IMPROVEMENT TO BLDG NO.176 AT 26ED AFUNDER GE (AF)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing sericeable tiles to store and rubbish off the premises.

M&L Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4.

M&L PCC 25 mm thick (1:2:4) Type-B-1 (using 12.5 mm graded crushed stone aggregate) as in level course to receive to floor tiles complete all as specified and directed.

M&L Double charged Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&LGranite20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessarystainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

S&F Steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I.S.1611-1998 grade st-240 including painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor's workshop before fabrication.

M&L painting to steel and iron surface applying 2 coats of sythetic enmal paint over 1 coat of primer including peparation of surface.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified(Note: The sheet shall be cut into any shape & size as required on site)

Taking down chowkhats or frames with shutters exceeding 1.5 Sq.m and not exc. 4 Sq. m Each (without taking off shutters from the frames) complete all as specified and as directed.

S & F 30 mm thick Factory made Flush shutters, solid core construction, with block board core and plywood face panels, decorative faces on both sides veneered with lipping / frame to match complete all as specified and as directed .

Supply and fixing 150mm long extruded alluminium alloy handle, cast type, anodized all as specified.

Supply and fixing 100 mm long butt hinges, extruded aluminiun alloy with galvanised mild steel himges, anodised and fixed.

Supply and fixing 100 mm long aluminium, anodized barrel tower bolts of extruded section all as specified.

Supply and fixing 150mm long extruded alluminium alloy handle, cast type, anodized all as specified.

Supply and fixing 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified.

Taking down cement plaster on brick/stone wall and ceiling including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

M&L two coat of oil bound distemper over one coat of primer on ceilig including prepration of surfaces.

M & L for rendering 10 mm thick in cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L two coat of oil bound distemper over one coat of primer on wall including prepration of surfaces.incl 2 mm thick wall care putty.

S & F Providing & Fixing of Knauf Fibre Glass Acoustical Suspended Ceiling System with 20/15 mm thick Optra Microlook 90 Edge Tiles with KnaufCustom Silhouette 15mm face exposed Black reveal grid to accommodate the techzone layout as per approved layout. The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95%, NRC 0.85– 0.95(Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, , Light Reflectance ≥88% as per ASTM E-1477, Colour Pebble White, Fire Performance of Class 0/1 as per BS 476 Part 6/7 with 20/25mm Square Tegular/Microlook 90˚ edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 85%. complete all as specified ®all as specified and directed.

S&F powder coated Aluminium section for door shutters aluminium section weighing not less than 0.88 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminium shap beading screws etx complete all as specified.

S&F in repairs 18 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work all as specified and as directed.

Supply only 4.8 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane.

Excavcation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface.

M & L PCC 75 mm thick 1:3:6 type C2 40 mm graded aggregate as in sub base for flooring for auditorium seating complete all as specified and directed.

M&L PCC 25 mm thick (1:2:4) Type-B-1 (using 20 mm graded crushed stone aggregate) as in level course to receive to floor tiles complete all as specified and directed.

M&L for 20mm thk cement screed basd oe bedding layer of mortar 1:4 and pointed in white or coloured cement to match for laying floor finishedall as specified

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm or 30cmx30cmx25 mm thick, set, jointed and pointed in neat cement slurry in floors

M&L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.

M&L for removing existing alu partition including glass and Plywood and refixing in position as shown by the engg-In-Charge without any damage of glass, plywood and alu sections complete all as specified and directed.

S & F Providing and FixingArmstrong Channelled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 21mm of visible pane. The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven Soundtex acoustical fleece hot pressed to achieve NRC of 0.5. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm.The panels shall be mounted on special aluminium splines (keel) using inside clips provided by Armstrong and approved by the Architect/ Engineer-in-Charge

M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the following:- (a) One light point /Fan point controlled by one switch.

(b) One 5 Amps socket point on independent board.

S & F Modular socket 06 Amps 2/3 pin combined 2 module complete all as specified & directed.

M & L point wiring with 2.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete

Supply and fixing wall fan of single phase 230/240V of size 400 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable complete all as specified and directed .

Supply and fix Switch modular type 16A modular type single pole and one way 230 volts 16 Amps all as specified

Supply and fix Socket out let 3/5 Pin, 15 /16A modular type single pole and one way 230 volts 16 Amps all as specified

S&F modular White cover plate with frame 3 module complete all as specified & directed

S&F modular metal flush box 3 module complete all as specified and directed.

S&F modular White cover plate with frame 12 module complete all as specified & directed

S&F modular metal flush box 12 module complete all as specified and directed.

S&F modular White cover plate with frame 6 module complete all as specified & directed

S&F modular metal flush box 6 module complete all as specified and directed.

Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed

Supply and fixing Acrylic Rectangular LED Fire Exit sign display board for safety, 3w single side display with 2 hours battery back up complete as specified and as directed Make Bajaj or equivalent to the makes specified in list of manufacturer here in after.

Supply and fixing Floor POP up box with power socket complete as specified and as directed

S & F MCB SPN 32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.

S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.

S & F MCB DB SPN 8 Way with 200 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed.