8798/GWL/E8 REPAIR TO VARIOUS ARTICLES OF WOODEN FURNITURE INCLUDING POLISHING/ PAINTING UNDER GE GWALIOR

Amount

TABLE BED SIDE : FD-28, FD- 210, FD- 248, FD-276 Dismantle, take out carefully & replace old components of table bed side. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of old existing broken table top of any description with S&F new table top of 18/19 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4 mm thick teakwood beading.

Replacement of side of table bed side with S&F new sides with 12 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4 mm thick teakwood beading.

Replacement of shelf & bottom with S&F 12 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4 mm thick beading.

Replacement of back ply of table bed side with S&F new back ply with 6 mm thick commercial ply wood.

Polishing one coat to old and two coats to old new surfaces to table bed side with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

PEG TABLE : FD-25(M), FD-236, FD-277, FD-384 Dismantle, take out carefully & replace old components of peg table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of old existing broken top of peg table of any description with S&F new top of peg table with Top 18/19 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4 mm thick teak wood beading all around made to shape, fixed in position.

Replacement of leg with S&F new teak wood leg made to shape.

Replacement of long rail with S&F new teak wood long rails made to shape.

Replacement of short rails with S&F new teak wood short rails made to shape.

S & F new hard PVC/rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg. complete all as specified and directed.

Polishing one coat to old and two coats to old new surfaces to peg table with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

TABLE CENTER : FD-29(M), FD-235, FD-274 Dismantle, take out carefully & replace old components of table center. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of old existing broken top of table center of any description with S&F new top of 18/19 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE and including 4 mm thick teak wood beading alround, made to shape, fixed in position.

Replacement of leg with S&F new teak wood leg made to shape.

Replacement of long rail with S&F new teak wood long rails made to shape.

Replacement of short rails with S&F new teak wood short rails made to shape.

Replacement of stiffener with S&F new teak wood stiffener made to shape.

S & F new hard PVC/rubber shoe/ ring of superior quality with suitable screws for fixing.

Polishing one coat to old and two coats to old new surfaces to table center with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

TEAPOY : FD-34(M), FD-232, FD-278, FD-382 Dismantle, take out carefully & replace old components of teapoy. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of old existing broken top of teapoy of any description with S&F new top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE and including 4mm thick teak wood beading alround, made to shape, fixed in position.

Replacement of leg with S&F new teak wood leg made to shape.

Replacement of long rail with S&F new teak wood long rails made to shape.

Replacement of short rails with S&F new teak wood short rails made to shape.

Replacement of stiffener with S&F new teak wood stiffener made to shape.

S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing

Polishing one coat to old and two coats to old new surfaces to teapoy with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

TABLE DRESSING GENTS : FD-31(M), FD-230, FD-379 Dismantle, take out carefully & replace old components of table dressing gents Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of old existing broken top of table dressing gents of any description with S&F new top of 12 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with and including 3mm thick teak wood beading alround made to shape, fixed in position.

Replacement of side with S&F new side of 12mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE including 3mm thick teak wood beading alround, made to shape, fixed in position.

Replacement of bottom with S&F new 12mm thick ply, teak veneered on one side and commercial on other side grade I (BWR Resin) made to shape fixed in position.

Replacement of drawer with S&F new drawer made to shape fixed in position.

Replacement of back frame with S&F new back frame with 6mm thick commercial ply grade I BWR grade made to shape fixed in position.

Replacement of knob with S&F new chromium plated knob 25mm dia, 24mm length as approved by the Engineer-in-Charge of best quality.

Replacement of mirror with S&F new mirror of size 380mm x 760mm x 5.5mm thick made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge

Polishing one coat to old and two coats to old new surfaces to table dressing gents with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

TABLE DRESSING LADIES WITH MIRROR : FD-32, FD-251 Dismantle, take out carefully & replace old components of table dressing ladies. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of knob with S&F new chromium plated knob 25mm dia, 24mm length as approved by the Engineer-in-Charge of best quality.

