REPAIR/MAINT OF DG SETS, VOLTAGE STABILIZERS, WASHING MACHINE, AIR COMPRESSOR, SECURITY/STREET LIGHTS, SEWAGE INSTALLATION/PUMP HOUSE, STP AND ALLIED WORKS AT AURANGABAD UNDER GE (S) AHMEDNAGAR

Amount

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundations or laying of cables etc and getting out in soft/loose soil complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming of soil in layers not exceeding 25 cm thick complete all as specified and as directed

Removing excavated soil to distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed

M&L for sand cushioning with natural dry unwashed river sand and punning down in layers complete all as specified and as directed Note : For measurement purpose only punned thickness of sand shall be measured.

M&L for checking, inspection, maintanance and servicing of 100 KVA DG Set complete including replacement of unserviceable spare parts of the DG set (comprising of engine/alternator/control panel) for smooth functioning complete all as per manufacturers instructions and all as directed A. (a) Checking of lubricating oil condition. (b) Checking engine for oil, water leakage and correcting the same (c) Checking of all the nut bolts of engine and alternator (d) Checking of all belts and adjust the tension properly (e) Cleaning of air filters (f) Checking and readjusting the valve clearance (g) Change of oil/fuel filters and engine oil if necessary (h) Checking of starter motor battery and charger (i) Checking of cooling system and fuel system (j) Checking of all power cables and AVR connections and mounting bolt tightnees of alternator (k) Checking the function of AVR general checks (l) Checking of control panel meters and gadgets functiong (m) Checking of all control and safety wirings. B. (a) Checking of flexible coupling of engine and alternator (b) Cleaning of crank case ventilation pipe (c) Checking of injectors and fuel pump (d) Checking of alternator and carbon brushes. NOTE (1) Cost of spare parts shall be measured and paid separately (2) Servicing/routine check up carried out through authorised service centre of manufacturer (3) Make of spares shall be as per existing make of DG set.

All as per serial item No 5 but for 40/30 KVA DG Set

All as per serial item No 5 but for 15 KVA DG Set

S&F in repair air cleaner assembly (inner & outer) suitable for 100 KVA DG set complete all as specified and directed

All as per serial item No 8 but for 40/30 KVA DG Set

All as per serial item No 8 but for 15 KVA DG Set

S&F in repair fuel filter element (Primary & Secondary) for 100 KVA DG set complete all as specified and as directed

All as per serial item No 11 but for 40/30 KVA DG Set

All as per serial item No 11 but for 15 KVA DG Set

S&F in repair oil filter element with 'O' ring washer for 100 KVA DG set complete all as specified and as directed

All as per serial item No 14 but for 40/30 KVA DG Set

All as per serial item No 14 but for 15 KVA DG Set

S&F in repair 'V' belt for radiator/water pump as per sample suitable for 100 KVA DG set complete all as specified and as directed

All as per serial item No 17 but for 40/30 KVA DG Set

All as per serial item No 17 but for 15 KVA DG Set

S&F in repair fuel pipe with banjo bolt at both side suitable for 100 KVA DG set complete all as specified and as directed

All as per serial item No 20 but for 40/30 KVA DG Set

All as per serial item No 20 but for 15 KVA DG Set

S&F in repair dynamo as per sample for 100 KVA DG set complete all as specified and as directed

All as per serial item No 23 but for 40/30 KVA DG Set

M&L for changing/toping up of approved quality engine oil 20W40 / 10W30 type for various type/capacity DG sets including removing of old burnt engine oil from DG sets complete all as specified and as directed

Supply and filling distilled water in battries of DG sets complete all as specified and directed.

S&F in replacement, auotmatic voltage regulator (AVR) 24 volt suitable for 100 KVA DG set complete all as specified and as directed

All as per serial item No 27 but for 40/30 KVA DG Set

All as per serial item No 27 but for 15 KVA DG Set

S&F in replacement, water pump assembly for100 KVA DG set complete all as specified and as directed

All as per serial item No 30 but for 40/30 KVA DG Set

S&F in replacement, self starter for 100 KVA DG set complete all as specified and as directed

All as per serial item No 32 but for 40/30 KVA DG Set

S&F in replacement, fan hub assembely for 100 KVA DG set complete all as specified and as directed

All as per serial item No 34 but for 40/30 KVA DG Set

M&L for taking out burnt winding of exciter of 100 KVA DG sets including rewinding copper wire of super quality of existing size, No of turns, varnishing, heating complete including testing on full load

