REPAIRS/MAINT OF SANITARY FITTINGS, PLUMBING AND FLOORS OF WASHROOM AND ALLIED WORK, REPAIRS/ MAINT OF PLINTHS INCLUDING ATT AND ALLIED WORKS, REPAIR/MAINT INCLUDING REPLACEMENT OF DAMAGED SHEETS/GI ROOF SHEETS, REPAIRS TO FLOORING, SUNKEN AND ALLIED

Amount

Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall /ceiling in concealed position including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F steel water tubing and connection medium grade 15mm bore with all fitting fixed to wall or in ceiling with and including 'J' hook, complete all as specified and directed..

S&F steel water tubing and connection, medium grade, 15mm bore with all fitting fixed concealed to wall or in ceiling complete and making good surfaces with CM (1:3), complete all as specified and directed.

Re-fixing old steel tubing and connection, 15mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)

Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F steel water tubing and connection, medium grade, 20mm bore with all fitting fixed to wall or in ceiling with and including 'J' hook, complete all as specified and directed.

Re-fixing old steel tubing and connection 20mm bore in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)

S&F in repair 15mm bore, fancy type, chromium plated, stop valves,concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair 15mm bore angular stop cock, chromium plated, cast copper alloy, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair CP pillar tap, 15mm bore, capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.

S&F in repairs of 15mm bore bib taps, cast copper alloy with chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule, compelete all as specified and directed.

S&F in repair swivel shower rose 125mm size, brass, chromium plated, with long head arm for fixing with 15mm bore pipe, complete all as specified and directed.

S&F in repairs for 15mm dia pipe, health faucet (ABS Body) mild steel chromium plated suitable with 1.25 metre long flexible tube and ABS wall hook including makeing connection and fixed in position, complete all as specified and directed.

S&F vitreous china ware wash hand basin white, flat back, size 550 x 400mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand including pedestal, complete all as specified.

S&F in repair of 32mm bore PVC solid waste pipe for wash hand basin and urinal etc. 800mm long, complete all as specified and directed.

S&F in repair of 40mm bore PVC solid waste pipe for wash hand basin and urinal etc. 800mm long, complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore, complete all as specified and directed.

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let, ball valve, float and handle, complete all as specified and directed.

S & F in repair 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed.

S&F in repair brass CP tubular towel rail, 20mm dia, D type, 60cm long between flanges, compelete all as specified and directed.

S&F in repair CP toilet paper holder with cover, box type, white, fixed with CP screws, complete all as specified and directed.

S &F in repair corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 25cm side with chromium plate bracket guard, complete all as specified and directed.

S &F in repair corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm side with chromium plate bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repairs CP grating 100mm dia with or without waste hole, fixed to floor trap etc., complete all as specified and directed.

S&F in repair waste fittings 32mm bore, brass, chromium plated for wash basins/sink etc with long screwed shanks and fly nuts, flange and bed deal in red lead cement and other end, complete all as specified and directed.

S&F in repair vitreous china squatting pan ,"Orissa pattern" white, size 580x 440 mm with integral foot rest, 'P' or 'S' trap, including connection to trap, and to flushing pipe, CI anti -syphonage pipe, complete all as specified and directed.

S&F in repair vitreous china EWC (padestal pattern) white including plastic seat and cover of same colour, closed pattern with flat bottom and MS chromium plated hinge device, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old water tank, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old water tank, complete all as specified and directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (wight not less than 210 gm), complete all as specified and directed.

S&F in repair tank cover suitable for any type of rotational moulded polyethylene water storage tanks, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including dismantling of old CGI sheet of any thickness, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including dismantling of old PGI sheet of any thickness, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161 1979 grade St.-240, complete all as specified and directed.

M&L for PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as copping, benching and similar works including weathering slightly rounded on chamfered angle and throating, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position, disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and directed. (Note:- Reinforcement shall be cut as required to facilitate demolition.)

Demolition of un-reinforced cement concrete in ground floors and pavings n. exc. 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for 75mm thick PCC (1:2:4) type C2 (using 40mm graded crushed stone aggregate) as in sub base, floors and pavings etc, complete all as specified and directed.

M&L for sand filling under floor or as in bedding for laying tiles etc including watering and consolidation, complete all as specified and directed. (Note : Consolidated thickness shall be measured for payment)

M&L for 60mm thick machine pressed precast concrete interlocking paver block coloured with grey cement pigment of any shape and size confirming to IS 15658-2006, M-35 grade laid over sand cushining, complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.

