PERIODICAL SERVICES AND CERTAIN B/R WORK IN H-WING, FASF LINE AND TRG AREA UNDER AGE B/R-II GE BABINA

Amount

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" /9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed.

M & L for water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface

M & L for one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and directed.

M & L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algai properties in two coats not less than 1.79 litre (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over primed surface with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.

Note for item No. 1 to 4 :- The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :- (a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc after approval by the GE. (b) The Contractor shall upload with the documents under cover I "Memoradum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (d) Removing of Nails, making good holes, cracks etc (e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (h) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

M&L preparing old decorated plastered or unplastered surfaces of wall, pilasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed. Note: All grass, trees should be removed from the chajjas, and wall during the time of white wash, No extra payment shall be paid to the contracotrs

Description same as per item No.6 above but on ceiling in lieu of walls complete all as spedified and as directed.

M & L for preparing old decorated plastered or un-plaster surfaces of wall, pilaster, cornices etc by brooming down or steel wire brushing, scrapping down smoke root moulds, moss and efflorehance salt and trading oil and greasy spot and applying one coat oil emulsion distemper on wall with existing colour match and all as specifed and as directed.

M & L for preparation of old decorated surfacees of wall by washing, rubbing down and stoping of painted surfaces and applying one coat of cement base paint complete all as specified and directed.

M&L for Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and as directed.

M&L for Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old painted surface fo brick, stone, concrete, asbesttos cement or plastered surface of any description over 10cm width or girth and applying one coat of Apex paint exterior grade, complete all as specified and as directed.

M&L for complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour and appying two coat of oil bound distemper inccluding prepration of surface complete all as specified and as directed.

M & L applying 1mm thick putty complete all as specified and as directed.

M&L preparation of old decorated surfaces and writting letters n.exc 30cm high (with black colour) including back ground n.exc 450mm dia (with yellow colour) complete all as specified and directed

M and l for repairing of RCC projection, chajja, facia, column etc by necessary preparation (i.e. scraping, cutting, chiseling, dusting and cleaning exposed reinforcement surface of damaged/ loose surface and applying one coat of cement slurry and filling the surface with plain cement concrete (1:1.5:3) reinforced with welded mesh and make good by15mm thick plaster with cm (1:4) and including scaffolding /formwork etc upto double storey height complete all as specified and directed by engineer in charge.

Demolition of cement concrete (unreinforced )in ground floor and paving n,exc 15cm thickness below or above ground level) complete all as specified and as directed

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping and on roof/benching over chajja etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:6) on brick/solid block masonry wall/ concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L 10 mm thick rendering in cement mortar 1:4 on brick work/RCC/ roof/ chajja or concrete surfaces, mixed with water proofing compound, surface finished even and smooth without using extra cement complete all as specified and as directed. ( Note:- WPC will measured sepretlly)

Supply only water proofing compound complete all as specified and as directed.

M & L 5mm thick rendering in cement mortar (1:3) on concrete surfaces of ceiling complete all as specified and a directed.

M & L Preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L Newly plastered surface and applying two coat of oil bound distemper and one coat of white putty on walls complete all as specified and directed.

M&L for Preparing new plastered surfaces and applying Two coats of cement base paint over primer on surfaces of walls complete all as specified and directed.

M & L for Preparing newly plastered surfaces of Ceiling and applying three coats of white wash complete all as specified and directed.

Repair/Re-adjusting of wooden window n. exc. 1.50 Sqm with all necessary hardware fittings like hinges,tower bolt,handle etc complete all as specified and as directed.

S&F in repair 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.

Dismantling of PVC or AC drain pipe jointed in cement mortar of size 100mm/75mm bore as directed complete all as specified and directed.

S&F in repairs 110mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed to walls //laid in floor complete all as specified and as directed by engineer in charge .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Sunken waterproofing Treatment by SmartCare Or equivalent in following steps :-(i). Surface Preparation: Minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using SmartCare SRP (ii). Making of angle fillets all around the periphery of the wall with polymer modified mortar using SmartCare SRP (iii). Supplying & grouting the gaps around the pipe / inserts with SmartCare General Purpose Grout, a non-shrink cementitious waterproof grout. The “Nahani” trap, etc is to be fitted securely in the same manner & the gaps around it to be grouted with non-shrink Grout or equivalent (iv) Supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, SmartCare Ultron liquid membrane and all as specified and as directed. Make- Aisan paint/ fosroc/Pidilite

M&L Plain cement concrete (1:5:10) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified.

M&L non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor including 15 thick cement mortar screed bed 1:4 complete all as specified and as directed

M&L glazed ceramic colour tiles 300mmx200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:3, complete all as specified and directed.

S&F in repair 15 mm bore stop vallve/angle cock cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union and fixed complete all as specified and as directed.

S&F in repair 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed (Make Prayag/Polytuf)

Cutting or uprooting grass/plant, removing rubbish of the premises and cleaning surface etc complete all as specified and as directed.

M/S ANIL TRADERS (BID ID -3276272)

M/s Ravi Traders (BID ID -3273790)