Providing Street Light Arrangements to Internal Roads in SIPCOT TIDCO Joint Venture Industrial Park, Varapatti

Supply, Erection of 8m Free Standing Single Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm.The pole should be hot dip galvanized confirming to BESN ISO-1461 with thickness of 65 Micron etc., complete complying with standard specification and as directed by SIPCOT Officers. (For Single Collar Poles)

Supply, installation, testing and commision of light 120 W LED street light luminaries complete made of pressuered die casting aluminium having toughened glass in out voltage range of 100-270V Ac and in put frequency range of 47-64 HZ, PF>0.90 lag led should be high power led 1W of NICHIA having not less than 90 lummens / watt and junction temperature arranged in combination of series and parallel connection, power electronics circuits having protection for over current and over temperatre thickness of the fixtures not to exceeding 70 mm weight of fixture not exceeding 8kg etc., complete complying with standard specification and as dircted by SIPCOT Officers

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B for culvert and drain complete complying with standard specification and as directed by SIPCOT Officers. (Narrow cutting)

Supplying and filling in foundation with filling stone dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc., Complete complying with standard specification and as directed by SIPCOT officers.

Providing and laying plain cement concrete mix 1:4:8 (One cement, four M.sand and Eight aggregates) for foundation using 40mm ISS size HBG stone jelly for foundation including cost and conveyance of all materials to site dewatering if found necessary and laid in layers of not more than 15cm thick well rammed consolidated and curing etc., complete complying with Standard specification and as directed by SIPCOT Officers.

Reinforced cement concrete 1:11/2:3 (One Cement, One and Half M.Sand and Three Jelly) for pedestal concrete suing Machine Crushed 20mm size Hard Broken granites ISS stone Jelly for all "Reinforced Cement Concrete Works" including cost and conveyance of all materials and labour to work site excluding cost of centeringm, shuttering, strutting and cost of MS / RTS Reinforcement grills placed in position but including machine mixing concrete, laying, vibrating with mechanical vibrators, finishing, curing, including cost oof soft potaable water treatment of bearing, smooth with cement mortor 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claim for extra and all labour charges for mixing concete, laying, curing, vibrating charges, hire charges for all tools and plants and all other incidental charges etc., complete complying with Standard specification as directed by SIPCOT Officers. ( for Pedestal Concrete)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at above 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton and as directed by SIPCOT Officers

Supplying, fabricating and placing in position steel reinforcement grills using M.S./ R.T.S. rods of all sizes of reinforcement for arr Reinforced Cement Concrete works (for pedestal concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rodsk, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length whereever necessary cover blocks and all other incidental charges etc.,complete complying with standard specification and as directed by SIPCOT Officers.