REPAIR/MAINT INCLUDING CLEANING OF SEWAGE LINE, MANHOLE, SEPTIC TANK, SOAK PITS UNDER ZONE B AREA AND PERIODICAL SERVICES AND REPAIR TO RCC CHAJJAS FACIAS COLUMNS, BERMS AND CONNECTED ITEMS TO INTERNAL/EXTERNAL SURFACE OF BLDG AND REPAIR TO WOODEN AL

Amount

Cleaning of sewage lines which are blocked /filled with sludge, semi solid/material etc by roding manholes to manholes manuually or by sewage line/manholes. Manhole covers and removing the sludge to a non inhabitant area or buried into ground all as specified for the following internal dia of pipe. Note :- (i) Sewage line cleaned should function smoothly during entire contract period and measurement shall be made only once. (ii) Contractor shall be responsible to clear any further blocagkage without any extra payment till completion of work.

150 mm dia

200 mm dia

Cleaning and de-sludging water/ liquid/semi solid sludge in foul position from soak wells of any size depth or width by mechanically with pump and filling in the covered tank mounted on truck (Honey Sucker) and disposing of the same out side of MOD land complete all as specified.

Cleaning and de-sludging water/ liquid/semi solid sludge in foul position from septic tank of any size depth or width by mechanically with pump and filling in the covered tank mounted on truck (Honey Sucker) and disposing of the same out side of MOD land complete all as specified.

Cleaning of blockage of any type of wc (Indian/pedestal) from WC pan upto Ist manhole in single/double storied bldg including resetting/refitting of asccess door in soil pipe where open without causing any damage to the WC pan 'P' or 'S' trap and pipe including fitting complete all as speciffied

Cleaning of blockage of any type in Nahani trap provided in bath room, kitchen and indoor water pipe of kitchen sinks and WHB and removing all the sludge and foreign material from the trap and waste pipe from blocked trap to gully trap/ surface drain wherever opened or without causing any damage to the trap and pipe including fitting distance of gully trap from outer wall of bldg upto 2m complete all as specified

Excavating in trenches n exc 1.5m wide and n exc 1.5m in depth, for foundation, etc. and getting out in soft/ loose soil complete all as specified.

Excavating in trenches n.exc 1.5m wide exc 1.5m and n exc 3m in depth, for foundation, etc. and getting out in soft/ loose soil complete all as specified.

M&L PCC M-7.5 (Nominal mix) using 40 mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm dia pipe complete all as specified

M&L PCC M-7.5 (Nominal mix) using 40 mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm dia pipe complete all as specified

Demolition of breaking up 150 mm dia drain pipe including fittings of any desciption in any position and removing rubbish upto a distance of n. exc 50m all as specified

Demolition of breaking up 200 mm dia drain pipe including fittings of any desciption in any position and removing rubbish upto a distance of n. exc 50m all as specified

M&L salt glazed stone ware drain pipe 150 mm bore grade 'A' laid in trenches and jointed with CM 1:1 complete all as specified

M&L salt glazed stone ware drain pipe 200 mm bore grade 'A' laid in trenches and jointed with CM 1:1 complete all as specified

Returning filling in soil including spreading levelling watering and well ramming in layers not exc 25 mm thick complete.

Removing excavated surplus materials to a distance exc 50 m and n exc 100m and depositing where directed a level n.exc 1.5m above the starting point complete all as specificed

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles

M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

M&L for Brickwork with old size flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified.

Taking down cement plaster from brick or concrete surface incl racking out joints hacking for key and scrubbing down with water complete all as specified.

M&L rendering 15mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

M&L for rendering 15mm thick on other than fair faces of brick work external faces in manhole in CM 1:4 including finishing the surfaces even & fair all as specified

M&L for preparing newly plastered surfaces of wall and applying two coat of Colour wash on walls complete all as specified & directed.

M&L for preparing newly plastered surfaces of wall and applying three coat of white wash on walls complete all as specified & directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for PCC M-15 grade (Nominal mix) using 12.50 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

M&L for PCC M-10 grade (Nominal mix) using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as directed.

M&L for PCC M-15 grade (Nominal Mix) using 20mm graded stone aggregate Providing, cement concrete in roof kerbs benching channel or mud stops, rounded or chamfered on edges finishing even and smooth without using extra cement complete all as specified and directed.

Demolition of reinforced cement concrete as in cover slabs of any description, removing debris outside MD land as directed complete.