Replacement of legs of table dressing ladies with S&F new legs of Ist class HW(MP teak wood).

M & L for replacement of U/S 6mm thick back ply wood of mirror.

M & L for replacement of U/S stiffener between legs.

Replacement of broken top of table dressing ladies of any description with S&F new top table dressing ladies of 18 mm thick pre-laminated particle board exterior grade, BWP (Natural teak wood shade), made to shape, fixed in position

Replacement of side of table dressing ladies with S&F new side of table dressing ladies with teak wood veneered one side & commercial on other side.

Replacement of bottom commercial ply with teak (veneered one side) commercial other side) with S&F new bottom commercial ply with teak veneered one side (commercial other side).

Replacement of drawer of table dressing ladies with S&F new drawer as per Drg

Replacement of side long rail jointed to leg of table dressing ladies with S&F new side long rail jointed to leg of Ist class HW (MP teak wood).

Replacement of short rail of table dressing ladies with S&F new short rail of Ist class HW (MP teak wood).

Replacement of back of table dressing ladies with S&F new back of table dressing ladies with teak wood veneered one side & commercial on other side.

Removing old broken/ U/S sliding glass from table dressing ladies and S & F new 5.5mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed.

Removing of old U/S looking mirror from table dressing ladies and S & F new looking mirror of size 1220 x 366 x 5.5mm thick made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge

Polishing one coat to old and two coats to old new surfaces to table dressing ladies with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

TABLE DINING FOR 6/4 PERSONS : FD/MAP-II/03 Dismantle, take out carefully & replace old components of table dining. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of old existing broken top of table dining 6 persons of any description with S&F new top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE and including 4mm thick teak wood beading alround, made to shape, fixed in position.

All as per Srl item No. 7.01 here-in-before but top of table dining 4 persons.

L-Shape wooden corner of size 4" x 4" x 1" to the Table between legs and rail to be fixed with screw.

Replacement of leg with S&F new teak wood leg made to shape

Replacement of long rail of table dining 6 Persons with S&F new teak wood long rails made to shape

Replacement of long rail of table dining 4 Persons with S&F new teak wood long rails made to shape

Replacement of short rails with new teak wood short rails made to shape

S & F new Nylon Buffer of superior quality with suitable screws for fixing.

Polishing one coat to old and two coats to old new surfaces to table dining 6 persons with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

All as per Srl item No. 7.09 here-in-before but table dining 4 persons.

TABLE DINING 6/8 PERSONS : FD-30, FD-239, FD-273, FD-376, FD-1115 Dismantle, take out carefully & replace old components of table dining. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of old existing broken top of table dining 8 persons of any description with S&F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE including 4mm thick teak wood beading alround, made to shape, fixed in position.

All as per item 8.01 here in but top of table dining 6 persons

Replacement of leg with S&F new teak wood leg made to shape

Replacement of long rail with S&F new teak wood long rails made to shape of table 8 person

Replacement of short rails with new teak wood short rails made to shape

Replacement of stiffener with S&F new teak wood stiffener under the top joining the top long side of top rails of table dining.

Replacement of long rail with S&F new teak wood long rails made to shape of table 6 person

Provn of new angular bracket 08 nos with steel screws suitable size of Ist class HW (teakwood) of size 125 x 100 mm x 25 mm complete as approved and all as shown on drg.

S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.

Polishing one coat to old and two coats to old new surfaces to table dining 8 persons with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

All as per item 8.10 here in but top of table dining 6 persons

TABLE 900 MM X 600 MM OR (3' x 2') (WOODEN) W/O DRAWER : FD-42, FD-55, FD-223, FD-231, FD-284 Dismantle, take out carefully & replace old components of table 3'x2'. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of old existing broken table top of Table of any decription & replacement of the same with S&F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with including 4mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position.

Replacement of legs of table S&F new leg made out of Ist class HW (teak wood)

Replacement of table frame's rail with S&F new table frame's long rail made out of Ist class HW (teak wood).

