Providing WBM to the Internal roads of Danapal Nagar in Thengaithittu

Amount

Surface dressing of the ground including removing vegetation and in - equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m -all kinds of soil

Supplying and filling with gravel (excluding rock) in layers not exceeding 20cm in depth , breaking clods , watering , rolling each layer with 1/2 tonne roller , or wooden or steel rammers and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes capacity including all leads and lift (Payment will be made based on level measurement)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth three wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum / gravel for screening and gravel for binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by manual means - Water bound macadam Gr-I with Gravel screening. (As per MoRTH specification, 4th Revision)

Fabrication, supply and fixing of Village / Informatory name board of size 1.06mX0.61mts. The width of the board is tapered at 0.80mts upto 1.06mts. to give the triangular shape at one end with High intensity refelective sheeting of required colour encapsulation on aluminium sheet of not less than 2mm thick suitably supported and framed with 25mm X25mm x3mm AISI 316 grade stainless steel angle and the board frame is supported alround with AISI 316 grade stainless steel pipe of 38.10mm dia (Outer dia X 2mm wall thickness). The Village Names / street Names lettering and symbols will be provided by High Intensity grade white sheeting . The board is supported by Two Nos. of 63.5mm dia post S.S pipes for 2.00mts height with same dia dummy plate arrangement at the top. The board frame and post pipes are welded by Tig welding with necessary polishing etc., and M.S. pipe of 50mm dia for a length of 35cm will be welded at the bottom of the posts and fixed in a ground pit of size 0.45X0.45X0.50mts with P.C.C 1:2:4 Rate including all the materials s.s welding Grinding Polishing fabrication charges, conveyance etc. including Earth work and PCC charges etc. complete.