M&L reinforced cement concrete M-25 grade (Design mix) as in slab supported on walls, beams and columns in floor, roof, beams and shelves etc for soak well/septic tank in running and manhole cover slab with plain fair faces and set in CM 1:4 condition complete all specified

M&L for use & waste of steel form work (rough finished flat) to soffits of concrete, roof slabs n.exc 200mm thick, shelves etc complete all as specified and as directed

M&L for TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingnends and bindingn with and includingnmild steel wiren (annealed) not lessnthan 0.9mm dia ornsecuring with clips

All as per item No. 30 above but 10mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete.

S&F in repairs 110 mm dia PVC (SWR) pipes type 'A' single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) pipes type 'A' single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) bends any radius complete all as specified.

S&F in repair 110 mm dia PVC (SWR) bends with aceess door any radius complete all as specified.

S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified.

S&F in repair 75 mm dia PVC (SWR) bends with aceess door any radius complete all as specified.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F 75mm PVC (SWR) vent cowl complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying one coat of white wash all as specified and directed by Engineer in charge.

M&L for preparation of old plastered surface of ceiling and applying one coat of white wash all as specified and directed by Engineer in charge.

M&L for preparation of old plastered surface of wall, removing nails & filling with POP and applying one coat of oil bound distemper on wall surfaces complet all as specified and directed.

M&L for preparation of old treated surfaces of wall plastered or unplastered and applying one coat of cement base paint complete all as specified and directed.

M&L for prepration of old painted steel surfaces, exc 10 cm width or girth and applying one coats of synthetic enamel paint all as specified and as directed by Engineer-in-Charge.

M&L for prepration of old painted wooden surfaces, exc 10 cm width or girth and applying one coats of synthetic enamel paint all as specified and as directed by Engineer-in-Charge.

M&L for obliterating old writing of any description with synthetic enamel paint n.exc 0.10 sqm each to match the existing work complete.

M&L for prepreation of old plaster suface of wall /over roof and applying one coat of weather proof acrylic exterior paint (100% Acrylic) including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for Writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 Cm high complete.

M&L for cement plaster 5 mm thick in CM 1:3 on concrete surface as on ceiling finished even and smooth without using extra cement complete.

M&L for rendering 10 mm thick on brick / concrete surface of walls in cement mortar 1:6 finished even & smooth without extra cement on other than fair finish surface complete.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash all as specified and directed by engineer in charge.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame, glazed with putty or fixed with beads complete.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty n.exc 0.50 Sqm in each pane complete.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty n exc 0.5 in each pane complete all as specified as directed.

S&F Welded steel wire fabric weight per square metre n exc 4 Kg. fixed to ceiling for plaster complete all as specified and as directed by Engr-in-Charge..

M&L for preparation of old decorated surface of walls and applying two coat of oil bound distemper all as specified and directed by Engineer in Charge.

S&F 32 mm dia PVC Waste pipe of any length fix to wall complete including fixing to waste coupling and to the grating complete including taking down old un servicable wast pipe.

Supply only liquid water proofing compound hydroseal-W+ / Dr Fixit or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE.

Removal of vegitaion plants girth n.exc 5 cm from the building and any height incl removal its roots and branch and making good the disturb surface in cm 1:4 completed

M&L for 50mm thick sand stone slab as in chajja /cover slab set and jointed over supports in CM 1:4 complete.

M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410(grade E 250 quality A)

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering. Make :- 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm all as directed.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sq. m each.

Taking down shutters of any description exceeding 1.0sqm and not exceeding 2.0sqm each all as directed.

M&L for powder coated (powder coating shall not be less than 50 microns of approved colour) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified including power coating.

Supply and fixing powder coated (powder coating shall not be less than 50 microns of approved colour) aluminium glazed shutter(for doors) with style and top rail of section 80 x 44mm, 16 Gauge thick and bottom rails of section 112 x 44mm of 14 Gauge thick, middle rail 150 x 44mm of 16 guage thick fixed on floor spring, both side opeining without sash bars but including 12 mm thick PVC sheet and necessary jointing cleats, rubber beading, anodized aluminium snap beading, screws, aluminium anodized handle, locking arrangement(mortised) and aluminuium anodised tower bolt 200 mm long complete all as specified. Note :- Floor spring shall be measured and paid separately.

S&F Powder coated (powder coating shall not be less than 50 microns of approved colour)aluminum window , ventilators cup bord shutters,sliding type without sash bar, aluminium section weighing 0.55 Kg/m inclding necessazry joining cleats glazing clips, rubber neoprene packing, roller, handles 2 Nos in each door, anodised aluminium snap beading screws, hook & eyes 100 mm etc. complete all as specified including powder coating all as specified and directed.

S&F in repair Aluminium (extruded section body) Bath door hydraulic door closer designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg Make :- Godrej, Universe, Doyen, Prince Doyen, Pearl

S&F sheet glass 5.5mm thick, ordinary quality and glazing in square n exc 0.5 sqm in each pane including solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Supply and fix in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Supply and fix 15 micron coloured aluminium anodised grill design no DG-117, 10 mm thick complete all as specified and directed by Engineer-in-Charge. Make : M/S Deco grill or equivalent with & including F sections,

M&L cement concrete M-10 grade (Nominal Mix) using 20mm graded stone aggregate as in blocks for fixing hold fasts and fillling of chowkhats or any other purpose all as specified.

M&L for cement concrete M-15 grade (Nominal Mix) using 12.50mm graded aggregate for filling in pressed steel door frames all as directed.

S&F 125x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

S&F 105x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

S & F 30 mm thick flush door shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 30mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete.

M&L 30 mm thick locally made made glazed and skeleton shutters of 2nd class HW, open rebated and prepared to receive glass/gauze etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR pt-1 section 8.20 (a) all as specified.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification & drawings in SSR Part II of 2020.

All as per item no.85 but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail & bottom rail Paneling plain colour PVC sheet to be fitted in MS frame welded/sealed to the stile & rails with suitable PVC sheet beading as per specification & shown on drawing in SSR Pt II of 2010 incl tower bolt Stainless steel 150mm – 2 Nos , hinges stainless steel 100 mm size – 3 Nos , handle Stainless steel 125 mm – 2 Nos for each shutter complete all as specified.

S& F factory made solid PVC moulded shutter , 28 to 30 mm thick ( stiles with 2,4 or 6 raised panel dsesign with 2 mm thick moulded prelam PVC sheet on the front face & 2 mm plain colour PVC sheet on back face all as specified in SSR 2010

S&F 100 mm size stainteless hinges medium weight cold rolled all as specified.

S&F 200 mm long stainless steel barrel tower bolts of extruded section complete all as specified

S&F 250 mm long stainless steel sliding bolt with hasp, staple (bolt type ) and fixing clips all as specified

S&F stainless steel, ISI mark, D type anodised 150 mm size as in repair complete all as specified.

S&F factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including one shop coate on red oxid primer.

S&F factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including one shop coate on red oxid primer.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for preparation of surfaces and applying two coats of synthetic enamel paint on new wooden surfaces of any description exceeding 10cm width or girth over a coat of pink primer all as directed.

M&L for preparation of new steel surface of any description, exc 10cm in width or girth when unconnected with other painting or when painted in a different tint with two coats of synthetic enamel paint over a coat of red oxide primer.

M&L for preparation of new primed steel surface of any description, exc 10cm in width or girth when unconnected with other painting or when painted in a different tint with two coats of synthetic enamel paint over a coat of red oxide primer.

S&F 2nd class HW small articles such as cleat / stopper for door / window incl all necessary laburs articles n. exc. 200 cu. cm each all as specified and fixed to chowkhats

S&F in repair stainless steel floor door stopper with rubber shoe 140 mm long complete all as specified and directed.

S&F in repair 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete.

Dismantling of timber Scantling 40 sq cm & over in section in any position in framed work in fillets, rails, posts, rafters, purlins

S&F timber framed & fixed second class hard wood wrough finished in scantlings use as in rafter and purlin

Distmaintling of AC sheet/Fibre glass trasulcent sheet (Corrugated, semicorugated, etc) sheet in roof covering complete .

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws complete.

S&F 0.80mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets.

Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications and as directed by Engineer-in-charge.

M&L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions

S&F in repairs for stainless steel grade 304, 20mm dia as in curtain rod including brackets, knob and all fixing arrangement.

M&L framed work as in doors or gates ,ladder ,cooler stand of angle , tee, round bars or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

M&L sheet glass 3 mm thick ordinary quality and glazing with wooden beading, in squares, rectengular in shape including hacking out old glass all as specified.

S&F 40mm wide 6 to 10mm thick rubber bidding fixed to door shutters with screw & washer as in repair all as specified.

M&L Brick work with sub class B bricks in one brick thick Honey comb work built in cement motar 1:4 complete all as specified.

Ms Kamal Kant Agarwal