All as per serial item No 36 but for 40/30 KVA DG Set

All as per serial item No 36 but for 15 KVA DG Set

M&L for cleaning of radiator for 100 KVA DG set by using Keroscene oil and radiator cleaning solution (ready to wash) by pressure pump and brush including necessary welding/brazing work to the leakage if required complete all as specified and as directed

All as per serial item No 39 but for 40/30 KVA DG Set

All as per serial item No 39 but for 15 KVA DG Set

M&L for complete wiring to LT panel of DG set of any capacity with all connected items and replacement of voltmeter, ammeter, RPM & HRS meter with digital display, oil pressure gauge, oil temperature gauge, solenoid switch, LED type indicator lamp set of three including CT PT for 3 phase ampere meter upto capacity of 60 Amp including taking down old wiring and voltmeter, ammeter, RPM & HRS meter with digital display, oil pressure gauge, oil temperature gauge, solenoid switch, LED type indicator lamp (set of three) complete all as specified and as directed.

S&F in replacement, air hose set with all necessary fittings for 100 KVA DG set complete all as specified and as directed

All as per serial item No 43 but for 40/30 KVA DG Set

All as per serial item No 43 but for 15 KVA DG Set

S&F in replacement, water hose pipe set with all necessary fittings for 100 KVA DG set complete all as specified and as directed

All as per serial item No 46 but for 40/30 KVA DG Set

All as per serial item No 46 but for 15 KVA DG Set

S&F in replacement, lub oil pump suitable for 100 KVA DG set complete all as specified and as directed

All as per serial item No 49 but for 40/30 KVA DG Set

All as per serial item No 49 but for 15 KVA DG Set

Supply and laying 2.50mm thick synthetic rubber insulated mats of size 2m x 1m size for voltage up to 11 KV for electrical purpose as per IS 15652-2006, (superseeding IS-5424) suitable for electrical shock safety complete all as specified and as directed

S&F in replacement, oil pressure gauge for DG set of capacity up to 100 KVA complete all as specified and as directed

M&L in repairs/replacement for earthing with galvanised steel earth plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised Iron strip of 32 x 6 mm as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 2009(Part-I) complete all as specified and directed.

S&F in replacement, thermostat valve suitable for 100 KVA DG set complete all as specified and as directed

All as per serial item No 55 but for 40/30 KVA DG Set

All as per serial item No 55 but for 15 KVA DG Set

S&F in replacement, oil seal front and rear side for 100 KVA DG set complete all as specified and as directed

All as per serial item No 58 but for 40/30 KVA DG Set

All as per serial item No 58 but for 15 KVA DG Set

S&F in replacement, battry terminal for DG sets complete all as specified and as directed

S&F in replacement, battery cable assembly with copper conductor multistranded RED and BLACK colour 2m long 16Sqmm for connection to self starter unit to battery unit complete all as specified and as directed

M&L for calibration of FIP including supply & fix in replacement plunger, DV, governor wet O-Ring, pin roll, barrel, pin ball bearing spring, washer and testing for 100 KVA DG set complete all as specified and as directed

All as per serial item No 63 but for 40/30 KVA DG Set

Supply and filling coolant liquid for DG set complete all as specified and directed.

M&L for prepration of old surfaces of DG Sets, preparing the surfaces by rubbing with fine emery paper and making the surface smooth and re-painting with two coats of super quality synthetic enamel paint by spray gun fully matched with its original colour and making good entire DG Set ( Engine, Alternator, foundation ,Diesel Tank and Radiator unit including canopy) and including marking SM/MES No on DG Sets with diffrent paint maintaning colour code to the 100 KVA DG set complete all as specified and as directed

All as per serial item No 66 but for 40/30 KVA DG Set

M&L in replacement, exhaust silencer for 100 KVA DG Set complete all as specified and as directed

All as per serial item No 68 but for 40/30 KVA DG Set

S&F in replacement, off load change over (side handle) switch 415 Volt in sheet metal enclosure 4 pole of capacity 63 Amps with connecting acessories complete all as specified and as directed.

S&F in replacement, off load change over ( side handle) switch 415 Volt in sheet metal enclosure 4 pole of capacity 125 Amps with connecting acessories complete all as specified and as directed

S&F in repair, radiator cap for 100 KVA DG set all as specified and as directed.

S&F in repair, radiator cap for 40/30 KVA all as specified and as directed.

S&F in repair, outer glass and gasket for 100 KVA all as specified and as directed.

S&F in repair, solenoid switch for 100 KVA DG set all as specified and as directed.

S&F in repair, solenoid switch for 40/30 KVA DG set all as specified and as directed.

S&F in repair, solenoid switch for 15 KVA DG set all as specified and as directed.

M&L for draining out fuel from the fuel tank of 100 KVA DG set and keeping it in a separate container, cleaning the fuel tank all internally & externally by removing all the accumulated sediments, leak testing of tank and welding/brazing including one coat of black synthetic enamel paint over a coat of red oxide primer and refixing the tank to its original position & refilling the fuel back into the tank all as specified and as directed.

All as per serial item No 78 but for 40/30 KVA DG Set

All as per serial item No 78 but for 15 KVA DG Set

S&F in repair, power contactors of AC1 upto 210 Amps 3 pole 415 volts all as specified and as directed.

S&F in repair, power contactors of AC3 upto 210 Amps 3 pole 415 volts all as specified and as directed.

M&L for denting, welding/fixing of hinges, replacement of damaged door (made up of 3.15mm thick steel sheet) of indoor/outdoor panel door of various capacity, preparation of old/new surfaces of panel box and applying two coats of synthetic enamel paint all as specified and as directed.

S&F in replacement, post top lantern, LED type, 20 watt, 230 watt volts, AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including suitable size of GI pipe as per lamp size including connection and testing complete all as specified and as directed.

Taking out old unserviceable oil fired incinator pump and transporting to authorised workshop of Denfoss for repairing and replacement of unserviceable parts such as firing nozzle, control valve, relay and communication wires, control switch , serving/replacement of fuel pump, cleaning of diesel tank and fuel pipes and refixing the same in position and testing commisioning at site all as directed. Note : The cost of spare parts shall deemed to be included in the quoted rate.

Taking down old unserviceable street light fittings from poles of any type/gun shed for repairs and refixing including testing the same in existing position after repair complete all as directed. Note - Parts required shall be measured and paid for separately under respective items.

S&F in replacement, Driver for LED street Light 20 Watt to 50 Watt complete all as specified and as directed.

S&F in replacement, Driver for LED street light 50 Watt to 160 Watt complete all as specified and as directed.

S&F in replacement, bracket for street light, made out of GI pipe, medium grade of suitable size (40 mm dia and 1.2 mtr long), bent to shape, fixed with and including necessary heavy duty clamps of suitable size including painting the clamps with two coats of synthetic enamel paint over a coat of primer all as specified and as directed.

S&F in replacement, LED street light fitting, 60 Watt, 230 V, AC, outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including PVC copper wire 1.5 sqmm of suitable length for connection of street light from Overhead conductor /junction box complete all as specified and as directed

S&F in replacement, LED street light fitting, 70 Watt, 230 V, AC, outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including PVC copper wire 1.5 sqmm of suitable length for connection of street light from Overhead conductor /junction box complete all as specified and as directed

S&F in replacement, LED street light fitting, 90 Watt, 230 V, AC, outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including PVC copper wire 1.5 sqmm of suitable length for connection of street light from Overhead conductor /junction box complete all as specified and as directed

S&F in replacement, LED street light fitting, 120 Watts having pressure die cast housing with IP 66 efficient, protection with heat resistant toughned glass with individual LED lenses complete including making connection with street light box or OH line using PVC insulated and sheathed single core multi stranded alumn conductor cable of size 1.5sqmm complete all as specified and as directed

S&F in replacement, LED flood light fitting, 70 Watts having pressure die cast housing with IP 65 efficient high outout emitter LED for better distribution, protection with heat resistant toughned glass with individual LED lenses complete including making connection with flood light box or OH line using PVC insulated and sheathed single core multi stranded alumn conductor cable of size 1.5 sq mm including MS clamps nuts, bolts and washers of required size complete all as specified and as directed.

S&F in replacement, LED flood light fitting, 100 Watts having pressure die cast housing with IP 65 efficient high outout emitter LED for better distribution, protection with heat resistant toughned glass with individual LED lenses complete including making connection with flood light box or OH line using PVC insulated and sheathed single core multi stranded alumn conductor cable of size 1.5 sq mm including MS clamps nuts, bolts and washers of required size complete all as specified and as directed.

S&F in replacement, LED flood light, 120 watt, 230 V, AC, outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete including PVC copper wire 1.5sqmm of suitable length for connection of street light from overhead conductor /junction box complete all as specified and as directed.

S&F in replacement, LED flood light fitting, 170 Watts having pressure die cast housing with IP 65 efficient high outout emitter LED for better distribution, protection with heat resistant toughned glass with individual LED lenses complete including making connection with flood light box or OH line using PVC insulated and sheathed single core multi stranded alumn conductor cable of size 1.5 sq mm including MS clamps nuts, bolts and washers of required size complete all as specified and as directed.

S&F in replacement, FRP Junction box, light weight, low corrosive, suitable for pole mounting including MCB SP6/10 amps , Box size not less than 250x200x100 mm including necessary connection for loop in and loop out cable connector and suitable size for cable glands complete all as specified and as directed

S&F in repairs, astronomical street light timer switch electronic type with digital display suitable for Indian region longitude/latitude with 24 Hours operation settings including single phase contactor suitable for 10 KW complete with all accessories and prewired suitable for and including panel/pole mouting box made out of 3mm thick CRCA sheet apoxy painted and powder coating single door, outdoor type with mounting arrangements complete all as specified and as directed.

Supply, laying and testing 50Sqmm 3.5 core, XLPE insulated, PVC sheathed, conforming to relevant IS, ISI marked, earthed system, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, in trenches/wall/floor/pole complete and making connection including suitable size aluminium lugs, including taking out existing cable and cable covers all as specified and as directed

All as per serial item No 100 but 35 Sqmm, 3.5 core, XLPE cable.

All as per serial item No 100 but 16 Sqmm, 4 core, XLPE cable.

All as per serial item No 100 but 10 Sqmm, 2 core, XLPE cable.

Supply and laying reinforced factory made precast concrete cable protection covers, class LV, type-2, flat size 250mm x 150mm x 40mm, ISI marked complete all as specified and as directed

S&F 1100 volts grade heavy duty multi stranded aluminium solid conductor cable PVC insulated, served with inner sheathing of PVC tape and overall PVC sheathed in service connection flat/circular cable of sizes 4 Sqmm 2 core laid and jointed in position including taking out existing service cable all as specified and as directed

All as per serial item No 105 but 6 Sqmm, 2 core cable

Disconnecting electric and water supply connection of centrifugal pump of any capacity for repairs such as cleaning, servicing, repair of leakage/ unserviceable parts any type and reconnecting all electric and water supply connections and testing complete all as specified and as directed. Note : Cost of repair, servicing and spare parts shall deemed to be included in the quoted rate.

Taking out old unserviceable submersible sewage pump set from sewage underground sump by means of chain pully and transporting to authorised workshop for repair and rewinding the motor with super enamelled insulated copper wire of existing gauge including insulated packing, liquid compound, differential oil-4.5 ltrs, repalcement of oil seal and motor/pump bearing, replacement/repair of motor and pump shaft made out of high quality Stainless steel and reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running for upto 40HP, 3 phase electric motor all as specified & as directed.

Disconnect the electric supply, dismantle coupling and remove compressor upto 40 HP, shifting to local workshop for repair / servicing, opening up the compressor unit, dismantle and remove damaged twin lobo air compressor, piston, piston connecting rod, rings etc and replace with new one, reconditioning / welding / filling / grinding / lathework to shaft of the compressor unit, supply & replace suitable size bearing of make : SKF - 2Nos, drain out the out dated compressor oil, cleaning the oil chamber thoroughly by removing the sludges from the oil sump, replace with new compressor oil of specified gravity - 4 Litres, supply & replace air filters of suitable size - 2Nos, reassembling with new gasket set, transporting back to the original location, coupling, aligning, supply and replace worn out V - belts ( B-72) of make : Fenner - 3Nos, and reinstalling at sie, connecting, testing & commissioning complete all as specified and as directed.

Taking LT shutdown, dismantling and removing the 10 HP, 3 phase electric motor from existing foundation / position, shifting to authorized workshop for repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor with super enamelled copper wire of the size equivalent to the original winding including insulated packing materials, varnishing, heating, drying etc, replacing the bearings, reassembling the motor, transporting to site of work and reinstalling back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running complete all as specified & as directed.

All as per serial item No 110 but for 7.5 HP, 3 phase electric motor.

All as per serial item No 110 but for 5.5 HP, 3 phase electric motor.

Disconnecting, taking out and transporting to workshop old unserviceable pump of capacity 40 HP for repair/replacement of worn out parts & reassembling after satisfactory completion of repair work (the repair work shall includes replacement of both end pump bearings, gland packing, oil seal, including machining of shaft at lathe machine, greasing complete) transporting back to site of work, reconnecting and testing for smooth running at pump house complete all as specified and directed. Note - Any nut/bolts/ studs and packing required shall deemed to be included in the rates quoted by the contractor.

All as per serial item No 113 but for pump of capacity 25 HP

All as per serial item No 113 but for pump of capacity 15 HP

M&L for scrapping the old painting and removing the grease, oil, dirt etc, filling the cavities of exposed surfaces of pump, motor,sand filter,ladder, gate and pipe line and spray painting with two coats of super enameled anti corrosive paint of approved colour (according to colour code at STP area ), over a coat of primer after taking proper shutdown of LT pannel and restoring of supply after completion of the work all as specified and as directed

M&L for cleaning vegetation/grass and bushes with roots in the water supply installation and STP area, removing the garbage and deposited at distance not exceeding 100m as as directed

M&L for filter media plastic round pieces which is used in fabrication tank to settle down bacteria in it complete all as specified and as directed.

Cleaning, checking and servicing of aerobic tank open well of size 5 mtr dia and 12 mtr depth, disposal of wastage away from STP area and necessary connected works for proper working system complete all as specified and as directed.

Cleaning, checking and servicing of collection sump of size 5 mtr dia and 12 mtr depth, disposal of wastage away from STP area and necessary connected works for proper working system complete all as specified and as directed.

Cleaning, checking and servicing of equilization tank of size 13 mtr dia and 3 mtr height, disposal of wastage away from STP area and necessary connected works for proper working system complete all as specified and as directed.

Cleaning, checking and servicing of chamber and Fab - I tank of size 5 mtr dia and 6 mtr height, disposal of wastage away from STP area and outgoing pipe net and to stop flow of filter media from fabrication tank to tube settler tank complete all as specified and as directed.

Cleaning, checking and servicing of chamber and Fab - II tank of size 5 mtr dia and 6 mtr height, disposal of wastage away from STP area and outgoing pipe net and to stop flow of filter media from fabrication tank to tube settler tank complete all as specified and as directed.

Cleaning, checking and servicing of sludge tank of size 2mtr x 2mtr x 5mtr depth, disposal of wastage away from STP area and outgoing pipe net and necessary connected works for proper working system complete all as specified and as directed.

Cleaning, checking and servicing of sludge sump, tube settler tank and resetelling the tube setter tank of size 6.5mtr dia and 5 mtr height, disposal of wastage away from STP area and outgoing pipe net and necessary connected works for proper working system complete all as specified and as directed.

Cleaning, checking and servicing of Primary, secondary & Filter tank of size 10mtr x 6mtr x 3mtr height, disposal of wastage away from STP area and outgoing pipe net and necessary connected works for proper working system complete all as specified and as directed.

Thorough checking and servicing of pressure sand filter and pressure activated carbon filter complete all as specified and as directed.

S&F in repairs, PVC flexible hose pipe 100 mm bore complete all as specified and as directed.

M&L for removal of blockage and leakage of pipe line, checking and servicing from sludge sump to sludge tank to centrifugal pump set, taking down and refixing of pipe line after clearing the blockage of pipe line in STP area and necessary connected works for proper working system all as specified and as directed.

Repair/servicing of pressure pump any type and capacity complete all as specified and as directed.

S&F in repairs, exide xpress, 200AH battery, 12 volts all as specified and as directed Make : Exide Model FXPO-XP2000 or equivalent model in Amco/Nicco/ Amaron

S&F in repairs, LED security light for buildings with single piece new generation energy saving and environmental friendly long life LED, 35 W made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 and all acessories including one bracket made of light grade GI Pipe 32 mm dia, 1.5 mtr long fixed to wall/ pole with two clamps made out of mild steel flat iron 40 mm x 5 mm and connected to nearest electric supply with and including three core 1.5 sqmm aluminium conductor cable of suitable length complete all as specified and as directed.

S&F in replacement, garden light of bamboo type -IP 65 of capacity 8 watt New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape luminaire for diffused lighting with high power LED as light source with PCC Base for fixing of lights with proper nut & bolts including elect connection wire complete all as specified and as directed Make- Cat part No of Havells BAMBOOBL8WLED757PSYMTOPC or eqivelant to Crompton/Bajaj/Philips/C&S/Surya/Luker/Halonix

S&F in replacement, display board (double sided) of size 1.0m x1.0m x 0.30m made with flex material, mounted on suitable iron frame & printing of installation detail both side of the board, printing detail/ installation detail provided by JE/AGE including fixation of 4x20 Watt LED light inside the board and also arrangement connection wire from the nearest LT panel/pole complete all as specified and as directed

S&F 40 mm bore galvanised steel tubing, light grade, ISI marked, for protection of under ground cable on pole/wall/under road including taking out old unserviceable pipe complete all as specified and as directed

ASHWAMEDH ENGINEERS

SONU ENTERPRISES

SKS Electricals