S & F new Stiffener.

Replacement of rubber shoe with screw (steel) with S&F new Nylon Buffer of superior quality screws (steel) of suitable size.

Replacement rectangutar braket with 08 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 100 mm x 100 mm x 25mm.

Polishing one coat to old and two coats to old new surfaces to table 3'x2' with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

TABLE 900 MM X 600 MM WITH DRAWER (3' x 2') (WOODEN) : FD-41, FD-224, FD-283 Dismantle, take out carefully & replace old components of table 3'x2'. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of old existing broken table top of Table of any description & replacement of the same with S&F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with including 4mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position.

Replacement of legs of table S&F new leg made out of Ist class hard wood (teak wood)

Replacement of table frame's rail with S&F new table frame's long rail made out of Ist class hard wood (teak wood).

Replacement of U/S drawer with new drawer of same size and shape to Table. Front of the drawer shall be made out of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE and including aluminium anodized knob. Sides, base and back of drawer made out of 12mm thick ply wood (ISI marked) and fixing all as shown in drg

S & F new Stiffener.

Replacement rectangutar braket with 08 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 100 mm x 100 mm x 25mm.

Replacement of rubber shoe with screw (steel) with S&F new Nylon Buffer of superior quality screws (steel) of suitable size.

Polishing one coat to old and two coats to old new surfaces to table 3'x2' with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

CHAIR DINING (JCO/ORS) : FD/MAP-II/05 Dismantle, take out carefully & replace old components of chair dining. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of old U/S front leg from existing Chair dining and S & F same size new front leg made out of Ist class hard wood teak to chair dining.

All as per srl item No. 11.01 here-in-before but rear leg of chair dining.

All as per srl item No. 11.01 here-in-before but front/ back/ side rail of chair dining.

All as per srl item No. 11.01 here-in-before but back rest (i.e. horizontal wooden members for back rest of size 45mm x 35mm ) of chair dining.

All as per srl item No. 11.01 here-in-before but stiffener between front leg to rear leg of chair dining.

All as per srl item No. 11.01 here-in-before but stiffener for jointing to side stiffener of chair dining.

Removing of old U/S/broken PVC seat from chair dining and S & F new PVC seat 4mm thick in single piece all as per shape and size shown on drg and as directed.

S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.

Polishing one coat to old and two coats to old new surfaces to chair dining with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

DRESSING TABLE (LADIES) INCLUDING STOOL FD/MAP-II/07 Dismantle, take out carefully & replace old components of table dressing ladies. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of handle with S&F new chromium plated handle as approved by the Engineer-in-Charge of best quality.

M & L for replacement of U/S sliding channel.

M & L for replacement of U/S 6mm thick back ply wood of mirror.

Replacement of back of table dressing ladies with S&F new back of table dressing ladies with teak wood veneered one side & commercial on other side.

Replacement of broken top of table dressing ladies of any description with S&F new top table dressing ladies of 18 mm thick pre-laminated particle board exterior grade, BWP (Natural teak wood shade), made to shape, fixed in position

Replacement of side of table dressing ladies with S&F new side of table dressing ladies with teak wood veneered one side & commercial on other side.

Replacement of door shutter of table dressing ladies with S&F new door shutter as per Drg

Replacement of drawer of table dressing ladies with S&F new drawer as per Drg

Replacement of wheels of table dressing ladies with S&F new wheels as per Drg

Replacement of hinges of table dressing ladies with S&F new hinges as per Drg

S&F new rubber shoe of superior quality screws (steel) of suitable size.

Replacement of cushion of Stool dressing with S & F PU foam cushion with 40 Density with Tapestry cloth as approved by EIC/GE of rate not less than Rs 300/RM.

Removing of old U/S looking mirror from table dressing ladies and S & F new looking mirror 5mm thick made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge

Polishing one coat to old and two coats to old new surfaces to table dressing ladies with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

M/s Manish Contractor

M/s Pal Construction