REPAIR/ REPLACEMENT OF PCC PATH, INTERLOCKING TILE, HARDSTANDING, FENCING WORKS AND OTHER MISC B/R WORKS UNDER AGE B/R-I OF GE 865 EWS AT LEH

Amount

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level and removing demolised material out of Military station. Complete all as specified and directed.

Demolition of cement concrete in any description and any position not otherwise specifically provided for. Complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), all as specified and as directed

Dismantling chain link fencing/expanded metal or mesh not exceeding 4kg/Sqm fixed in steel, wood fillets, concrete post etc. of any description. Complete all as specified and directed.

Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed

S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers in roofs walls etc. with grade of zine coating 275. Complete all as specified and directed.

Ditto all as item No 06 above but except sheeting. Complete all as specified and directed.

S&F Pre painted galvalumealuminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws Complete all as specified and directed.

Ditto all as item No 08 above but except sheeting any thickness. Complete all as specified and directed.

S&F Fibre glass reinforced translucent plain sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof ,wall etc complete all as specified and as directed

Ditto all as item No 10 above but except sheeting any thickness. Complete all as specified and directed.

S&F 0.63mm thick plain galvanised mild steel sheeting as in ridges hi, valley gutters drip and straight flashings (length and girth as fixed) with L or J hooks or coach screws with grade of zinc coating 275 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for. Complete all as specified and directed.

Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc all as specified and Complete all as specified and directed.

M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 Complete all as specified and directed.

Ditto but except blocks. Complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed

M&L for 15mm thick rendering on fair faces of brick works finished even and smooth with water proofing compound 3% of cement without using extra cement in cement mortar 1: 4 complete all as specified and as directed

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L for preperation of new plastered wall surface of any description and applayng two coat of cement based paint over a coat of chalk whiting complete all as specified and as directed.

M&L for preperation of old plastered wall surface of any description and applayng one coat of cement based paint complete all as specified and as directed.

M & L for 100 mm thick PCC 1:3:6 type C-2 using 20mm graded crushed stone aggregate as in floor of hard standing finished even and smooth with out using extra cement Complete all as specified and directed.

M&L Hardcore with boken stone of gauge n exc 63 mm, deposited, spread and levelled and layer n exc 15 cm thick, water and rolled /rammed to a true surface Complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 20mm graded crushed stone agg) 75mm thick sub base of floor etc Complete all as specified and directed.

Supply only plastic dividing strips,1.5 mm thick and 38mm wide inserted in position confirm to design Complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in floor surface of hard standing complete all as specified and directed.

M & L 15 mm thick screed bed in cement mortar 1:4 screed bed or bedding layer of mortar for laying floor finishes Complete all as specified and directed.

M & L vetrified cearmic tiles 10 m thick (double charged ) square /rectangular polished area of each tiles exc 0.36 sqm but notexc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colours of tiles all as specified and directed.

M&L for Cement concrete type B-2,1:4:8 (40mm graded crushed stone aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc.. complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 80mm thickiness M-35 grade complete all as specified and as directed

M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickiness M-35 grade complete all as specified and as directed

M&L sand filling (50 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and as directed

M&L for Cement concrete type B-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc.. Complete all as specified and directed.

M&L for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments layed over 20mm thick cement screed base (1:6) and all as directed

M&l for PCC type D-2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation all as specfed and drected.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required Complete all as specified and directed.

Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed

Dismantlng wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton.(Framed work) Complete all as specified and directed.

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed.

M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed.

M&L in repair for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

Ditto as above but on ceiling complete all as specified and as directed

Dismantling boarding/ wooden flooring of any description, fixed in any position Complete all as specified and directed.

M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planned one side & edges tonged and grooved or rebated, including backing with thermocol sheets or as specified and directed.

M&L for preperation of new surface on Brick,Concrete,Wall and Stone surface of any description descripton and applying two coat of synthetic enamal paint over a coat of primer complete all as specified and as directed.

M&L Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing boltsposts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 as directed and fixed Complete all as specified and directed.

M & L for Excavating in post holes in so(or similar holes) each n.exc 0.5 cum in hard/dense soil , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm. Complete all as specified and directed.

M&L for PCC type D-2, (1:3:6) , using 40mm graded crushed stone aggregate as in lean conc , sub base ,or mass conc , foundation filling etc. Complete all as specified and directed.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards,rails, straining bolts,etc.including provision of binding wire. Complete all as specified and directed.

Supply only chain link MS galvanised fencing of size Complete all as specified and directed.

Dismantling of old barbed wire and making rolls including stacking neatly complete all as specified and directed

S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) incl removal of old unservicebale barbed wire. Complete all as specified and directed.

M&L for PCC type B1 (1:2:4) using 20 mm graded crushed aggregate in CM 1:4 for coping ,mass concrete. Complete all as specified and directed.

M&L cement concrete Type C21:3:6 (40mm graded aggregate)in Surface channels and drains all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc. Complete all as specified and directed.

Extra for forming fair finished drain or channel 55cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc. Complete all as specified and directed.

M&L for precast RCC (1:1½:3), nominal mix, type A-1 uising 20 mm graded stone aggregate as in cover slab of drain set in cm 1:4, complete all as specified and as directed . Note:- Reinforcement shall be measured seperately

Mild steel TMT bars10mm dia and over (for tie bar of chain link fencing), cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips . Complete all as specified and directed.

S&F mild steel screw bolt 5 to 10 mm dia (machine made) with hexagonal head at one end and screwed the other, screwed end to be fitted with one waher and hexagonal nut length exc 5cm but not exc 10 cm long. Complete all as specified and directed.

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering. Doors, etc, to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel,) sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complet, Fe 410-W (Gde-E-250) quality A Complete all as specified and directed.

M&L preparation of newly or previously untreated steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Schedule of Credit

M/S UNITED CONSTRUCTION CO.

Rampal Singh Contractor

PARIDHI CONSTRUCTION

M/S MUNEER HASSAN AKHON

Mehar Enterprises

M/S TRADE LINK