Provision of Vinyl flooring at NICU IPD building, OHT at AIIMS Nagpur

Amount

Providing and fixing Permanently Static Dissipative pressed homogeneous vinyl flooring (EN 649) ,anti-static, wear layer thickness is 2mm (EN429), PVC Vinyl flooring having Carbon backing a with total weight 3000 g/m2 (EN 430), XR PUR (polyurethane reinforced) ,Abrasion group P:≤4,0mm, residual indentation approx. 0,02 mm, castor wheel test qualified, dimensional stability ≤0.40%,static electrical charge < 2kv, good resistance of scratch, slip, chemical and fire, doesn’t favor in growth of fungi. Electric resistance is as per EN 1081 and ESD approved. Restorable properties. Available in rolls. 100% recyclable. Low VOC emission after 28days of installation (lower than ≤100μg/m3). Non Directional in Design. The flooring should be laid on the .05 mm thick copper grid having grid of the size of 1Mtr x 1 Mtr. The grid is connected with earth point. (Suitable for NICU flooring)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.: Thermo-Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts.

Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes with fittings.

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)

Supplying and fixing of interlocking PVC fluted wall Panel system (8-10 mm thickness) with superior grade adhesive, Fastening with Screw, finishing etc. and all accessories complete including making the wall rough before applying adhesive for proper bonding with the wall. The wall Panel shall be confirming to ASTM D-4477, Fire resistant, Moisture resistant, Anti-Bacterial, Termite proof. All the works carried out as per the direction of Engineer-in-charge. (Rate including Taxes, labour charges, Transportation and all)

K - LINQ HOSMED (OPC) PRIVATE LIMITED

M N DHANOLE ENTERPRISES