M&L for preparation new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality), over a coat of red oxide primer, complete all as specified and directed.

Cleaning the surfaces of brick/RCC using wire brush, brooming down and washing down with water to remove dust etc. and brushing with neat cement slurry @0.5 kg/sqm with acrylic based polymer modified cementitous composite (pidifine 2K) @ 0.50 kg/sqm, complete all as specified and directed.

M&L for uprooting of tree complete including repairing with plain cement concrete (1:1.5:3) type A-0 (using 12.5mm graded crushed stone aggregate), mixed with water proofing compound as per manufaturer's instructions, any girth, complete all as specified and directed.

Cleaning/uprooting of vegetation/small trees, muds, garbages, waste etc growth on inaccessible RCC roof, AC sheet roof, below wind tie, cleaning of AC sheet/CGI sheet, valley gutter and shaft portion of wall surfaces, back side of toilet portion, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100m and disposal unserviceable materials debris and rubbish to a distance n.exc 100m, complete all as specified and directed.

M&L for fly ash brick work, old size, straight or curved on plan exc 6 mtr mean radius built in CM (1:6), complete all as specified and directed.

M &L for PCC (1:5:10) type E2 (using 40mm graded crushed stone aggregate) as in sunken portion, complete all as specified and directed.

M &L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in sunken portion, complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

M&L 15mm thick rendering in CM (1: 6) on fair faces of brick work or concrete surfaces finished surfaces fair and even, complete all as specified and directed.

M & L for rendering 15mm thick (10mm + 5mm) in two coats on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with integral water proofing compound at top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item as 'supply only'.)

M&L for rendering 5mm thick in CM (1:3) on ceiling surfaces, finished even and smooth (without using extra cement), complete all as specified and directed.

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces as in sunken portion in CM (1:3) using water proofing compound as per manufacturer's instructions, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item as 'supply only'.)

Dismantling 75/100/110mm of cast iron or reinforced concrete or PVC pipes for rain water, drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and directed.

S & F 110mm bore PVC SWR pipe, single socketed, in any length with rubber ring joint, fixed to wall with and including clamps, complete all as specified and directed.

Fixing only 110mm bore PVC SWR pipe, in any length with rubber ring joint, fixed to wall with and including clamps, complete all as specified and directed. (Note : Serviceable pipes obtained from dismantling shall be re-used)

S & F 75mm bore PVC SWR pipe, in any length with rubber ring joint, fixed to wall with and including clamps, complete all as specified and directed.

Fixing only 75mm bore PVC SWR pipe, in any length with rubber ring joint, fixed to wall with and including clamps, complete all as specified and directed. (Note : Serviceable pipes obtained from dismantling shall be re-used)

S&F of 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 50mm bore unplasticised PVC pipes of pressure rating 10 kgf/Sqcm fixed concealed complete to walls, ceilings or in floors etc with necessary fittings including cutting chases and making good surfaces with CM (1:3), complete all as specified and directed

S&F 50mm bore unplasticised PVC pipes of pressure rating 10 kgf/Sqcm, fixed to walls, ceilings or in floors etc. with necessary fittings, complete all as specified and directed

M&L 75mm thick PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n. exc. 2 Sqm each) and finished even and smooth without using extra cement and providing joints troughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed.

M&L post construction antitermite treatment by injecting chemical of anti termite treatment along with external wall below concrete or machinery apron/floor using chemical emulsion @ 2.25 ltr/RM including drilling and plugging holes etc, complete all as specified and directed.

M&L post construction antitermite treatment of soil under existing floor using emulsion @ 1.00 ltr/hole, 300mm dia apart including drilling and plugging 12mm dia holes with CM (1:2) to match with the existing floor, complete all as specified and directed.

M&L for post construction antitermite treatment at point of contact of wood work by chemical emulsion (in oil or kerosene bases solution) @ 0.50ltr/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed.

Taking down carefully point wiring of any type, size and description from hard/ teak wood batten/through pipes/casing capping (light, fan, sockets and socket outlets etc) including removal of battens, pipes, plug sockets, socket outlets, switches, shades, ceiling roses, light fittings etc. complete and making good the disturbed surface to match with existing, complete all as specified and directed.

