68/EWC(B)/2023-24

Amount

Carriage of following line materials for 33 KV line from any Store Centre of Bareilly zone, Bareilly to site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site.

ST pole 11 Mtr. Long

PCC Pole 9 mtr. Long

33 KV cross arm

33 KV pin insulator

33 KV pin with nut

M.S. Earthing rod

M.S angle 65x65x6mm, 2700mm

Top channel 125x65x6mm 3200mm

ACSR Dog conductor

11 KV disc insulator B&S type 70 KN

Disc fitting Dog/Racoon 70 KN

Complete Stay set complete

Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All types of clamps nuts & bolts,stone pad, washer would be provided by contractor.

Single support of ST Pole 11mtr long.

Single Line support on PCC Pole 9 mtr. Long

Double pole structure on PCC Pole 09mtr long complete with bracing.

Fabrication of 125x65 mm Top Channel in length of 3.6 Mtr.(including making holes, fixng of all type of insulators, clamps etc) and fixing of top channel on existing Rail double pole at level of PCC pole 9 Mtr. Long for uniform sagging of new dog conductor.

Erection/fixing for stay set with stay wire and clamp as per RESSPO drawing including binding, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and brick ballast and sand before back filling of the pits as per RESSPO schedule all clamps, nuts & bolts, cement, brick, concrete etc would be provided by contractor.

Concreting of supports in 1:4:8 ratio and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor.

Laying and sagging of 3 phase ACSR Dog conductor including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc. in all respect.

Earthing of each S.T Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete the job.

Single Pole of S.T Pole .

Double Pole of Rail Pole

Fixing of danger board, number plate on each location and G.I barbed wire including proper clamping and providing anti climbing device by using including supply of the above items.

Safe dismentling of old & rotten ACSR Weasal & Raccon conductor (including all types of accessories as insulators,fitting etc) of existing 33 KV Jalalabad Rural Line without any damage of all accessories.

Safe dismentling of damage & bend rail double pole along its all accessories (Top Channel, Insulatosrs) of existing 33 KV Jalalabad Rural Line.

Carriage of receive back material (pole and accessories) and old conductor from site to shahjahanpur store.(dist. Upto 30 KM)

Clearing of the line route by cutting of tree branches during erection of line and also upto the time of energisation completely as per direction of Incharge.

SHIV TRADERS

BHARAT ELECTRICAL TRADERS