REPAIR/REPLACEMENT OF SANITARY FITTINGS AND OTHER CONNECTED B/R WORKS AT YOGINDER VIHAR AND 1 CBPO UNDER AGE B/R-I (S) OF GE (SOUTH) DELHI CANTT-10

Amount

S&F brass jumper washer, brass head, face and spindle for bib cock/pillar cock/stop cock 15 mm bore any type complete all as specified and directed by Engineer-in-charge.

S&F in repairs chromium plated bib tap, long body with flange, cast copper alloy fancy type, screwed for 15mm bore iron pipe complete all as specified and directed by Engineer-in-charge. (Make- Prayag /Parko/Kingston)

S&F in repairs Chromium plated Pillar tap cast copper alloy with capstan heads screwed down high pressure screwed to 15 mm bore iron pipe complete all as specified and directed by Engineer-in-charge. (Make- Parko/Prayag/Kingston)

S&F in repairs chromium plated Stop valve/angle valves cast copper alloy, complete all as specified and directed by Engineer-in-charge. (Make- Parko/Prayag/Kingston).

S&F in repairs chromium plated brass overhead shower rose 75mm dia with arm 255mm with flange with swivel joints, any size, including fixing to steel pipe or union for 15mm bore pipe complete all as specified and directed by Engineer-in-charge. (Make- Parko/Prayag/Kingston).

S&F in repairs, brass CP towel rail 60Cm long complete all as specified and directed by Engineer-in-charge. (Make-Prayag /Cera/Parryware).

S&F in repairs brass chromium plated Jet spray for European type WC with 1.0m long pipe as per approved sample complete all as specified and directed by Engineer-in-charge. Make :Prayag /Cera/Jequar.

S&F in repairs PTMT bib tap standard, (Minimum weight 90 gms) any colour, fixed to 15 mm bore iron pipe complete all as specified and directed by Engineer-in-charge. (Make :Prayag or equivalent model of Symet/Polyplast)

S&F in repair PTMT Two way bib cock for health faucet/jet to 15 mm bore iron pipe complete all as specified and directed by Engineer-in-charge. (Make- Prayag cat No-1291(Delta series) or equivalent Symet/polytuff)

S & F in repair small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 15 mm bore pipe (ISI marked) complete all as specified and directed by Engineer-in-charge. (This item will not be measured against item No. 20 here in after).

S & F in repair small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 20 mm bore pipe (ISI marked) complete all as specified and directed by Engineer-in-charge. (This item will not be measured against item No. 21 here in after).

S&F in repairs PVC connection 15 mm dia 45 cm long with 2 Nos check nuts with washer complete all as specified and directed by Engineer-in-charge. (Make Prayag /Polyplast/Symet).

S&F in repairs 32 to 40 mm dia PVC waste pipe for WHB & sink, 60 cm long with union complete all as specified and directed by Engineer-in-charge. (Make :Prayag cat no 327 or equivalent of Poly Plast/Symet).

S&F in replacement CP grating 127 mm dia with/without hole round, fixed on floor / nahani trap, fixed with cement mortar(1:3) complete all as specified and directed by Engineer-in-charge.

S&F in replacement PVC syphone with handle complete for low level flushing cistern complete all as specified and directed by Engineer-in-charge. (Make: Superflush/ISI marked).

S&F in replacement PVC long bend for low level flushing cistern complete all as specified and directed by Engineer-in-charge.

S&F in replacement PVC Polyplast float valve for cistern tank complete all as specified and directed by Engineer-in-charge.

S&F in repairs plastic water closet seat cover for anglo indian water closet white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodised hinging device complete all as specified and directed by Engineer-in-charge. (Make: Prayag /Hindware/Cera

S&F in replacement 10 litres capacity PVC Low level flushing cistern including PVC syphon and float valve with float, PVC long bend for out let connection of cistern with WC complete fixing and connecting bend with WC complete all as specified and directed by Engineer-in-charge. Make:-Prayag,(white/ Ivory) , Parryware, Slimline

S&F in repair 15 mm bore galvanised steel water tubing 'medium grade' with and including all fittings and fixed to walls or laid in floors including raking down old u/s pipe complete all as specified and directed by Engineer-in-charge. (Make : Jindal/Prakash/Tata)

S&F 20 mm bore galvanised steel water tubing 'medium grade' with and including all fittings and fixed to walls or laid in floors complete all as specified and directed by Engineer-in-charge. (Make : Jindal/Prakash/Tata)

S&F in repair white, vitreous china wash hand basin, flat back, size 550x400 mm, excluding taps, waste chain and plug and porcelain stopper but including brackets and 32 mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32MM X 600 MM long PVC waste pipe complete flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-charge. Make:-Cera/Parryware/Hindware

S&F in repair Vitreous China, pedestal pattern wash down water closet pan, white including fixing bolts, connection to flushing cistern and flush pip & drain pipe (or out goingpipe) and to flushing pipe, anti-syphonage pipe, etc complete all as specified and directed by Engineer-in-charge.

S&F in replacement 500 litres capacity rotational moulded polyethylene water storage tank 'ISI Marked' cylindrical vertical with closed top hoisted and fixed in position icluding complete all as specified and directed by Engineer-in-charge. Make:- Polywell/Sintex/Rotex.

S&F in repairs HDPE PVC lid (cover) for 300 to 1000 Litres capacity PVC tanks, complete all as specified and directed by Engineer-in-charge.

S&F in repair 100mm size of butt hinges, medium weight cold rolled mild steel complete for door etc, with welding to steel chowkhats, at any floor up to four storied bldgs and making it functional, in repairs complete all as specified and directed by Engineer-in-charge.

S&F in repair steel window handles(right & left) and peg stays etc as per sample complete all as specified and directed by Engineer-in-charge.

S&F in repairs 150 mm aluminium anodised handle cast type, complete all as specified and directed by Engineer-in-charge.

S&F in repairs 150 mm tower bolt, aluminium anodised complete all as specified and directed by Engineer-in-charge.

S&F in repairs two legged aluminium floor door stopper with rubber shoe complete all as specified and directed by Engineer-in-charge.

S&F in repair 100 mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-charge.

S&F in repairs 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each pane incl taking down old broken glass complete all as specified and directed by Engineer-in-charge.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia or wire and Sqm average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/steel windows complete all as specified and directed by Engineer-in-charge.

S&F in repair, 25 mm bore mild steel 0.8mm thick conduit pipe with PVC ribbed lamination of required length for curtain rods including two fixing mild steel powder coated matching colour full round or half round with fixing nuts (bracket holders),& PVC golden finish end knobs(Two number for each curtain rod of any length) and PVC gold finish curtain ring @ 3 nos/feet complete all as specified and directed by Engineer-in-charge.

S&F non-skid coloured ceramic tiles 300 mm x 300 mm x 6 to7mm thick in floor etc, set and jointed in neat cement slurry and pointed in white cement over and including 15 mm thick screed bed in cement mortar 1: 6 including dismantling old tiling including cement mortar bedding (but not backing) of any description and thickness and removal of rubbish off the premises complete all as specified and directed by Engineer-in-charge.

S&F non-skid coloured ceramic tiles 400 mm x 400 mm x 6 to7mm thick in floor etc, set and jointed in neat cement slurry and pointed in white cement over and including 15 mm thick screed bed in cement mortar 1: 6 including dismantling old tiling including cement mortar bedding (but not backing) of any description and thickness and removal of rubbish off the premises complete all as specified and directed by Engineer-in-charge.

S&F coloured glazed ceramic tiles of size 200mm x 300mm x 6 mm thick, on vertical surfaces such as dados etc, set and jointed in neat cement slurry and pointed in white cement over and incl 10 mm thick rendering in cement mortar 1:4 including dismantling old tiling including cement mortar bedding (but not backing) of any description and thickness and removal of rubbish off the premises complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster on brick/concrete surfaces including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-charge.

M&L for 15 mm thick cement mortar plaster on brick or concrete surfaces in CM 1:4 finished even and smooth surface wihtout using extra cement on ext wall of up to four stories bldgs complete all as specified and directed by Engineer-in-charge.

M&L for 15 mm thick plaster in CM (1:6 ) on concrete / brick walls finished even and smooth without using extra cement , in patches complete all as specified and directed by Engineer-in-charge.

M&L for 10 mm thick rendering in CM (1:3) on ceiling finished even & fair without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surfaces of wall applying three coats of white wash complete all as specified and directed by Engineer-in-charge.

M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including a coat of wall care putty complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surfaces of wall applying two coats of cement base paint white or tinted over a coat of primer complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surfaces of ceiling applying three coats of white wash complete all as specified and directed by Engineer-in-charge.

Taking down cast iron pipes including fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings/pipes laid in trenches,floors or fixed to walls all as directed including earth work, demolition of PCC / Brick work complete all as specified and directed by Engineer-in-charge. for the following sizes of pipes:-

100 mm bore of pipe.

75 mm bore of pipe.

S&F cast iron sand soil waste or vent pipes (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed including making good to match with existing surfaces complete all as specified and directed by Engineer-in-charge for the following sizes of pipes:-

100 mm bore of pipe.

75 mm bore of pipe.

S&F in repairs, cast iron branch pieces (ISI Marked), single (equal or unequal) ordinary of inverted spigot or socket type complete all as specified and directed by Engineer-in-charge for the following sizes of pipes:-

100 mm bore of pipe.

75 mm bore of pipe.

S&F in repair, cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-charge for the following sizes of pipes:-

100 mm bore of pipe.

75 mm bore of pipe.

M&L in repairs 75 mm out let dia CI floor trap incl jointing to waste pipe in run lead complete all as specified and directed by Engineer-in-charge.

M&L in repairs 100 mm out let dia CI floor trap incl jointing to waste pipe in run lead complete all as specified and directed by Engineer-in-charge.

S&F in repairs PVC(SWR) pipes 110mm bore size single socketed, in any length with rubber ring joints, fixed to wall with and including MS flat iron clamp 25x 3 mm complete including taking down old rain water pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs PVC(SWR) bends any radius, of 110mm bore size complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC(SWR) bends any radius,with threaded type door eye of 110mm bore size complete all as specified and directed by Engineer-in-Charge.

M&L for cutting trees including cutting of trunks and branches and digging out roots from floor or roof and walls making good the dismantled portion in cement mortar (1:3) girth of trees 30 cm, complete all as specified and directed by Engineer-in-charge.

M&L for repair of joints of floor trap to make leak proof from joint by applying cement with sealent chemical or by M-seal by removing false ceiling and refixing same in positing after rectification of same including necessary scaffolding complete all as specified and directed by Engineer-in-charge.

Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for exceeding 250 litres but not exceeding 500 Litres capacity of tanks complete all as specified and directed by Engineer-in-charge.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

Chaudhary Constructions

H S KALSI AND BROS

SABHARWAL CONSTRUCTION CO.

Vipul Construction

M/S Davinder Kumar

S.R. Constructions