SMART PERIODICAL SERVICES AND CERTAIN B/R WORK IN T WING, W-WING AND G-WING AREA UNDER AGE B/R-II GE BABINA

Amount

Removal of plant/ treas/ Shrubs from roof tops/ sides, external walls of bldg, chajjas, wall junctions, junctions of rain water pipe/ CI soil/ waste pipe junctions including taking out the roots entered in wall/ slab surfaces and making good the disturbed surfaced using PCC (1:2:4) type B-0 or cement morter (1:2) including repairing the GI/CI/PVC pipe joint which were damaged during cutting/ taking out process to match with the existing and finishing the disturbed surfaces to match with existing including necessary scaffolding/ staging and formwork upto a height of 15.00 m from the ground level complete all as specified.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface.

M&L for one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algai properties in two coats not less than 1.79 litre (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over primed surface with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.

Note for item No. 2 to 5 :- The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :- (a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc after approval by the GE. (b) The Contractor shall upload with the documents under cover I "Memoradum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (d) Removing of Nails, making good holes, cracks etc (e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (h) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

M&L for preparation of old painted surface fo brick, stone, concrete, asbestos sheet or plastered surface of any description over 10cm width or girth and applying one coat of Apex paint exterior grade, complete all as specified and as directed.

M&L for a coat of wall care putty 1mm thick (for internal surface) including prepration of surface complete all as specified and as directed.

M&L for preparation old treated surface of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation old treated surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of surfaces and applying one coat of oil bound distemper with roller on old treated surface of wall etc complete all as specified and directed.

M&L for preparation of surfaces and applying two coat of oil bound distemper with roller on old treated surface of wall etc complete all as specified and directed.

Description same as per item No.11 above but on ceiling in lieu of walls complete all as spedified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer on new surface complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coat of oil bound distemper over a coat of primer on new surface complete all as specified and directed.

M&L Preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L Preparing newly plastered surfaces of Ceiling and applying three coats of white wash complete all as specified and directed.

M&L preparing old decorated plastered or unplastered surfaces of wall, pilasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed. Note: All grass, trees should be removed from the chajjas, and wall during the time of white wash, No extra payment shall be paid to the contracotrs.

M&L for Complete removal of existing treatment on wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over 1mm thick wall putty (for external suface) complete all as specified and directed.

M&L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for prepartion of surface for building Nos & Qtr Nos and applying one coat of senthetic enamel paint and writting letters of figures (Block, Roman, Italic or Indian) n exc. 10 cm height width of letter shall not be less than 15mm including stops, commas,lines, brackets and making outer boarder withapproved tint of synthetic enamel paint complete all as specified and as directed.

M&L for repeairing of RCC projection, Chajjas, columns, beams, Parapet wall etc. by necessary preparation i.e scraping, cutting, chiseling, dusting and cleaning exposed reinforcement surfaces of damaged/loose surface and applying one coat of cement slurry and filling the surface with plain cement concrete (1:1.5:3), reinforced with welded or fixed wire mesh and make good by 15mm thick plaster with cm (1:4) and item including scaffolding/ formwork etc upto triple story height complete all as specified and directed by Engr-In-charge.

M&L for preparation of old GI/ PPGI sheet surface by wire bruss and removing dust on surface and applying one coat of rust resistance primer complete all as specified and directed.

M&L for applying one coat of zinc rich 1P paint on old painted GI/PPGI sheet surfaces by roller / Paint Spray machine complete all as specified and directed.

Demolition of cement concrete (unreinfored) in ground floor and paving n,exc 15cm thickness (below or above ground level) and in any position complete all as specified and as directed.

M&L PCC 1:2:4 type B-0 using 12.5 mm graded store aggregate as in coping, kneelers, bed plates, kerbs etc complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, laid dry, stacking the serviceable stone for re-use and disposal of debris and rubbish to low level area complete all as directed by the Engr-in-Charge.

M&L brick work with fly ash bricks old size straight or curved on plan exc 6.0 M mean radius built in cement mortar 1:6 complete all as specified and as directed. Note : Old clay brick optained from demolition will not be utilised in work.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for 15mm thick rendering in CM (1:6) on brick/solid block masonry wall/ concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L 5mm thick rendering in cement mortar (1:3) on concrete surfaces of ceiling complete all as specified and a directed.

M&L for 75mm thick Cement concrete1:3:6 type C-2 using (40mm graded aggregate) as in floor complete all as specified and a directed.

M&L for 40mm thick Cement concrete 1:2:4 type B-0, (12.5mm graded aggregate) as in floor all as directed and specified.

M&L Cement concrete in foundations/sub base, filling and mass concrete 1:4:8 type D2 (using 40mm graded stone agg) complete all as specified and directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. laid dry or laid dry & pointed complete all as specified and directed.

M&L for Glossy finish Chequered cement concrete tiles 30cm x 30cm x 22-25mm thick approved colour, design & pattern as in footpath, parks, lawns, parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern, set, jointed and pointed in grey cement with color pigments slurry in floors over 15mm CM (1:6) thick screed bedding specified and directed by engr-in-charge.

M&L for Glossy finish 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.complete all as specified and as directed.

M&L for Glossy finish 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:3 mixed with water proofing compound as per manufacturer instructions surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note :- WPC shall be measured and paid seprately)

M&L for applying two coats of spray/brush applied of Smart Care Ultron Liquid membrane of Asian pant Ltd or equivalent as approved by GE in proportions as per manufacturer instruction complete on surfaces floor and wall of sunken portion complete all as specified and directed.

M&L for plain cement concrete 1:5:10 type D-2 (using 40mm graded bricks bats) as in filling & mass concrete in floor and sunken portion complete all as specified and as directed by Engineer -in-charge.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in sub base, floors and pavings etc. complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L non skid ceramic coloured tiles 400x400, 7 to 8 mm thick (square or rectangular ) including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for colour printed glazed ceramic tiles 300x450/300x600 mm x 6-7mm thick as in dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge.

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (Pedastal pattern) 'white (excluding flushing cistern and flush pipe) including connection todrain or out going pipe and to flushing pipe anti syphonage pipe and making good to floor complete all as specified and as directed.

M&L for forming/ cutting openings through out the walls area of opening not exe 0.50 Sqm for fixing of exhaust fan or other openings or enlarging existing openings, etc., including providing, fixing and removing material required for making good complete all as specified and as directed.

Demolition of RCC water storage tank of size exc. 600x1200x1000 mm but n.exc 1200x1600x1500mm on roof, floor, staging complete and the scrap should be removing to distance of 50m where directed by EIC complete all as specified and as directed.

S&F rotational moulded,multilayer HDPE water storage tank of 3Layer white color 500 ltrs capacity (Cylindrical vertical with closed top) fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball (of minium weight 210 gms) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F rotational moulded,multilayer HDPE water storage tank of 3Layer white color 1000 ltrs capacity (Cylindrical vertical with closed top) fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball (of minium weight 210 gms) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repairs Stop Valve 20 mm, cast copper alloy, screwed down high pressure with crutch or butterfly handle etc complete all as specified and directed.

S&F in repairs Stop Valve 25 mm, cast copper alloy, screwed down high pressure with crutch or butterfly handle etc complete all as specified and directed.

Taking up or down existing 15mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted.

Taking up or down existing 20mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted.

Taking up or down existing 25mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted.

S&F in jointing and testing 15mm dia bore galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings complete all as pecified and as directed.

S&F in jointing and testing 20mm dia bore galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings complete all as pecified and as directed.

S&F in jointing and testing 25mm dia bore galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings complete all as pecified and as directed.

S&F in repairs fancy type chromium plated cast copper alloy bib taps long shank & cup 15mm dia bore complete all as specified and as directed

S&F in repairs 15mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup complete all as specified and as directed.

S&F in repairs 15mm dia bore cast copper alloy chromium plated fancy type two way angle cock with long shank & cup complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F in repair cast copper alloy chromium plated jet spray for EWC complete all as specified and as directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. complete all as specified and directed.

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls and taking down old PVC /CI/Concrete pipe complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls and taking down old PVC /CI/Concrete pipe complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm bore complete all as specified and as directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75 mm bore complete all as specified and as directed.

M/S SHARADA ASOCIATE (BID ID -3268710)

M/S ANIL TRADERS (BID ID -3259528)