M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLSH type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade ISI marked including all conduit accessories on concealed wiring including concealed pressed steel terminal box of required size factory made with top cover of ISI Marked plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLSH type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 82.00 here-in before but one 3 pin 5 Amps socket point on the same board controlled by other swtich, complete all as specified and directed.

All as per item No 82.00 here-in before but one 3 pin 5 Amps socket point on independent board, complete all as specified and directed.

All as per ser item No. 82.00 here in above but for one 16 Amp 3/5 pin switch socket outlet independent point including PVC cable 4 Sqmm FRLSH type copper stranded conductor along with 4 Sqmm continious PVC insulated unsheathed standard copper conductor cable FRLSH type for as earth wire, complete all as specified and directed.

M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLSH) size 1.5 sqmm drawn in and including PVC casing and caping with fixing accessories, to be fixed on wooden gutties or plastic rawal plug, for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet / modular plate incl continous earth wire of PVC insulated unsheathed, FRLSH multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 86.00 here-in before but one 3 pin 5 Amps socket point on the same board controlled by other swtich, complete all as specified and directed.

All as per item No 86.00 here-in before but one 3 pin 5 Amps socket point on independent board, complete all as specified and directed.

All as per ser item No. 86.00 here in above but for one 16 Amp 3/5 pin switch socket outlet independent point including PVC cable 4 Sqmm FRLSH type copper stranded conductor along with 4 Sqmm continious PVC insulated unsheathed standard copper conductor cable FRLSH type for as earth wire, complete all as specified and directed.

S&F switch piano flush button single pole one way 6 amps 240 volts, complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 6 Amp flush type, complete all as specified and directed.

S&F switch and socket combination 2 in 1, 3 pin 6Amp flush type, complete all as specified and directed.

S&F switch and socket combination 3 pin, 16 Amp, flush type, complete all as specified and directed.

S&F ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete all as specified and directed.

S&F lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type AC 230 volt suitable for any type of ceiling fan all as specified and directed.

Supply and draw sub main wiring in repairs of two run 4.0 Sqmm single core PVC insulated, unsheathed multistranded copper conductor cable 1100 Volt grade, drawn through and including PVC conduit medium duty and accessories of not less than 25mm size ISI marked including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of 4.0 Sqmm single core PVC insulated unsheathed copper earth continuity including making good disturbed surface including taking down existing sub-main wiring, any numbers of wire and any size, complete all as specified and directed. (Note: Two runs of single core cable with one run of earth continuity conductor including PVC conduit & accessories shall be measured and paid as one length.)

All as per item No 97.00 here-in before but drawn through PVC casing/caping, complete all as specified and directed.

S&F in repair exhaust fan made of sturdy engineering plastic complete with louvers shutter, 230 V, 50 Hz, RPM 1200, copper winding of sweep 250mm and making good to the disturbed surfaces including taking down old unserviceable exhaust fan of any sweep and removing to AGE E/M store yard, complete all as specified and directed.

S&F in repair sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 4 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S&F in repair sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 8 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S&F in repair sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 12 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S&F in repair sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Triple Pole & Neutral (TPN), suitable for 4 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S&F MCB Triple Pole and Neutral (TPN) of capacity 65 to 70 Amps, 415 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

S&F MCB Single Pole and Neutral (SPN) of capacity 50 to 63 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

S&F MCB Single Pole (SP) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 1 0 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

Cutting chases, pinning in, making good to facings in stone concrete wall / blocks / slab where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting exc 10cm but n.exc 20cm girth, complete all as specified and directed.

S & F LED decorative wall mounted light fitting made out of champagne good finish fixture with plastic body suitable for 9 W LED lamp B22 base warm white colour (4000K) including LED lamp including taking down old unserviceable light fittings, complete all as specified and directed.

S & F LED bulb 12 watt B22 base, complete all as specified and directed.

S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size including taking down old unserviceable light fittings, complete all as specified and directed.

S & F wall mounted LED light fitting 1 x 20 Watt, 4 feet long, 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old unserviceable light fittings, complete all as specified and directed.

Note: An amount of Rs.62,713.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S BISHAL ENTERPRISES

BHARAT ELECTRIC

M/S SARDAR MAL NAHATA

CONSTRUCTION SHELTER

M/S. KUMAR CONSTRUCTION CO.

M/S BIJAY KUMAR SHIVA