuit to reduce moisture content multi stage type distributor for feeding equal quantities of the refrigerant mixture to all the section of the coil,with required valves,directly coupled blower to reduce troubles and wear & tear compared to belt drive blower.Thermostatic expansion valve lift and pull type aluminum framed durable,washable air filter.Integrated electrical panel with complete microprocessor control with display for easy operation and maintenance of unit common operating conditions of 45 F suction temperature Auto reset type HP/LP safety cut to improve reliability of compressor. (Red Zone) | 1 | No | 4,00,000 ₹4 L | 3,99,000 ₹4.0 L |
| 3.00 | Supply and filling of R-22 Refrigerant gas. | 15 | Kg | 550 ₹8,250 | 549 ₹8,235 |
| 4.00 | Supply and fixing of hard drawn copper refrigerant piping of 5/8” dia interconnecting indoor and outdoor units with necessary fittings, supports etc., | 138 | Mtrs | 1,000 ₹1.4 L | 990 ₹1.4 L |
| 5.00 | Supply and fixing of hard drawn copper refrigerant piping of 7/8” dia interconnecting indoor and outdoor units with necessary fittings, supports etc., | 20 | Mtrs | 200 ₹4,000 | 199 ₹3,980 |
| 6.00 | Supply and fixing of flexible canvas connection between indoor unit and ducting and rubber pads. | 1 | No | 2,500 ₹2,500 | 2,500 ₹2,500 |
| 7.00 | Supply, Fabrication and erection of fabricated ducting 22 gauge sheet made up of Aluminium sheets of complete with MS angle supports angle flanges, anchor fastess, tees and bends where ever necessary etc as required. | 15 | Sq.m | 1,100 ₹16,500 | 1,099 ₹16,485 |
Updated dates
Tender Value
₹88.9 L
EMD Value
₹54,500
Closing Date
16 Dec 2025, 3:00 pmClosed
The Superintending Engineer, PWD.,
The Superintending Engineer, PWD., Buildings Construction and Maintenance Circle,Tiruvannamalai-4.
Providing 2 Nos of 20 Persons bed cum Passenger lift, Ductable AC, split type AC, lightening arrester arrangements to the 100 Bedded Critical Care building in Government Villupuram Medical College and Hospital at Mundiyampakkam in Villupuram District
2025_PWD_628180_1
48/TVM-CLE/25-26/2/ Dt.18.11.2025
Open Tender
Electrical Works
90 days
Mundiyampakkam
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹54,500
13 Mar 2026
9 Dec 2025
16 Dec 2025
9 Dec 2025
16 Dec 2025
9 Dec 2025
Amount
Design, Engineering, renewal by supply, fabrication, erection, testing, commissioning and handing over of 1No 20 persons capacity Gearless passenger cum bed lift without machine room as per the following Technical specifications. Technical specifications: 1. Location: Government Villupuram Medical College Hospital Critical Care Building 2. No of Lift : 1 No 3. Type of lift : passenger cum bed lift.(1768Kgs) 4. Capacity of lift : 20 persons capacity Gearless passenger cum bed lift 5. Speed : 1.0 M / Sec 6. Type of Drive: Specific variable voltage variable frequency V3F drive with enhanced ride comfort and near Zero leveling functions. 7. No. of floors: 5 (Ground +4 floors) 8. Total Travel : 23.8 mtrs Travel. 9. Leveling Accuracy: High level accuracy with smooth & jerk free stopping 10. Construction of Car: 18SWG High quality S.S 304 Grade car Neat hairline finish, S.S hand rail, SS floor line finish, Perspex false ceiling, stretcher impact protection. 11. Position of machine: Directly above the lift well. 12. No. of landing entrance: one in front 4 Nos 13. No. of car entrance: one in front only 14. Car entrance door: power operated V3F drive side opening sliding 18SWG stainless steel hair line finish. 15. Landing entrance door: power operated V3F sliding, opening 18SWG stainless steel hair line finish with provision for emergency key 16. Lift well existing: 3000mm x 3000mm
34. Automatic Rescue Device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, invertor, under voltage protection system etc., complete with all accessories. 35. Provision of intercom with phone: To be provided by lift contractor 3 points EPABX system at three places vide 1) inside the car 2) Head room 3) at ground floor attender room 36. Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor. 37. Floor announciator with music, included 38. Special features: a. Infra red door sensor with full height screen. b. Tubular S.S hand rail in cars. c. Voltage stabilizer for circuit control. d. Stainless Steel signal fixtures. e. Vendal proof S.S. Button with S.S. cover f. SS hairline finish door frames for landing doors. g. VF door Register signal h. Call Register signal i. Stainless steel facia plate for car operating panel and landing fixtures. j. Steel ladder for machine room and ladder for lift Shaft pit, k. On – Off switch for fan and light l. Over load warning indicator With audio announcement. m. Fall width half height rear panel mirror.
39. Provision of architraves covering all three sides up to a width of 300 decorum sheet of plywood with TW frame with aluminum beading architraves should also cover the thickness of still level door frame at the landing and indicator boxes at all landings. 40. Other standard features: Voltage stabilizer for control units, Over speed governor, phase failure and phase reversal relay alarm bell, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, single reduction worm gear, electromagnetic brake with compression springs car safety gears buffer, electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limits switch, main suspension ropes counter weights lifting hoist for mounting the machineries. 41. Guarantee: Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period not less than one year. 42. Site testing in accordance with IS 14665 should be carried out at the time of handing over. Necessary spares and tools required for the maintenance for a period of one year 43. Supply of operation and maintenance manual with Necessary tools for Operation. The list of tools required should be detailed by the contractor in a separate sheet duly signed by contactor. (Johnson/KONE/ OTIS / Equivalent)
Supply 11 TR norminal capacity ceiling suspended ductable air conditioner with the following components. 11 TR capacity ceiling suspended Ductable Air conditioner high tech,low height,low noice level indoor unit with fin and tube type cooling coil,Detachable type drier provided in refrigerant cicuit to reduce moisture content multi stage type distributor for feeding equal quantities of the refrigerant mixture to all the section of the coil,with required valves,directly coupled blower to reduce troubles and wear & tear compared to belt drive blower.Thermostatic expansion valve lift and pull type aluminum framed durable,washable air filter.Integrated electrical panel with complete microprocessor control with display for easy operation and maintenance of unit common operating conditions of 45 F suction temperature Auto reset type HP/LP safety cut to improve reliability of compressor. (Red Zone)
Supply and filling of R-22 Refrigerant gas.
Supply and fixing of hard drawn copper refrigerant piping of 5/8” dia interconnecting indoor and outdoor units with necessary fittings, supports etc.,
Supply and fixing of hard drawn copper refrigerant piping of 7/8” dia interconnecting indoor and outdoor units with necessary fittings, supports etc.,
Supply and fixing of flexible canvas connection between indoor unit and ducting and rubber pads.
Supply, Fabrication and erection of fabricated ducting 22 gauge sheet made up of Aluminium sheets of complete with MS angle supports angle flanges, anchor fastess, tees and bends where ever necessary etc as required.
Supply and fixing of water drain pipe line (1 inch PVC pipe).
Supply and fixing of duct mouth dampers.
Supply and providing thermal insulation of 9 mm thick vidoflex with aluminum foil.
Supply and fixing of extruded aluminum powder coated supply and return air grilles/diffusers with volume control damper.
Supply, fabrication and fixing of MS Channel for Mounting the Airconditioning Indoor Unit.
Supply and fixing of suitable MS angle frame for mounding the outdoor unit.
Supply erection, Testing and commissioning of 2 TR split type 3 star rated AC units fitted with hermetically sealed Air compressor with R22 refrigerant air cooled condenser, fan etc. and 1 No indoor Hi wall mounted 2.0 TR capacity evaporator unit complete with cooling coil, blower motor and connected accessories, control etc chord wire connecting indoor and outdoor unit with drain pipe suitable for operation on 230V + 10% 50Hz sinle phase AC supply. (Make - Carrier/ Daikin/ Toshiba)
Supply and fixing of 5 KVA voltage stabilizer (V guard /Eq.make ) suitable for 2.0 tons capacity split type air conditioner with 3 minutes time delay and low / high voltage cut off switch (wall mounting) with necessary wire connection.
Supply and Fixing of MS stand for fixing outdoor units. (For Split outdoor unit)
Supply and fixing of Aluminium alloy solid Round Conductor with 8mm dia of material AIMgSi as per IEC 62561-2 withg Conductor Holder, glue, Connectors, joints etc.
Supply and fixing of Air Termination rod 16/10 mm (Lightening rod) 4 mtrs.
Supply and fixing of Lightening Counter- LCD display and battery
Supply and fixing of S.S test Joint.
Supply and fixing of Rust resistant non corrosive 10mm dia copper bonded stainless steel round conductor for Earth Termination.
Supply and fixing of S.S Conductor Holder.
Supply and fixing of Maintanence Free Earthing with copper rod of 17.2 mm dia and 3m length.
Supply and run of 25mm x 6mm GI Strip with necessary clamps / supports on wall / floor / ground for earth connection.
Supply and fixing of Cabinet type class 1 & 2 combined surge arrestor.
rv electricals (BID ID -1534425)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
MundiyampakkamLift_Cond.pdf
Tender Documents • 0.50 MB
BOQ_751050.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid