Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹36.9 LAccepted-AOC | L-1 | Accepted-AOC Accepted | |
| 2 | L-2₹37.3 L+₹39,565 (1.07%)Rejected-Finance | L-2 | Rejected-Finance High Rates | |
| 3 | L-3₹37.4 L+₹49,925 (1.35%)Rejected-Finance 148 SANGHI STREET MHOW MP 453441 | MHOW | INDORE | MP | 453441 | L-3 | Rejected-Finance High Rates | |
| 4 | L-4₹39.6 L+₹2.7 L (7.38%)Rejected-Finance | L-4 | Rejected-Finance High Rates | |
| 5 | L-5₹39.7 L+₹2.8 L (7.61%)Rejected-Finance | L-5 | Rejected-Finance High Rates |
Tender Value
₹43.1 L
EMD Value
₹86,240
Closing Date
2 Mar 2023, 6:00 pmClosed
GE (MCTE) Mhow
GE (MCTE) Mhow (MP) 453441
SPL REPAIR TO PATH AND OTHER CONNECTED ITEM AROUND HQ MCTE TECH AREA AND PROVN OF PARKING SHED NEAR BLDG NO. SM-103 AND THIMMAYA LINE AND RECREATION COURT AND FENCING NEAR CHILDREN PARK OFFRS MD ACCN UNDER GE (MCTE) MHOW
2023_MES_580189_1
GE(MCTE)/MHOW/60(T) OF 2022-23
Open Tender
Civil Works
Works
180 days
GE (MCTE) Mhow
As Per Tender Document
9 documents required · 9 mandatory
₹500
Yes
GE (MCTE) Mhow
₹86,240
Yes
28 Mar 2023
10 Feb 2023
4 Mar 2023
10 Feb 2023
2 Mar 2023
24 Feb 2023
Amount
Item No.1 Demolition of cement concrete (unreinforced) in ground floor and in pavings not exceeding 15 cm thickness ( below or above ground level), complete all as specified and directed.
Item No.2 Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Hard/Dense soil, complete all as specified and directed.
Item No.3 M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed.
Item No.4 M&L for cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregate) as in coping,complete all as specified and directed.
Item No.5 M&L for Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in floors, foundations, filling & mass concrete, complete all as specified and directed.
Item No.6 S&F,60mm thick M-35 grade machine pressed precast concrete interlocking paver blocks of any shape & size confirming to IS 15658-2006, jointing with grey cement & pigment, (design, pattern & colour as approved by Engr-In-Charge), laid over and including 50mm thick sand cushioning, complete all as specified and directed.
Item No.7 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
Item No.8 Supply and fix/lay 300mm bore Reinforced concrete pipe, class NP-2, laid and jointed complete with collars, including testing, complete all as specified and as directed.
Item No.9 Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description in any position not otherwise specifically provided for and removing demolished materials to a distance exceeding 250 Mtr complete all as specified and directed.
Item No.10 M&L mild steel TMT reinforcement bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified .
Item No.11 Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.
Item No.12 M&L for Fly Ash bricks (modular size) straight or curved on plan exc. 6m mean radius, in CM 1:4, complete all as specified and directed.
Item No.13 M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surfaces even & smooth without using extra cement, complete all as specified and directed.
Item No.14 Preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of chalk whiting, complete all as specified
Item No.15 S&F in repair retro reflective sign board out of ACP sheet of 4 mm thick, back ground should be any colour and writing materials should be in white or any colour as approved ,including lettering of any size, colour and numbers as approved including welding or reveting with frame etc,complete all as specified and directed.
Item No.16 S & Fixed in repair stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and as directed.
Item No.17 Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil, including watering, and removing surplus soil to a distance n exc 50m and making good surface, complete all as specified and directed.
Item No.18 M&L for PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, filling in column footing etc, complete all as specified and directed.
Item No.19 S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS, complete all as specified and directed.
Item No.20 M&L for Preparation of new iron and steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
Item No.21 S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.50mm thick, of any colour (as approved by the Engr-in-Charge), having tensile strength of 550 MPa, as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Item No.22 Excavating over areas, not exceeding 1.5 m deep and getting out Soft / loose soil, complete all as specified and directed.
Item No.23 M&L for Hardcore of broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.
Item No.24 M&L for 50mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floors, with using extra cement , complete all as specified and directed.
Item No.25 M&L for 28mm wide glass dividing strips, 3mm thick , inserted in position, conforming to design, complete all as specified and directed.
Item No.26 Removal of excavated material (soil) to a distance not exc. 50m & depositing where direceted at a level not exc.1.50m above the starting point, complete all as specified & directed.
Item No.27 Supply only Chain link MS galvanisd fencing, any size or type
Item No.28 Fixing only chain link fencing including line wires, any mesh, size and type, to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed.
Item No.29 S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, wind ties, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as directed.
Item No.30 M&L mild steel round bar reinforcement bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Item No. 31 S&F, mild steel screw bolts (machine made) with hexagonal or square head one end & screwed the other or screwed both ends, each screwed end to be fitted with washers & hexagonal or square nut, not exc 6cm long & dia of neck 10 to 15mm, complete all as specified and directed.
Item No.32 S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet, 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self-tapping screw complete all as specified and directed.
Item No.33 M&L for reinforced pre-cast cement concrete (1:2:4) type B1 with using 20mm graded aggregate, set in CM (1:4) at landing, cover slabs over drain, manhole etc. with plain faces, complete all as specified and directed.
AGARWAL BUILDERS
M/S Ashish Construction
M/s Shree Ganesh Traders
Robin Associates
sunway associates
ms shrilaxminarayan and sons
Bharadwaj Builders
Jamna Constructions
M/S UnitedConstruction
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .